CSAuth Service automatically restart - 2.6 NT

We have a problem with the CSAuth service, it keeps restarting on a daily basis at about 01:00 and 13:00. This is what appears in the event log:

Source: CIscoAAA

Event ID: 5

CSMon Message: CSAuth Service was stopped or paused by the system. Follow-up suspends until the service is restarted. Monitoring of CSRadius stopped at service load CSAuth who has been arrested or suspended by the system... Monitoring of CSTacacs stopped at service load CSAuth who has been arrested or suspended by the system...

It restarts then 10 seconds later. In the ACS service management page, to test the connection there every 1 minute, in case of failure to restart all the parameters. I guess it's fine as it appears to do a job, but I would like to know why this is happenning.

Suggestions?

Thank you.

You do the replication to another ACS server? During replication, the CSAuth service is stopped, so if it happens on a regular basis 12 hours is perhaps the cause.

Tags: Cisco Security

Similar Questions

What is the correct way to automatically restart a failed Service?

When / how I should restart a failed javafx.concurrent.Service? I have an exception handler that is Worker.State of the Service and restarts the Service if an exception is handled successfully. Observers who are saved before the error handler see a lifecycle for the worker while observers registered after the error handler see a different life cycle. Here is an example of what I mean:

import javafx.application.Application;
import javafx.application.Platform;
import javafx.concurrent.Service;
import javafx.concurrent.Task;
import javafx.concurrent.Worker;
import javafx.scene.Scene;
import javafx.scene.control.Button;
import javafx.stage.Stage;


public class RetryingServiceExample extends Application {
    private int retryCount = 1;


    @Override
    public void start(final Stage primaryStage) throws Exception {
        String osName = System.getProperty("os.name");
        String javaVersion = System.getProperty("java.version");
        String vmInfo = System.getProperty("java.vm.version") +
                " (" + System.getProperty("os.arch") + ")";


        System.out.println("OS: " + osName);
        System.out.println("Version: " + javaVersion);
        System.out.println("VM Info: " + vmInfo);
        System.out.println("----------------------------------------");


        Service<Void> service = new Service<Void>() {
            @Override
            protected Task<Void> createTask() {
                return new Task<Void>() {
                    @Override
                    protected Void call() throws Exception {
                        if(retryCount > 0) {
                            retryCount--;
                            throw new Exception("Fake exception");
                        }
                        return null;
                    }
                };
            }
        };


        final StringBuilder sb1 = new StringBuilder("#1...\r\n");
        service.stateProperty().addListener((o, old, newState) -> {
            sb1.append(old).append(" --> ").append(newState).append("\r\n");
        });


        service.stateProperty().addListener((o, old, newState) -> {
            if(newState == Worker.State.FAILED) {
                service.restart();
            }
        });


        final StringBuilder sb2 = new StringBuilder("#2...\r\n");
        service.stateProperty().addListener((o, old, newState) -> {
            sb2.append(old).append(" --> ").append(newState).append("\r\n");
        });


        service.start();


        Button close = new Button("Close");
        close.setOnAction(event -> {
            System.out.print(sb1.toString());
            System.out.println();
            System.out.print(sb2.toString());
            Platform.exit();
        });
        primaryStage.setScene(new Scene(close));
        primaryStage.show();
    }


    public static void main(String[] args) {
        launch();
    }
}

There will be no output until you click Close. Here is the result:

OS: Windows 8.1
Version: 1.8.0_05
VM Info: 25.5-b02 (amd64)
----------------------------------------
#1...
READY --> SCHEDULED
SCHEDULED --> RUNNING
RUNNING --> FAILED
FAILED --> CANCELLED
CANCELLED --> READY
READY --> SCHEDULED
SCHEDULED --> RUNNING
RUNNING --> SUCCEEDED

#2...
READY --> SCHEDULED
SCHEDULED --> RUNNING
FAILED --> CANCELLED
CANCELLED --> READY
READY --> SCHEDULED
RUNNING --> SCHEDULED
SCHEDULED --> RUNNING
RUNNING --> SUCCEEDED

I find life a lot easier to reason about junior. It is the cycle of life I expected to get by restarting Service method practice failed() because, according to the JavaDoc, it has the same effect that is assured to be the last wise listener. See my related bug report:

https://JavaFX-JIRA.Kenai.com/browse/RT-36771

I find the second cycle of life more difficult to follow, but it's the only behavior I can get without using Platform #runLater (.) to restart the Service. I can't quite yet reason on how the transition from EXECUTION to FAILURE becomes hidden.

