CS6 InDesign overlay Panel options are not available

Similar Questions

• BlackBerry Smartphones media options are not available

  I've upgraded to version 6 of the desktop software and now I can't see all of the photos I have in my blackberry. When I click on the images, I get the following:

  

  I don't get the legs that are supposed to show by saying "device images" or "computer". I didn't have this problem with version 5 of the software. I have 'mass storage' put on the market. The photos are not in the internal memory a media card. I tried to access the images through "my computer", but the reader that appears for blackberry says 'insert disk '. I read a Ko that describes this symptom but it only apply if the device showed 0001 or 8001 in Device Manager. Show you mine 8004. Can anyone help?

  Thanks to Thomas that responded to the questionnaire. Fortunately, I managed to solve this problem last night. Before your post, I also tried dm6 uninstall & reinstall except to take out the battery & disable the firewall. That did not work. I tried to install dm5 since that worked before and that no longer works.  What worked was a fix by blackberry. Although it requires you to ensure that your blackberry says 0001 or 8001 in windows 'Device Manager' mine says 8004. I tried anyway since I didn't have much to lose at this stage and it worked.

  I would switch to dm6, once again, but I don't want to take the risk now that I have it working. Maybe in the future. The link at the bottom of my post contains the fix for this problem. As I said your blackberry does not necessarily mean 0001 or 8001. Give it a try the next time you have this problem. Although he said that you need version 4 and 5 DM I guess that it will work with dm6.

  http://www.BlackBerry.com/BTSC/search.do?cmd=displayKC&docType=kc&externalId=KB19717

• Remote Desktop connection options are not available

  Original title - Remote Desktop connection

  Im trying to use the remote desktop connection, but when I go to test to enable it, it won't give me the three options at the base that are:

  1 do not allow connections to this computer
  2 allow the connection of computers running any version of remote desktop
  3 allow that connect the computers running remote...
  Can someone help me please?

  Hi JuanLeiva

   

  1. which edition of windows vista is installed on the computer?
  2. where exactly you check for settings?

  3. have you successfully activated the remote desktop connection to use?

   

  I suggest to refer to the links below and try allowing the remote desktop connection, as a result, then check if the problem is resolved.

  http://Windows.Microsoft.com/en-us/Windows-Vista/Remote-Desktop-connection-frequently-asked-questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/connect-to-another-computer-using-Remote-Desktop-connection

   

  I hope this helps.

• Paragraph options are not available

  Since I switched to the creative cloud I had the problem where I can't see the exact settings for my paragraph. I can adjust spacing by using the upper and down arrows, but cannot see what they are attached to, or click a definition of space in the key box. As you can see below, all options along the left column of the box are displayed, but nothing on the right.

  

  See on the first page in this forum:

  Troubleshooting 101: Replace or 'trash' to your InDesign preferences

• Edit options are not available for PDF sent by email from the United Kingdom to the United States?

  I created documents in Word. On the printer option converted to format PDF and files can offer all change options (for me) but after send the PDF saved (from the United Kingdom to the United States and the United Kingdom to South Africa) or recipients could use editing options. It was confirmed that she has drive XI. Can someone explain why or how to fix?

  Bernd, I've created a public link, which is the shared - files Acrobat.com tell me if you can examine the file please?

• Spider sometimes works ok, sometimes in the rendering mode.__sleep and hibernation software are not available when the software rendering mode is running

  I have an ASUS K501N laptop.running 7 Home premium.

  Sometimes when I turn on it the office/display is not so strong, if I click on Spider I get a flag your who says run the game in software rendering mode hardware acceleration is disabled or not supported by your video card driver happens whensleep and Hibernate options are not available.

  Other times that everything works correctly.

  Anyone know why and how to remedy

  Hi leflaneur,

  1 when was the last time it was working fine?

  2. did you of recent changes on the computer?

  3. when there is no sleep and hibernate options available?

  4. are you able to play other games on the computer?

  Method 1

  I suggest that you enable the acceleration of the display on the computer and check if the game works.

  (a) open settings display by clicking the Start button, clicking Control Panel, appearance and personalization, customization, and then clicking display settings.

  (b) click on display settings, and then click Advanced settings.

  (c) click the Troubleshooting tab, and then click change settings. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  (d) move Hardware Acceleration complete.

  Method 2

  If the previous step fails, then you will need to download and install the drivers for the graphics cards updates by visiting the card manufacturer's Web site and check if it helps.

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Your power plan information are not available. Access is denied. Not able to change the power plan options.

  Original title: why I can't change the options for when I close the lid of my portable computer?

  When I go to power options and change what happens when I close the lid, I click on change settings that are currently unavailable and it says "your power plan information are not available. Access is denied"and I can't change my options. I tried these two options:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-performance/your-power-plan-information-isn ' t-available-cant/b39cfd71-2455-4400-83de-018ce7a18eef

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-performance/error-your-power-plan-information-is-not-available/c32eba7b-3428-46FE-AFC5-0c3369d1ca8e

  but none seemed to work. Could someone please help.

