CSH: Several elements of the application can point link to a single help topic?

Similar Questions

• Using elements of the application of interactive report filters

  Hello
  
  Can we use elements of application in interactive report filters? If so, how?
  
  Thank you
  Machaan

  Take a look at the creation of a link to the section of interactive reports in the Application Guide of the user for example generator

  This example binds, resets and clears the saved report parameters 12345. It also creates an ENAME = 'KING' filter on saved report 12345.

  f? p = 100: 1: & SESSION. : I have R_REPORT_12345::RIR, CIR::RIR, CIR:IR_ENAME:KING

  If you have an element of the application P1_ENAME the following apply to the example above

  f? p = 100: 1: & SESSION. : I have R_REPORT_12345::RIR, CIR::RIR, CIR:IR_ENAME: & P1_ENAME.

  If you want a permament for all filter saved reports on the value of point of application, it is best to use the: APP_ITEM_NAME bind variables in your SQL syntax, it really depends on how you define the value of your item and how you interact with it. AFAIK does not request point directly bind variables syntax in the filters, IR etc...

• Extract the elements of the application via command line

  Hi all

  I can extract the application of the elements of the option extract-> elements of the application.

  Is it possible that I can automate this command line or any other method

  Thank you

  Kind regards

  TVMK

  Yes, LCM is a command line utility that can be fully automated for these elements of snapshot off. Take a look at the document of LCM

  http://docs.Oracle.com/CD/E17236_01/EPM.1112/epm_lifecycle_management.PDF

  As mentioned, the API is another way too but who can take over installation but doable.

  Thanos also gave some options you could look.

  If the information provided to the clarity/confirmation that you are looking for be sure to close the thread for the other members of the community may be able to find the solution at the appropriate time in the future.

• Define and access the elements of the application

  Hello
  
  How can I set and access the values of the elements of the application of the package? is ' t recommended to access the elements of the procedure?
  
  Thank you

  Hello

  PL/SQL functions or procedures without worrying whether or not they are packed:

  procedure: APEX_UTIL. SET_SESSION_STATE ('MY_ITEM', 'myvalue');

  get the function: V ('MY_ITEM')

  Regards Garry

• Define an element of the application to another application?

  Salvation of the forums,
  
  Is it possible to define a part of the application to another application?
  
  The context:
  We have defined three elements of application in our main application. These items are available in our custom permission: used to determine the context from which the user accesses the page. If the user has access (in light of this context and security defined for the page), the elements are calculated with the values of the current context.
  
  Now we add another application that uses the same permission. We could create items of the application with the same name of this application and pass the context values to the other application every time that the user to navigate from one application to another. The problem is that permission is launched until the values are assigned to the elements (correct me if I'm wrong).
  
  I would like to reuse the same elements of the application (defined in a single application) where the user is. I can access an element of the application to another application (see [this thread | http://forums.oracle.com/forums/thread.jspa?messageID=2453615]), but I have not found a way to define its value. Is this possible?
  
  Thank you
  
  Jeff

  Jeff,

  I'm sure you can't do what you ask (page set the values for item directly in applications).

  You're right about the scripts of authentication and authorization running until the values are assigned to the elements on the page.

  But you might be able to accomplish what you want via a cookie? Write it in the calling application and read in the called application? Maybe it's not the most secure method, but it seems like it would do the job, huh? I think that you would create a process to send the calling application page that creates the cookie and a front of header in the receiving application page that reads and analyzes. Or you could have three different cookies if you don't want to parse the string in a. I think you might want to remove the cookie (s) after reading, so it is unlikely anyone can understand how to hack them.

  Good luck

  Stew

• Receive the error message cannot start the base engine, the application can not continue trying to work with Skype and Intervoip

  Original title: Intervoip and skpye does not work on my computer. When I open the PC screen, cannot start the base engine, the application can not continue. How I have this problem?

  My Intervoip and skpye does not work on my computer. When I opened the PC screens, failed to start the base engine, the application can not continue. How I have this problem?

  Base engine
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/core-engine/a18d491c-25e2-4473-A03B-1f3161c5131b

  Have you tried right clicking on the shortcut to the program or the .exe and select "Run As Administrator"?  Perform, even if your user name is an administrator.

  Try right click on the actual Setup.exe and choosing the option "Run As Administrator"?  Perform, even if your user name is an administrator.

  Two applications load mode safe mode with setting in network or a clean boot?

  Startup options (including safe mode)
  http://Windows.Microsoft.com/en-us/Windows7/advanced-startup-options-including-safe-mode

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/default.aspx/KB/929135

  If you test with another Windows user, have the same problem?

  Try running ChkDsk to check your drive for errors. Right click on your drive icon / properties / tools / error checking.  First try checking not be (read-only) to see if it reports any problems file or hard drive.  If this is the case, start by checking the two boxes, in no other rerun.

