CS6 only sees 4 MB of ram of 16 MB in the performance tab setting

Similar Questions

• Manager tasks shows only 4 graphics on the performance tab when it should display 8 for 3770 K & Win7 x 64

  When I open the performance tab of Task Manager I see that 4 graphs (showing the CPU core activity) instead of the 8 that I would see with a 4 core with hyper-threading processor. I have unplugged and plugged into the CPU 8 power connector pins several times and once I could see 8 graphics for about an hour until what he returned to only 4. Since then, I don't me 8 graphics no matter what I do. I replaced the MB, CPU, memory and power separately, but he never makes no difference.

  My father has a Dell with a 3770 and his task as managing only shows 4 graphics.

  I have an Asus P8Z77 - V Pro MB, i7 - 3770K, 16 GB Corsair Memory (2x8GB) CL9, PSU Corsair HX850 gold and Win 7Pro x 64. My father has a Dell with the same processor, but different everything (he has Win 7 HP x 64).

  4 graphics that appear are for 2 cores with hyperthreading. I can tell because Aida64 says only 2 hearts are running. I also only 4 graphics with the ASUS AI Suite 2 program.

  Windows is set to mode performance and no power saving features are enabled in Windows or the UEFI.

  Can someone tell me what is happening? How can I get 8 graphics is displayed all the time?

  Thank you

  Bruce

  Hi Bruce,

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums.

  http://social.technet.Microsoft.com/forums/en-us/w7itprohardware/threads

  Hope this information helps.

• I am running Windows 7 Ultimate 64-bit. Currently have 4 GB of RAM. I would switch to 16 GB of RAM. This will increase the performance of my computer?

  My husband tells me that Windows 7 supports only 4 GB of RAM maximum, but I don't think this is correct.
  Can someone help me please you without resorting to computer jargon.  A response in English would be more useful :)

  Hello

  Thanks for the reply.

  You can read these articles and check if that helps.

  Diagnosing memory problems on your computer: http://windows.microsoft.com/en-US/windows7/Diagnosing-memory-problems-on-your-computer

  Limits of memory for Windows versions: http://msdn.microsoft.com/en-us/library/windows/desktop/aa366778(v=vs.85).aspx #physical_memory_limits_windows_7

  Usable memory may be less than the memory installed on Windows 7 computers: http://support.microsoft.com/kb/978610

  Let us know if you need assistance with any windows problem. We will be happy to help you.

• VCenter Performance tab: Preview discovers metric of missing memory. Shows only the ball.

  Excuse my post if it is a duplicate, but I can't find anything about that in one of the research I've done.

  I have several poles/vCenter environment.  All of my ESX servers are the ESXi 4.1, and only one of my vCenter servers has been updated to vCenter 5.1.

  When I connect via vCenter client to my hosts to vCenter 4.x and I discover the performance tab of one of my virtual machines, on the overview, the memory map shows various counters, including Active, Shared, target ball, ball and swaps.

  However, when I connect via vCenter client to my host to vCenter 5.1 and try to do the same thing, the memory card has only one meter, ball.  All other settings are missing.  I can go to advanced and out manually, but I'm curious as to why they do not show on the overview tab.

  Is this normal or is at - it something wrong in my environment?

  TIA,

  Matthew

  I had the same 'problem' If you want to have this kind of information that you need to go to the administration of the menu on your vsphere and within the parameters of the vcenter server, after that you will need to go to the static option and pass the static levels to 2. This change generally increases a lot the use of the database, so be careful to change as little as possible. In my case, I adjusted just the time interval of 5-minute statistics level 2 since I just need such metrics for a day.

  Kind regards

  Wiliam

• PS CC allows only 3.2 GB of RAM?

  Why Ps CC tells me in preferences that I can access only 3.2 GB of RAM, Ps CS6 allows me access 10-11 GB (my system has 12 GB of RAM)

  Post edited by: CRMiele

  Please ensure that you do not initiate application Photoshop CC, which is actually the native 32-bit application.

  In order to have an optimal use of the RAM on computer 64-bit, you must launch the application Photoshop CC(64bit) .

  

• Why the system writes: installed 4 GB of ram, but usable only 3.6 GB of ram?

