HP ENVY Phoenix 810se Office does not

Hello

I have not found any recent message on the desktop computer HP ENVY Phoenix 810se with Windows 8.1.

My desire is currently blocked in the screen just after the symbol HP is displayed. PC boots, HP symbol appears, "Please Wait" appears wth points circling on a black screen, the screen goes blue - where is it stays. Nothing that I don't alter unless I hit the power button.

It started last night. I am logged in as usual, intervened after the Sons of Anarchy watch DVR i had. When I got home 20 minutes later, I saw 4 lines of the repeated statement. Discuss something in the direction of boot not found.

Any help would be greatly appreciated.

Best,

Dave

Steadyhand, welcome to the forum.

The error message that you normally receive means that the hard drive has failed.  I suggest running SMART , from the BIOS.  This will tell you if it failed.

Please click on the Thumbs up button '+' if I helped you and click on "Accept as Solution" If your problem is resolved.

Tags: HP Desktops

Similar Questions

  • HP envy Phoenix: win 7 does not start with connected external hard drive

    I have a desktop HP Envy Phoenix with i7 chip and an SSD for the OS.  If I connect via USB external drive of 3 TB WD for the backup of the system does not start while it is attached.  The pc seems to be trying to boot from the outside, can't find the OS and does not start.  It will start fine with small external drives connected.  It is the size of the disk? Is there a way to fix this?

    Hello

    The WD drives seem to pose problems of my potential.  I have used other brands such as Seagate and Hitachi without running into problems with external USB drives causing the system to boot.  Maybe it's the USB adapter that I use which does not cause starting problems.

    @tpetras

    I used the adapter HP USB 3, which uses drivers NEC or TI and has never had a problem starting via a USB external (non - WD) readers.

  • My office does not send signal to monitor

    HP Pavilion a6200t and Desktop HP vp17 monitor

    My office does not send signal to monitor. I use the monitor to another computer it works fine.

    Problem 3 months ago.
    I clean the inside of the desktop with the compressed air bottle.

    Very important, I clean the contacts of the RAM with a cloth of cotton soaked in 95% alcohol.

  • GeForce GTX 770 runs on the HP Envy Phoenix 810SE?

    I am considering buying the HP Envy Phoenix 810SE and I want to configure it with the i7 - 4930K (optional) Hexacore and 2 GB of Nvidia GeForce GTX (optional) 770. However, the power of this model is only a low 500 watts - however the recommended minimum power for the 770 according to Nvidia GTX is 600 Watts it consumes typical of 230 watts.

    My question is how this platform may run the card at all?

    I mean I'll take Hexacore i7 - 4930K which consumes 105 watt just by itself, add in 2 hdd (35 watt) as well as a dvd player + motherboard and memory. I don't see how this configuration may work.

    Any thoughts?

    Thank you

    Jorge

    Hello

    power max is just what components are going to shoot when they are maxxed out.

    You can get away with running this solution, but if the execution of some heavy games can draw more power than the system can handle.

    If this is the case, you may need to upgrade the power supply.

    on the drives, you can run an SSD that will consume less energy than your spinning disks.

  • My shortcuts Office does not, to the left or right click nothing.

    My shortcuts Office does not, to the left or right click nothing.

    My shortcuts Office does not, to the left or right click nothing.

    Suggestions:

    1 rebuild icon cache. Yours could be damaged.

    http://www.SevenForums.com/tutorials/49819-icon-cache-rebuild.html

    2. If this is a recent problem, and if you remember one ate when shortcuts worked ok, do a system restore.
    Choose a date where shortcuts worked as your restore point.
    http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

    3. restore explorer.exe

    Press CTRL + Alt + Delete > Task Manager > processes tab > right click on explorer.exe > click on end process > Applications tab > new task... > in the Open box, type explorer.exe > OK

     
  • I got a notification of update for adobe CC but it does not work and now the Office does not

    I got a notification of update for adobe CC but it does not work and now the Office does not

    I actually just finished with support on a cat and it was corrected. Thank you.

  • Mid creative cloud office does not work so I can´t download apps.

    Hello! Mid creative cloud office does not work so I can´t download apps. Could you help me please?