• the application could not start because the configuration of the incorrect application of reinstallation of the application can solve the problem by Insalling Vmware tools so that windows server 2003

  the application could not start because the configuration of the incorrect application of reinstallation of the application can solve the problem by Insalling Vmware tools so that windows server 2003. PFA

  Ranjana,

  Please, review the vminst.log file located in % TEMP and see if we could see related errors.  Otherwise follow the troubleshooting steps below;

  1. check that the guest operating system that you want to install VMware Tools is fully certified.

  2. check that the correct guest operating system is selected

  3. check that the good ISO image is loaded. For more information, see ensuring good ISO image VMware tools is loaded (1003910).

  4. check that the VMware Tools ISO image has not been damaged. For more information, see determine if your VMware Tools ISO image is damaged on a host ESX/ESXi (1004820).

  5. If you are installing a Windows operating system, make sure that you do not encounter problems with your Windows registry database. For more information about the resolution of the problems of register with VMware Tools, see Impossible to upgrade the existing VMware tools (1001354).

  6. If you install on a 64-bit Linux guest OS, make sure that there are no missing dependencies. For more information, see Tools from VMware install fails to start the daemon of guest OS on the operating systems 64-bit Linux with the glibc-common package 32-bit installed (1023185).

  If your problem persists, please refer to: KB VMware: VMware Tools installation problems that are defective in a guest operating system or contact support.

  ~ dGeorgey

• Inifile several elements with the same name

  Hello

  I have a file of similar to an ini file setting. I can read with the toolslib inifile.

  A [SPLINE] section has a lot of variable, number, lines all begin with DATA =. The line of these data is read as a string. The content is 3 values as input for a spline interpolation.

  Inifile labwindows Analyzer can read that and he can write it. The number of elements in the section [SPLINE] equals the number of rows of DATA. When he writes, he recreates [SPLINE] section with several items that all as DATA begin =.

  Now I want to read later, each of these DATA items, retrieve the values of three and put them in some tables.

  The ini_get('sendmail_from') functions have as input a sectionname and an itemname. So when I use Ini_GetPointerToString, I always get the first occurrence of this itemname or always the first line.

  How can I get the second and third... String?

  Kind regards, Jos

  I'm using Labwindows CVI 8.0 for Windows

  I use the inifile toolslib\toolbox Analyzer

  Ini_WriteToFile data looks like:

  [ENGINE]
  MOTORNUMBER = 4
  REQUEST = 0 - 25.0 28.0 0.000 1.0 0.0 0.0
  WAVELENGTH = 41 45,000 0.000 0.000 1.0 0.01 1.0
  BANDWIDTH = 42 - 20, 000-25,000 - 24.960 1.0 1.0 0.01
  NAMES = 43 - 6.0 95.0 0.000 1.0 2.0 0.3

  [SPLINE]
  DATA = 240,3, 0.006,-42,0; Zemax * /.
  DATA = 253,7, 5.034,-42.85; High performance Hg100 spectraal lamp * /.
  DATA = 280.4, 12.396,-44.7. High performance Hg100 spectraal lamp * /.
  DATA = 296,8, 15.761,-45.1. High performance Hg100 spectraal lamp * /.
  DATA = 334.2, 21.389,-47.2; High performance Hg100 spectraal lamp * /.
  DATA = 404.7, 27.680,-50.4; High performance Hg100 spectraal lamp * /.

  Hello

  Thanks to you two.

  Because the ini library has been able to export the complete set of data, including multiple DATA key, I had little hope that there is an easy way to use this library. Your comments, it is not useful to look for a work around.

  In the meantime, I found an another iniparser (http://ndevilla.free.fr/iniparser/). It doesn't "support" no double keys, but I can probably it adapt for my application. If not, I'll take a few excerpts from the library labwindows and this second example and have to build my own.

  Kind regards, Jos

• Assignment of an element of the application when an element loses focus

  I'm trying to implement this feature in my APEX application:
  When the user enters a value in a text element loses focus, a RadioGroup on the form should be greyed out.
  But the problem is that I need to access the value of the RadioGroup so that the code which is then executed to work properly, but that the value is therefore more accessible if the RadioGroup is disabled.
  So I thought that if I put the value of the Radio group in an application-level element before I turn it off, the code can access the value.
  But how can I do this? It must arrive at the point where a value is entered in the text element and the focus is lost.
  But, as far as I know, the only thing I can implement at this time there is an onblur statement that calls a Javascript function.
  And I don't think I can assign a value to a javascript application-level item, can I?
  Bottom line: I need a way of executing the command
  : F100_Category: =: P1_Category (where P1_Category is the RadioGroup) - what it does to a place in time.
  Any ideas?

  'FALSE' must be all lowercase as 'false '. Without the quotes are necessary

  CITY

  Published by: City aissaoui on December 10, 2008 11:07

• HFM Calc Manager of rules does not appear through excerpts-> elements of the application

  Dear team,

  We have management rules defined in application consolidation HFM EPMA but during extraction through the workspace using snippets-> Application parts, few of them make their appearance, but not all.