Using Platform #runLater (...) when you restart the Service in the most reliable way to get the behavior I prefer? Is it possible to use Platform #runLater (...) to get to the back of the queue like that? Is it OK to restart a Service from a listener of the Worker.State or is it something that should be avoided?

Martin has responded to this in the bug report:

Let's not the example of the forum. You're basically a (State) property is changed on the inside it's listener property, i.e. the listeners will get notified when it has been changed to a completely different State. This should be avoided and the best way to do so is Platform.runLater ().

iMac freezing and automatically restarts randomly

Hello

Hello

I'm a new mac user. I got an imac, but I'm having problems from the beginning.

Freeze the computer when using and automatically restarts randomly.

iMac 27 inches, (end of 2015)

3.2 GHz Intel Core i5 - 8 GB RAM - 1 TB FusionDrive

AMD Radeon R9 M390

OS X El Capitan 10.11.3

I brought the computer to a genius bar. No known hardware issues. They reset the mac to factory settings, but already during the first launch of configuration, the computer froze again. For a few days, everything was ok while the problems started again. I only certified software: printer Canon and Adobe Creative Cloud. I tried to change the position, to connect the mac to the router with the cable to the same WiFi spot left offline, but the problem persists. sometimes with intervals of 2 hours to others 4 times in an hour. Write an email, with safari or even left (do not use)

I tried new Apple Diagnostics and disk utility both without errors even if disk utility displays more ssd.

The console since the last crash log:

17/02/16 17:40:20, com.apple.AddressBook.InternetAccountsBridge [510 326]: dnssd_clientstub ConnectToServer: connect()-> test number: 2

17/02/16 17:40:20, com.apple.AddressBook.ContactsAccountsService [328 548]: [accounts] current connection, connection of pid 459, doesn't have account access.

17/02/16 17:40:20, com.apple.ncplugin.FindMyFriends [459 548]: [accounts] could not update the account with identifier 545110F6-2B83-4D5C-933D-5BA8942FA5FF, error: error Domain = ABAddressBookErrorDomain Code = 1002 '(null) '.

17/02/16 17:40:20, com.apple.AddressBook.ContactsAccountsService [328 697]: [accounts] current connection, connection of pid 361, has no access to account.

17/02/16 17:40:20, fmfd 697 [361]: [accounts] could not update the account with identifier 545110F6-2B83-4D5C-933D-5BA8942FA5FF, error: error Domain = ABAddressBookErrorDomain Code = 1002 '(null) '.

17/02/16 17:40:21, 069 via [85]: location icon should now be in "inactive".

17/02/16 17:40:21, com.apple.AddressBook.InternetAccountsBridge [510 426]: dnssd_clientstub ConnectToServer: connect()-> tent No.: 3

17/02/16 17:40:21, 662 mds [64]: (DiskStore.Error:1417) file dev:16777228 unexpected storeDev:16777224 mode: 41ff Tip: 1294302 oid:1294302 ino:2 fsEvents:0 / / Volumes-Lexar/Volumes/Lexar

17/02/16 17:40:21, 662 mds [64]: (DiskStore.Error:1417) file unexpected dev:16777226 storeDev:16777224 mode: 41ff Tip: 1294301 oid:1294301 ino:2 fsEvents:0 / Volumes/USB20FD/Volumes/USB20FD.

17/02/16 17:40:21, 679 mds [64]: (DiskStore.Error:1417) file dev:754974722 unexpected storeDev:16777224 mode: 416 d Tip: 424484 oid:424484 ino:5 fsEvents:0 / home-/ home

17/02/16 17:40:21, 679 mds [64]: (DiskStore.Error:1417) file dev:754974721 unexpected storeDev:16777224 mode: 416 d Tip: 424483 oid:424483 ino:3 fsEvents:0 / net-/ net

17/02/16 17:40:22, com.apple.AddressBook.InternetAccountsBridge [510 518]: dnssd_clientstub ConnectToServer: connect() has no path: / var/run/mDNSResponder Socket: 4 Err:-1 Errno:1 operation not permitted