  Dan

  If you're on a Samsung or Sony [he possibly also others], then there is a 'useful' utility, installed by the PC manufacturer that is inhibiting your ability to set power plans.  Quick start to type in the search box of the start menu & if such a utility exists then go ahead & turn it off - there is no unwanted side effects.  It doesn't help that you can't do yourself.

  For the other PC, navigate to the folder of the machine in all programs and search for any similar name - quick start, fast, mess-up-your-power sleep - options.exe, that sort of thing.

  Because the symptoms for the first time by people with this afliction is always - can't change what happens when I change the cover - I think you'll be right as rain when you have disabled the quick start.

  Let me know how you go,

  {I would say, 'Good luck', but you won't need luck.}

• the fitting of the image in the field including AutoFit options are not displayed on my options panel of the selections Tools toolbar

  The fitting of the image in the field including AutoFit options are not displayed on my options panel to toolbar for the selection tools. How can I view?

  You're out of space. Some toolbar has been resized/re-spaced in the last update. Click on the menu button (on the far-right in your screenshot) and select Customize... Make sure that the mounting frame (object) is selected. If this is the case, you should disable something else to make room for this group of button.

  Furthermore, I see that your application window is not maximized. What happens if you expand to the maximum it?

• OfficeJet Pro 8210: network capabilities are not available.

  Hi, I have been setting up the printer above but I need to put in place on a network. I don't have the network option as it says "network capabilities are not available. When I print the network configuration page, it says network capacities have been disabled when the device has been implemented. I did not disable anything. The user manual says to use the display and move to restore the configuration - tools. I don't have an option to restore the screen of the printer. Please can you help me to reset the printer to factory settings. I'm a COMPUTER tech so don't know what I'm doing.

  Kind regards

  CMS

  Hi @CMS61,

  Welcome to the HP Forums! It is a wonderful location to converse with the community, get help and find resolutions. I understand that you don't have the network option on your printer as it says "network capabilities are not available. I'll be happy to help you in this regard. Great job, looking for user manual for the printer. It's always a privilege to work with a COMPUTER technician like you.

  However, to answer your question about resetting the default printer, it is possible by accessing the menu before display.

  • Turn your printer off.
  • Wait 10 seconds before you turn it back on again.
  • Just as the printer is turned on, press the back (arrow) button on the front panel of the printer "4 times."
  • If you do it right, the support menu should appear.

  Menu Access resets

  There are several options in the Help menu. To access the menu resets all what you need to do is navigate to the right until you find the menu "resets". Under Reset menu, you will find the three different types of resets, reset partial, semi full reset and reset complete. Select the appropriate type of reset you need, and your printer should reset itself.

  The partial reset

  Delivery to zero partial just updates the printer and erases the memory of the printer useless. This type of reset fixes minor printing problems like slow printing cartridge errors, etc...

  The semi-complete reset

  The semi Full Reset is the most useful type of reset. However, this clears all the custom of your printer settings and returns it to its default factory settings. Use this reset if the partial reset does not solve the problem.

  Please do not perform a full reset.

  It will be useful to visit these links.

  Link to perform a reset:

  http://support.HP.com/emea_middle_east-en/product/HP-OfficeJet-Pro-8210-Printer-series/7902063/model/7902064/document/c05225613/

  Link to troubleshooting of the printer:

  http://support.HP.com/za-en/product/HP-OfficeJet-Pro-8210-Printer-series/7902063/troubleshooting

  Thanks for reaching out. Please let me know if this helps in Mark this message as 'Accept as Solution'. If you need help, let me know and I will gladly make all that I can to help. If you want to say 'Thank you' for my efforts help, click on the "Thumbs Up" button to give me a Kudos.

• I signed on XP Pro SP3 as an administrator but you cannot change the timing of Windows Update to 03:00. All options are not enabled. How can I change the time, updates are made? __

  I signed on XP Pro SP3 as an administrator but you cannot change the timing of Windows Update to 03:00.  All options are not enabled.  How can I change the time that updates are made?

  Hi imoffshore,

   

  Welcome to Microsoft Answers Forums.

  We would like to get some more information from you to help solve your problem. You better, please answer the following questions.

  ·         When was the last time it worked?

  ·         Remember to make changes to the computer recently?

  ·         You have security software installed on the computer?

  ·         You get the error message?

  When you open the tab automatic updates in the control panel or My Computer property sheet, all options of configuration of the automatic updates may be grayed out. This happens due to one of the following reasons:

  1. You are not logged as administrator (or equivalent)
  2. Strategy of automatic updates is enabled
  3. Automatic updates (and Windows Update) access is blocked by group policy

  The options available for automatic updates.

