No sound when recording TV

For several days when I record TV in media player there is no audio. Video is fine. Audio is fine when playing DVD or my music library. I removed just recently installed update and programs.

Hi SK4254,

Because the problem occurs only on a user profile, you can try to create a new user account and check if the problem occurs:

Create a user account

http://Windows.Microsoft.com/en-us/Windows7/create-a-user-account

If the problem does not occur, then check out the following link and follow the steps to repair the corrupted user profile:

Difficulty of a corrupted user profile

http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profile

Hope this information is useful.

Jeremy K
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think.

If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

Tags: Windows

Similar Questions

  • NO sound when recording Audio - problems with Windows 7 Ultimate 64-bit

    I got in trouble for almost a year now with NO sound when recording Audio with Windows 7 Ultimate 64-bit. I just found this forum today. It's really weird how recording with windows and other sound recorder works perfectly since 1998 or so until the upgrade to win 7. Now every time I try to record it shows no found recording device or just fails to record any sound. As you'll see below I have activated What U Hear so I can use the system recording features sounds.

    I use the functions of audio recording and pdf reader because I'm legally blind. It is one of the few tools that I could use with ease on all my systems windows for many years.

    A similar question has started happening with nvidia graphics cards. AND... I was led to believe that it was a problem with Sony wanting more strong piracy measures built into windows. Am I correct to assume that this is what is happening with the sound also today or is there a solution to this frustrating problem?

    I run a dxdiag & posted that, according to me, you asked another user on the forum, the same or similar problem.

    Help solve this problem would be greatly appreciated as this has been a problem for quite a while now.

    ------------------
    Information System
    ------------------
    Time of this report: 07 25, 2012, 19:06:02
    Computer name: RAIDER
    Operating system: Windows 7 Ultimate 64 - bit (6.1, Build 7601) Service Pack 1 (7601.win7sp1_gdr.120503) - 2030
    Language: English (regional setting: English)
    Manufacturer: Gigabyte Technology Co., Ltd..
    System model: P67A-UD3-B3
    BIOS: Award BIOS v6.00PG Modular
    Processor: Intel Core i5 - 2500K CPU @ 3.30 GHz (4 CPUs), ~3.6GHz
    Memory: RAM 8192MB
    Available OS memory: 8176MB RAM
    Page file: 2861MB used, 13487 MB of available space
    Windows Dir: C:\Windows
    DirectX version: DirectX 11
    DX setup parameters: not found
    DPI setting: Using System DPI
    System DPI setting: 96 DPI (100%)
    DWM DPI Scaling: disabled
    DxDiag Version: 6.01.7601.17514 64 bit Unicode

    ------------
    DxDiag Notes
    ------------
    Display 1 tab: No problems found.
    Sound tab 1: No problems found.
    2 Audio tab: No problems found.
    Input tab: no problems found.

    -------------
    Sound Devices
    -------------
    Description: SPDIF Out (Sound Blaster X - Fi Surround 5.1 Pro)
    Default audio playback: Yes
    Default voice playback: no
    Hardware ID: USB\VID_041E & PID_30DF & REV_0100 & MI_00
    Manufacturer ID: 65535
    Product ID: 65535
    Type: WDM
    Driver name: ksaud.sys
    Driver version: 6.00.0001.0460 (English)
    Driver attributes: Final retail
    WHQL Logo would be: n/a
    Date and size: 2010-07-30 11:35:08, 1588608 bytes
    Other files:
    Driver provider: Creative Technology Ltd.
    HW Accel level: basic
    Cap flags: 0x0
    Min/Max sample rate: 0, 0
    Static/Strm HW Mix beef: 0, 0
    Static/Strm HW 3D steers: 0, 0
    HW memory: 0
    Management of the voice: No.
    Listen/Src/EAX (TM) 2.0: No, no
    Listen/Src/I3DL2 (TM): No, no
    Sensaura (TM) ZoomFX (tm): No.