17/02/16 17:40:22, com.apple.AddressBook.InternetAccountsBridge [510 525]: dnssd_clientstub ConnectToServer: connect()-> test number: 1

17/02/16 17:40:22, com.apple.xpc.launchd [1 902]: (com.adobe.ARMDCHelper.cc24aef4a1b90ed56a725c38014c95072f92651fb65e1bf9c8e43c37 a23d420d [397]) Service came out with abnormal code: 111

17/02/16 17:40:23, com.apple.AddressBook.InternetAccountsBridge [510 616]: dnssd_clientstub ConnectToServer: connect()-> test number: 2

17/02/16 17:40:23, 871 safari [308]: KeychainGetICDPStatus: key :-25300

17/02/16 17:40:23, 871 safari [308]: KeychainGetICDPStatus: status: power off

17/02/16 17:40:24, 391 launchd [1]: BUG in libdispatch: 15 d 21-1631 - 0x0

17/02/16 17:40:24, 392 networks [177]: BUG in libdispatch: 15 d 21-1631 - 0x0

17/02/16 17:40:24, 392 configd [54]: BUG in libdispatch: 15 d 21-1631 - 0x0

17/02/16 17:40:24, 711 com.apple.AddressBook.InternetAccountsBridge [510]: dnssd_clientstub ConnectToServer: connect()-> tent No.: 3

17/02/16 17:40:25, com.apple.AddressBook.InternetAccountsBridge [510 810]: dnssd_clientstub ConnectToServer: connect() has no path: / var/run/mDNSResponder Socket: 4 Err:-1 Errno:1 operation not permitted

17/02/16 17:40:29, 416 lsd [298]: LaunchServices: currently 0 installed placeholders:)

)

17/02/16 17:40:32, 027 warmd [63]: [_bootcachectl_filter_history_cpdk:1946] Impossible to pin 50623 scopes (1133,12 MB) to cpdk 2D7E6D8B-3BF4-4B7C-A6A3-70A35E72CFC6: 0xe00002c2

17/02/16 17:40:33, 435 SpotlightNetHelper [367]: tcp_connection_destination_handle_tls_close_notify 2 Jack of closure due to the TLS CLOSE_NOTIFY alert

17/02/16 17:40:33, 435 SpotlightNetHelper [367]: tcp_connection_tls_session_error_callback 2 __tcp_connection_tls_session_callback_write_block_invoke.434 error 32

17/02/16 17:40:33, 459 DCs [307]: sync with system failure SOSAccountThisDeviceCanSyncWithCircle: Domain = com.apple.security.sos.error error Code = 1035 "account identity not defined' UserInfo = {NSDescription = identity account not defined}

17/02/16 17:40:34, 031 SpotlightNetHelper [367]: tcp_connection_tls_session_error_callback 7 __tcp_connection_tls_session_callback_write_block_invoke.434 error 22

17/02/16 17:40:34, 031 SpotlightNetHelper [367]: tcp_connection_tls_session_error_callback 6 __tcp_connection_tls_session_callback_write_block_invoke.434 error 22

17/02/16 17:40:34, 031 SpotlightNetHelper [367]: tcp_connection_tls_session_error_callback 5 __tcp_connection_tls_session_callback_write_block_invoke.434 error 22

17/02/16 17:40:34, 031 SpotlightNetHelper [367]: tcp_connection_tls_session_error_callback 3 __tcp_connection_tls_session_callback_write_block_invoke.434 error 22

17/02/16 17:40:47, sandboxd 933 [137]: systemsoundserve (269) ([269]) deny/private/var/root file-read-metadata

17/02/16 17:41:53, 678 safari [308]: KeychainGetICDPStatus: key :-25300

17/02/16 17:41:53, 678 safari [308]: KeychainGetICDPStatus: status: power off

17/02/16 17:43:59, 149 disk utility [554]: connected to the demon. Language: English

17/02/16 17:43:59, 149 disk utility [554]: connected to the demon. Language: English

17/02/16 17:44:09, 525 console [558]: unable to connect (_consoleX) out of (NSApplication) (ConsoleX): missing setter or instance variable

17/02/16 17:44:17, 037 safari [308]: KeychainGetICDPStatus: key :-25300

17/02/16 17:44:17, 037 safari [308]: KeychainGetICDPStatus: status: power off

17/02/16 17:44:27, syncdefaultsd 220 [559]: accountsd has been removed from the sync of apps.