    Captura de pantalla 2015-07-07 a las 10.30.49.png

    Please, try the following steps:

    1. uninstall the application Adobe CC of the machine (https://helpx.adobe.com/creative-cloud/help/uninstall-creative-cloud-desktop-app.html)

    2 set the "Read and write" permissions on the files of Adobe for all users in the following locations:

    a. / Library/Application Support /.

    (b) /Users/ [user name] / Library/Application Support /.

    3. restart the computer.

    4. install the application Adobe CC (Creative Cloud help |) Creative cloud for office)

    Kind regards

    Sheena

  • My office does not start

    I have a lack of treo 680 unlocked and installed in sync software on my new macbook pro leopard.  I started to use the synchronization feature and if used to the weird (compared to the desktop on windows) presentation Office when I noticed that I wass get all kinds of duplication and even triple jobs over my clocks.  I ttied to solve this problem with the missing sync help but nothing helped. I decided to try again.

    So I uninstalled missing sync andI I went back to my PC and cleaned my laptop with my desktop PC.  I couldn't uninstall desktop for mac, so I reinstalled missing sync and made a hot sync.  I then noticed that I would have the same problem I got a notice of missing sync I got more than 5% of sync to do.  I was wondering how this could be because it was supposed to be a new synchronization with any info on my desk. I stopped the hot sync function and tried to see what was going on by opening my computer desk.  I tried several times. I tried to download to new desktop mac and re - install.  That has not worked, I kept getting the message that I got the latest version on my mac and I couldn't re - install.

    Which brings me to my original topic statement.

    My office does not start while I can clean or do a sync again.  Please someone help!

    Jonesp

    Hi again to AlanG.

    Evreything seemed to have worked OK but I guess I'll know for sure when I do the second sync.  So far so good.

    I just wanted you know also that you can't substitute the missing sync conduits, they always synchronize.  That is why I will also keep a last copy synchronized on an old utility with windows computer that I have not managed to get rid of even while I always copy a maximum of 1 day old.

    Thank you again for helping me so quickly and have been available to respond to me several times over the past day.

    Best regards

    Stone

    Message is about: Treo 680 (unlocked GSM)

  • Get this error "The Office does not support the requested protocol display."

    Just built a new environment of view 4.5 and became "The Office does not support the requested protocol display" when trying to use the client to connect through PCOIP, but works very well with RDP... What Miss me?

    Wwill price points righ away.

    When you installed the Agent of 4.5 view you ensure that PCoIP components have been selected?

    -Mike

  • HP ENVY 15 t-k000 CTO Notebook: HP Envy My network adapter does not support gigabit speeds. Is there an upgrade available?

    My HP Envy 15 t-k000 works very well, but it is slow. I thought it was my internet until I did some troubleshooting and discovered that I don't get the super fast speed that I'm supposed to receive this is because my computer does not have a fast enough network adapter. He's currently the Qualcomm Atheros AR9485 it came with. I watched the maintenance manual and could not find an upgrade. Is there a module I can replace with allowing for speeds 1 G?

    The part number for the laptop is G0T55AV.

    Thank you!

    Hello:

    The adapter you mentioned... Qualcomm Atheros AR9485 is the wireless network card, and I do not think that this card connects everything faster than 72 Mbps.

    Your laptop comes with the card Realtek 10/100 ethernet (wired) and it cannot be upgraded because the ethernet chip is part of the motheboard.

    If you want a gigabit ethernet connection, so I advise you to buy an external USB to RJ-45 gigabit ethernet adapter.

    You won't find any wireless card that will go beyond the rate of 867 Mbps AC, and you would need a router ca to achieve these speeds.

    You would also dismantle the entire notebook to replace the wireless card and if your laptop has a single antenna attached to the atheros wireless network card, you will not be able to upgrade to the fastest wireless card.

    A proper AC map would be the Intel 7260 wireless card if your mobile phone has two antennas attached to the atheros card.

    http://www.Intel.com/content/www/us/en/wireless-products/dual-band-wireless-AC-7260-Bluetooth.html

  • HP Envy 4501: Ink cartridge does not

    My HP envy 4501 claim that the new real black HP61xl ink for older generations. Its identical to the empty cartridge, I deleted. But I can't get the printer to accept

    HP has changed the design of cartridges HP 61xl some time ago.  The new version works in older printers but new printers (for example, envy 4501) will no longer accept new versions of the cartridge. Here it describes this change.  If contacting HP does not solve the problem to your satisfaction please post here.

