CUE with SRST

Similar Questions

• Can CUE with CCM on CME license?

  I have a TRACKING system, which is available for the call (not expresss) Manager.

  I installed on an ISR 2811, CCME 4.0 running IOS 12.4.7, NM-CUE and made the LANDMARK CLI initial setup to configure NTP, clock system, etc.

  When I start the setup Web CUE Wizard, it asks jtapi / ccm info, I do not have, because I want to use it with my BOYFRIEND.

  With the license, I.

  1. is it possible to run it on CME rather than CCM?

  If not, then

  2. can I manually create the CUE CLI users and simply create a dial peer in the CME to route calls to voicemail in CUE?

  I don't care if MWI does not work.

  As far as I know, the only relationship in CUE with CCM or CCME is import original user and perhaps MWI.

  Is there another type of interaction that makes CUE controlled by CCM differs from the CMF?

  Thank you

  Fix. In my view, that the cost is based on the number of mailboxes, not the type of integration. And Yes, the downloads are based on the honor system.

• SHIFT and location CUE - errueur

  Hello to all

  When the location of SHIFT of the CUE with CCA 1.91 I have the following error:

  Impossible to retrieve data from version CUE.

  What to do to make this work?

  Thanks for your help

  Hello

  You're trying to make the complete update of the system or only CUE?

  Do you have a screenshot to give us?

  Have you tried CCA 2.0?

  Amandine

• SD card to Clip Zip?

  Hi all

  I'm new to the forum so please excuse my ignorance.

  Already, I have a 4G & 8 G Fuze (original version) and am ready to order a ClipZip G 4 after reviewing the xcomments here.  I want also to buy an SD card with the ClipZip that we hope will work on my other rockets, but does not know who's in charge.  I saw something about 16G max recommended by Sansa? (I use the players well enough for audio books).

  I see the 16G and 32 G Scandisk Ultra Micro SD cards on Amazon and they come with an adapter.  What should I order?

  Not sure that the drill is, but I have that reason to suppose that the adapter is to connect the card on a computer, but the card fits directly into the "rocket"?

  I also assume that you download a digital audio book to your computer, using Overdrive Media Console 'transfer it"la carte which in turn, is connected to the drive?

  Thank you for advice or explanations,

  Skipjack

  Of course, 18 was a typo, and as I said, my info came from the manufacturer.

  I ordered the 16 G Level 4, which is more that enough space for audio books, I'll be uploading. Between my 4G and 8G rockets, 2 iPod nano, more a Shuffe G 1 exercise music I'm not likely to run out of space.

  My problem is that iPods are really ugly audio books - you can't tell where you are and if you lose your place, it can take forever to find him.  It's worse on the 6th generation 4th and two are hard to cue with overly sensitive controls.

• New software download for WRT54GS

  Hey all. I use a Linksys WRT54GS v 7.2 router model number. Currently it works fine but I have to reformat my hard drive soon and we have lost the CD that we used to install the drivers.

  I was in the downloads section of this site and downloaded the drivers, but it came in a file in .bin format. I tried to run with Daemon Tools, but there was no file cue with him so it didn't work. I tried to make a cue file, and it still does not work. I wanted to test to make sure that it works once I reformatted.

  How can I get this software again? If the .bin file is what I need, how can we get to reinstall what I need?

  Thanks a bunch!

  Well, since nothing else has been changed... Yes just plug into it like you had and go.  However, if this does not work, you will need to configure it from scratch.  You can download the manual from the site of Linksys or go here to start.  This will get your wired connection going.  However, you need to check your computer's wireless.  Now you need for the wireless network adapter drivers that are available from the manufacturer of the computer.

• 7900 and inherited on 10.5 CUCM gateway telephone support

  Hello

  My client is the migration of CUCM 7.1.5 until 10.5 CUCM. In my view, that a direct upgrade is possible. They have several 7911, 7941 and 7921 phones running on CUCM 7. They will build on CUCM 10.5? In addition, there voice gateways are 2811 and 3825 routers running IOS ip voice and spservices 124. These inherited gateways are supported in CUCM10.5. They function as gateways H323 and MGCP with SRST 1 gateway. I do need to update their IOS 15

  Thank you
  Derek

  Hi Derek,.

  7941 is fully compatible with 10.5 CUCM, 7911/21 can still be used with version 10.5, although there is no minimum firmware recommended for the same. 28XX and 3825 gateways, minimum 15.1 (4) IOS M7 is '' recommended '', no matter what lower firmware also works, but you can't get the other bug fixes and features of the new IOS with new version of cucm. Please see the following link for more details

  http://www.Cisco.com/c/en/us/TD/docs/voice_ip_comm/uc_system/unified/com...

  HTH

  Manish

• VoIP decentralized vs centralized Design

  We have a seat with about 200 stores remote location.  We try to deploy voip for the company.  Remote store locations, we have 2900 routers.  Some of the stores are about 200 miles.

  Option 1:

  Deployment of voip and have a centralized call manager.  In this scenario, all the phones in all the stores would record with call handlers at Headquarters with srst.

  Option 2:

  Having phones save locally with their respective routers in the store, but have all the features such as DNs, voicemail, CS and partitions configured centralized at Headquarters?  Is this possible?

  What is the best option for the scenario described above 1 or 2?

  Thank you.

  Well, it comes down to how stable is the network EXPANDED, the bandwidth is a QoS option, etc. My strong preference would always be to centralize as much as possible to facilitate the administration, its ease of integration between sites, plan building numbering, streamlined future updates, etc.. Other migh have a different point of view, but I have deployed successfully much, centralized environment a lot over the past years.

  My 2 cents.

  HTH,

  Chris

• Excerpt from the ASO

  Hi all
  I want to extract one-dimensional ASO cue with 3 children of Lake all about. Anyone can suggest what is the best way to extract it through report script or MDX or Maxl or is there a better way to do it?

  not sure what 3 LAKE is, but look at the outline of applied olap Extractor. This is a free tool to extract dimensions in different formats. You can also make a MAxL command to export a dimension in a file XML format, but hou must be on the 11.1.2.1 version or higher (maybe 11.1.2.0)

• iPhone 6, with toggle Bluetooth XM cadillac cue when I open Facebook or Soundhound

  iPhone 6, with, after the last software update is the strangest thing. When combined with 2015 Cadillac Cue, but listen to XM, when I open Facebook or Soundhound, the queue goes to Bluetooth. I uninstalled and reinstalled apps, not matched and re-pair of phone, no change. Apple support has never had either this complaint, the Cadillac dealer.

  I have the same problem as well. Also experience when a phone call comes, or navigation speak a command. When the function is complete, the bluetooth lights and my iTunes music begins to play, no matter what was playing before.

  all solutions are welcome as this is very frustrating!

• No Audio with call transfer to the CUE Script

  Hello

  I have a CUE script set up to dial several extensions and transfer them to a conference MeetMe hosted on the same 2911 router where the CUE ISM is installed. The call flow is:

  CUCM 2911 <---> <--->CUE

  with calls to the script being initiated by phones registered with the CUCM.

  Dial the pilot script, calls to the specified extensions are undertaken and transferred to the DN MeetMe (7070) successfully, but there is no sound on calls. The script seems to complete successfully as well, because all of the extensions as well as the original one is transferred to the DN MeetMe. The command "display the compact active voice call" shows all participants connected to 7070 and the output of 'see the ephone-dn conf' displays the number of active sessions to 7070

  Direct calls to the DN MeetMe (without going through the script) work very well.

  Logging in the atrace.log seems to show that reactivate the QUEUE calls will fail. I tested with all three SIP call transfer methods CUE without result.

  CUE and 2911 configs as well as the atrace.log CUE file is attached.

  Any ideas would be very appreciated.

  Hi Miroslav,

  You can check the method of transfer in CUE - please define Bye-also and without h450 service of voip telephony services in the CME.

  HTH,

  Alex

• SRST with + E164, sign + num - exp works only with

  Hello

  We'are deployment CUCM8.6.2 with + E164 dialplan and multiple gateways SRST. We are in version IOS T. 15.2 (3)

  Phones get properly registered with their full + E164 extension during the transition to the SRST mode but we would like to implement for inter site composition as in CUCM jacquard translation of 4 digits.

  We tried the num - exp command:

  NUM - exp 3... + 04100013...

  but in the command "Display the number of dial plan", we can see that the + sign is stripped and the prefix not as you wish.

  We tried to escape the character and so one...

  but nothing works!

  Thank you for your

  Help

  Kind regards

  Christophe

  The way I did is to apply a transformation on the ephone-dn model profile or call-manager-rescue as well as the inbound POTS dial-peer. This has the advantage of consuming less dial-peers similar to how CUCM has only the real DN in E.164 format.

  http://www.Cisco.com/en/us/Tech/tk652/tk90/technologies_configuration_example09186a00803f818a.shtml#con10b

  Please remember useful frequency responses and identify useful or correct answers.

• Migration UC520 to CME and CUE 7.03 with CCA 2.1

  Hello

  I have a UC520 at the stepfather in a doctor's office that works fine with unity and B - ACD (file call center) functions. I'm still with the IOS of March 2008 (3.0.3 for CUE for example).

  Is it possible through CCA 2.1 and new packages 7.03 to migrate without having specific worries or not? -What some have already experienced? Now everything works perfectly, I just wanted to do an update to follow the normal evolution of the product. Or as I have time in the next week...

  Thanks for the tips.

  Kind regards

  PO

  Hello

  Do not remove the compact flash hot!

  1st option:

  -The configuration of CME is to recover in CLI:

  UC520 > activate

  UC520 # copy run flash: backupCME.txt

  Pour create a backup response backupCME.txt

  UC520 # copy tftp flash: backupCME.txt

  pour to send this file to a server TFTP (for example your PC)

  -The configuration of CUE is to recover the (Basic http://10.1.10.1) WEB interface.

  2nd option:

  Look at the backup features present in CCA.

  Actually, don't forget to pick up any info type automatic standard script...

  Good migration

  CDT,

  Amandine

• a loop with cue points, round 2

  OK, so I've done it before, and it worked.  It should be as simple as copying the code and rename the FLV Player, but I get an error "invalid seek.  As I said, it worked on previous sites, I did, if any explanation would be great.  I'm trying to get a video replay and then looped around the middle of the video and play at the end in a loop continues.   The only difference I see is that on my other site, it is live from my ftp.  This should not make a difference, as apposed to be local, does?  I also use embedded cue points.  Thanks again.  Here is the code:

  Stop();

  Import fl.video.MetadataEvent;

  Movie.addEventListener (MetadataEvent.CUE_POINT, loopFunction);

  function loopFunction(e:MetadataEvent):void {}

  If {(e.info.name=="introEnd)"}

  Movie.seekToNavCuePoint ("introMiddle");

  Movie.Play ();

  }

  }

  Draw your cuepoints to confirm there is a named introMiddle

• video with actionscript cue points

  Hello! I'm trying to put in place an array of landmarks and when each cue point is reached, it raises an event. I have the updated table in place, but I'm wrong configure action events.

  Any help is VERY appreciated!

  Here's the code so far:

  Import fl.video.MetadataEvent;

  flvPlayback.addEventListener (MetadataEvent.CUE_POINT, onCuePoint);

  flvPlayback.play ("final.flv");

  aCues var = new Array ();

  aCues = [{time: 14, name: "part1"}, {time: 1, name: "part2"}, {time: 3.66, name: 'part3'}, {time: 9.43, name: "part4"}];

  for each (var q in aCues)

  {

  flvPlayback.addASCuePoint (q.time, q.name);

  }

  This is the part that doesn't work

  function onCuePoint (evt:MetadataEvent): void

  {

  if (evt.name = "part1") {}

  part1.gotoAndPlay (2);

  }

  }

  MetadataEvent has the property of information. Try:

  function onCuePoint(evt:MetadataEvent):void
  {
       if (evt.info.name = "part1"){
            part1.gotoAndPlay(2);
       }
  }
  

  Or even better:

  function onCuePoint(evt:MetadataEvent):void
  {
       switch(evt.info.name) {
            case "part1":
                 part1.gotoAndPlay(2);
            break;
  
            case "part2":
                 // do whatever
            break;
  
            case "part3":
                 // do whatever
            break;
  
            case "part3":
                 // do whatever
            break;
       }
  }
  

• help with a lazy slow macbook pro

  Hi, I was wondering if someone with a good understanding of the EtreCheck might be able to help me with my old powerbook, rusty.

  Here is the report copied and pasted from the EtreCheck diagnosis that I just ran (lots of red type):

  Thank you!

  EtreCheck version: 2.9.13 (267)

  Report generated 2016-07-30 19:29

  Download EtreCheck from https://etrecheck.com

  Time 09:23

  Performance: Below average

  Click the [Support] links to help with non-Apple products.

  Click [details] for more information on this line.

  Verify the signatures of Apple: enabled

  Problem: Beachballing

  Hardware Information: ⓘ

  MacBook Pro (15-inch, mid 2009)

  [Data sheet] - [User Guide] - [warranty & Service]

  MacBook Pro - model: MacBookPro5, 3

  1 3.06 GHz Intel Core 2 Duo CPU: 2 strands

  8 GB of RAM expandable - [Instructions]

  BANK 0/DIMM0

  OK 4 GB DDR3 1067 MHz

  BANK 1/DIMM0

  OK 4 GB DDR3 1067 MHz

  Bluetooth: Old - transfer/Airdrop2 not supported

  Wireless: en1: 802.11 a/b/g/n

  Battery: Health = Normal - Cycle count = 342

  Video information: ⓘ

  NVIDIA GeForce 9400M - VRAM: 256 MB

  Color LCD 1440 x 900

  Cinema HD Display 1920 x 1200

  NVIDIA GeForce 9600M GT - VRAM: 512 MB

  Software: ⓘ

  OS X El Capitan 10.11.6 15G (31) - since the start time: about 3 days

  Disc information: ⓘ

  ST9500420ASG disk0: (500,11 GB) (rotation)

  EFI (disk0s1) < not mounted >: 210 MB

  ShiftySeven II (disk0s2) /: 499,25 GB (56,75 GB free)

  Recovery HD (disk0s3) < not mounted > [recovery]: 650 MB

  MATSHITADVD-R UJ-868)

  USB information: ⓘ

  Built-in ISight from Apple Inc..

  Hub keyboard Apple, Inc.

  Apple, Inc. Apple Keyboard

  Card reader Apple

  Apple Inc. Apple keyboard / Trackpad

  Computer, Inc. Apple IR receiver.

  Apple Inc. BRCM2046 hub.

  Apple Inc. Bluetooth USB host controller.

  Guardian: ⓘ

  Mac App Store and identified developers

  Kernel extensions: ⓘ

  /Applications/AirParrot.app

  com.squirrels.airparrot.framebuffer [no charge] (1.4 - SDK 10.8 - 2014-04-19) [Support]

  / Applications/Caplio Mounter.app

  [no charge] jp.co.ricoh.kext.caplio - 10.3 (4.0 - 2008-11-21) [Support]

  [no charge] jp.co.ricoh.kext.caplio - 10.4 (4.0 - 2008-11-21) [Support]

  DiskWarrior.app

  com.alsoft.Preview [no charge] (4.1 - 2007-12-31) [Support]

  / Service.app incompatible software/Parallels

  com.parallels.kext.prl_hid_hook [no charge] (4.0 3844.408728 - 2012-12-27) [Support]

  com.parallels.kext.prl_hypervisor [no charge] (4.0 3844.408728 - 2012-12-27) [Support]

  com.parallels.kext.prl_netbridge [no charge] (4.0 3844.408728 - 2012-12-27) [Support]

  com.parallels.kext.prl_usb_connect [no charge] (4.0 3844.408728 - 2012-12-27) [Support]

  com.parallels.kext.prl_vnic [no charge] (4.0 3844.408728 - 2012-12-27) [Support]

  / Library/Application Support/Avast/components/fileshield/not signed

  [loading] com.avast.AvastFileShield (3.0.0 - SDK 10.10 - 2016-07-21) [Support]

  / Library/Application Support/Avast/components/proxy/not signed

  [loading] com.avast.PacketForwarder (2.1 - SDK 10.10 - 2016-07-21) [Support]

  / Library/Extensions

  [loading] com.squirrels.driver.AirParrotSpeakers (1.8 - SDK 10.8 - 2016-07-26) [Support]

  [loading] net.telestream.driver.TelestreamAudio (1.1.1 - SDK 10.8 - 2016-07-26) [Support]

  / System/Library/Extensions

  [no charge] com.beceem.BeceemAppleWiMAXAdapter (5.2.56d16 - 2016-07-26) [Support]

  com.devguru.driver.DIFMCDFree [no charge] (1.1.0 - 2016-07-26) [Support]

  com.devguru.driver.DIFMSerial [no charge] (1.1.0 - 2016-07-26) [Support]

  com.fklt.driver [no charge] (1.8.0 - 2016-07-26) [Support]

  [no charge] com.novatelwireless.driver.3G (v2.2.8 (3)-2016-07-26) [Support]

  com.novatelwireless.driver.DisableAutoInstall [no charge] (1.2 - 2016-07-26) [Support]

  [no charge] com.sierrawireless.driver.SierraDevSupport (2.0.6.0 - 2016-07-26) [Support]

  [no charge] com.sierrawireless.driver.SierraFSCSupport (2.0.6.0 - 2016-07-26) [Support]

  /System/Library/Extensions/NovatelWireless3G.kext/contents/plugins

  [no charge] com.novatelwireless.driver.3GData (v2.2.8 (3)-2011-11-05) [Support]

  Startup items: ⓘ

  ParallelsDesktopTransporter: Path: / Library/StartupItems/ParallelsDesktopTransporter

  Startup items are obsolete in OS X Yosemite

  Launch system officers: ⓘ

  [operation] com.apple.Finder.plist (2016-02-19) -invalid signature!

  [loading] com.apple.FollowUpUI.plist (2016-02-11) -invalid signature!

  [loading] com.apple.ScreenReaderUIServer.plist (2016-02-16) -invalid signature!

  [loading] com.apple.powerchime.plist (2016-02-22) -invalid signature!

  [loading] com.apple.quicklook.32bit.plist (2016-02-04) -invalid signature!

  [operation] com.apple.quicklook.plist (2016-02-04) -invalid signature!

  [loading] com.apple.quicklook.ui.helper.plist (2016-02-04) -invalid signature!

  [loaded] 9 tasks Apple

  [loading] 149 tasks Apple

  [operation] 64 tasks Apple

  [killed] 16 tasks Apple

  16 killed processes lack of RAM

  Launch system demons: ⓘ

  [loaded] 45 tasks Apple

  [loading] 153 tasks Apple

  [operation] 78 tasks Apple

  [killed] 14 tasks Apple

  14 killed process lack of RAM

  Launch officers: ⓘ

  [no charge] com.adobe.AAM.Updater - 1.0.plist (2016-06-14) [Support]

  [failure] com.adobe.ARMDCHelper.cc24aef4a1b90ed56a... plist (2016-07-13) [Support]

  [failure] com.adobe.AdobeCreativeCloud.plist (2016-04-27) [Support]

  [loading] com.adobe.CS5ServiceManager.plist (2010-06-17) [Support]

  [operation] com.avast.secureline.update - agent.plist (2016-06-29) [Support]

  [loading] com.avast.secureline.userinit.plist (2016-06-29) [Support]

  [operation] com.avast.update - agent.plist (2016-07-22) [Support]

  [loading] com.avast.userinit.plist (2016-07-22) [Support]

  [operation] com.brother.LOGINserver.plist (2013-10-06) [Support]

  [no charge] com.oracle.java.Java - Updater.plist [Support]

  com.TeamViewer.TeamViewer.plist [no charge] (2016-02-14) [Support]

  com.TeamViewer.teamviewer_desktop.plist [no charge] (2016-02-14) [Support]

  Launch demons: ⓘ

  [loading] com.adobe.ARMDC.Communicator.plist (2016-07-13) [Support]

  [loading] com.adobe.ARMDC.SMJobBlessHelper.plist (2016-07-13) [Support]

  [loading] com.adobe.SwitchBoard.plist (2011-12-14) [Support]

  [loading] com.adobe.agsservice.plist (2015-11-02) [Support]

  [failure] com.adobe.fpsaud.plist (2016-05-09) [Support]

  com.adobe.versioncueCS3.plist [loading] (2008-06-22) [Support]

  [loading] com.avast.init.plist (2016-07-22) [Support]

  [loading] com.avast.secureline.init.plist (2016-06-29) [Support]

  [loading] com.avast.secureline.uninstall.plist (2016-06-29) [Support]

  [loading] com.avast.secureline.update.plist (2016-06-29) [Support]

  [loading] com.avast.uninstall.plist (2016-07-22) [Support]

  [loading] com.avast.update.plist (2016-07-22) [Support]

  [loading] com.microsoft.office.licensing.helper.plist (2011-03-10) [Support]

  [loading] com.oracle.JavaInstallHelper.plist (2016-04-21) [Support]

  [no charge] com.oracle.java.Helper - Tool.plist [Support]

  [loading] com.roamingclient.cell.mac.roamingclient.plist (2011-11-05) [Support]

  [loading] com.rogueamoeba.instanton - agent.plist (2016-06-23) [Support]

  [operation] com.sierrawireless.SWoCMon.plist (2010-05-20) [Support]

  com.sierrawireless.SierraReset.plist [no charge] (2010-05-20) [Support]

  [loading] com.teamviewer.Helper.plist (2015-09-29) [Support]

  com.TeamViewer.teamviewer_service.plist [no charge] (2016-02-14) [Support]

  User launch officers: ⓘ

  [loading] com.adobe.AAM.Updater - 1.0.plist (2010-06-28) [Support]

  [failure] com.adobe.ARM. [...]. plist (2010-06-22) [Support]

  [failure] com.adobe.ARM. [...]. plist (2009-10-26) [Support]

  [failure] com.adobe.ARM. [...]. plist (2011-12-15) [Support]

  [operation] com.amazon.music.plist (2014-10-18) [Support]

  [failure] com.apple.MobileMeSyncClientAgent.plist (2011-06-14) -/System/Library/PrivateFrameworks/DotMacSyncManager.framework/Resources/mobilem esyncclient: Executable not found!

  [failure] com.apple.SafariBookmarksSyncer.plist (2009-09-14) -/Applications/Safari.app/Contents/SafariSyncClient.app/Contents/MacOS/SafariSyn customer: Executable not found!

  [loading] com.avast.home.userinit.plist (2016-07-22) [Support]

  [loading] com.avast.secureline.home.userinit.plist (2016-06-29) [Support]

  [loading] com.google.keystone.agent.plist (2016-07-11) [Support]

  [operation] com.spotify.webhelper.plist (2015-05-30) [Support]

  info.lokiware.attachmenttamer.cleanup.plist [no charge] (2013-01-07) [Support]

  [failure] info.lokiware.attachmenttamer.setupagent.plist (06-01-2013) [Support]

  Items in user login: ⓘ

  iTunesHelper Application (/ Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)

  Dropbox application (/ Applications/Dropbox.app)

  Application of Google Reader (Google Drive.app/Applications /)

  Hidden AdobeResourceSynchronizer Application (/ Applications/Adobe Acrobat DC/Adobe Acrobat.app/Contents/Helpers/AdobeResourceSynchronizer.app)

  Garmin Express Service application (/ Applications/Garmin Express.app/Contents/Library/LoginItems/Garmin Express Service.app)

  Request for EvernoteHelper (/ Applications/Evernote.app/Contents/Library/LoginItems/EvernoteHelper.app)

  Other applications: ⓘ

  [ongoing] com.adobe.CCLibrary.166112

  com.apple.BKAgentService [killed]

  com.apple.MailServiceAgent [loading]

  com.Apple.mail.80352 [loading]

  com.avast.account [loading]

  [ongoing] com.avast.daemon

  [ongoing] com.avast.FileShield

  [ongoing] com.avast.helper

  [ongoing] com.avast.proxy

  com.avast.secureline.Burger [loading]

  [ongoing] com.avast.secureline.service

  [ongoing] com.avast.service

  [ongoing] com.brother.utility.NETserver.157792

  [ongoing] com.brother.utility.USBserver.137312

  [ongoing] com.evernote.EvernoteHelper.66912

  [ongoing] com.Garmin.Renu.service.3552

  [ongoing] com.getdropbox.dropbox.134752

  [loading] 421 tasks Apple

  [operation] 184 tasks Apple

  [killed] 33 tasks Apple

  Plug-ins Internet: ⓘ

  DirectorShockwave: 11.6.6r636 (2012-08-09) [Support]

  Unity Web Player: UnityPlayer version 4.1.3f3 (2013-05-30) [Support]

  Default browser: 601 - SDK 10.11 (2016-07-26)

  Flip4Mac WMV Plugin: 2.3.8.1 (2011-01-13) [Support]

  AdobeAAMDetect: 3.0.0.0 - SDK 10.9 (2016-04-27) [Support]

  FlashPlayer - 10.6: 21.0.0.242 - SDK 10.6 (2016-05-13) [Support]

  AdobePDFViewerNPAPI: 15.017.20050 - SDK 10.11 (2016-07-13) [Support]

  Silverlight: 5.1.50428.0 - SDK 10.6 (2016-07-10) [Support]

  QuickTime Plugin: 7.7.3 (2016-07-26)

  Flash Player: 21.0.0.242 - SDK 10.6 (2016-05-13) obsolete! Update

  iPhotoPhotocast: 7.0 - 10.8 SDK (2013-04-30)

  NP_2020Player_IKEA: 5.0.93.0 - SDK 10.6 (2011-10-03) [Support]

  AdobePDFViewer: 15.017.20050 - SDK 10.11 (2016-07-13) [Support]

  GarminGpsControl: 4.0.2.6 Beta - SDK 10.6 (2012-09-11) [Support]

  SharePointBrowserPlugin: 14.6.6 - SDK 10.6 (2016-07-25) [Support]

  JavaAppletPlugin: 15.0.1 - 10.7 (2016-05-04) check the version of the SDK

  User Plug-ins internet: ⓘ

  WebEx: 1.0 (2010-04-06) [Support]

  Safari extensions: ⓘ

  AdBlock - BetaFish, Inc. - https://getadblock.com (2016-07-30)

  DuckDuckGo - DuckDuckGo - http://duckduckgo.com (2015-07-11)

  Save on Pocket - Read It Later, Inc. - http://getpocket.com/ (2015-11-07)

  3rd party preference panes: ⓘ

  Adobe Version Cue CS3 (2008-06-22) [Support]

  Flash Player (2016-05-09) [Support]

  Flip4Mac WMV (2011-01-13) [Support]

  Growl (2013-12-20) [Support]

  MacFUSE (2008-12-19) [Support]

  Time Machine: ⓘ

  Skip system files: No.

  Automatic backup: YES

  Volumes to back up:

  ShiftySeven II: Disc size: 499,25 GB disc used: 442,50 GB

  Destinations:

  Toshiba Time Machine [Local]

  Total size: 999,86 GB

  Total number of backups: 40

  An older backup: 23/04/15, 16:45

  Last backup: 25/07/16, 20:34

  Backup disk size: too small

  Backup size GB 999,86 < (disc 442,50 GB X 3)

  Top of page process CPU: ⓘ

  11% NotificationCenter

  iTunes 11%

  5% WindowServer

  5% coreaudiod

  3% kernel_task

  Top of page process of memory: ⓘ

  919 MB kernel_task

  688 MB com.apple.WebKit.WebContent (4)

  Mdworker (13) 238 MB

  Safari of 205 MB

  Mds_stores 156 MB

  Virtual memory information: ⓘ

  131 MB free RAM

  8.12 used GB RAM (4.05 GB being cached)

  176 MB used Swap

  Diagnostic information: ⓘ

  July 30, 2016, 18:49:37 ~/Library/Logs/DiagnosticReports/Install_2016-07-30-184937_[redacted].crash

  com.adobe.Install - Applications/Utilities/Adobe Creative Cloud / * / Creative Installer.app/Contents/MacOS/Install Cloud

  July 27, 2016, 16:21:32 /Library/Logs/DiagnosticReports/Kernel_2016-07-27-162132_[redacted].panic [details]

  July 27, 2016, 16:18:59 /Library/Logs/DiagnosticReports/Kernel_2016-07-27-161859_[redacted].panic [details]

  Uninstall Avast. It's a worthless scam that don't do anything useful. The only thing it does is a lot more then what it claims, that he you will protect from.