17/02/16 17:49:54, 692 safari [308]: tcp_connection_tls_session_error_callback 9 __tcp_connection_tls_session_callback_write_block_invoke.434 error 22

17/02/16 17:49:54, 000 syslogd [45]: sender ASL statistics

17/02/16 17:56:55, 521 CalendarAgent [341]: [com.apple.calendar.store.log.caldav.coredav] [refusing to analysis for PROPPATCH response because of the content-type: text/html; charset = UTF-8].]

17/02/16 17:56:55, CalendarAgent 566 [341]: [com.apple.calendar.store.log.caldav.coredav] [refusing to analysis for PROPPATCH response because of the content-type: text/html; charset = UTF-8].]

17/02/16 17:56:55, 584 CalendarAgent [341]: [com.apple.calendar.store.log.caldav.coredav] [refusing to analysis for PROPPATCH response because of the content-type: text/html; charset = UTF-8].]

17/02/16 17:56:55, 670 CalendarAgent [341]: [com.apple.calendar.store.log.caldav.coredav] [refusing to analysis for PROPPATCH response because of the content-type: text/html; charset = UTF-8].]

17/02/16 17:56:55, 694 CalendarAgent [341]: [com.apple.calendar.store.log.caldav.coredav] [refusing to analysis for PROPPATCH response because of the content-type: text/html; charset = UTF-8].]

17/02/16 17:56:55, CalendarAgent 742 [341]: [com.apple.calendar.store.log.caldav.coredav] [refusing to analysis for PROPPATCH response because of the content-type: text/html; charset = UTF-8].]

17/02/16 18:00:16, 000 illegal product [0]: BOOT_TIME 1455750016 0

17/02/16 18:00:18, 000 syslogd [45]: notice of Configuration:

ASL Module 'com.apple.AccountPolicyHelper' claims the selected messages.

These messages may not appear in the standard system log files or in the database of the ASL.

Thanks for your help,

Marco

These must be run as administrator. If you have only one user account, you are the administrator.

Please launch the Console application in one of the following ways:

☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top).

☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.

☞ Open LaunchPad and start typing the name.

In the Console window, select

DIAGNOSIS AND diagnostic USE information reports ▹ System

(not diagnose them and use Messages) in the list of logs on the left. If you don't see this list, select

List of newspapers seen ▹ display

in the menu bar.

There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points downwards. You will see a list of reports. A report of panic has a name that begins with "Kernel" and ends with ".panic." Select the most recent. The content of the report is displayed at right. Allows you to copy and paste to validate all of the content, text, not a screenshot.

If you don't see any report, but you know, there was a panic, you have chosen diagnostic and using the list of Log Messages. INFORMATION on the USE of DIAGNOSTIC AND choose instead.

In the interest of privacy, I suggest that, before posting, you change the UUID ' anonymous, ' a long string of letters, numbers and dashes in the header of the report, if it is present (it cannot be). "

Please do not post other types of diagnostic report.

I know that the report is long, perhaps several hundred lines. Please report all this anyway.

When you post the report, an error message may appear on the web page: "you have included content in your post that is not allowed", or "the message contains invalid characters." It's a bug in the forum software. Thanks for posting the text on Pastebin, then post here a link to the page you created.

If you have an account on Pastebin, please do not select private in exposure menu to paste on the page, because no one else that you will be able to see it.

Update Windows automatically restarts the computer. I would like to disable this feature.

Update Windows automatically restarts the computer. I would like to disable this feature. I'm running a machine business with complex projects requiring a configuration long and delicate. The details below:
Type of operating system: Windows 7 Ultimate
Problem: Status of the project lost after auto restart during the night
Require: A method of disabling automatic restart after an automatic update is happening.
Tried: I already tried looking in the registry for an appropriate key change, but no have been found appropriate.

Aelryn,
You can configure Windows update to meet your needs, for example, download the update and then let me choose when to install the same. This way you always get the automatic updates but you chose when and where and how to install updates at a time that is convenient.

Then I suggest to change the Automatic Updates settings to meet the needs of PAHO.

Choice, you can turn off to THE (not recommended), you can adjust to download updates only and allow you to install them at a convenient time, you can adjust information only, or you can leave to do what he likes.