  • HP ENVY 7640: wireless radio does not want 7640

    Buy this printer recently worked for about 20 minutes.  The printer says THE WIRELESS RADIO NOT FUNCTIONING.  Advice or should she be returned.

    Hi @HAYHEATH,

    Thank you for visiting the Forums from the HP Support! I see that you have found a "Wireless Radio does not" error message on your new HP Envy 7640.

    Contact our technical support HP 800-474-6836 because this can be a hardware problem. If you do not live in the United States / Canada region, please click the link below to get help from your region number.

    http://WWW8.HP.com/us/en/contact-HP/WW-phone-assist.html

    I hope this helps!

  • Envy 15 j139tx: fingerprint does not work after the upgrade to windows 10

    I have improved my ENVY 15 NoteBook Windows 8.1 for windows 10 j138tx. But after the upgrade of my fingerprint also does not work. I have updated software driver and it shows as follows.

    And the unit is also working (it is said ;-))

    But I can't add my fingerprint in sign in option. It does'nt allow me to set up.

    And when I open simple passage, it shows me after the error message.

    can someone please help me to reactivate it?

    Hello

    Open windows control panel, open programs and features, make entry for HP SimplePass right click and select uninstall.

    When this has completed, restart the laptop.

    When windows has reloaded, download the version of HP SimplePass on the following link and save it in your downloads folder.

    http://ftp.HP.com/pub/SoftPaq/sp71501-72000/sp71729.exe

    Once the download is complete, open your downloads folder, right click on the installer SimplePass and select "Run as Administrator" to launch the installation.

    Once again, when this has completed, restart the laptop.

    When windows has reloaded, open windows control panel and on the top right, next to the display by: select "large icons".  The new layout, select the HP SimplePass entry and see if you can set your footprint digital log - on.

    Kind regards

    DP - K

  • HP Envy 14 HEADSET MICROPHONE DOES NOT WORK

    Hi, I have a HP Envy 14-1111 nr laptop computer with Windows 7 and I always had problems with working microphones. I plug in my headphones and put plugs in the appropriate ports, including through taking Mic in port with a picture of a headset/microphone. I also put the audio plug on the correct port.

    The audio still works fine I can hear things properly from the helmet. But the microphone NEVER WORKS. I made sure the microphone is on and I put the headset microphone as the default recording device, and made sure it's not muted and even tried like 3 different types of helmets, but it still does not work.

    My computer recognizes my headset has a microphone when I plug it, because the independent headset appears on my recording devices. But any point the noise I into the microphone, my computer does not recognize him. Basically, it is saying that it cannot detect all the sounds of the mic.

    It's incredibly frustrating because I spent money on different microphones, but now I think it's the fault of my computer. Is there something wrong with the microphone/headphone jack? What can I do to fix this?

    Thank you.

    Solution: the HP Envy laptop is not a microphone jack, it has a "headphone" which is designed to work with smartphones.

    In order to use a headset with microphone with this computer, you need a conversion cable so that you can convert your helmet at the exit of the smartphone. I just ordered it on amazon, it should be here soon.

    http://www.Amazon.com/headset-buddy-01-PC35-PH35-smartphone-BlackBerry/DP/B002SK66OY/ref=sr_1_4?ie=UTF8&QID=1367377726&SR=8-4&keywords=headset+to+Smartphone

    Boring, but at least I think it is resolved.

  • Product key for Microsoft Office does not work

    Hey.  The product key at the bottom of my laptop does not for my Microsoft Office 2007 check my license.  I had the computer over a year when I first tried the product key and I was wondering if he could have expired or something.  The message I get actually says it's an invalid product key.  Any help I could get with this would be much appreciated.  Thank you.

    http://www.Microsoft.com/Office/offers/default.mspx

    The product key on the bottom of your laptop isn't for Vista, Office 2007.

    You'd have a trial version of Office 2007 pre-installed on your laptop.

    To continue to use Office, you can buy licensed copy of it.

    Buy from the link above, or check your computer local local store. Mick Murphy

Maybe you are looking for