CS6 save the trace appears not

Similar Questions

• Firefox prompts to save passwords of websites. The key to the Password Manager icon appears on the left side of the address bar, but the corresponding window asking if I want to save the password or not, does not appear. I tried all the possible solutions

  I installed the latest version of Firefox on my laptop (Windows 7 Professional 64-bit). The thing is that firefox prompt to save passwords of websites. I'll explain you a little more away with an example: suppose I load www.gmail.com. When I login, the password manager key is displayed on the left side of the address bar, but the corresponding window which would ask if I want to save the password or not, does not appear. I tried all the possible solutions. It is true that when I restart firefox with disabled modules (safe mode), password manager works fine. But I don't really use Add-ons that could prevent firefox to save passwords. I disabled all add-ons and ran firefox in normal mode, but the password manager does not work yet. Please keep in mind that I tried everything and that any post not published so far describes a similar problem to mine case. Consider that I have the same I have configured the entire system from the beginning. The problem appeared again from the first time I launched firefox. At that time, I had not installed any antivirus software and there is no add-on with firefox. Hope someone can give me a valid solution...

  Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the extensions or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > appearance/themes).

  • Makes no changes on the start safe mode window.
  • https://support.Mozilla.com/kb/safe+mode
  • https://support.Mozilla.com/kb/troubleshooting+extensions+and+themes

  It is possible that there is a problem with key3db and signons.sqlite files that store the encrypted names and passwords in Firefox.
  
  Rename signons3.txt and signons.sqlite files in the Firefox profile folder.
  
  You can add .old files (key3.db.old and signons.sqlite.old) names or move them to another folder to make it possible to cancel the action.
  
  You must define a new master password after renaming or removing the signons3.txt and all the currently saved passwords are lost.
  
  If that worked, then you can delete the renamed files that are no longer needed.

  See:

  • "Troubleshooting" in http://kb.mozillazine.org/Password_Manager

• If I'm working on a project in a free trial of Premiere Elements, and then save the project (do not export it) and open it again in the full version of Premiere Elements, the watermark will be removed?

  If I'm working on a project in a free trial of Premiere Elements, and then save the project (do not export it) and open it again in the full version of Premiere Elements, the watermark will be removed?

  If you have made the timeline or out of a movie from the trial version, it will have this watermark on it.

  Once you have purchased and activated the software, you can remove the watermark by going to the folder directory on your computer where your project files are saved and deleting the folder Adobe Premiere elements preview files.

• Pencil tool (N) close the trace does not work, any idea?

  Pencil tool (N) close the trace does not work, any idea?

  with the completion of a path with the pencil tool, I don't get the small circle at the cursor level to close the path.

  Zoom click on the pencil tool in the tools Panel and you will see.

• Cs6 save the file for the printer company

  Question on master Parent AI file, or art presented in another file I send to the printer?

  I created a leaflet (2.83x11) that I can now add 3 to a sheet of 8.5 x 11 for 3 leaflets per leaf.  When I save the master flyer (the 2.83x11), I crushed my text in text outlines to 1200 dpi and rasterized my art at 400 DPi and then saved the file. Ok

  Then I open a new Board art 8.625 x 11.13 (to bleed) printing on the edge (border less) then place my Flyer 3 times on my plan of work and when I'm going to save this option to send to the printer here in lies my question (s)

  1. when I record a new workplan with a related Parent file this related info will save the file so that when my (printer) opens this file I. I bring the file Parent bound with it too on my USB key? Or the artboard will save all the contours and raster art on 8.65x11 the work plan?

  Take me to a second question

  2. when I go to save this new artboard flyer and 8.5 x 11. I'm asked or warned of 72 dpi rasterization of the newly placed flyer to be saved and then placed in the 1200 and 400 dpi in as mentioned above. But I think I should go effect > rasterize > high or other (fill in PPP)

  Here's the question if I save which place Parent, or the linked file and then rasterize, choosing 1200 as is the text of the first file is saved, it errors and says big enough to rasterize the 1200 dpi.  IF I rasterize say 400 dpi does now that sharp text I saved in the Parent bound 1200 file?   In other words how save you this file as it is stored in the master or the parent Flyer when you place it on a work plan for a printer?

  CS6 AI not cloud.

  Here's what I do.  I would like to see the screenshots of the dialog where you are notified to rasterize.  But, that aside except (ad I will continue when I have more time), the text in the presentation are vector curves.  No need to convert to text converted to outlines.  Leave the direct text, unless the printer ask contours.  When you generate the PDF file, the text becomes incorporated.  Resolution is located in the "exit".  You set the resolution of pixelation in Illustrator, if you applied some type of effects of rasterization (such as shadows).  It is, as far as I know, a maximum of 300 PPI in pixelation effects.  In General, when using a CTP (computer-to-plate) pre-press, a 5080dpi output resolution is common to generate a point as thin as 150 lines per inch.  Now get you to a point where you can understand the fundamentals and they understand no pixelation.  No deer at the level of the sender.

