CS6 product on the HARD drive that has been erased key

Similar Questions

• Cannot access the files from the internal hard drive that has been converted to drive external hard after the motherboard is dead

  I can't access the files from an internal hard drive that has been converted to drive external hard after the motherboard is dead. I think that my files are still there, as shown in the volume of the player volume ~ 500 gb which is almost completely full. But I can't access most files, including documents and settings. When I took 'ownership' of the folder, I could open the TI but then it showed everything that was in my documents and settings on the computer file I used to open it, not the documents of the car.

  I can't access the files from an internal hard drive that has been converted to drive external hard after the motherboard is dead. I think that my files are still there, as shown in the volume of the player volume ~ 500 gb which is almost completely full. But I can't access most files, including documents and settings. When I took 'ownership' of the folder, I could open the TI but then it showed everything that was in my documents and settings on the computer file I used to open it, not the documents of the car.

  Uhm... I think the issue here is a misunderstanding of what you watch.

  If you want to access your files from the old hard drive - you need to look in the right place.  If the old system was "Windows 7", "Documents and Settings" is the * wrong * place to look and "Users" would be the place to go.

  You * will * take ownership and change permissions on ALL (you want to propagate to all subfolders/files when do - to save time) in order to get them properly.

  New-->: Windows Vista/7 would have your files located in the directory 'Users' of the root of the drive - and then under your username.

  • \USERS\\Desktop\
  • \USERS\\Downloads\
  • \USERS\\Favorites\
  • \USERS\\Documents\
  • \USERS\\Music\
  • \USERS\\Pictures\
  • \USERS\\Videos\

  ... etc...

  Documents and settings to WIndows Vista/Windows 7 is a symbolic link and would lead to what you see if you tried to use it.

• If I put all my files on the C drive that has the operating system and make a recovery of keys one, will I lose my files?

  If I put all my files on the C drive that has the operating system and make a recovery of keys one, will I lose my files? drive C whereas the partition that has the operating system and drive D is the lenovo drive that has all the drivers lenovo and all those. Did I lose my files?

  Yes, the collection clears all of the C drive and you will lose your files. The solution would be to backup regularly to an external HARD drive and after the key one to also restore the files from the external hard drive.

  This has been answered before, if you do a search for "key recovery" it appears among the first results.

  http://forums.Lenovo.com/T5/IdeaPad-Y-U-V-Z-and-P-series/will-i-lose-my-files-if-i-do-one-key-recove...

• Is there a limit to the amount of the size of the hard drive that it can manage Windows Vista Ultimate?

  . I am trying to install a disk hard external sata 3 TB

  It would be only format 2.3 TB. Is there a limit to the amount of the size of the hard drive that it can manage Windows Vista Ultimate? If so, is there a way to enlarge it.

  Vista only supports drives of 3 TB for storage of the data and do not install the Vista operating system on this drive.

  Read this: http://msdn.microsoft.com/en-us/windows/hardware/gg463525.aspx

  J W Stuart: http://www.pagestart.com

• This hard drive is compatible with my laptop? Apple 80 GB HDD 3.5 SATA for my Compaq CQ62, the hard drive that I have for that one is a "WD 500 GB 2.5 SATA II.

  I plan to buy an Apple 80 GB hard disk 3.5 SATA for my Compaq CQ62, the hard drive that I have for you is a "WD 500 GB 2.5 SATA II.

  Ports appear as it will keep and everything, but I'm curious to know, if I get this drive, I'll be able to install my Macintosh on that hard drive and use it on my laptop Compaq CQ62 or not?
  If this isn't the case, then I'll be able to install Windows 7 or uBuntu on this hard drive? The hard drive will fit even on my laptop? Thank you!

  Why you want to replace a 500 GB with a 80 GB drive it?

  Macintosh is not an operating system

  A 80 GB drive is too small for a win7 PC

• Is there a limit on the size of the hard drive that can recognize ESX?

  Hello

  I would like to know if there is any limitation with regard to the size of the hard drive that can recognize an ESX 3.5 Server? I have a Dell server with 1.8 TB of HDD. When I try to install ESX 3.5 on it, ESX shows that space and be approzimately 1.4 TB. I understand that ESX requires little space, but I would not be the image that it's 400GO.

  Thanx

  Tejas

  What is a RAID?  You could have 6 300 GB drives, RAID requires treatment, and basically, 1 disc is overload, so it seems you are using RAID 5 (if you have 6 disks).  In this case, that is right you have 1.4 flying over, which is what ESX sees.

• Must the updates and hot fixs remain on the hard drive after having been loaded? Is the information provided in the operating system?

  Must the updates and hot fixs remain on the hard drive after having been loaded?  Is the information provided in the operating system? Or do the lonely stand.

  Original title: need for disk space

  Here are the official specifications of Toshiba for your PC...

  http://support.Toshiba.com/support/staticContentDetail?ContentId=638405&isFromTOCLink=false

  All interface PATA (IDE) connectors are a standard 40 pin.

  I know that there is no restriction on the mixture of ATA drives with different speed capabilities and no restrictions on what cable you use, whether 40 wire or 80 strand (but still 40 pins).

  Faster drives will only work at the speed of the slowest car on any cable and 80 strand cables are needed to make ATA66 or higher drives run at their native speed.

  In addition, no player can work faster than the motherboard chipset permits, in your case ATA66.