  Why the system writes: installed 4 GB of ram, but usable only 3.6 GB of ram?

  On Wednesday, March 6, 2013 15:02:32 + 0000, DanielOrtner wrote:

  Why the system writes: installed 4 GB of ram, but usable only 3.6 GB of ram?

  3.6 GB is a very good number - much higher than most people's.

  All versions of Windows 32-bit client (not just XP/Vista/7/8) have a
  Address 4 GB of space (64-bit versions can use much more). It's the
  theoretical upper limit beyond which you cannot go.

  But you can't use the whole address space. Even if you have a
  Address space of 4 GB, you can only use around 3. 1 GB of RAM (and as I
  said, you do much better than that). This is because some of
  This space is used by the hardware and is not available for the operation
  system and applications. The amount you can
  use varies, depending on what hardware you have installed, but can
  range from as little as 2 GB to 3.5 GB. It's usually around
  3. 1 GB.

  Note that the hardware is using the space, not the real address
  The RAM itself. If you have a larger amount of RAM, the rest of the RAM
  goes unused because there is no address to map space to.

• Windows XP - LG DVD - RAM drive does not read the DVD. It's playback CD only... I ran the fix microsoft program... but it did not help at all.

  Windows XP - LG DVD - RAM drive does not read the DVD. It's playback CD only... I ran the fix microsoft program... but it did not help at all.

  CD/DVD players use different lasers to read CD DVD vs.  Eventually, your DVD laser has grilled.  It might be time to replace your CD/DVD drive.

  HTH,

  JW

• Why windows xp 32-bit supports only 3.25 GB of ram?

  Why windows xp 32-bit supports only 3.25 GB of ram?

  Tehre is no solution for this problem, and I don't want to install xp 64-bit,

  coz its not user frndly, thank you

  My apologies, I must have misread the topics when I did my first answer. For some reason, I got it in my head, whether you use Windows 7 32 bit.

  I stand by my original comments well that although I appreciated now that you are referring to Windows XP.

  If you want to go to 64-bit Windows XP I'm not sure if this is even possible now. Unless you buy a commercial version second hand. If you can, make sure that it comes with an installation CD.

  To check the compatibility 64 bit XP the following may be useful...

  http://support.Microsoft.com/kb/896456

  http://support.Microsoft.com/ph/8599

  It will be even more important to check the hardware/software compatibility via the websites of the manufacturers.

  Tricky

• I would like to install Windows XP on my computer and get rid of the Vista operating system. Can I do this? I only have 512 MB of Ram and 32-bit processor.

  Windows XP instead of Vista.

  I would like to install Windows XP on my computer and get rid of the Vista operating system.  Can I do this?  I only have 512 MB of Ram and 32-bit processor.

  Hello

  There are a few things that you would have to do to install XP instead of Vista:

  1. contact the manufacturer of your computer and see if the XP drivers are available for your computer model to make sure that XP has worked properly in this regard.

  2. If the XP Drivers are available, buy a XP disk operating system / license. Try local computer repair shops because Microsoft sells more than XP and online sale buy you pirated copies can cause. Be very careful.

  3 XP runs with 512 MB of RAM, although a little slow by today's standards.

  4. do a clean install of XP. Make sure that all your data is backed up as the hard will be cleaned of everything during the Installation of XP.

  http://pcsupport.about.com/od/OperatingSystems/SS/instxpclean1.htm

  Here is some information that you would like to learn more about improving the performance of Vista using ReadyBoost, you have only the minimum amount of RAM to run Vista:

  http://www.bleepingcomputer.com/tutorials/using-Windows-ReadyBoost-to-increase-performance/

  See you soon.

• Why adobe photoshop cs5 uses only 3 GB of my ram 12 GB? pls help

  Hey guys can help you with this... I'm a bit confuse with my adobe photoshop cs5 in my system... I have an i7 970 processor and channel selection 3 x 4 (12 GB) RAM... but when I look at the EDIT > PREFERENCES > PERFORMANCE in my adbobe cs5 it shows only 3 GB of available ram when I have 12 GB installed in my system... I want to adjust use 8 GB of my 12 GB of ram... How can I solve this? do you need advise please...

