start failing after installing Windows XP firefox 12.0: error message: "the configuration is incorrect."

Similar Questions

• When you try to install Windows Defender I get an error message "Service"Windows Defender"(WINDEFEND) could start. Make sure you have sufficient privileges to start system services.

  Original title: could not start the Service "Windows Defender" (WINDEFEND)

  When you try to install Windows Defender, I get an error message that

  "Service"Windows Defender"(WINDEFEND) was able to start. Make sure you have sufficient privileges to start system services.

  How can I check which privileges I have and I need?

  I noticed in the management of the tasks that Norton symlcsvc.exe ran and I was wondering if it was who collide with the Defender, so I temporarily stopped Symantec process running in the field of Services, but still had the same result, try to run the installation of the Defender.

  Help please

  Hello

  This error message is because you have Norton installed on the computer. See the for more information section below.
  http://www.Symantec.com/business/support/index?page=content&ID=TECH103119&locale=en_US

  Let's try the steps and check them off below if it helps.

  Step 1: You can try to uninstall Norton and then check if the problem persists.
  Note: Reinstall Norton after verification.
  Reference: http://support.microsoft.com/kb/307895

  Step 2: Change the registry value and check.

  a. Click Start, type regedit.exe and press ENTER.
  b. navigate to the following location: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows Defender\
  c. right-click on DisableAntiSpyware, on the right panel, then selectEdit.
  d. enter 0, under value data, and click on the OK button.
  e. close the registry editor.
  f. restart the computer.

  Registry warning:
  Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows: http://support.microsoft.com/kb/322756

  Thanks and greetings
  Umesh P - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• After installing windows optionally updated my display driver is the cause of problems

  I have DELL Inspiron 14 with windows 7 home preium

  After installing windows optionally updated my display driver is the cause of problems
  Ran troubleshooting it says "material changes could not have been detected.
  Help, please
  Thank you

  Use the function "restore" to restore your system to a point before installing optional updates in windows.

  After that, go to Windows Update and 'hide' the update that caused the problem.

• Each installation of the PATCH fails after installing Windows updates

  Hello

  I would like to report a problem, I think it's a bug of Windows introduced by one of the Windows updates (unfortunately I could not know who of them).

  Here's the test scenario:
  1. install a fresh copy of Windows on a test computer
  2. install all the Windows updates available (so the system is up-to-date)
  3. create a sample MSI installer that installs only some dummy files (let's say Product Version 1.0.0) and host on a web server

  4. install the MSI from the online location using a command line like this:

  msiexec /i http://server/share/package.msi

  5. create a. Patch MSP (e.g. v1.0.1) which only adds a new file to v1.0.0
  6 install the patch v1.0.1

  RESULT: the installation of the patch fails with the following error message: "the file name, directory name or volume label syntax is incorrect."

  NOTES:
  1. the question has replicated to Windows 7 and 8 machines updated
  2. the question is not replicated on a new install of Windows without updates applied

  Is anyone aware of what may cause this error? Once again the patch installation fails only on Windows computers with the latest updates installed.

  THX,

  Daniel

  Hello Daniel,.

  Thanks for posting in the Microsoft Community.

  I suggest you post your question in the MSDN forums:

  Check out the link:

  https://social.msdn.Microsoft.com/forums/en-us/home

  Hope this information is useful. Please do not hesitate to answer, in the case where you are facing in the future other problems with Windows.

• CD/DVD on Satellite U500 drive failed after installing Windows 10

  My CARPET * drive dvd DVD - RAM UJ862AS failed after W10.

  I told myself I need Toshiba ' * 86 device ACPI Compliant added logic and general use "BEFORE I can install the driver for the DVD drive.
  I tried Microsoft idea to remove the pilot of regedit and restart the laptop that should logically result in reinstalling the driver... with no luck.

  I'm about to give up the laptop but am wondering if anyone can help me?

  I am extremely reluctant to lose a lot of money on several unnecessary drivers (generally unreliable) providers!

  U500 is old piece of hardware and not supported for Win10, right?

  In any case, what is the status in Device Manager? Is ODD listed here or you just entered with device "unknown"?

