CSS does not work in live mode view or f12

Similar Questions

• Windows XP Professional does not work in normal mode. I can't find my Windows CD to repair it but. What are my options?

  Windows xp pro does not work in normal mode.  I can make it work in safe mode.  I can't find my XP cd.  I don't have the serial code and key.  How can I load xp and try to fix the problem.

  Thank you
  Mike

  original title: need windows xp pro

  Hello

  Since it works fine in safe mode, I suggest you to try to perform the audit and the boot if it helps:
  http://support.Microsoft.com/kb/310353

  NOTE: When you are finished troubleshooting, make sure that you reset the computer in start mode normal such as suggested in step 7 of the above article.

  It will be useful.

• Keyboard does not work in safe mode

  Sometimes, when I have a problem the tech asked me to use mode without failure for certain tasks. But my keyboard does not work in safe mode. I am NOT using a USB - I have windows xp service pack 3. How to remedy? blondeagent99

  Sometimes, when I have a problem the tech asked me to use mode without failure for certain tasks. But my keyboard does not work in safe mode. I am NOT using a USB - I have windows xp service pack 3. How to remedy? blondeagent99

  With windows, access device mgr by right click on my computer > properties > Hardware tab > Device Manager button. Locate the keyboard in the list. Right-click on it and select the driver tab choose to uninstall the driver. Now, click on the button to update the driver. See if this will solve the problem.

  Kind regards

  Joel

  Free computer support and diagnostics-->> http://repairbotsonline.forumotion.com/

• My webcam does not work with live chat

  Original title: webcam problem

  my webcam does not work with live chat and it happened last time specially when the computer do the update of rutin and I used to restore my computer to bring it back to the work of the web camera

  Thank you

  Hello

  ·         What is the brand and model of the webcam?

  ·         You're using a built-in or external webcam?

  Method 1:

  Try to run the Microsoft fixit from the link tool and check if it helps.

  Hardware devices do not work or are not detected in Windows

  http://support.Microsoft.com/mats/hardware_device_problems/en-us

  Method 2:

  I suggest updating the drivers of webcam on the manufacturer's Web site, click on the link below:

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

• Get the error, Drivermax does not work in Compatibility Mode

  I installed an updated driver called drivermax, but whenever I try to download the updates, it says does not work in compatibility mode, change back the settings to devices.exe. I don't know what they mean or how to do that, someone has an idea?

  Please make sure that you have installed the latest version of DriverMax, this problem should be solved. Anyway, please contact us at http://www.innovative-sol.com/contact/ and we will do our best to help you.

• footer css does not work

  I add a footer on my page and I want to change the color but his does not work, I created a class of footer, but the background won't change I don't its something simple, but I can't see it here is my code please.

  <! DOCTYPE html >

  < html lang = "en" >

  < head >

  < meta charset = "utf-8" >

  < meta http-equiv = "X-UA-Compatible" content = "IE = edge" >

  < meta name = "viewport" content = "width = device-width, original scale = 1" >

  < name meta = "description" content = "" >

  < name meta = "author" content = "" >

  <!-TemplateBeginEditable name = "doctitle"-->

  < title > my events calendar < / title >

  <! - TemplateEndEditable - >

  " < link rel ="stylesheet"href =" https://MaxCDN.bootstrapcdn.com/font-awesome/4.5.0/CSS/font-awesome.min.CSS ">

  <!-'bootstrap' Core CSS-->

  " < link rel ="stylesheet"href =" http://MaxCDN.bootstrapcdn.com/bootstrap/3.3.5/CSS/bootstrap.min.CSS ">

  <!-Custom-> CSS

  "< link href ="... / CSS/business-casual. CSS"rel ="stylesheet">

  <! - fonts - >

  " < link href =" http://fonts.googleapis.com/CSS?family=open+sans:300italic, 400italic, 600italic, 700italic, 00italic 8, 400, 300, 600, 700, 800 "rel ="stylesheet"type =" text/css"> "

  " < link href =" http://fonts.googleapis.com/css?family=Josefin+Slab:100, 300, 400, 600, 700, 100italic, 300itali c, 400italic, 600italic, 700italic "rel ="stylesheet"type =" text/css"> "

  < div id = 'fb-root' > < / div >

  < script > (function (d, s, id) {})

  var js, SJF = d.getElementsByTagName (s) [0];

  If (d.getElementById (id)) return;

  js = d.createElement (s); js.ID = id;

  js. SRC = "//connect.facebook.net/en_US/sdk.js#xfbml=1 & version = v2.5 & appId = 512896575525133;

  fjs.parentNode.insertBefore (js, SJF);

  (} (document, 'script', 'facebook-jssdk')); < /script >

  <! - HTML5 Shim and Respond.js IE8 takes in charge of HTML5 elements and questions from the media - >

  <!-WARNING: Respond.js does not work if you view the page via file://-->

  <!-[if lt IE 9] >

  " < script src =" https://OSS.MaxCDN.com/libs/html5shiv/3.7.0/html5shiv.js "> < / script > .

  " < script src =" https://OSS.MaxCDN.com/libs/respond.js/1.4.2/respond.min.js "> < / script > .

  <! [endif]-->

  <!-TemplateParam name = "class" type = "text" value = ""-> "

  < / head >

  < class = "@@(_document['class']) body @" >

  < div class = "mark" > my events calendar < / div >

  < div class = "address bar" > < strong > where all your events are a click away < facilities > < / div >

  <! - navigation - >

  < nav class = "navbar, navbar - default" role = "navigation" >

  < div class = "container" >

  <!-brand and toggle get grouped together for better mobile display->

  < div class = "bar navigation-header" >

  < button type = "button" class = 'bar of navigation-toggle' data-toggle = "collapse" data-target="#bs-example-navbar-collapse-1" >

  < span class = "sr only" > toggle navigation </span >

  < span class = 'bar icons' > < / span >

  < span class = 'bar icons' > < / span >

  < span class = 'bar icons' > < / span >

  < / button >

  <!--navbar-brand is hidden on larger screens, but visible when the menu is reduced-->

  "< a class = 'bar of navigation-brand' href ="... / index.html "> my events calendar < /a >"

  < / div >

  <!-collect the nav links, forms, and other content to alternate->

  < div class = "navbar-collapse collapse" id = "bs-example-navbar-collapse-1" >

  < ul class = "navbar-nav nav" >

  < li >

  "< a href ="... / index.html "> home < /a >"

  < /li >

  < li >

  "< a href ="... / calendar.html "> calendar < /a >"

  < /li >

  < li >

  "< a href ="... / events.html "> events < /a >"

  < /li >

  < li >

  "< a href ="... / venues/venues.html "> sites < /a >"

  < /li >

  < li >

  "< a href ="... / registration.php "> feedback < /a >"

  < /li >

  < /ul >

  < / div >

  <!-/ .navbar-collapse->

  < / div >

  <!-/-> .container

  < / nav >

  <!-TemplateBeginEditable name = "EditRegion2"->

  < div class = "container" >

  < / div > <! - TemplateEndEditable - >

  <!-/-> .container

  <>footer

  < div class = "footer" >

  < div class = "row" >

  < div class = "col-lg-12 text-Center" >

  < p > copyright & copy; Your site Web 2014 < /p >

  < / div >

  < / div >

  < / div >

  < / footer >

  <! - jQuery - >

  " < script src =" https://code.jQuery.com/jQuery-1.11.1.min.js "> < / script > .

  <!-'bootstrap' Core JavaScript-->

  " < script src =" http://MaxCDN.bootstrapcdn.com/bootstrap/3.3.5/js/bootstrap.min.js "> < / script > .

  <! - script to activate the carousel - >

  < script >

  $('.carousel').carousel ({}

  range: 5000 //changes speed

  })

  < /script >

  < / body >

  < / html >

  Thanks for the help I got it sorted, I removed my site from the wamp server and installed new ones now thanks again HAPPY NEW YEAR.

  My resulotion of new year is to get this bloody site finished lol

• Android, iPhone does not work (calls phone mode only)

  I just Android where I got a simple application/widget for calls only mode for the night because I need to

  Keep the emergency of grandparents and a few other numbers.

  You just put it up, choose the contacts to include, and it was a simple pressure on the widget at bedtime.

  They said iPhone isn't a similar option? How is that possible?

  I think that you have only Favorites call with no other notifications (can someone clarify?) but I also

  of many favorites for this as a viable option for me.

  Someone said also you can plug headphones during the night and it must allow that phone calls (can someone clarify?)- but

  It's worse than the favorite options because it allows anyone in my contacts list to call.

  So is there an app or an easy way to do this?

  And if not, how BB and Android figure this out and not iPhone?

  We might think of the billions of dollars and great talent could not understand a work around?

  There is no app for this, but do not disturb, that's what you're looking for. It does not work exactly as you describe for the other operating system, but you have a little understanding of how it works for favorites. You can set do not disturb, and it will not have any type of notification. Another option is to prevent anything but calls Favorites, while the other would be to block all calls, but turn on repeated appeals, which would then allow a second call to the same person within 3 minutes to come through. If you do not use your Favorites list because it is too large, then you will need to use repeated calls. If it's important for you, you can return to your Favorites list to see if you could reduce the list to conform to what you want at the times Do not bother or because you want to just family, possibly teach them the capability of repeated calls.

  Back to Apple would go to http://www.apple.com/feedback and click on the box in this area.

• Satellite R10-101: touch screen does not work in tablet mode

  Hello

  I just bought a Satellite R10-101 laptop / tablet.

  The machine didn't come with a stylus, so I'm not sure if the touchscreen works or not.

  When the machine is in tablet mode touch screen is unresponsive to a contact with a finger. I tried a pointing device of a Windows CE handheld that has a touch screen, but it does not work on the touch screen of the R10.

  The touchscreen should be enabled or that I have to get a Toshiba stylus?

  The computer is running Windows XP Tablet Edition. Will I get the same functionally if I update to Windows 7. Material of the R10 is compatible with Win 7?

  Thank you for any help or advice.

  Joe

  Post edited by: Joe Blow

  Hello

  The display panel works as a touch sensitive digitizer screen.
  You need the stylus to use the touch screen in tablet mode.

  I think you can order the stylus lack of authorized partner Toshiba in your country or google for part numbers: P000407550 or P000445420

• ENVY of HP dv6-7300ex Notebook PC: Wi - Fi does not work on battery mode

  Hello

  Good evening everyone,

  I have a problem with connecting Internet using Wi - Fi connection. When I use the battery mode, the internet connection does not work. However, when I plug the cable into electricity, it works very well without any problems. The computer shows me that I am connected to WiFi but when I try to go to some Web sites, it does not work.

  The original operating system is windows 8 and now I've upgraded to windows 10. However, the problems is not in the two operating systems.

  Thank you very much.

  Hello

  Thank you for visiting the HP Forums! A place where you can find solutions for your problems with the help of the community!

  I stumbled upon your post on the laptop and wanted to help you! I looked in your question about your computer problems with WiFi and laptop dv6-7300ex of HP ENVY staying on when the battery mode. Here is a link that shows you how to change options in Figure 19 of the link allowing the hybrid sleep.

  It shows the battery options and you can check what power plan options on this moment, you are. Balanced is always recommended with laptops.

  You can try to use the Windows Update Troubleshooter to fix updates that do not come through Windows 10.  Please restart the laptop twice to make sure that all updates are completed!

  I hope this helps.

  Thank you.

• Restore not working - the option to restore on my machine does not work. I've highlighted the dates. Does not work in safe mode

  Original title: restoration works not

  The weight restoration on my machine does not work. I've highlighted the dates but I get... impossible to restore messages. I tried switching off my virus checker (Norton) but with the same result.

  Some tools Anti Virus 'protect' your system so that they will not allow a restore of the system work properly.
  For example, if you use Norton/Symantec products, you will see a message like this:
  Restoration incomplete. Your computer cannot be restored...
  It is also a popular Symantec problem (well, I'll be polite and call an "undocumented feature"...), they wrote an article about it:
  http://Service1.Symantec.com/support/sharedtech.nsf/pfdocs/2005113009323013
  According to what you use for malware protection, you may need to disable the product temporarily, do the system restore and then turn the products light up again when the system restore is complete.
  Sometimes you need start your system in Mode safe and so that your protection programs are not running, and then do the system restore.

  Tips from Microsoft in some of their articles that if the system restore does not restore your computer, start in Safe Mode, and then run the system restore.

  It works for some configurations.

• Multi-state object does not work in the Office Viewer

  I have problems with a slideshow of image (multi-state object) in a manufactured magazine Adobe DPS.

  When looked at on ipad or android, everything works perfectly. But this does not at all on the Viewer from the office.

  is this a known bug?

  Is there a work around for the next issues?

  

  Here is a link to this question with this question:

  ECO Sustainable Design Office EN 2015: peace in a former tobacco factory

  Kind regards

  Myra

  Myra,

  Office Viewer is old and it is really useful only for the most basic content preview. We have not updated the Viewer from office more than three years. I suggest to use the iPad or Android directly devices to get an overview of your work.

  Neil

• The NIC failover does not work in LBT mode

  Dear community,
  

  
  

  We met a strange behavior in our network environment while testing our new Cisco 4500 switches x 10g. If you have a TCP Session (example JJ | netcat) data transfer between two virtual machines on different host esx failover does not work on the VM receiver if a physical connection fails.

  The test configuration is as follows:

  |    | - 4 - switch 1 vmnic - vmnic 4-|    |

  VM1 | ESX1 |                  | VSS |                    | ESX2 |-VM2

  |    | - 5 - switch 2 vmnic - vmnic 5-|    |

  More details:

  • The switches are configured as a cluster VSS. New version of the software
  • ESX1/2 are running the latest version 5.5
  • The two vmnic is active on a DV-switch in LBT mode
  • Exchanges are configured with "Port based on the physical NIC load."
  • VM1 and VM2 are invited linux, NICS are vmxnet3

  Steps to reproduce:

  1. Beginning listening mode on VM2 (netcat-l Pei 12345 |) JJ = / dev/null)
  2. Start the transfer on VM1 (dd if = / dev/zero bs = 1 M | netcat VM2 12345)
  3. Check which link is used (in my example vmnic5 on ESX2)
  4. Unplug the ESX2 vmnic5

  What you observe:

  • DD-traffic dies immediately
  • If you kill the dd on machines (it does not end by itself) and start all over again, it works immediately
  • If you ping VM1 VM2 or another system, it works
  • If you plugged vmnic5 again once the virtual machine is switched to new vmnic5-> if you didn't kill dd will continue

  Now to test the reverse:

  1. Beginning listening mode on VM2 (netcat-l Pei 12345 |) JJ = / dev/null)
  2. Start the transfer on VM1 (dd if = / dev/zero bs = 1 M | netcat VM2 12345)
  3. Check which link is used (in my example vmnic4 on ESX1)
  4. Disconnect vmnic1 ESX1

  What you observe:

  • Failover works like a charm
  • Failback works like a charm

  Conclusion:

  • Only the virtual machine at the front desk has a problem
  • Only an already established TCP session behaves badly, work of new sessions very well (as does ping, no losses)
  • If you use LACP place LBT on uplink the problem disappeared
  • Same problem if you connect two links to Switch1
  • Same problem if you use a physical box with linux and LACP as system
  • I did the same test with two c3750x (no cluster VSS) and has not encountered the problem

  Any ideas? It's really a good one.

  Thank you!

  Sascha

  
  

  
  

  Update:

  To make it clear, it doesn't have the transmission of UDP.

  Post edited by: sewert1

  I did some further testing and also involved cisco. There is no problem with the switches and network in general.

  Turns out he works with Windows clients, but it does not work with Linux. But it works with Linux with adapters e1000 and e1000e but not with vmxnet3.

  So I did some tests and learned that the vmxnet3 kernel module must be at least version 1.3. Version 1.1 (SLES 11 default) or 1.2 (default SLES12) does not work.

  (./vmware-install.pl--clobber-noyau-modules = vmxnet3)

• Active AF:commandLink: hover &amp; CSS does not work

  Hello
  
  I use JDeveloper 11.1.1.6
  
  My script is required to change the color in < af:commandLink > at this time active. I tried CSS styles below,
  
  + af | commandLink: active {+
  background-color: #7FFFD4.
  +}+
  
  + af | commandLink: hover {+
  background-color: #FFCCFF;
  +}+
  
  But it does not work. I followed this URL http://jdevadf.oracle.com/adf-richclient-demo/faces/components/skinningKeys/commandLink.jspx .

  Hi David,

  Looking for probably

  af|commandLink:link:active
  {
    color: Aqua;
  }
  

  Here are the other selectors

  af|commandLink:active
  af|commandLink:busy
  af|commandLink:disabled
  af|commandLink:hover
  af|commandLink:inline-selectable
  af|commandLink:inline-selected
  af|commandLink:link:active
  af|commandLink:visited
  

  See here: http://jdevadf.oracle.com/adf-richclient-demo/docs/skin-selectors.html

  Kind regards

  Lalit

• Hyperlink does not work in the Adobe Viewer, why?

  Hello world! I create an interactive newsletter in Indesign CS6 for the iPad and iPhone. I have a 3D model I want to demonstrate, but that's the problem. I have a link to the Viewer IPM (the 3D model is there), but when I use this URL does not work. The address begins with: ipm: / /.

  When I press the link in the Adobe viewer it shows: a error 101 Also just to inform that I have on my ipad and iphone viewer IPM.

  I really want to have this link to work. Please help me out! Is there another way to show a 3D model in Indesign?

  Thank you

  VV

  PS Plus early I tried to use the 360 view full of images, but finally the saddest is that it works ONLY horizontally! And that made me very disappointed honestly say.

  Hyperlinks open in the in-app browser, which will not work. Try to create a button, not a hyperlink. In the overlays Panel, set the button to view it in an external browser. See if it works.

• CS6 help does not work in Local mode

  Hello

  I downloaded the demo and installed Mac OS Lion. The request for help does not work; the omly thing that it will display's settings window. After local content downloading and clicking on the fact, the window disappears, but when you click the application icon, it reappears again. In short, I can't display help at all in the aid application, even though I have it set to always use local content. Anyone else run into this?

  THX

  Hi telebutch,

  Sorry for the inconvenience, you face.

  The path on your local computer would be:

  / Users / [user name] /Library/Preferences/chc.4875E02D9FB21EE389F73B8D1702B320485DF8CE.1

  If the folder above does not exist, check if you have more than one medium volume? If so, the directory above can be created on the mount where launches 'Manager Adobe help.

  Another reason why 'Adobe help Manager' keeps popping up that is already active sound the system tray. YOY can "Force quit" the application after you set preferences and try an another invocation of help.

  If nothing works, workaround to stop "Adobe help Manager" to launch whenever you launch help, maybe remove the application from your system. Open "/ Applications/Adobe" in the Finder and place 'Adobe help eat' into the trash. Note that this can also mean that you will not be able to download any help offline - and all the help incovations would need internet connectivity.

  Hope this helps and let us know if you still see issues.

  Kind regards

  Sandeep