If you update, you must restart sometime in the case otherwise you are not protected and you might as well do not update at all. Everything is a matter of choice. One size does not fit all, so a choice can be made. I have updates informed me only, then I decide what, when and how to do to install the updates. It's my choice.

FYI -.
http://blogs.technet.com/Mu/archive/2008/10/02/Windows-Update-and-automatic-reboots.aspx
TaurArian [MVP] 2005-2010 - Update Services

Windows XP: Windows XP automatically restarts when the logon screen is delivered.

I installed Windows XP last year. But recently there is a problem with my Windows XP. (My Windows XP is joined to a domain).

When I booted my Windows XP

(1) I joined to a domain.

(2) I turned on my computer.

(3) when the "Windows XP" loading screen disappeared, the opening of session came.

(4) until I press Ctrl-Alt-Delete, it is automatically restarted my computer.

Can anyone suggest me some ideas?

I started in safe mode. Nothing happens.

I also tried to press F8 and select "last good known...". «It worked, no automatic restart, I don't want to press F8 and select "last know good...» "each time when I tuen on my computer.

In mode "last known...". "I was able to login but when I want to stop, the system has restarted rather than stop it.

Additional information to my Windows XP:

Windows XP Professional, Service Pack 3. 1.95 GB of RAM

Hello

Like you are on a domain, the question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums.

http://social.technet.Microsoft.com/forums/en-us/itproxpsp/threads

CUCM Cluster services are restarted restore when the editor?

Hello

Cluster CUCM services are restarted when I perform a restore on the publishing server?

Thank you.

Hello

Services are not restarted on the cucm cluster automatically, however you will need to perform a restart of the cluster after the restore is complete.

HTH

Manish

Windows 7 slow shutdown and automatic restart

My Windows 7 Ultimate Service pack 1 64-bit takes a long time to shutdown and restarts itself. My PC all the hardware and software drivers are updated (iTunes, etc.) are fully updated and has the latest updates for Windows (optional but Important) Installed.When I select shut down, it is the screen of closing and will show 'Shutting Down' with this wheel that runs for a long time, the time and automatically restarts without BSOD or Errors.My PC configuration-i5 2500K Stock , 8 GB at 1333 MHz Ram, Intel DH67CL Mobo, Samsung SSD 840 120 GB SSD (with Windows 7 Ultimate SP1 and Windows XP Pro SP2 64 Bit time and installed in IDE Mode) 500 GB Seagate HDD, Zebronics PSU, LG DVD Writer.I currently had not tried all fixes. Please help me and thanks

Hi Bilodeau,

You did changes to the computer before the show?

If your computer seems to close slowly (or not at all) starts slowly, or if it is not energy saving modes, it is possible that a program or device driver is interfering with Windows power settings.

Method 1: I suggest you try the steps from the following link:

Why my computer won't turn on or off quickly?
http://Windows.Microsoft.com/en-CA/Windows/computer-wont-turn-on-off-quickly#1TC=Windows-7

Method 2: I'll help you with this problem. I suggest you follow the steps in the article.

Optimize Windows 7 for better performance

Slow PC? Optimize your computer for peak performance

Note: If bad sectors are found in the hard drive, then it could try to fix this particular sector. If you have any data on that, it can get lost.

Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

I hope this helps. Let us know if you need help with Windows related issues. We will be happy to help you.

oradim.exe automatic restart of windows
Operating systems: Windows server 2003 r2
DB version: 10.2.0.3

When the instance is down, windows tries to automatically restart the instance using oradim.exe.
But it is not picking up correct pfile so that it starts. I want to change that.

Windows automatically runs the following statement: (from oradim.log)

C:\oracle\product\10.2.0\db_2\bin\oradim.exe-demarrage-SID db123 - usrpwd * - log oradim.log - nocheck 0

Not able to understand where it picks up this info.

How do I change that to pick up different pfile?

I checked HKEY_LOCAL_MACHINE\system\currentcontrolset\services\oraclestartdb123, have info related to oracle.exe

Thank you
ADK wrote:
is it possible to know with what parameters oracle.exe call oradim.exe

as suggested by renee_mathieu, if I run the following command, oradim-edit - sid - pfile "new_path", it collects will be this new pfile next time if she tries to restart in a similar situation?

If you use oradim-edit - sid... a registry key will be created similar to:

HKEY_LOCAL_MACHINE\SOFTWARE\ORACLE\KEY_\ORA__PFILE

This key value will be read during startup of the service of oracle.exe and used.