    Description: Pregnant (Sound Blaster X - Fi Surround 5.1 Pro)
    Default audio playback: No.
    Default voice playback: Yes
    Hardware ID: USB\VID_041E & PID_30DF & REV_0100 & MI_00
    Manufacturer ID: 65535
    Product ID: 65535
    Type: WDM
    Driver name: ksaud.sys
    Driver version: 6.00.0001.0460 (English)
    Driver attributes: Final retail
    WHQL Logo would be: n/a
    Date and size: 2010-07-30 11:35:08, 1588608 bytes
    Other files:
    Driver provider: Creative Technology Ltd.
    HW Accel level: basic
    Cap flags: 0x0
    Min/Max sample rate: 0, 0
    Static/Strm HW Mix beef: 0, 0
    Static/Strm HW 3D steers: 0, 0
    HW memory: 0
    Management of the voice: No.
    Listen/Src/EAX (TM) 2.0: No, no
    Listen/Src/I3DL2 (TM): No, no
    Sensaura (TM) ZoomFX (tm): No.

    ---------------------
    Sound Capture devices
    ---------------------
    Description: What you Hear (Sound Blaster X - Fi Surround 5.1 Pro)
    Capture audio by default: Yes
    Default voice Capture: No.
    Driver name: ksaud.sys
    Driver version: 6.00.0001.0460 (English)
    Driver attributes: Final retail
    Date and size: 2010-07-30 11:35:08, 1588608 bytes
    Cap flags: 0x0
    Format flags: 0x0

    Description: Microphone (Webcam Pro 9000)
    Capture audio by default: No.
    Default voice Capture: No.
    Driver name: USBAUDIO.sys
    Driver version: 6.01.7601.17514 (English)
    Driver attributes: Final retail
    Date and size: 2010-11-21 13:23:47, 109696 bytes
    Cap flags: 0x0
    Format flags: 0x0

    Description: Line-In/Mic-In (Sound Blaster X - Fi Surround 5.1 Pro)
    Capture audio by default: No.
    Default voice Capture: Yes
    Driver name: ksaud.sys
    Driver version: 6.00.0001.0460 (English)
    Driver attributes: Final retail
    Date and size: 2010-07-30 11:35:08, 1588608 bytes
    Cap flags: 0x0
    Format flags: 0x0

    Hello

    In Services, verify that the Windows Audio service is running and set to automatic.

    a. Click Start and type Services and press ENTER.

    (b) ensure that these services are defined accordingly.

    c. right-click the service, and then click Properties.

    According to the DXDiag, there is no default sound capture selected.

    Description: Pregnant (Sound Blaster X - Fi Surround 5.1 Pro)
    Default audio playback: No.
    Default voice playback: Yes

    Description: What you Hear (Sound Blaster X - Fi Surround 5.1 Pro)
    Capture audio by default: Yes
    Default voice Capture: No.

    Description: Microphone (Webcam Pro 9000)
    Capture audio by default: No.
    Default voice Capture: No.

    Description: Line-In/Mic-In (Sound Blaster X - Fi Surround 5.1 Pro)

    Capture audio by default: No.

    Default voice Capture: Yes

  • Treo 800w - no sound when recording video

    When I record a video with my treo 800w, is not capture all the sounds. Am I missing something? I can't find a setting to fix this problem, if it exists. This phone record sound when shooting video? If so, anyone know how to get there?

    I had going. I feel a bit stupid, but just in case someone did the same thing as me... If you have the volume button disabled on the top of the phone does not have his back. Imagine that. I have the sound away at my job and usually leave it off. I always thought of him as a ringer switch not a complete audio switch. My bad. It turns out all my clips that capture sound. Sorry for wasting your time to Arnaud. I appreciate the help.

  • No sound when recording audio files

    Hello I have a new computer and the audio wma recorder does not work.