• Receive the message to install Windows Live Essentials 2011. Error message - I have a "taste of different construction of Windows Live"

  I use Windows 7. I received several reminders to install Windows Live Essentials 2011. When I try, I get the error message that I have "a taste of different construction of Windows Live". Everything works fine. If I do not need to install the update, it is fine. Just do not know what to do. Thank you! Julie

  You can find support for the installation/uninstall/upgrade Windows Live Essentials in this forum: http://answers.microsoft.com/en-us/windowslive/forum/wlinstall

  Or see...

  Windows Live Essentials Help Center
  http://Windows.Microsoft.com/en-us/Windows-Live/Essentials-Help-Center

• Vista 32 bit can't install or update ALL drivers. Error message: "the system cannot find the file specified."

  I also have problems with installation or update all drivers. I keep getting the same error message as everyone another (Windows found driver software for your device, but has encountered an error trying to install it.) The system cannot find the specified file. ") I am currently running Windows Vista 32-bit. Did anyone facing this problem? I can't believe that it has not been yet resolved. ?? I tried to install the drivers from a Web site of the manufacturer (canon), update the driver from windows, cd rom and my USB port. Nothing works. I not made any changes to my laptop and I have to download/install updates regularly.  Come to think of it, I think that this has been a problem for a long time that I was not able to install an update on my 8400 M GS of Nvidia G-force several months > it continues just failing. I checked today and the driver needs to be updated... but I can't update any of them. Did someone really treats problems in this Forum? We could really use some help on this issue!

  Hello

  Have you made changes on the computer?

   
  Method 1:
  You try to install the driver to boot, to troubleshoot error messages and other issues, you can start Windows Vista by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: After a repair, be sure to set the computer to start as usual as mentioned in step 7 in the Knowledge Base article.
  
  Method 2:
  You can also check the link provided and check:
  You cannot install a device driver by using its installation program for Windows Vista
  http://support.Microsoft.com/kb/927524
   

• Try to install Windows 8.1 and get error message: boot disk cannot be partitioned

  I am trying to reinstall Windows on my Mac 8.1 and get the message error "boot disk cannot be partitioned or restored to a single partition.  I ran across the 'bugs' usual suggested, that I found online with no luck.  Attached are the screenshots that can help.

  

  

  

  

  How have you managed to get two HDs of recovery on the same disc? You have two versions of OS X installed on this drive in the past?

• While trying to install Windows XP, I get an error message that the files are missing.

  problems with reinstallation

  I have a laptop from my father in law. He still had his personal information on it so I tried to do a reinstall of xp from my cd. I did a format and begins to install. Then it appeared that there are missing files, and he did not finish the installation. Download a copy offline, or I have to purchse a new cd in a store?    Thank you jennifer

  It's not really answering your specific questions but most laptops come with a hidden restore partition that will put the laptop to a State "day one." Who can be the best option because it normally loads all the necessary drivers and applications too.

  If you have published or look for the brand and model of the user manual it will detail the recovery options. A reinstall like this formats the HARD drive and start again.

  Or did you specifically want X.P. and the lappy was initially delivered with Vista or W7

• Problem with rename folders in Windows 7: get this error message: "the action cannot be completed because the folder or file is open in another program. Close the folder and try again. »

  When I try to rename a folder in Windows 7 I get this error message: "the action cannot be completed because the folder or file is open in another program. Close the folder and try again. "Can anyone help?

  I gave up and solved the problem by buying a third party software to use as a directory, Directory Opus.  It is much more functional than the Microsoft Directory and I have never problem renaming of files.  I am just amazed that so many people have this problem and Microsoft has not fixed.

• Computer OS used to start after installing windows 10

  Hello im having problem starting my system after installing windows 10. I did the install and it worked fine since the upgrade to 8.1. But then I tried to format the drive and in the menu format, he's stuck at 2%, and then I restarted the computer. Now it will hang at the hp logo and go back to the same logo. Do I have to replace my hard drive?