If you want to dig deeper, you can use a Microsoft Sysinternals Process Monitor tool on the server/host to capture activity during the start of the service.

Use your search engine of choice to learn more about Process Monitor (especially the filtering of events).

For example, on a local test system Process Monitor shows the following for one of my test case (abbreviated version):

Process name:
Oracle.exe

Command line:
C:\oracle\11.2\database\bin\oradim.exe-demarrage-SID v112 - usrpwd xyzxyz"" - log oradim.log - nocheck 0

On this system, I do use a pfile file but you can see what spfile served as follows (short version):

Operation: IRP_MJ_CREATE
Result: SUCCESS
Path: C:\Oracle\11.2\database\database\SPFILEV112. ORA

Don't forget that there is collaboration between binary/process/registry is not always as obvious as you might like.

Have been left in charge all night I get the message "after reboot requires the password" question is why is this automatic restart, and is this normal

Have been left in charge all night I get the message "after reboot requires the password" question is why is this automatic restart, and is this normal

Occasionally, it may restart because something was wrong. It is not a problem unless this happens frequently.

HP Pavilion 763n automatically restart after installing additional memory

I just installed more memory for my Compaq HP Pavilion 763n. My operating system is Windows XP and the memory card, I bought 1 GB DDR - 266 (PC2100) Non - ECC Unbuffered 184-pin 2.5V CL = 2.5 64 X 8 memory. When I installed the new memory, I restarted my PC - and everything worked fine, but the PC automatically restarts every 5 to 10 minutes.

I installed the new memory card of 1 GB two ways - in the second location of memory (virgins) next to the original card of 512 MB, then I turned off the PC and installed the new card of 1 GB instead of the original card of 512 MB (I removed the card to origin), thinking that maybe the problem.

It still restarts automatically every 5 to 10 minutes. I now use the PC with the original sound of the memory only card, so the problem is certainly related to the installation of the memory card.

Anyone has an idea why my PC is doing this and what to do?

Thank you very much for all your comments!

The Hynix used d ' award by OEMs and seems to be a good memory. I'm not fallen on the Elpida brand.

Why the computer browser Service automatic stop?

Why the computer browser Service automatic stop?

Please follow the steps:

1. access user Admin / user connected

2. my computer icon > properties-advance-performance (setting) > Data Execution Prevention

3. turn on DEP for all programs and services except those I select.

4. click on Add button > select service path C:/system32/select computer browser service and other.

OK 5.

Receive automatic updates for Windows XP "error 127: the specified procedure could not be found." Also "error 0 x 80240036: could not start the service automatic updates on local computer»

Update CPU which proved later to be bad. Replaced by original CPU. Re-installed Windows XP Home using a slipstreamed CD that I burned the original non - OEM drive that has Service Pack 2. Integrated Service Pack 3 which I got from the MS. site Everything works well except for Windows Update. The setting seem to be correct in Administrative Tools/Services. The status of the Service is "stopped". When I try to start the automatic updates from Administrative Tools/Services I receive "error 127: the specified procedure could not be found." Also "error 0 x 80240036: could not start the service automatic updates on local computer» Used the range of anti-virus and malware and found nothing. Currently using Avast 7.0.1426. I also used various tools of Fix - It MS nothing helps. Any help would be greatly appreciated. Thank you.

Hello

1. what application or antivirus security suite is installed and your current subscription?

2 Norton (another) or a McAfee application ever installed on this machine?

3. What are the fix applications that you used so far to try to fix this problem?

Try the next method and check if that helps you with the question of the 127 error you receive.

Method 1: Rdding the DLL file by doing the following:

1. Click Start and click Run, in the search box type CMD and press to enter.
2. right click on CMD in the list and click "Run as Administrator".
3. type the following command and press ENTER. Regsvr32 msvcp71.dll
4. close the command prompt window.

Method 2: run the file system (CFS) Checker:

(Note: you need an XP installation disk to start the System File Checker search.)

The SFC command is used to detect and resolve problems with the files on Windows XP and Windows Vista computers. This command allows you to launch the Windows File Protection Service and allows you to analyze all integrity-protected Windows files and replace all problematic files identified.

1. click on start, and in the box to start, search type CMD
2. right click on CMD in the list and click "Run as Administrator"
3. type the following command and press ENTER. Sfc/scannow
4. close the command prompt window.