• Save the image does not remember last location recorded for Firefox 9

  Just updated for FF9. I'm is not just disappointed, but which are checked the the bug that causes save slot to remember where it was recorded the last file of individual sites instead of just where the last file has been saved to has not been set. Why is this? How can be addressed?

  For example, I have save a folder A Motifake image and an image of ihasahotdog to folder C. Then come back to Motifake and save a picture. Instead of folder C, save under opens to the folder instead of the folder C. I have direct save as to save the image in A file. The I'll go back to ihasahotdog, save a picture and instead of A folder, save under opens to folder C.

  This bug also occurs with all types of files, not just of images.

  The FF developers know that the "added functionality" that started with FF7 causing the FF remember the last download save the folder based on the domain in the URL instead of use the last folder saved on annoys many users both directly and by the lack of preference to toggle. Yet they will not fix it.

  Why they do that little matter how much a good idea, they think it is, most users hate it and do not want? And what is this B.S. "is under development"? They added in an updated version, why can't they get out as fast as it was added?

  Firefox 11 should be released about 12 weeks after the release of Firefox 9, so it should be in March.

• anyway to save the photos do not roll in camera?

  Hello

  I have an original iPad 64gig. I have a lot of pictures on it but only 21 or more are imported from the iPad... I guess that they are the only ones in the film. Is it possible to save the photos that aren't in the camera? I have several hundred who are on the iPad and I really want to save on my mac. I don't remember how or where I put them out there at this point.

  Thanks in advance!

  Frank

  Pictures not in the album film have been synced to the iPad to a computer running iTunes on the computer. If you have never synchronized the iPad with your Mac, make sure iPhoto or the application of Photos on the Mac to see if the pictures are already there.

• Why has travel CS6 on the new disc not released space in the original location?

  For a long time, I have reinstalled CS6 Design & Web Premium on my G drive, as I was running out of space on my disk C (SSD). Yesterday, I've upgraded to a new and much more big SSD as my system disk and decided to return CS6 on drive C. However, the results were not as I expected. Free space on my C drive has reduced to 3 GB, which seems plausible, but rather that it is accompanied by a similar increase of the free space on drive G, free space actually declined by 0.4 GB .

  After checking the contents of the folders Program Files/Adobe and Program Files (x 64) /Adobe on both drives, it seems that Fireworks CS6 nor Flash CS6 has been moved during this installation, that still doesn't explain why the free space on my disk G decreased after reinstalling (despite running CCleaner and do a restart).

  Anyone can shed some light on this problem?

  Where it is relevant, I tried reinstalling using the copy of CS6 Design & Web Premium I downloaded originally from Adobe in 2012, which was perhaps not a good idea, since there are now a bunch of 1.7 GB of updates must be reinstalled.

  David

  I uninstalled CS6 Fireworks and Flash CS6 drive G and them reinstalled on drive C. This time, it worked (Acrobat X Pro is also still on my G drive, but I have other issues that currently affect my ability to get him back on the C drive).

  My first attempt to migrate CS6 disk C has been done by simply running the installer CS6 Design & Web Premium, i.e., I do not think that I first uninstalled the existing software. The installation program displays a clear indication that I installed on the C drive, which led me to believe that without prior uninstall was necessary, but I realize that I had missed see the popup messages saying "an earlier installation of this product were found. This product will be installed at its original location'.» It seems so my relocation a week ago (without a prior uninstall) moved to nothing!

  It was before I realized that I had managed to pass all components of the CS6 on drive G a few years ago, but it seems now that if my memory was at fault and only Fireworks, Flash, and Acrobat have been moved to this disc.

• Problems with the colors appears not properly.

  This has been a persistent problem. I created links in my pages and assigned different colors links to help the user determine which link it is. On some pages, the colors appear correct and the next page color links appear in black. Sometimes the entire page links are black, and sometimes it's just a little. I deleted all the links and the colors and started around, but not luck.

  Has anyone had this problem and overcome? What is the cause of this problem?

  I think that you are referring to the visited links, which, by default, change the revisit the page.

  You can try the suggestion mentioned here to return to the default color on visit:

  http://StackOverflow.com/questions/8188060/how-to-make-link-not-change-color-after-visited

  If it's not you're talking about, then please provide the url of the page and screenshots where you see a color change.

  Thank you

  Sanjit

• 'Save the exception' does not work... ?

  Hi all
  
  In why I am not able to catch exceptions of code below... EMP_LOG. Ename size is 100 characters
  --------------------------------------------------------------------------------------------------
  DECLARE
  
  TYPE EMPTYPE IS TABLE OF THE varchar2 (101)
  INDEX OF DIRECTORY;
  
  EMPTAB EMPTYPE.
  