  What I understand, if you have completed the 10 Windows Installer and everything has happened until the end, then you are supposed to be able to do a clean install with the download of Windows 10 DVD or USB.  With a working computer, GO to THIS PAGEand scroll down to the button "download tool" selection the 64-bit version.  Once clicked, it will ask you if you want a DVD or USB for the iso.

  Once it's done and you have the DVD or the USB version, see if you can install Windows 10.  If this fails, you may need to replace the hard drive.

• SD card is not working properly after installing windows 10

  I have a MacBook Pro (retina, 13 inches, early 2015) with EL Capitan 10.11.5 and after I installed 10 windows using bootcamp, everything worked fine at first, but after I deleted my part of windows and then installed windows 10 the second time, the SD card is not working properly. She mounts only if the computer shuts down first, and then start. If I take the laptop directly, the SD card will not rise. The same thing happens when I switch systems using a control option key or bootcamp Center where when I switched to another system, the SD card that was mounted on the old system does not appear in the new system. I was trying to solve this problem remove the part of windows before you reinstall it again once, so I found that after I deleted the windows part, the problem is gone and it reappeared after installing windows 10 even once. I also found that after I installed windows the total volume of hard drive (128g front) became 121g.

  Hello LorinMax,

  Thanks for this info and choosing the communities Support from Apple. I know the importance of your work with your Macbook Pro SD card!

  If I understand correctly, you cannot use your SD card, unless you stop and then restart. Because this behavior started when you installed Boot Camp, I would start with the following steps:

  1. first of all, start by repairing your hard disk in disk utility to correct the unexpected problems that could be the cause of this behavior.

  Disk utility (El Capitan): a disc repair

  2. use Mode without fail to start up your Mac so that it performs certain checks, remove files from the system cache, check your startup disk and trying to fix problems if necessary directory.

  Try safe mode if your Mac does not end commissioning

  Graphics performance limited in recovery of OS X or in safe mode

  3. According to Boot Camp Installation & Setup Guide, you may need to back up your personal data and reinstalling OS X, then reinstall Windows via Boot Camp and related support files.

  Boot Camp Installation & Setup Guide

  Backup of your Mac hard drive

  OS X: on OS X Recovery

  See you soon!

• Error message: "the address book failed to load. Outlook Express is incorrectly configured, please re-install. "at the start of XP and the machine.

  After uninstalling my XPSp3 o.e., I started getting the following error message: "the address book failed to load. Outlook Express is incorrectly configured, please re-install. "at the start of XP and the machine.

  Uninstalling included 7 entries registry to remove all the * files dbx and files *.wab addressbook, except himself. After uninstalling and receipt of the error message above, I tried to use my CD of XP OS to re - install O.E. as a component of Microsoft without success.

  I upgraded to Outlook 2007 and imported to the address book of O.E. successfully before uninstalling.

  Please advise me how to get rid of the error message always appearing at startup.

  Thank you

  You can't really uninstall and reinstall OE without having to reinstall XP as OE is a part of it. I hope your foray into the registry does not require a reinstall of XP.
   
  You now have the DBX files? WAB files?
   
  If Outlook has been on your machine before this event, see the reference by PA Bear in this thread
  http://social.answers.Microsoft.com/forums/en-us/xpnetwork/thread/a8c8cf17-d792-481e-BCCA-13b03852a995
   
  If Outlook has not been installed, see these.
  
  Courtesy of Michael Santovec:
  http://pages.prodigy.NET/michael_santovec/techhelp.htm
   
  All of you who have the same cause.  Something is screwed up with your address book.
   
  It could be several specific problems, which include:
  -corrupted WAB file
  -damaged or incompatible DLL files for the addressbook
  -have OE set to use the Outlook98 / 2000 + contacts instead of the WAB
  folder and there is something wrong at the end of Outlook
   
  For more details, take a look at:
   