  Photoshop CS5 installs as a version and a 32-bit 64-bit on x 64 OS.

  Run the 64-bit version to access all of your RAM.

  Run the 32-bit version if you need compatibility with older 32-bit snap-ins.

  Look in the Start Menu for links at a time.  The 64-bit version is tagged with (64 bit) after his name.

  -Christmas

• Export of media in Premiere Pro CS6 ONLY produces an Audio file in Media Encoder

  First of all, all the System Info:

  Windows 7 Home Premium Service Pack 1

  Intel HD Graphics 3000 graphics card

  I use the first Pro CS6 Version 6.0.5 (001 (MC: 264587)) «Mighty Kilt»

  Version 6.0.3.1 (64-bit) Adobe Media Encoder cs6

  Other Adobe applications: AIR, creative cloud, Download Assistant, Encore CS6 Library, 12 ActiveX of Flash Player, Flash Player Plugin from 12, Manager help, Premiere Pro CS6, Premiere Pro CS6 functional Content, reader XI

  I ran on Premiere Pro and Media Encoder updates and everything is up-to-date

  I produce a two disc double layer DVD for 100 families of my sons of fanfare.

  I have half an hour "masterpiece" of interviews, segments of performance, rehearsal sequences, credits, etc. that I edited complete set with sound, etc.

  I also have various other video segments of the season, a high quality (1920 x 1080) and a decline in quality.

  Rather than import in yet and have yet to transcode all the same quality, I wanted to make sure the piece of half an hour and some other segments were transcoded in highest possible quality and given the large size of the files that I could and then transcode other segments at lower levels of quality as it is necessary so all the space on the disks.

  The company I use to duplicate/replicate the 100 DVDs of my DVD Master advised me to encode them FIRST in Premiere Pro as you wish and THEN import these files into yet.

  I used Adobe Media encode a lot to export the individual segments in the files, I could upload it to Youtube and have had no problems for several months.

  But now, two things happen:

  (1) SOUL automatically designates the file 'exit' with an extension .aac (see table)

  (2) when I do a file "import under" soul encoded in still won't load an audio file (obviously)

  Huh?

  Here are the settings I use in my export media dialog in Premiere Pro CS6:

  Format: MPEG2-DVD

  Screening: NTSC widescreen high quality

  Out of name (and the file type): _ name with like kind of video Files (*.mpg) «»

  Boxes to "Export video" so much "Export Audio" is checked (see attached screen print)

  The filters tab: on the left as is, don't do anything here

  Multiplexer tab:

  • Click on the button "DVD" (vs. the "None" button)
  • Bitrate type: left as Variable that matches what is selected by default

  Video tab:

  • Codec: Reads MainConcept MPEG video
  • Quality: increase it up to 5
  • TV standard: NTSC
  • Frame rate: 29.97
  • Field order: no (progressive)
  • Pixel Aspect ratio: screen 16:9 wide
  • Go to maximum depth box checked
  • Encoding Bitrate: I choose CBR for my high quality segments and VBR 2 pass for my segments of lower quality
  • Bitrate: kick up to max to high quality segments, adjust as required to obtain the size of the file that I want for my lower segments of quality

  Audio tab:

  • Audio format: Dolby Digital
  • Codec: Dolby Digital
  • Bitrate: 320 at least, sometimes higher for segments, I want to be the highest quality

  I check the box of "quality to make Maximum usage.

  I chose 'Tail' for everything and then let it run all night

  And Yes, the original media has TWO a video track and audio track that works (see screenshot)

  So... What am I doing wrong, useful experts?

  A - ha! MPEG2 export formats missing in the SOUL is the key to the riddle. You have a license problem, possibly the one discussed here: http://forums.adobe.com/message/4401451.

  I'm not familiar with this issue and has not taken the time to read the pages that links Todd to-instead, I wanted to get the link for you as soon as POSSIBLE. If you have a problem directly solving the problem, I see two immediate options: 1) encode "in-process" by Premiere Pro by clicking 'Export' in the dialog box export settings (as opposed to the queue, which of course sends the job of the SOUL), or 2) to install the trial version of CC (aka 7.x).