  EXCEPTION MY_EXCEPTION;
  PRAGMA EXCEPTION_INIT (MY_EXCEPTION,-20001);
  
  BEGIN
  
  SELECT ENAME
  BULK COLLECT INTO EMPTAB
  FROM EMP;
  
  EMPTAB (2): = RPAD (EMPTAB (2), 101, ' ');
  EMPTAB (4): = RPAD (EMPTAB (4), 101, ' ');
  
  FORALL I IN EMPTAB. FIRST... EMPTAB. FINALLY SAVE THE EXCEPTIONS
  INSERT INTO EMP_LOG (ENAME)
  VALUES (EMPTAB (I));
  
  COMMIT;
  
  EXCEPTION MY_EXCEPTION THEN
  
  BECAUSE me in 1... % BULK_EXCEPTIONS SQL. COUNTY
  LOOP
  DBMS_OUTPUT. Put_line ('Record' |) SQL % BULK_EXCEPTIONS (i) .error_index |' original mistake ' | I have |
  ': '|| SQL % BULK_EXCEPTIONS (i). ERROR_CODE | » '|| SQLERRM (-SQL % BULK_EXCEPTIONS (i).) ERROR_CODE));
  
  END LOOP;
  
  END;
  
  --------------------------------------------------------------------------------------------------
  
  Rgds,
  PC
  
  Published by: PC Sep 16, 2010 12:39 AM
  
  Published by: PC Sep 16, 2010 12:44 AM

  1. it is always useful to include the error message you have met.

  2. Please describe the tables EMP and EMP_LOG.

• I need help for my DCR-TRV280 appear on WIn7 and save the tape (do not have the disc)

  I tried to download the PMB software, but I have no disk so it won't let me do anything. The site says the software will already be on my computer for viewing, but nothing happens when I plug the mini-usb cable. Windows Movie Maker not getting anything either.

  Again, the camera I have is a Sony Handycam DCR-TRV280

  Hi gymjunkie,

  The DCR-TRV280 Camcorder will not support USB streaming. You can connect the camcorder to the Windows 7 computer using the FireWire cable or supplied A / V cable. USB streaming is only compatible with Windows XP computer.

  For A / V transfer see the link below.

  https://us.en.KB.Sony.com/app/answers/detail/A_ID/37892

  See the link below for FireWire transfer.

  https://us.en.KB.Sony.com/app/answers/detail/A_ID/37893

  Kind regards

  Jeevan

• How download Photoshop CS6 when the link does not appear on my account more?

  Hello,
  I have Adobe Photoshop CS6 Extended Student and Teacher Edition.It's the last version you could have without paying each month for Photoshop suscription..
  I would like ton reinstall it on my computer as Bridge doesn't work anymore.
  But i can't download again my software because there is no link anymore on my account
  Please help...
  
  Thanks a lot!
  			 
  Hello
  You can use the link here Download Adobe Creative Suite 6 applications
  Let us know if this helps!
  		   

• I can't get anything to download... the window in the top left corner after double clicking on the THUMB or SAVE the window does not appear.

  This happened after I stupidly deleted some programs I thought that no need to free up space.

  is the preference to show the downloads window download boot enabled in firefox > options > general?

  You can also try resetting firefox (this will keep your bookmarks and passwords).

• CS6 again, the software is not available to decode

  I use Encore CS6 to create a slideshow for a client. It has 488 photos she needs, transformed into a slideshow with the file names used as a caption on the images. It is easy to access by selecting all images, and then by clicking on the option of the use of subtitles, but when I go to try to burn the DVD it stops and gives me a message error "software used to decode this media is not present on your system.

  Googling the error message gave me several hits, indicating that large image sizes will give this error, so I tried shrinking the largest without success. So today I went through all the 488 images (thank God for the batch!) to resize to 720 x 480 at 72 dpi. Even narrowed it down to these proportions I ALWAYS get the decoder error when you try to create the DVD.

  Try smaller quantities of images also gave me the question.

  I am at a loss to know how to get this project done for her and I am short on time. Advice?

  The cause of this problem is still image files where the pixel size is too large.

  http://helpx.Adobe.com/Encore/KB/error-software-used-decode-media.html

  And in this example where it was not a question of image, the user has solved the problem of re-encoding of the problem file.

  http://forums.Adobe.com/message/6004428#6004428

  Create a new project yet. Import only ONE of your images that is 720 x 480 and it's RGB.

  You get the error?

• CS6 'Bought the series' does not

  Hello

  I bought a year ago for CS6 Web Premium Edition. I installed it on my desktop and my laptop.

  Today I trashed PhotoShop, using the Adobe Creative Cloud Cleaner. No idea how it happened.

  So, I wanted to reinstall.

  I could reinstall only that by clicking on "trial". My set has not been accepted.

  Also after installation, that my series is not accepted, the same series that is on my Adobe ID page.

  ??

  All solutions?

  Gr. M

  Mac OS x 10.6.8

  Shame, shame, I thought I had purchased a full license, but it is was just valid for one year. I renew my subscription. (higher education)

  Not yet used to this business model.

  Sorry for the inconveience.