  You must make some changes in the windows registry.

  Important: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows

  http://support.Microsoft.com/kb/322756

  • Click Start, run and type REGEDIT to . EXE
  • Go to this location:

  HKEY_LOCAL_MACHINE-SOFTWARE-policies-Microsoft-Windows------WindowsUpdate------AU

  • In the right pane, delete the two values AUOptions and NoAutoUpdate
  • Go to this location:

  HKEY_CURRENT_USER-SOFTWARE-Microsoft-Windows-CurrentVersion------policies------WindowsUpdate

  • In the right pane, delete the DisableWindowsUpdateAccess value

  Using the Group Policy Editor - for Windows XP Professional

  • Click Start, run and type gpedit.msc
  • Navigate to the following location:

  => Configuration of the computer
  ==> Administrative templates
  ===> Windows components
  ===> Windows Update

  • In the right pane, double-click Configure automatic updates and set it to not configured
  • Next, go to this location:

  => User configuration
  ==> Administrative templates
  ===> Windows components
  ===> Windows Update

  • In the right pane, set to remove access to all Windows Update features on not configured

  Change how Windows installs or notifies you of updates

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-how-Windows-installs-or-notifies-you-about-updates

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Compatible options is not available on the Web site for Portege M700

  Hello

  For the last 3 days no compatible option appear on the Web site for the M700. I would like to buy one, but need to order etc. spare battery.

  Tip: I would like to spend the money.

  If someone Toshiba could explain why the compatible options are not displayed, I would be very grateful.

  Thank you
  Mark

  Hello

  Unfortunately I'm not toshiba so I can't give you an answer "TOSHIBA": D ".

  But after surfing the website of toshiba Europe, I couldn t find anything wrong. All options are available and I Don t know where is the problem. Maybe there was just a few changes to the site within the last 3 days...

  Welcome them

• Some features of Windows are not available.

  I have an IdeaPad p580 and I noticed that a few basic functionality of windows are not available. I use Windows 7 Home premium SP1 and everything else is usually straight out of the box. I guess these are the basic features of windows because I learn about them in an intro to the class of Windows operating system.

  When I try to use secpol.msc in the start menu, windows cannot find it, and also when I try to encrypt a file or a file this option is grayed out. I think Veriface is the encrypt function creep, or another software that is preinstalled is to play with things.

  No idea as to what could be the cause? Is my book misleading me, I may get to such a different way?

  Hi Kholt,

  Some features are not available in Windows 7 Home premium...

  http://www.SevenForums.com/network-sharing/202099-secpol-MSC-network-security-workaround.html

  http://Windows.Microsoft.com/en-us/Windows7/encrypt-or-decrypt-a-folder-or-file

  http://en.Wikipedia.org/wiki/BitLocker_Drive_Encryption

  Zehn

• Processor and ram are not available

  When I click on system and security of the Control Panel, it shows that my CPU and ram are not available.

  When I bought it I could see of it information, but now it shows that they are not available.

  Hello Syed,

  Thanks for posting your question on the Microsoft community.

  Thank you for details on the issue.

  This problem may occur because of damaged or missing Windows files. This can also happen if associated service is not running.

  I suggest you to check if the "Windows Management Instrumentation" service is running as set as Automatic.

  Please follow these steps:

  a. press Windows + R key, type services.msc in the immediate window and press ENTER.
  b. right click on "Windows Management Instrumentation" and click Properties.
  c. make sure that the service status is running and Startup type is automatic.
  d. If not, select the Startup type to Automatic and click on 'Start'.
  e. click apply and ok.

  If she did not help, run checker (SFC) of file system and see if it helps.
  Refer to this article:
  Use the System File Checker tool to repair missing or corrupted system files
  https://support.Microsoft.com/en-us/KB/929833

  System File Checker is a Windows utility that allows users to find corruptions in Windows system files and restore the damaged files.

  Note: It can ask the difficulty Windows installation DVD and allowing SFC to do more than minor repairs. Could some of the files saved on your computer are deleted when fixing corrupted files.

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• Onion skin color option is not available

  An option is not available in the preferences

  Mine:

  

  Tutorial on the Adobe Web site:

  

  This is a new feature to animate CC 2015.2, which was published in June of this year.

  If you are using an older version of Animate, you will not have this option.

• "protect tones" option is not available for images high resolution (1200 dpi)?

  Hi community - I'm publishing some drawings I scanned at 1200 dpi and need to burn/dodge areas of images. However, the protect tones option is not available (can't click on the checkbox) and only works if I decrease the resolution. Help?

  What picture Mode do you use and what are the dimensions in pixels of your drawing?

  I noticed no check in/8 gray levels, it is ok with RGB/8

  1200 dpi/PPP is a printing technique and tell me if the amount of pixels are above what the dodge / / burning tools can take.