• Kernel Panic + no = RAM Startups don't have the culprit?

  Hello world

  I'm just putting this here so I can get advice from the community on the cause of a recent kernel panic.

  About two days ago using my mac until I'm the standard "kernel panic" message.

  After that the machine would not start to OS X or Bootcamp.

  Give Apple Support a call in my country, to see if they could help, they suggested predictibly holding the mac of my service provider local mac (which I'm sorry to say it is hopeless).

  My first thought was the logic board was dead, whenever I pressed the power button the machine would not give a startup chime, the map graphic would not communicate with the display, literally, the only thing that seemed to work was the fans.

  I am the party for about 24 hours and came to him, this time, I noticed a diagnostic LED on the logic board was red, I Googled it told the LED must be switched off during normal operation and only lights up in case of a hardware error. The LED seems to indicate an error with the processor.

  The next step, I tried removed all devices (no improvement)

  The next step, remove the upper part of the two cards RAM; When I removed the card and tried to start the machine without the installed card slightly improved machine, giving a startup chime. Still no display or any other response from the computer.

  Here's what I did then:

  1. I tried to remove the last pair of RAM I have installed (I installed it only last year), this is the machine starts and the diagnostic LED on the motherboard remained OFF.

  2. when I reinstalled the RAM the machine went back to not start when turned on.

  3. then I tried rearranging the RAM so the suspect DIMM was on the lower riser card, remained light and the machine could not be started.

  4. remove the suspect RAM has allowed me to start once more, and given that the memory has been deleted the machine seems to work very well.

  I called Apple Support and said about what I had done, they seemed to think what I thought, which was 'Defective or broken RAM'; They suggested that I run the machine for a few days see if I get any errors/panic more with RAM on.

  While I was on the phone with Apple I ran the Apple Hardware Test, he returned "without problems."

  If fortunately I have a working machine once again, my question to the community is the following:

  This sounds like a logical error processor or RAM? -I hope it's just RAM failed, it is easy to replace, however, a panel of logic or processor is almost impossible to replace with a machine as old as mine.

  Thanks for any advice. I intend to run a test of 'extended' material now.

  Here's my report from kernel panic:

  Kernel_2016-06-11-173609_petes-Mac-Pro-2.panic:

  Description: Journal of panic (system breaks down)

  Size: 7 KB

  Last modified: 06/11/16 17:36

  Location: /Library/Logs/DiagnosticReports/Kernel_2016-06-11-173609_petes-mac-pro-2.panic

  Recent content: Sat Jun 11 17:36:09 2016

  Machine-check capabilities (cpu 0) 0 x 0000000000000806:

  family: 6, model: 23 stepping: Firmware 6: 1547

  Intel Xeon CPU E5462 @ 2.80GHz

  6 banks of error reports

  based on current thresholds error status

  Machine-check the status of 0 x 0000000000000005:

  Restart valid IP

  machine-check current

  Reporting of errors in the MCA records:

  IA32_MC0_STATUS (0 x 401): 0 x 1000000020000000 invalid

  IA32_MC1_STATUS (0 x 405): 0 x 0000000000000000 invalid

  IA32_MC2_STATUS (0x409): 0 x 0000000000000000 invalid

  IA32_MC3_STATUS (0x40d): 0 x 0020000000000000 invalid

  IA32_MC4_STATUS (0 x 411): 0 x 0000000000000011 invalid

  IA32_MC5_STATUS (0 x 415): 0xb200001084200e0f valid

  MCA error code: 0x0e0f

  Model specific error code: 0 x 8420

  Other information: 0x00000010

  Based on thresholds of status: no follow-up

  Status bits:

  Corrupt processor context

  Error enabled

  Error uncorrected

  panic (cpu 0 0x2aaf41 appellant): check the 0x003b47a6 Machine, thread: 0x1438d7a8, trapno:0 x 12, error: 0x0, records:

  CR0: 0 X 80010033, CR2: 0X819EA000 CR3: 0X00100000, CR4: 0 X 00000660

  EAX: 0X09118B80, EBX: 0X09119A80 ECX: 0 X 00000082, EDX: 0X000081E6

  ESP: 0XBFFFFA90, EBP: 0XBFFFFAC8, ESI: 0X000081E6 EDI: 0X00D00F90

  EFL: 0 X 00000246, EIP: 0X003B47A6

  Backtrace (CPU 0), Frame: return address (4 potential args on stack)

  0x819e18: 0x21b837 (0x5dd7fc 0x819e4c 0x223ce1 0x0)

  0x819e68: 0x2aaf41 (0x59dfe4 0x59e0d1 0x3b47a6 0x1438d7a8)

  0x819f58: 0x2a29f2 (0 x 1 0 x 0 0 x 0 0 x 0)

  Corresponding to the current thread BSD process name: apcupsd

  Mac OS version:

  10K 549

  Kernel version:

  10.8.0 Darwin kernel version: kills Jun 7 16:33:36 PDT 2011; root:XNU-1504.15.3~1/RELEASE_I386

  Name of system model: MacPro3, 1 (Mac-F42C88C8)

  Availability of the system in nanoseconds: 3331269067170

  discharged kexts:

  (none)

  kexts responsible:

  org.pqrs.driver.KeyRemap4MacBook 8.4.0

  com VMware.kext.vmnet 3.0.0

  com VMware.kext.vmioplug 3.0.0

  com VMware.kext.VMCI 3.0.0

  com VMware.kext.vmx86 3.0.0

  4.3.14 org.virtualbox.kext.VBoxNetAdp

  4.3.14 org.virtualbox.kext.VBoxNetFlt

  4.3.14 org.virtualbox.kext.VBoxUSB

  4.3.14 org.virtualbox.kext.VBoxDrv

  com.Google.filesystems.fusefs 2.0.3

  com.comodo.kext.FileAccessFilter 1.0.0

  com.cyberic.SmoothMouse 9

  com Apple.filesystems.UDF 2.1.1 - last load 38109909690

  com Apple.filesystems.cd9660 1.4.1

  com.apple.iokit.SCSITaskUserClient 2.6.8

  com Apple.filesystems.NTFS 3.4

  com Apple.filesystems.autofs 2.1.0

  com.apple.driver.AppleHWSensor 1.9.3d0

  com.apple.driver.IOBluetoothBNEPDriver 2.4.5f3

  com.apple.driver.AppleTyMCEDriver 1.0.2d2

  com.apple.driver.InternalModemSupport 2.6.2

  com.apple.driver.AppleHDA 2.0.5f14

  com.apple.driver.AudioAUUC 1.57

  com.apple.driver.AppleUpstreamUserClient 3.5.7

  com.apple.driver.AppleMCCSControl 1.0.20

  6.3.6 com.apple.kext.ATIFramebuffer

  1.1.9 com.apple.driver.AppleMCEDriver

  com.apple.Dont_Steal_Mac_OS_X 7.0.0

  com.apple.iokit.CHUDUtils 364

  com.apple.iokit.CHUDProf 366

  com.apple.driver.AudioIPCDriver 1.1.6

  com.apple.driver.AppleIntelYonahProfile 14

  com.apple.driver.AppleIntelPenrynProfile 17.1

  com.apple.driver.AppleIntelNehalemProfile 11.1

  com.apple.driver.AppleIntelMeromProfile 19.1

  com.apple.driver.ACPI_SMC_PlatformPlugin 4.7.0a1

  com.apple.driver.AppleLPC 1.5.1

  6.3.6 com.apple.ATIRadeonX3000

  com.apple.driver.CSRHIDTransitionDriver 2.4.5f3

  com.apple.BootCache 31.1

  com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1

  com.apple.driver.AppleFWOHCI 4.7.3

  com.apple.iokit.IOAHCIBlockStorage 1.6.4

  com.apple.driver.AppleUSBHub 4.2.4

  com.apple.driver.AppleIntel8254XEthernet 2.1.3b1

  com.apple.driver.AirPortBrcm43xx 423.91.27

  com.apple.driver.AirPortBrcm43224 428.42.4

  2.1.7 com.apple.driver.AppleAHCIPort

  com.apple.driver.AppleIntelPIIXATA 2.5.1

  com.apple.driver.AppleUSBEHCI 4.2.4

  com.apple.driver.AppleEFINVRAM 1.4.0

  com.apple.driver.AppleUSBUHCI 4.2.0

  com.apple.driver.AppleACPIButtons 1.3.6

  com.apple.driver.AppleRTC 1.3.1

  com.apple.driver.AppleHPET 1.5

  com.apple.driver.AppleSMBIOS 1.7

  com.apple.driver.AppleACPIEC 1.3.6

  com.apple.driver.AppleAPIC 1.4

  com.apple.driver.AppleIntelCPUPowerManagementClient 142.6.0

  com Apple.Security.sandbox 1

  com Apple.Security.Quarantine 0

  com 2.1.14 Apple.NKE.applicationfirewall

  com.apple.driver.AppleIntelCPUPowerManagement 142.6.0

  com.apple.iokit.IOSCSIMultimediaCommandsDevice 2.6.8

  com.apple.iokit.IOBDStorageFamily 1.6

  com.apple.iokit.IODVDStorageFamily 1.6

  com.apple.iokit.IOCDStorageFamily 1.6.1

  com.apple.iokit.IOATAPIProtocolTransport 2.5.1

  com.apple.iokit.IOSCSIArchitectureModelFamily 2.6.8

  com.apple.driver.AppleHDAHardwareConfigDriver 2.0.5f14

  com.apple.driver.DspFuncLib 2.0.5f14

  com.apple.driver.AppleProfileReadCounterAction 17

  com.apple.driver.AppleProfileTimestampAction 10

  com.apple.driver.AppleProfileThreadInfoAction 14

  com.apple.driver.AppleProfileRegisterStateAction 10

  com.apple.driver.AppleProfileKEventAction 10

  com.apple.driver.AppleProfileCallstackAction 20

  com.apple.iokit.IOFireWireIP 2.0.3

  com.apple.driver.AppleUSBAudio 2.7.6f6

  com.apple.driver.AppleHDAController 2.0.5f14

  com.apple.iokit.IOHDAFamily 2.0.5f14

  com.apple.iokit.KLog 3.7.5

  com.apple.iokit.IOSurface 74.2

  com.apple.iokit.IOBluetoothSerialManager 2.4.5f3

  com.apple.iokit.IOSerialFamily 10.0.3

  com.apple.iokit.CHUDKernLib 365

  com.apple.iokit.IOAudioFamily 1.8.3fc2

  com.apple.kext.OSvKernDSPLib 1.3

  com.apple.iokit.AppleProfileFamily 41.4

  com.apple.driver.AppleSMC 3.1.0d5

  com.apple.driver.IOPlatformPluginFamily 4.7.0a1

  com.apple.driver.AppleSMBusPCI 1.0.10d0

  com.apple.iokit.IONDRVSupport 2.2.1

  6.3.6 com.apple.kext.ATI5000Controller

  6.3.6 com.apple.kext.ATISupport

  com.apple.iokit.IOGraphicsFamily 2.2.1

  com.apple.driver.CSRUSBBluetoothHCIController 2.4.5f3

  com.apple.driver.AppleUSBBluetoothHCIController 2.4.5f3

  com.apple.iokit.IOBluetoothFamily 2.4.5f3

  com.apple.iokit.IOUSBHIDDriver 4.2.0

  com.apple.driver.AppleUSBComposite 3.9.0

  com.apple.driver.AppleFileSystemDriver 2.0

  com.apple.driver.XsanFilter 402.1

  com.apple.iokit.IOFireWireFamily 4.2.6

  com.apple.iokit.IOUSBUserClient 4.2.4

  com.apple.iokit.IO80211Family 320.1

  com.apple.iokit.IONetworkingFamily 1.10

  com.apple.iokit.IOAHCIFamily 2.0.6

  com.apple.iokit.IOATAFamily 2.5.1

  com.apple.iokit.IOUSBFamily 4.2.4

  com.apple.driver.AppleEFIRuntime 1.4.0

  com.apple.iokit.IOHIDFamily 1.6.6

  com.apple.iokit.IOSMBusFamily 1.1

  com.apple.kext.AppleMatch 1.0.0d1

  com.apple.security.TMSafetyNet 6

  com.apple.driver.DiskImages 289.1

  com.apple.iokit.IOStorageFamily 1.6.3

  com.apple.driver.AppleACPIPlatform 1.3.6

  com.apple.iokit.IOPCIFamily 2.6.5

  com.apple.iokit.IOACPIFamily 1.3.0

• Why disable SuperFetch on ssd, if the RAM is much faster than the ssd?