For more information on scan SFC (System File Checker), please look in the link mentioned below.

http://support.Microsoft.com/kb/310747

I hope this helps.

Why wireless zero configuration service automatically stop and I start it manually?

Original title: wifi Poblem in xp

In Windows Xp wireless zero configuration service automatically stops and I start it manually I want to know why this service stopped automatically help me solve this problem

Hello
1. Did you changes to the computer before the problem occurred?
I suggest you to follow the steps below and check if it helps.

Method 1: How can I disable wireless configuration and enable Windows XP Wireless Auto Configuration services: http://support.microsoft.com/kb/968682

Method 2: Also I suggest that you install the updated drivers for the network adapter on the computer by visiting the manufacturer of the network adapter and verify that it works.

How to manage devices in Windows XP: http://support.microsoft.com/kb/283658

Hope this information is useful.

Automatic restart blue screen

My computer freezes at 2 or 3 times per day and a blue screen flashes up, then my computer restarts.

Here is the error code:

BCCode: 1000000a BCP1: 017F0304 BCP2: 00000002 BCP3: 00000000
BCP4: 804 d 9864 OSVer: 5_1_2600 SP: 3_0 product: 768_1

C:\DOCUME~1\DREYNO~1\Locals~1\Temp\WERcd78.dir00\Mini090610-05.dmp

C:\DOCUME~1\DREYNO~1\Locals~1\Temp\WERcd78.dir00\sysdata. XML

My computer is Sony computer laptop model VGN-A117S bought in 2004 HD 80 GB DDR SDRAM 1 GB with Norton Utiliies connected to the cable Modem

How can I solve this problem?

Thanks in advance for your help

First of all, fix your XP if it does not automatically restart on failure of the blue screen (easier to see), offers more information, the information of the last 5 dumps, run some other scans in addition to Norton...

XP is configured to restart automatically on some system failures, you will need to disable this feature for BSOD information will remain on the screen for you to see.

Configure your system does not automatically restart on system failure (this is what he wants to do):

Right click my computer, properties, advanced, startup and recovery settings.

In the system failure section:

Put a check mark in the box "write an event to the system log.

Put a check mark in the box "send an administrative alert.

Uncheck 'automatically restart '.

In the Write debugging information section select:

Partial dump (64 KB)

Set the directory small dumpster:

%SystemRoot%\Minidump

Click OK, OK.

Restart your computer.

Please provide additional information on your system:

Describe your current antivirus and software anti malware situation: McAfee, Norton, Spybot, AVG, Avira
!, Defender, ZoneAlarm, PC Tools, MSE, Comodo, etc..

Click Start, run and enter in the box:

Msinfo32

Click on OK and when the system info summary appears, click on Edition, select all, copy, and then paste the information here.

There will be some personal information (such as the user name and the name of the system), and anything that turns information private for you, simply delete the pasted information.

For information about video drivers, expand components, click view, click on edit, select all, copy and then paste the information here.

For more audio information, expand components, click on Sound Device, click on edit, select all, copy and then paste the information here.

This will minimize back Q & A and eliminate guesswork.

Download BlueScreenView here:

http://www.NirSoft.NET/utils/blue_screen_view.html

Unzip it and run it (BSV installs nothing) and let him complete the digitization of all of your files to dump.

If you double-click on depressed, you will get information on it (including the field caused by the driver) and you should be able to spot the problem right away - especially if you see a model in landfills where Caused by field pilot is the same (beginning with this driver).

Select (highlight) one or more of the most recent dump files by clicking on them and hold down the CTRL key to select multiple files. Try to select only the most recent links that relate to your problem (perhaps five or six to start dump files).

Click on file, save selected items and save information from the dumps to a text file on your desktop called BSOD.txt. Open BSOD.txt with a text editor, copy the text and paste it in your next reply.

