CD burner is busy when you try to write media.

Similar Questions

• HP ENVY 7640: all new HP ENVY 7640 gets msg "Printer busy" when you try to fax doc to computer

  All the functions of the printer I checked so far work very well: copy, fax directly from the printer receive fax, scan to computer, etc..  But I get msg "Printer busy" when you try to fax doc to computer.  My installation conforms to guide: distinctive ring (double ring), I phone DSL and voice on the same line, using same USB cord and USB installation as I did with my just-replaced Officejet 6500 a.  Line number two.  When I call the number assigned to fax from my phone it double rings and sends fax tone.  Why get 'Print occupied' msg?

  Thank you, for your advice Sanal.  It was good advice, but it was the same steps that I had performed several times over the last few days.  It was also the same steps as your colleagues made when they took my computer in 12 hours of chats on Sat, 10-1.

  After submitting an online support request, fill out an information form and obtain a case number that I got phone contact (888-747-8338) yesterday (Thursday 10-7) w/another of your colleagues (Dennison) and during a 2 hour session he did not recommend, without success, then uninstalled the 7640 WANT and also the old HP 6500 has software installation re-installed, always without success.  Finally, he decided to reset the printer, a procedure that is not in any documentation I have or which has been described in troubleshooting online that I could find on your website, but it is true, my research is not comprehensive, just a vast.  It was something I had to do it manually, with Dennison tell me over the phone how to proceed using the console printer poster and associated buttons.  I had the feeling that it was a last resort, and fortunately, he finally managed!  I can now fax documents from my computer!

  Sorry to not return you earlier, you may have resulted in the same solution over time, but it would have taken to always back and forth.  In any case, thank you for your response.

• 'Burning disc error' when you try to burn a DVD

  Original title: I get the message "disc error" when trying to burn a DVD. I have recently restored factory settings and had no problem burning DVD previously. Any suggestions to fix this?

  I have a computer laptop advent 9117.

  Hi Adam,.

  What is the full and exact error message?

  I suggest you to refer to the article and see if it helps:

  Error message when you try to burn files on a recordable disc in Windows Vista: "there was an error burning this disc."

  http://support.Microsoft.com/kb/934544

  Let us know if it helps.

• Error: "Windows could not complete the format" when you try to write to blank DVDs

  I get this error when you try to copy files to a blank DVD.  I am trying to drag and drop files into the dvd player and after a small roar, the dvd ram drive stops and the error message.  Then the drive no longer recognizes blank dvd inside.  I am running Vista 32 bit and my dvd ram is a matshita dvd - ram uj880as ata.  I tried to switch to the microsoft 'FixIt' site, but the problem is not resolved.  I think that the report mentioned that the reader could recognize not writable or something to that extent.  The player can play DVDs fine, however.  Is there a solution to this problem by replacing the dvd ram drive?

  Hello

  Have you tried to close all programs and then insert the disc to see what is happening? Try a slower
  speed or mastered format. Have you added any burning new software lately - these tend to compete
  for resources and can interfere with each other.

  Should which CD or DVD format I use?
  http://Windows.Microsoft.com/en-us/Windows-Vista/which-CD-or-DVD-format-should-I-use

  ====================================

  You have disk problem as the CD/DVD is actually 4 discs in 1 case (burn CD & DVD and CD and DVD read).
  Therefore, it is not unusual for 1 or 2 rooms with not so work that others do it properly.

  Burning at low speed, or by using the master could help. A CD/DVD cleaner might help.

  CD have a tolerance + - and you can write on the outside edge.

  Several good info here:
  http://Club.myce.com/

  Notes on the troubleshooting and repair of readers of compact disks and CD-ROM Drives
  http://www.repairfaq.org/repair/F_cdfaq7.html#CDFAQ_014

  -----------------------------------------------------------------------

  Try this troubleshooting:

  Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
  Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
  This will refresh the default driver stack. Even if the reader does not appear to continue below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a loose cable or
  slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Hope these helps.
  Rob - bicycle - Mark Twain said it is good.

• C4580 on Macbook. Print the test and scans wireless but said network host is busy when you try to print.