    Hello I have a new computer and the audio wma recorder does not work. While the recorder creates audio files, there is no sound on them. I use a Realtek audio set headphones and I am at a loss what to do I tried all options of shooting game of his trouble, which did not help. I need instructions specific to how to get the tape recorder to record.

    Hi DanielAmitai,

    ·         What operating system do you use?

    If it's Windows 7, so please note that Sound WMA MP3 recorder is not compatible with the operating system.

    http://www.MP3-WMA-recorder.com/

    Uninstall the program and try to install in compatibility mode and see if it helps.

    (a) right click on the configuration file (the file setup.exe for the software), and then select Properties.

    (b) now, click on the Compatibility tab and check the box that says run this program in compatibility mode for.

    (c) select Windows Vista (Service Pack 2). Click on apply and OK.

    (d) now right-click on the configuration file and select run as administrator and follow the normal installation procedure. Check to see if it helps.

    For more information, see:

    Make older programs in this version of Windows

    You can also check if there is an update available from the manufacturer.

  • Sounds of Windows Live Movie Maker fine in project but no sound when recording video

    So, when I put the video set the sound worked fine, but after that I had edited and saved as a video rather than a project of wmm and then opened it in Windows Media Player, there is no sound.

    I would appreciate any advice.
    Thank you!

    So, when I put the video set the sound worked fine, but after that I had edited and saved as a video rather than a project of wmm and then opened it in Windows Media Player, there is no sound.

    I would appreciate any advice.
    Thank you!

    =============================================
    More that likely there is a problem of compatibility with one or more
    of your source files. Even if the project plays when
    under the direction... the problem occurs when it is coded as a video file.

    The only solution I know is to convert your source files
    the formats that are no longer compatible with Movie Maker.

    Several formats are apparently compatible
    with different versions of Movie Maker
    but the most reliable choices are:

    Photos - bmp, jpg
    Video - wmv
    Audio - wav, wma, wmv

  • No sound when recording movies

    original title: why do I get only his and no visual effects while recording?

    During the recording of my film (which I have done in different formats, so that publish them on youtube), I get only his and no visuals? It plays back fine in Moviemaker. I have tried several projects, unedited .avi, video-cam, always the same result.

    ====================================

    More than likely your original source file is not fully
    compatible with Movie Maker. Conversion of the source
    file to the. Before you import into movie WMV format
    Maker may be the best bet.

    Thank you for your answer, I'll try their conversion and see if that helps. However the Help window and the page how-to - tells me that .avi files can be added to the filmmaker.
    http://Windows.Microsoft.com/en-us/Windows-Live/Movie-Maker-file-types-FAQ
    Thanks again.

    =====================================
    There are many, many types of. AVI files and
    most of them can be problematic in Movie Maker.

    Several formats are apparently compatible with
    Movie Maker, but the most reliable choices are:

    Photos - bmp
    Video - wmv
    Audio - wav, wma, wmv

    There are many converters to retail and freeware
    available on the net...

    The following freeware converter is an example.

    (FWIW... it's always a good idea to create a system)
    Restore point before installing software or updates)

    Freemake Free Video Converter (freeware)
    http://www.Freemake.com/free_video_converter/
    (Windows XP / Vista / 7)
    (* Read * all * the installation screens... it)
    may be a few items you want to unmark *)

  • No sound while recording with Windows Vista

    Hello!

    Thanks in advance for the help!

    I have a new 430 of XPS from Dell running Windows Vista Home Premium 64-bit.

    I try to save and the external audio source (old audio cassettes) using audio recordings of Vista. I am inputing the audio using the socket "line in" on the back of the computer.  The Visual meter shows a signal is present, and I can save, save and playback of the audio file after it is saved.  The problem is that I can't hear any sound when recording from an external audio source.  I check in 'Sounds' in the Panel, and in 'line' monitor shows it receives a signal (and the level is turned up), but nothing is heard in real-time.  No speakers are silent. All the other sounds of the computer, MP3 and CD is heard without difficulty.  When I do a check for speaker under 'Sounds', the speakers work fine.  But I hear no audio registration until after I record the signal.

    The computer is only 2 months old, and I've never been able to hear any audio registration in real time.  This isn't something that just stopped working.

    I also use Total Recorder 7.1 and I have the same problem.  Total Recorder sees the external audio input signal and saves it.  But I do not what I did until I have read the saved file.  With Windows XP I always heard an external audio input as soon as I plugged the audio source, but so far it does not the same under Vista.

    Device Manager tells me that my sound card and driver are operating normally.

    Any ideas anyone?  Is there a change in Vista compared to XP?  Have they blocked the monitoring in real time because of some problems of conflicts or comments?  I'm just guessing.

    Thank you!!!

    Dan

    http://en.community.Dell.com/forums/t/19250187.aspx?c=us&l=en&CS=04&s=BSD

    Solution seems to be to disable the integrated sound card and buy a PCI sound card. Good news is that they are cheap.

    Just to be sure, it is the last driver I could find at Dell

    http://support.us.Dell.com/support/downloads/download.aspx?c=us&CS=04&l=en&s=BSD&ReleaseID=R190321&formatcnt=1&LIBID=0&FILEID=261430

    I suspect the integrated sound card is not full duplex or the available driver is unable to drive. The first is my best guess.

    So the bottom line is that you need a PCI Full Duplex sound card that works with 64-bit windows. The highest and digital sample rate 24 - bit is better, but I don't know it wouldn't be difficult to exceed the specifications on board. Rob - support element, Cascade Bicycle Club P.O. Box 15165, Seattle, WA. 98115-0165 206-522-3222-24 hr hotline 206-522-BIKE http://www.cascade.org

  • Can't hear audio when recording.

    I checked the preferences and I think that everything seems ok, but I can't get a peep out of him. Connection is headphone for pc,

    I also tried pre amp for pc but still nothing.

    As a test, I tried various tests and other freeware audio editing software and I can hear the sound when recording. I just can't hear when using Audition CS5.5

    Uses Windows 7 and hdmi sound through my graphics card. I think there must be a setting somewhere but I don't can not find. Thanks in advance for any help.

    Well, I had a play with the Realtek integrated sound card on my laptop - not my normal way of record - and has been able to monitor the entry as it was recorded.

    I used multitrack view (as one normally do) and the only thing I had to do was click on the 'I' symbol (next to the "M" (mute) (solo) "S" and "R" (arm for record) buttons.)  The 'I' is for the input of the monitor.

    However and this is a big however, on my laptop as soon as I specify the HDMI output, it disables the power supply of my helmet.  I can't try it without re - arrange my house, but I am betting that if I plugged the HDMI output on my laptop to my TV, the sound would be.  But it is certainly not on the headphone output of my computer.  It reappears on the headphones as soon as I select 'speakers '.  FYI, I also have to mess around with matching sampling frequencies since the HDMI is locked to 48 kHz and no digital output is set to 44.1.

    I hope this helps.

    Bob

  • Microsoft Lifecam 5000. Whenever I'm recording video with her, during playback, I hear clicking on and a beep sound when the camera focuses

    Hello, I have problems with my Microsoft Lifecam 5000. Whenever I'm recording video with her, during playback, I hear clicking on and a beep sound when the camera is focusing. If I put it to my ear, the sound is low but I can still here it when it focuses.

    Hello

    Thanks for posting in the Microsoft Community Forum.

    I understand from your description, that you get beep when the camera is focusing.

    To better understand the question, please answer the following questions:

    1. have you made changes on the computer before this problem?
    2. is it works much earlier?

    Come back with more information to help you better.

    I suggest you to download and install the latest drivers for Microsoft Lifecam 5000 from the link provided:

    http://www.Microsoft.com/hardware/en-us/d/LifeCam-VX-5000

    You can even try recording by reducing the volume on the computer to the minimum level (mute) just to check if beep occurs.

    http://Windows.Microsoft.com/en-us/Windows7/adjust-the-sound-level-on-your-computer

    For more information, see the link below:

    http://www.Microsoft.com/hardware/en-us/help/support/troubleshooting/webcam/LifeCam-Setup

    Hope the above information is helpful. If you have any question back to us, we are happy to help you.

    Thank you.

  • How to disable direct sound when you use a plugin for guitar?

    I use the Waves GTR plugin for recording guitar in Logic Pro X, but because it puts a lot of pressure on the CPU, I tried he governs through a "bus" instead of having the plugin separately on every guitar track. The difference is that when I use the bus option, I can't seem to get rid of dry direct sound which is obviously very embarrassing. The only way for me to get rid of the direct sound is to use the RTM plugin on every guitar track that quickly causes the overload program when using several of these titles.

    Anyone know how to get rid of the direct sound when you use the alternative of bus for the guitar tracks?

    just at the exit of the guitar channel strip no output. This way you won't hear at the follow (because the dry track will not be transmitted to any output)

  • Microphone does not work well when recording video to work

    For the last few months, my phone has this kind of problem whenever I wanted to record a video. The audio in the recorded video may not be heard clearly, even with the highest volume. There sounds caring as wind noise even though I'm far from any source of wind such as fan, or when recording. At first I thought it was problems with the listener; probably I had disconnected the wrong way. But after trying a few times, the result is always the same. When I tried to record audio using voice memos, the audio is properly can be heard. This problem only occurs when you record a video. Please help me.

    Hi afiqahroshidi,

    Please visit Apple support communities.

    It seems that your iPhone does not record clear audio as well as your videos. It seems that you have identified that the background microphone (used to record voice memos) works, according to get help with microphones on iPhone, iPad and iPod touch.

    Then, try the following steps, coming from the link above.

    If audio video recordings of soft sounds, or Siri can't hear you, ensure that the microphone near the iSight camera - corner of your iPhone on top, bottom, the receiver is not blocked or covered.

    If the microphone and the receiver are not blocked:

    Get help

    If you still have questions after you test the microphone on your device, try the following steps:

    1. Unplug any accessory plugged into the headphone jack.
    2. Avoid blocking the mic microphone and iSight with your fingers while holding the device or video recording.
    3. Remove the protection of screen, movies or cases that cover the microphone, microphone iSight or iPhone receiver.
    4. Clear all debris from the microphones or receiver iPhone. Refer to the manual of your device on the locations of the microphone.
    5. Restart your device.
    6. Make sure you have the latest version of iOS.

    If you have tried these steps and people still can't hear you on the phone or FaceTime calls or Siri does not hear your requests, contact Apple technical support.

    Best regards.

  • How can I activate the sound 5.1 surround sound when watching Netflix?

    How can I activate the sound 5.1 surround sound when watching Netflix?  I look at all my other content (DVDs, TV recorded movies, etc.) in Windows Media Center in Dolby Digital 5.1 surround sound.  I contacted Netflix and they said that Microsoft does not support:
    shiregator How can I activate the 5.1 surround sound media Center windows? blog.Netflix.com

    Netflixhelps You'll want to talk to Microsoft to see if it is supported.
    When will support surround sound on Netflix streaming?
    Thank you.

    Hello Shiregator

    As far as I know, the only Netflix 5.1 Dolby device supported for Microsoft's Xbox 360. On a side note, not all movies streaming from Netflix support 5.1. Make a search for Netflix movies in 5.1 and a list making. Thanks again.
  • Zero latency when recording possible? CS6

    I can't get the latency time at an acceptable level in hearing CS6.  When recording I can hear an audible delay when I pull my string guitar for when I hear it playing on my computer speakers.  The latency in Audidion was initially set to 200ms and I've adjusted all the way to 30ms (which is as low as possible as seems) but I still get a delay that makes it too difficult to play with a backing track.  Is it possible to reduce this latency time to zero?

    "Audio equipment" current settings are set at: MS, 30ms, 44100 Hz.

    I'm running my guitar through an M-Audio Fast Track Pro USB interface.

    Release of Windows 7 on board sound via an optical cable to a 5.1 receiver.

    Audition CS6

    A number of things...

    First, visit the M-Audio site and download ASIO drivers appropriate for your Fast Track Pro.  ASIO offers much less latency than MS and, probably more important, in my view, it allows the hearing latency compensation work properly.

    Second, the use of your sound card onboard which is designed for the playback of videos of pit (where the 5.1) rather than low latency recording.  I guess that's why you're stuck with Ms too.  Make your exit through the Fast Track pro and read to the accelerated procedure manual monitoring section.  Your interface allows 'direct material' monitoring for you to listen to your guitar on the entry, and not after a round trip via a to D, your computer conversion, then a D to a conversion.

    I hope these steps help!

  • There is no sound when I try to play the songs of desktop PCs.

    There is no sound when I try to play the songs in my library or radio.  The speakers are very well because I can play from iTunes radio on the internet and local music. I've deleted and reinstalled iTunes, restarted my computer and I know that the sound is turned on. Curiously, it seems that the song moving forward and does not in fact (the blue line streaming lights up blue when I select a song or an advance to the next song.

    See the replies in this thread:

    iTunes no sound

  • No sound when don't receive the text for a single contact.

    My iPhone6 does not play a sound for one of my contacts when a text is received.  Others make it sound when the text is received.  Any ideas why this happens?

    HI there, milford dennisfromnew!

    Thank you for using communities Support from Apple. After reviewing your post, I see that when you receive an SMS from a particular person, you don't get notification sounds. I use Messages every day to keep in touch with friends and family, so I know how important it is to make sure you get all your notifications and would be happy to help you!

    It is possible that you cut your conversation with this person. The section "Mute conversations" in the following article will give you more details on where to control and how to enable and disable.

    Use Messages with your iPhone, iPad or iPod touch

    The information is:

    Silent conversations

    To no longer receive message notifications, you can cut off conversations. In the Messages, go to the conversation you want to turn off notifications for. Then click details and turn on do not disturb. When do not disturb is activated,will appear next to the conversation. This interruption of the notifications only for this conversation to message, not your device. Always you receive all messages and see notifications for them on your lock screen.

    You can also cut all your conversations by turning on do not disturb in settings. Go to settings > do not disturb and tap manual or programmed. This will stop all notifications on your device.

    Happy texting!

Maybe you are looking for

  • I can't put anything on my backup disk! (even if it is still possible)

    I tried to save my photos, but I don't want to use time machine, so I can access on Windows computers. Whenever I try to put something in the drive, a sign of block rises and don't let me down in the drive. I am usually able to put it in the drive. I

  • Equium A60: Does not burn the DVD?

    Hi all Ive had my phone for almost a year now and for some reason any dvd drive does not burn the DVD, it burns cd perfectly but when it comes to bruning DVD it says that nothing is in the drive... Ive tried Philips DVD + RW and DVD + R Sony but stil

  • How to read a signal of temperature continuous of a pyrometer via RS - 232

    I am currently reading and chart of a pyrometer Pyrofiber Lab that arrives via an RS - 232, a continuous signal cable. As much as I know there is no device driver for this instrument (or any other pyrometers). If I the pyrometer measures alone I can

  • C100 MKII Auto Iris

    I read the following comment on the C100 and would like to learn more about the feature of Auto Iris on the MK2 C100 I intend to invest. Please see the comment too in your response. Thank you «I am proud owner (usually Mark II) 5 L series lenses: EF

  • How to get rid of text to improve

    All of a sudden, I have a program called ad text nuisance improve I think that Google Chrome has put it on my computer.  On any text, there are a few words that are highlighted, and when you click on it, an ad appears.  I tried to withdraw their inst