Here's an example of report ASB to a single BSOD I initiated on purpose that indicates the cause of the accident as the pilot i8042prt.sys belonging to Microsoft Corporation:

==================================================

Dump file: Mini062110 - 01.dmp

Crash time: 21/06/2010-11:51:31

Bug Check String: MANUALLY_INITIATED_CRASH

Bug check code: 0x000000e2

Parameter 1: 0x00000000

Parameter 2: 0x00000000

Parameter 3: 0x00000000

Parameter 4: 0x00000000

Caused by the driver: i8042prt.sys

Caused by the address: i8042prt.sys + 27fb

Description of the file: i8042 Port driver

Product name: Microsoft® Windows® Operating System

Company: Microsoft Corporation

File version: 5.1.2600.5512 (xpsp.080413 - 2108)

Processor: 32-bit

Computer name:

Full path: C:\WINDOWS\minidump\Mini062110-01.dmp

==================================================

Send information from 5 last memory dumps.

No matter what you use for protection against malware, please follow these steps:

Download, install, update and do a full scan with these free malware detection programs:

Malwarebytes (MMFA): http://malwarebytes.org/

SUPERAntiSpyware: (SAS): http://www.superantispyware.com/

It can be uninstalled later if you wish.

Do you really think that the suggestions that begin with the words try, maybe , or perhaps will be useful?

I need YOUR voice and the points for helpful answers and propose responses. I'm saving for a pony!

Random freeze and automatic restart

I have a Dell Inspiron 1521 with windows vista that I bought about 2 years ago. Since I got it, it was freezing when loading, either on the screen, the opening of the office, or even in full me work on something load. It also randomly restarts itself without giving me any warning as to what happened. I ran the antivirus scans and that you have installed all updates. nothing seems to solve the problem. Maybe windows vista is to blame; We all know that 2 years after vista came out windows 7 has been created because vista is a GREAT operating system. I have NO idea what to do on my laptop in addition to throw out the window. Any advice would be greatly appreciated!

Thank you!

Hello

After that the foregoing if you always got crashes:

Look in the Event Viewer to see if something is reported on those.
http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
TIP - Options - Advanced filter allows you to see a time instead of all of the file.
http://www.NirSoft.NET/utils/my_event_viewer.html

-------------------------------------------------------------------------
Also this, so you can see the probable bluescreens.

Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
http://www.winvistatips.com/disable-automatic-restart-T84.html

-------------------------------------------------------------------------

Here are a few ways to possibly fix the blue screen issue. If you could give the info from the blue screen that would be
Help. Such as ITC and 4 others entered at the bottom left. And any other information such as STOP error
codes and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

As examples:

BCCode: 116
BCP1: 87BC9510
BCP2: 8C013D80
BCP3: 00000000
BCP4: 00000002

or in this format:

Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

It is an excellent tool for displaying the blue screen error information

BlueScreenView scans all your minidump files created during "blue screen of death," collisions
Displays information on all the "crash" of a table - free
http://www.NirSoft.NET/utils/blue_screen_view.html

BlueScreens many are caused by old or damaged drivers, video drivers in particular, but there are other causes.

You can follow these steps in the Safe Mode if necessary or the command prompt Vista DVD or Options of recovery if your
system installed by the manufacturer.

This tells you how to access the System Recovery Options and/or a Vista DVD
http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

You can try a system restore to a point before the problem started when one exists.

How to make a Vista system restore
http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

-------------------------------------------------------------------------

Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

Enter this at the command prompt - sfc/scannow

How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228

The log can give you the answer if there is a corrupted driver. (Says not all possible driver problems).

Also run CheckDisk, so we cannot exclude as much as possible of the corruption.
How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

-------------------------------------------------------------------------

Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, 3rd party keyboard and
smile, as well as of other major device drivers.

Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

How to install a device driver in Vista Device Manager
http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

How to disable automatic driver Installation in Windows Vista - drivers
http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

-------------------------------------------------------------------------

How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart unexpectedly
http://support.Microsoft.com/kb/958233

Troubleshooting, STOP error blue screen Vista
http://www.chicagotech.NET/Vista/vistabluescreen.htm

Understanding and decoding BSOD (blue screen of death) Messages
http://www.Taranfx.com/blog/?p=692

Windows - troubleshooting blue screen errors
http://KB.wisc.edu/page.php?id=7033

-------------------------------------------------------------------------

In some cases, it may be necessary.

The Options or Vista recovery disk Startup Repair

How to do a startup repair
http://www.Vistax64.com/tutorials/91467-startup-repair.html

This tells you how to access the System Recovery Options and/or a Vista DVD
http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

I hope this helps.
Rob - bicycle - Mark Twain said it is good.

CSAuth Service automatically restart - 2.6 NT

Similar Questions

Maybe you are looking for