  Directed by Microsoft that SuperFetch and PreFetch must be disabled, if the OS is installed on an ssd, in accordance with article http://support.microsoft.com/kb/2727880. But SuperFetch is used for loading the data components of applications, which were very often used for RAM. Although the ssd is faster that a hard drive is not faster than the RAM. So, I do not understand why Microsoft suggest disabling this feature. The only reason why I want to understand, it's because of a limited RAM. If the RAM is sufficient beyond 6 GB, if we disable SuperFetch, then the boot time and increase the loading time of most used applications. I miss something here?

  The other question is about PreFetch. I feel, maybe wrong, it does the same thing with SuperFetch, with one major difference. It loads all the information data on the ssd or hard drive, instead of the RAM, in order to accelerate the launch of applications and time when the OS is installed on a hard drive to boot. If I'm right, let's disable the PreFetch it stores information for one ssd or hdd, while SuperFetch stores data of RAM information, which is much faster and so it must be enabled if there is a sufficient RAM.

  I look forward to reading the notice of a Microsoft software engineer.

  Hi Leventis,

  Prefetch copies frequently accessed files together into a contiguous on the disk area so that they can be located and loaded more quickly. That it takes a lot of old drives to recover data faster.

  SuperFetch predict what applications you run next and preload all the necessary data in the memory. She has also done that with startup files. And for all the three days he sends a defragmentation command to the OS drive that will cause problems in the SSD drives.

  In traditional hard drives (HDD) data are scattered throughout the disk, so that the operating system for access, it will take more time. It is suggested to perform a disk defragmentation. But storage technology is different in SSD, where, it records the data dynamically and it recovers more quickly. Who will be low down the burden on the RAM and the RAM can be used for uses such as for the opening of the games graphics high-end, etc..

  Hope this information is useful.

• Can I find out if I had to buy the Adobe Creative Suite 6 Design & Web Premium, but I subscribed to photography CC for only one month plans, can I unsubscribe it and use the one bought instead?

  Can I find out if I had to buy the Adobe Creative Suite 6 Design & Web Premium, but I subscribed to photography CC for only one month plans, can I unsubscribe it and use the one bought instead?

  I subscribed to the creative cloud only because I did not know that my College courses will be using other software too.

  I hope to unsubscribe to the creative Cloud version and use the purchased instead.

  But if it is not possible, I'll just use the CC version for this year and use the one bought on my other PC.

  Hi, NGOs,

  Yes, if you intend to use CS6, you can still use it after the cancellation of the plan of the CC photography, you can also improve your plan to plan photography to Creative Cloud applications

  If you wish to cancel your plan well photography please contact support by calling/chat for cancellation requests and billing queries:

  https://helpx.Adobe.com/contact.html?step=CCSN_membership-account-payment_cancel-your-memb ership_stillNeedHelp

  * Be sure to stay connected with your Adobe ID before accessing the link above *.

  You can also check the help below document:

  https://helpx.Adobe.com/x-productkb/policy-pricing/cancel-membership-subscription.html

  Please go through the Adobe - General conditions of subscription as well.

  He hopes to help!

  Rayyan

• The Adobe Desktop installation program will not load the app screen tab, all I see is the loading icon and runs continuously without ever loading. All the other tabs seem to load without any delay, only the app tab does not load. I tried to uninstall and

  The Adobe Desktop installation program will not load the app screen tab, all I see is the loading icon and runs continuously without ever loading. All the other tabs seem to load without any delay, only the app tab does not load. I tried to uninstall and reinstall the software, rebooted a couple of times and tried to activate the download of the Premier Pro via the website, but it still doesn't load in the desktop application.

  This solved the problem for me:

  Use the CC cleaning tool to resolve installation problems. CC, CS3 - CS6