  I installed everything and print a wireless test page. That works, scanning the wireless work. I can see print ink wireless levels but when I try to print the screen I get

  Host "xxx.xxx.x.xxx" network is busy. retrying in 30 seconds...

  But she does not ever print. I think it's just a matter of minor adjustment that anyone has any ideas?

  The test page does not use the computer (uggh) queue service, so often works with the spooler is hung up.

  We will restore the print system:

  -Sys Prefs, Print & Fax
  -Right (Ctrl) click the box of the print queue and select Reset Printing System.
  -Select the sign + to add again. Search for the printer, select it, and wait until the button 'Add' becomes available. Until it clicks.

  If this does not work, you will need to tell me which version of Mac OS X you are using and where you got the HP software.

• CyberLink recovery disk utility: can not burn to disc when you try the recovery computer

  Hi all

  Recently, my hard drive on my HP Pavilion p6674y was wiped out. I have a new hard drive installed in the computer. I created my own recovery DVDs when I bought the computer first. I started with the recovery discs and all was well until about 70% (on the 2 CD at this stage of 3) and then I got an error "0xe0ef000e.

  I then did some research and have ordered the discs of recovery from HP and then saw that I must download and burn to disc recovery disks Cyberlink utility so that the discs work. I have serious problems this CD to burn. I followed the instructions and when it is to the burning time of the installation wizard CD does not burn. It says on the wizard I'm full and there is a 'yes' 'no' and the button "Cancel". When I hit Yes the computer I currently use just restarts. I then try the disc (even if I can say that it's always empty) in my Pavilion and the checkmark never comes to the top.

  I'm not sure what I'm doing wrong.

  Help, please.

  Thank you

  Hello:

  This utility is not absolutely necessary.

  You only need if the HP recovery discs do not work on your new hard drive.

  I tried to run the file on Windows 8 and it wrong, then I won't be able to help you with that.

  While you wait for your drives HP recovery plant to arrive, you can make your own plain W7 installation media and use that to install W7, so at least you can use your PC.

  Here is how to do this.  My only review of the instructions is not to activate W7, unless you want to. Just skip entered the product key from the COA Microsoft sticker on your PC case.

  You have 30 days to use the program without activating it.

  Link to downloads ISO of W7 is below. Download the Windows 7 version that is on your product (Home Premium, professional or ultimate) key to apply.  SP1 Refresh of media files are the latest ISO files.

  http://forums.mydigitallife.info/threads/14709-Windows-7-Digital-River-direct-links-multiple-languag...

  Use the installation of Windows 7 USB/DVD tool to compile the ISO file that you download from Digital River. The link below. You need a DVD or a 4 GB flash drive using the USB compilation method.

  Use the product key of windows 7 of 25 characters to activate your installation.

  http://download.CNET.com/Windows-7-USB-DVD-download-tool/3000-18513_4-10972600.html

  Then go to the support of the PC and driver page to install the drivers you need.

• 1290 error when you try to install Media Center extender for X 360 in Win7 Pro x 64

  OK, here's one for someone who knows Win7 Kernel internals.

  I am trying to connect my XBox 360 to my PC MC with Windows 7 Pro x 64. When I type the code 8 digits of the Xbox in Media Center, I get an error "Setup." Check the system error log, I found that it was a failure of the Media Extender service to start. Stop of is an error 1290, that says "service start failed because one or more services in the same process have a service SID inconsistent type parameter.» SID type has something to do with the core permissions or somesuch. WAY out of my League.
  The only thing that I could find online is that this error occurs sometimes in what concerns the time Service Windows, and that a registry edit to fix it. I tried a similar "fix" on this service registry entry, but it had no effect on this error, so I changed the return register.
  Someone has an idea of what I might try next? I did all the standard things that are recommended for problems of Media Extender, including uninstalling and reinstalling all components of media. Re-installation of Windows is NOT an option at this stage, this computer is used by all my children, and there would be a mutiny if he became unavailable for a long period of time (especially for as "lame" reason like this). I'd really listen to my media to my XBox. I hope that someone with some knowledge of the works of this service lies this question one day.
  Thanks for reading.
  "Bottom in Phoenix.