  That's why I wonder that all Manager cal rules are run in the context of Consolidation or not. Please provide steps to check whether or not all the rules of calc manager associated with the application.

  According to my understanding, Manager of calc rules should extract through the workspace using snippets-> elements of Application please confirm if my interpretation is correct or not.

  We are om EMP 11.1.2.3

  Your immediate response is much appreciated.

  Thank you

  Hello. Check in the Calc Manager that the desired rules are rule groups that are marked for deployment. If the rules are not in a set of rules, or rules in some rulesets not marked for deployment, then the rules will be not responsible for HFM.

  Kind regards

  Eric

• Random table and present several elements of the array at the same time

  Hi all

  I figured out how to randomize an array and present the items where the user can scroll through the items one at a time. However, I would like to know how I could go for the presentation of the elements of a random array at the same time. To be concrete, suppose I have a list of three words that is Word 1 and Word 2 Word 3. For each user, I'm looking for present all three words on the screen at the same time, but in a different order. If a person can see it on the screen:

  WORD 1

  WORD 3

  WORD 2

  and someone else could see

  WORD 3

  WORD 2

  WORD 1

  Pointers or guides are appreciated. Thanks for reading.

  You say that you already know how random the table, so I won't go into that. Assume that you already have 3 TextFields on screen and called tf1, tf2 and tf3. You didn't say if you use Classes or script code. I'm not a big fan of code of script in AS3, so I'm not good at writing of examples in there. The example here assumes that the class code. It also assumes

  1. You have ' declare stage instances to automatically "off
  2. TF1, tf2 and tf3 exist in all frames of the timeline of the MC that uses this class.

  public class Words extends MovieClip {
      protected var wordSource:Array;
      public var tf1:TextField;
      public var tf2:TextField;
      public var tf3:TextFiels;
  
      //constructor
      public function Words() {
            super();
            //init your wordSource array here
  
            //a Vector is like an Array, but you're very sure what type of "thing" is at each index.
            //in this case, it's TextFields.
            var tfs:Vetor. = Vector.([tf1, tf2, tf3]);
            //loop through each word and each text field and match them up
            var loops = wordSource.length;
            for (var i=0; i		   

• Several shortcuts to the Applications folder

  Facts:

  -J' had originally installed Windows XP in bootcamp

  -J' imported in VMWare Fusion and deleted the partition boot camp

  Problem:

  -As of late, I'll have several shortcuts for an application in the Package of merger of VMWare (see image)

  -J' even had microsoft Word opens as "Microsoft Word - Windows XP 4.  I don't have a VM installed and a copy of Microsoft Word.

  

  Question:

  Is having multiple instances of an icon agreement?  Is there a way to reset the icons in the folder applications/package?

  Thank you

  Steve

  That's what I would do to try to solve this problem...

  1 stop, suspend, the goal of the Virtual Machine.

  2. uncheck the 'Allow your Mac to open applications in the virtual machine' box sub-applications shared on the sheet of sharing in the settings for the target of the Virtual Machine and then close merger.

  3. now delete the application folder that is in the package of the target Virtual Machine, and then empty the trash.  Note that it is safe to delete the applications folder and support within the whole of the VM of the target, as it will be recreated automatically once the shared Applications settings are set on "allow your Mac to open applications in the machine virtual '.

  4. start the merger and then check the box "Allow your Mac to open applications in the virtual machine", and then start the Virtual Machine to target.

• I've just updated AE CC, and this message appears the application could not start properly (0xc000001d). Help! Help! Help!

  The application failed to start properly (0xc000001d). Click OK to close the application (as below).

  

  And it does not open.

  I have something to make every day, working on 14 feature, and I should be made now. I'm a little frustrated by this.

  
  

  Adobe, please, download a new update out there and fix it, so, I can maintain my work schedule.

  The update of the corrections after effects CC 2015 (13.6.1) is available. It fixes several bugs, including one in discussion on this topic.

  Details: http://adobe.ly/1QqMMc6

  Let us know how things work after installing the update.

• The application could not start error 0xc000007b URGENT HELP PLEASE

  Hi a few weeks a go I started getting an error (The was unable to start correctly 0xc000007b Application error click OK to close the Application)

  and I was looking for a solution since but nothing works and I don't want to reinstall my windows yet I only met the error when you try to start some games I've tried
  The difficulty of Cmd/sfc and I tried to reinstall Microsoft Visual C++ Redistributable Packages 2010 and sp1 and I can't make them work
  Windows 7 Ultimate X 64
  Could you please help me

  Thank you for your help, I tried to completely uninstall Microsoft redistributable and then I just reinstalled directly from microsoft, I think it was a corrupted update which screwed things anyway thanks for your help

• The application requires two 2 clicks to launch help CHM

  I have developed a (popup) online help CHM file for integration in a desktop application. The help does not open when you first click the 'HELP' button in the application. When you click on it a second time, it opens as expected.

  Any thoughts? Thanks in advance for your help.

  If the CHM works as expected, the problem is in the way in which your application invokes help. Your developers will need to consider the question.