  Error message: the Message could not be sent. Some invalid recipients
  (Outlook Express: there was an error opening this message)
  (The address book failed to load. OE is configured incorrectly)
  (Corrupted or incompatible WAB32. DLL file)
  http://support.Microsoft.com/?kbid=239135
  OLEXP: Error Message: failed to load address book
  (There was an error opening this message)
  http://support.Microsoft.com/?kbid=269777
  http://support.Microsoft.com/?kbid=310873
  OLEXP: MSIMN has caused an IPF in Module Wab32.dll
  http://support.Microsoft.com/?kbid=247706
  Error message: failed to load address book, Outlook Express is...
  http://support.Microsoft.com/?kbid=191946
  Error message: could not open address book, a component is missing
  http://support.Microsoft.com/?kbid=192321
   
  The address book Windows (WAB)
  http://www.insideoe.com/files/WAB.htm
   
  To share Contacts between Outlook and Outlook Express
  http://www.slipstick.com/contacts/oeshare.htm 

• I don't see the desktop icons after installing Windows updates.

  Original title: connection user init failure

  I m using windows 7 pro. After installing the updates, I have problem with the icon on the desktop .i has no icon on the desktop when you connect. get the message the CONNECTION USER INIT FAILED. After pressing ALT + CTRL + delete > taskmanager > run > Desktop Explorer icons is displayed... .i tried many time to solve this problem of the customer service, but they are unable to solve this problem. Please please help

  It is not possible for me to every time the format of the system

  kindly, please give solution.

  My system is connected to the network with 3 PCs and all are licensed copy.

  Hello

  Welcome to the Forums Community Microsoft and thanks for posting the question.

  According to the description, you get an error message "FAILED CONNECTION USER INIT" after installing Windows updates.

  From my research, this problem occurs if the Userinit key in the Windows registry has been changed. For example, this problem may occur if the Userinit key has a value, but no binary data.

  I suggest you follow the steps mentioned below.

  Method 1:

  Step 1: Start the computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  Step 2: Check the value and binary Userinit registry data

  Important: The following instructions contain the steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information, view the article in the Microsoft Knowledge Base:

  Back up the registry
  http://Windows.Microsoft.com/en-us/Windows7/back-up-the-registry

  a. start Registry Editor. To do this, click Start, type regedit in the search box and press ENTER.

  b. click continue.

  c. Locate and then click the following registry key: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon

  d. in the right pane, right-click Userinit, and then click change.

  e. in the value data box, type hard disk:\Windows\System32\userinit.exe, and then click OK.

  Note: The placeholder of the hard drive refers to the drive on which Windows Vista is installed.

  f. close the registry editor.

  g. restart the computer.

  Method 2:

  Restore the system to an earlier point before installing this application.

  
  http://Windows.Microsoft.com/en-us/Windows7/what-is-system-restore
  System Restore can return your files system to a point in time before you noticed a problem, without affecting documents, photos, or other personal files. If the system restore does not resolve the problem, you can undo the restore operation and choose a different restore point.
  
  More information on:
  
  System Restore: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows7/system-restore-frequently-asked-questions

  Hope this information helps. Get back to us if you have more queries about Windows.

• Problems of Jet 7 HP recovery after installing Windows 10 TP

  Hi all

  A month ago I bought the HP Jet 7. Soon after receiving it, I installed Windows 10 TP, without first create and save an Image of the system to an external drive recovery. While playing with Windows 10 TP, suddenly the touch screen doesn't work anymore, as well as WLAN. The SD card is not recognized eiter (and I can't boot from it). I now can with Windows only when you attach an external USB keyboard. I can't get into the BIOS (power-Volume-down).

  I tried to go back to Windows 8.1, so far without success. I tried the regular Windows recovery mechanisms - all fail. When booting from a USB 2.0 with 8.1 32-bit of Windows Installer source attached to a USB hub powered by bus, at least, I'm able to boot, and I see that your partition 4 is a recovery partition. Yet, when you mount the partition (via DISKPART) to check for recovering images in the 'Images of Windows' folder I only get "access denied".

  Does anyone have tips on how to do to get my stream of HP 7?

  Thanks for reading!

  / Maurice

  Hi all

  After you remove all of the partitions and create the recommended UEFI/GPT partition , I was finally able to install Windows USB 8.1. I guess the reason for all the facilities prior to failure were remnants of W10 Technical Preview (for example, recovery or similar tools). So in short: I had to wipe the hard drive to a successful downgrade.

  -Maurice