  My provider of trade has still some disks 3.5 '' PATA in stock, but these are becoming harder and harder to find. Indeed, it is possible that production has ceased and that suppliers are just exhausted stocks.

  I can certainly say that, when repairs this technology were more frequent, I never had problems with discs theoretically faster on the same cable as slower drives, nor by using faster on 40 cable strands discs. In fact, of many penny pinching manufacturers (some of them major) regularly used for the optical drive and hard drive on the same cable as the motherboard has two connectors, resulting in a decrease in performance on the disk hard (although most of the people would not have noticed the difference). Sometimes, the cable would be 40 strand (understandable if you are penny pinching) and sometimes the cable would be 80 strand (laughable if you are penny pinching because they are [were] more expensive).

  Pass your question about vacant below the sound card. Unless your text confused me, this space is for expansion cards no disk drives. Space that you reference is probably to the back of the PC. Hard drives are normally located toward the front of the dedicated PC "berries". Unfortunately, I could find no photo on the Toshiba site, and still less those internal.

  Tricky

• How can I get a driver that has been deleted

  I need how do I get a driver that has been deleted

  Hello

  go to the manufacturers website and download the driver again

  or try a restore of the system before this happened

  http://www.windowsvistauserguide.com/system_restore.htm

  If necessary do in safe mode

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

• Whenever I log on my computer, I get this 'Security warning' box you want vview only the content of the Web page that has been delivered safely

  Whenever I log on my computer, I get this 'Security warning' box you want vview only the content of the Web page that has been delivered safely?

  Open ie9,

  Click on the gear in the top right, symbol

  Click on Internet options,

  The custom level button and security section

  Scroll down and check the box

  Allow the display of mixed content.

  Apply and OK.

• I installed the new version of LIghtroom (2015) compared to the creative clouds.  Creative cloud said that I installed the new version.  However, the shortcut icon that has been installed does not start the new version.  Also, I went to the link propertie

  I installed the new version of LIghtroom (2015) compared to the creative clouds.  Creative cloud said that I installed the new version.  However, the shortcut icon that has been installed does not start the new version.  I also went on the link properties itself, but without success in starting.  How to launch the new version?

  Thank you, toinimj59.  I did this part and the installation is complete (there is apparently not earlier--included an acceptance of the general terms and conditions...)

  Solution 1: Disconnect from the desktop creative cloud app and reconnect

  1. Disconnect from and to, the app Office creative Cloud click here for instructions to return in
  2. Launch of Lightroom.

• Where can I find my Bookmrks on a disk hard slave who has been a key?

  My old computer motherboard died and I replaced it. I added my old hard drive to the new computer. I want to import the bookmarks to the new together upwards. Where can I find the Firefox bookmarks on this old hard drive?

  It won't be C:\\... BAD HARD DRIVE. It is on the hard drive that was in the old computer.

  Thanks in advance.

  Mike

  I got it! Thanks a ton, you guys. This is the first time I did it so I didn't realize it was that back up and restore the contraption.

  I have all my bookmarks back where they belong. You are awesome!

  Thank you!

• I'm trying to recover my documents on a hard drive that has a damaged copy of windows on it.

  I'm trying to recover the files on the computer of a friend who crashed some time ago. I can't get windows XP to boot at all, even in safe mode.

  When I set the old hard drive to another computer and try to access the folder my documents, it requires user name and password. I enter it and get a permission denied message. How can I access this data?

  Can I reinstall windows without wiping the hard drive and then try to take ownership of files? I'm so confused please help someone!

  You don't need to reinstall Windows.  Just take possession of the documents folder. Boulder computer Maven
  Most Microsoft Valuable Professional

• Recovery on a backup hard drive that was accidentally erased discs. How can I get another?

  My PC HP TouchSmart 600 all-in-one allows only a single copy of the recovery disc. I got mine on a HDD that has been accidentally deleted external backup. How can I get another set of recovery disks?

  Hello

  You can order a set of replacement recovery disks using the link below.

  Order HP recovery disks.

  If you have a problem with this link, order them directly from HP.

  If you live in the United States, contact HP here.

  If you are in another part of the world, begin here.

  Kind regards

  DP - K

• Determine the next action that has been taken in the FXV

  In the FXV, is there a way to find which button or a person clicked on a link? When I view the replay with submitted entry answer, I usually see a yellow box on the link or the button you click. Is there a way to search for visits or sessions for a specific control that has been selected?

  Hi Jordan.

  In my view, that the answer here is FxV titles not only each request HTTP (i.e. every shot), but also every HTTP response. So that he knows

  What answer he saw just after he saw a given shot.

  Robert

• picture change the white balance that has been implemented in the device after its import in lightroom 5

  My pictures change the balance of whites and the global settings that have been implemented in the unit after its import in lightroom 5. Met someone with something like that? Thanks to you all.

  Alex

  Screen 1 - this is what it looks like right after the import. The white balance is correct and just need a few changes.
  

  

  
  

  Screen 2 - However, In a few seconds it turns into this by itself. This can also happen when editing is finished, if I remove the image in Lightroom.
  

  

  Screen 3 - in order to restore it to a certain extent I have to select the predefined filter called 'Zero '.

  

  That means that you have inadvertently applied a preset import to have checked in the preferences of your Auto adjustments: