Current font in Labview

Similar Questions

• I am trying to remove a price in pdf format, and a message appears "all or part of the selection has no available police." Cannot add or delete the current font using". I downloaded this font in my Adobe fonts, but still no luck.

  I am trying to remove a price in pdf format, and a message appears "all or part of the selection has no available police." Cannot add or delete the current font using". I downloaded this font in my Adobe fonts, but still no luck.

  How to update or download all the fonts in my Adobe Adobe Acrobat X Pro?

  Get the police does not always help, but to use a font you don't add it to Acrobat. Add you on Mac or Windows.

• Menu fonts in LabVIEW 8.6

  I have problem with menu, of Greek characters in LabVIEW 8.6.

  I installed the patch to take care of other languages, and everything good in the development environment.

  But to exe (executable), Greek characters in menu cannot be displayed. To the front of the exe, they are ok.

  Any suggestions?

  Open your file labview.ini with notepad (it's the pure text). Copy the fonts settings in labview.ini file in the same directory as the exe file. You can find more pointers in this thread-> http://forums.ni.com/ni/board/message?board.id=170&message.id=384369#M384369

• What are the current versions of Labview and Teststand

  Hello

  I currently am downlading the current versions of teststand and labview for evaluation.

  The Teststand-link I saw that it is called "Teststand" 2012.

  1 but there is no version information in the Labview download. Is also 2012 version?

  2 is the two 32-bit-software things?

  3. After installing the evaluation-downloads - can they be activated with a key, or what I need to install again when the CDs arrive in my office?

  Thanks for help

  Iliale wrote:

  Thx for the links.

  I am using Windows 7 64 bit - I'd rather then also Labview 64? (Links to download NOT only provides 32-bit for download)

  There will be problems with my existing 8, 5 - screw Labview conversion to the new Labview2012?

  Thank you

  You can have as many 32-bit and 64-bit installed.  Don't forget your target when you generate an exe file.  64-bit compiled programs can run on 64-bit computers.

  You should have no problem upgrade your code of 8.5.

• Change the default font for LabVIEW front style

  For some reason, my IDE did my front italicized by default policy. When I add a new indicator of control /, / add a stand-alone commentary, I have italics.

  I don't know how it happened, or how to cancel it. Help, please? (With the help of LabVIEW 2013 SP1)

  Gah, as soon as I make a forum post, I found the answer:

  If I open the font dialog (Ctrl + 0) without any selected text, I get a dialog box "Panel by default are". Which allows me to set the default value. I must have accidentally used it when trying to format a front panel.

• Different current on a Labview waveform chart, as well as a current time zone time

  Hello

  I'm sorry. How can I display the current time on a chart similar to a zone Labview waveform current possibly. (See attached)

  Best regards

  Akram

  Hey, Akram,.

  Is what I would like to delete table of clusters, that you changed, it's the entrance to the property map of marked waveform history node. Right click on the entry in the history, then create a constant (do not change this! As it initializes the array). Then there is another node in the property map of waveform with the "x scale shift" and "multiplier to x scale" in the loop, these both have constant wired for them, if you want to change the time or date of the waveform card, then you must change the values of constant '1' you can do it by changing the constant values and by running the code or by modifying one of the constants controls and change during execution. The code you wrote should work. I copied a screenshot of the code please take a look before you continue.

• Incorrect fonts after LabView installation on new computer

  I just got a new computer and installed LabView 2010 (same version as on my old computer).

  On the new computer, it seems that all the fonts, on the front panels and block diagrams, are too big. See the attached images of VI even open on both computers. My old computer is running Windows XP and the new Windows 7 computer.

  What could be? It would be a lot of work for me to manually fix the fonts.

  

  If you don't set a specific font for your group, the "application font" used by LabVIEW is all that is defined for the windows theme.

  Obviously, the two machines stand out here.

  I agree that the fonts are one of the weakest points of LabVIEW, so if you feel the same way, voting for a few related ideas:

  • Persistent policies settings
  • A better way to specify fonts (default)

• How to get current USB in Labview

  Using the Windows Device Manager and selecting the USB HUB, you are able to see the current consumption of your USB devices.

  See attached picture.

  Is it possible to get this value programmatically using Windows DLL calls in Labview or Labview property?

  Thank you

  You can see what the unit is ESTIMATED to consume.  This is not a value of actual consumption.

  It is possible to achieve this programmatically, but I doubt it will give you the information you are looking for...

• I want to change the font of the Mobile phones me Mail because the current font is too small, how do I do it, can you help me, thank you, JR

  The police on my Mobile me in Firefox is small, I need to change the font size to a high on e, how I do. Th KS.

  Reset the page zoom on pages that cause problems: view > Zoom > reset (Ctrl + 0 (zero); Cmd + 0 on Mac)

  • http://KB.mozillazine.org/Zoom_text_of_web_pages

  You can use an extension to set a page zoom and the size of the default font on the web pages.

  • Default FullZoom Level: https://addons.mozilla.org/firefox/addon/default-fullzoom-level/
  • NoSquint: https://addons.mozilla.org/firefox/addon/nosquint/

• Missing to get the current font loading of vi

  Please see the attached screen. I can't find the vi.

  Office and report toolkit installed both on this new machine.

  Can someone give it, I use 8.6.

  What version of the Toolbox you trying to install? There has been updates in the past, some of which have been required to be compatible with specific versions of LabVIEW.

  Have you checked to see if the LLB is really? If so, can you open it? I would recommend that you run a "repair" on the installation of the tool box, or try reinstalling it.

• LabVIEW 8.6 compatible with current products of National Instrument

  Based on the above title, I'm currently have software LabView version 8.6. If I choose not to upgrade to the current version, the software will always be compatible with all National Instruments products? I'm hoping to create a centralized thereby logging of data center.

  Thank you

  Hi chywn, that specific products OR do you use? Here are some links on the website to OR who can answer your question:

  Which are compatible with the Versions of LabVIEW with that OR drivers?

  NOR-DAQ and LabVIEW (for Windows) version compatibility

  Module LabVIEW and Toolkit compatibility information

• The fonts are pixelated, blurry, difficult to read and I do not have IT cleartype

  I have an acer x203h of two monitors and a 17-inch dell monitor. Acer uses firefox and chrome the dell. I repeat that my cleartype is enabled. Firefox does not make the page correctly most of the time and then just turn pixelated, blurry, difficult to read, etc. Top page down helps sometimes travel sometimes do not. I move firefox to the monitor dell and it rasterizes less but still doesn't work. Chrome isn't Pixelize on each monitor, but it seems a little fuzzy. I've only use it for windows updates. More do the less chance of the police pixellisant.

  The current font is Arial size 18. Proportional is San Serif with the rest of the choices in Arial. Allow pages to choose their own pages is checked.

  Try disabling hardware acceleration in Firefox.

  • Tools > Options > advanced > General > Browsing: "use hardware acceleration when available.
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes
  • https://hacks.Mozilla.org/2010/09/hardware-acceleration/

• Increase the size of the font when composing emails in Mail

  I saw a number of posts about this, but so far no solution that doesn't involve alternative e-mail software download...

  When I compose an email on my iMac 27 inches with OS X El Capitan Version 10.11.2 and using the Mail application, the text is too small!  I could obviously increase the font size in each email (or zoom with command +)- but then the recipient of the email would be a size unusually large police (unless I remember to reduce it again before I hit send)!  Much of your time to do this for each font.

  This isn't a problem when reading the emails received in the Mail application.  Can I use the keys cmd + to increase the police * looks a * size without increasing the size of the current font.

  The question: to compose e-mails from Mac Mail, how can I increase the size displayed without increasing the actual font size when I send the police?

  Thank you very much

  You answered your own question.  Using "command +" to zoom in as you type so you can see clearly, and then use "command - 'to decrease after you have click Send.  This way the person on the other end doesn't end by with an email with the type of massive police.

• Set the latest version of Labview

  Hello

  If a PC has 2 (development) versions of Labview installed, for example Labview 2010 and 2012 of Labview, how does Teststand know what Labview adapter to use?

  I am wanting to avoid the situation where a newspaper operator (Windows), should open close Labview 2012, then open the Teststand operator Interface.

  If not followed then the operator Interface opens Labview 2010, which is not wanted.

  Thank you I could remove the old version of Labview and that each operator only has to open/close once Labview 2012.

  Y at - it a setting of all user/audience in Win XP and 7 which can be modified?

  Kind regards

  Gary.

  Or you can deploy your automation, so it does not use the development environment and it will automatically detect the correct version of the LV RTE.

  If all of the development environment, TestStand will use the current version of LabVIEW.  I think this could enlighten us: http://forums.ni.com/t5/LabVIEW/Change-currently-active-LV-version-in-batch-script/m-p/2422750#M7474...

  Here is another link on all of this:

  http://digital.NI.com/public.nsf/allkb/A3F87B8347E41363862575DD00139245?OpenDocument

  Hope this helps,

• Cannot control the color sensor in LabView for Mindstorms

  Hello!  New here.

  I'm currently boning on LabView via 'LabView for Lego Mindstorms' for a possible job in the near future, and I encountered a problem from the beginning.

  I am programming my brick Lego of LabView to simply activate the color sensor which is quite easy: I'm building a while loop and inside I have a block of color sensor attached to a block of text that displays the light intensity of the probe in the text on the brick.  I compile and run the detector turns on and I can read the intensity constantly updated on the brick.  This part works fine.  I would now like to control the light sensor (that doubles as a light source with color LEDs) on the front of the LV Panel.  The book I'm using (LabView for Lego Minstorms) says I should block sensor on the entry "generate light' do right click and choose"Create--> Control"in the menu that appears.  A Boolean command button should appear connected to the sensor block in the block Panel and a push button should appear in the front panel.  This is not what is happening.  Here, the two things are different.

  (1) I have no port "generate light" click on right-click.  This is probably using a version more day of Mindstorms that uses of the book.  It's a matter of book/Mindstorms, which probably cannot be resolved here but I hope that the next issue of problems will make it irrelevant.

  (2) I right click and create the control, but rather than create a Boolean command button as the book predicts, it creates an icon "BrickReference.lvclass".  He connects very well with the light sensor and a corresponding block is created in the front panel, but it is a paper weight that I can tell.  I can't do anything with it.  There are no buttons to push, no slider, button, button radio etc and I can't seem to change into something that somehow work.  I have delete and don't create a no kidding Boolean button from the library, but it does not connect to the photoelectric cell and so I can not compile.  So now, I'm a little stuck.

  I searched "Reference of the brick" online in the context of LabView class and have found little or nothing that talks about its definition or how I can use it to control the light via the front panel sensor.  Help with the software section is not much help, and yet I'm sure there must be a way to control a simple Lego light sensor of the façade for debugging purposes and others.

  If you know what I'm doing wrong or if you know a finish around this issue that will allow me to control a Mindstorms brick from the front in this way, please let me know.

  Thank you!

  Try to post in the forum of Lego.

  http://forums.NI.com/T5/LabVIEW-for-LEGO-MINDSTORMS-and/BD-p/460