  Hi Ken Nichols
  You can perform the steps below and check them if they help you to solve the problem-
  Step 1:

  a. click on start toreduce this includes this image, type regedit in the Search box, and then click regedit.exe in the list of programs .

  If you are prompted for an administrator password or a confirmation, type your password, or click continue.

  b. Locate the following registry subkey and click on it:

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Mcx2Svc

  (c) in the part of details, right-click ImagePathand then click change.

  d. in the value data box, type the following registry value, and then click OK:
  %SystemRoot%\system32\svchost.exe k fontcache

   

  e. make sure also that the ServiceSidType is set to 1.

  f. exit the registry editor and then restart the computer.

  EDITING REGISTRY WARNING:
  Important:  This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows: http://support.microsoft.com/kb/322756

  Step 2:

  a. open administrative tools by clicking the Start button, then Control Panel. In the search box, type administrative tools, and then click Administrative Tools.

  b. double-click on Services. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  c. right-click on the Media Center Extender Service and then click Properties.

  d. on the general tab, next to startup type, make sure that automatic is selected.

  e. If the service is not already running, under Service status, click Start and then click OK. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

   

  I hope this helps.

• Get the error when you try to write to a file using java script in my Metro app

  I'm discovering a problem in my App Metro and thought that I will create a file to copy all log messages in ther... I tried the following

  var LogFile = "LogFile.txt";

  () Windows.Storage.DownloadsFolder.createFileAsync("LogFile.txt").done

  {function (file)

  LogFile = file;

  });

  Windows.Storage.FileIO.appendLinesAsync (log file, "Test") .done ();<-- line="">

  but then, I get the following error:

  Unhandled exception, line 26, column 5 in ms-appx://windowsmultimediaperformanceapplication/js/default.js

  0x800a000d - JavaScript runtime error: Type mismatch

  It creates the file correctly, but it fails to write to it. Any help will be appreciated. I looked at the code example provided and talked about when writing this.

  Hey Kajal,

  The question you posted would be better suited in the MSDN Forums. I would recommend posting your query in the MSDN Forums.

  http://social.msdn.Microsoft.com/forums/en-us/winappswithhtml5/threads

• Error (-55) when you try to download Media Encoder CC 2015.

  I have a subscription to creative cloud with more CC for 2014. Try to download CC Media Encoder 2015 but get error message. Update didn't download error. Press Retry to try again, or contact customer support. (((55)))) 55. I pressed try again several times. No luck. I have Window 7 PC with 12 GB of RAM with 120 GB of free space on the hard disk, main. All thoughts. Thanks in advance.

  Error-55 is a connectivity problem while downloading applications between the server and the Client computer.

  Try to use the direct download links and check:

  Direct download links of Adobe CC 2015: 2015 creative cloud release | ProDesignTools

• 10 PSE closes when you try to backup media

  I'm running a Windows 7 (64 bit) Sony Vaio VPCCW2S1E.

  All windows and PES 10 updates are up to date. Default settings apply

  Have also installed and reinstalled.

  What's happening:

  1. I opened PSE10 Organizer and reminder to backup then appears

  2 save the catalog - Yes via HD or DVD option

  3. get a ' items 10 organizing has stopped working windows checks for a solution to the problem

  4. then ' Elements 10 organizing has stopped working - a problem caused blocking the program works correctly. Windows will close the program and notify you if a solution is available.

  So far, I have a solution to Windows or found that Adobe.

  I seem to be able to import images and change as usual.

  Can someone give me a solution. I copied 'my images' on a reader network, but really need to be able to save some PSE10.

  Kind regards

  Neil

  Hi, I started from the 'Welcome' screen, but was the cause of the problem, after several hours online chat with Adobe PSE support Alexander. a guy at the top of the page.

  The problem was caused by my Freecom Toughdrive 1 TB USB harddrive. Once disconnected from the back upward process goes well.

  My another 320 Freecom toughdrive is taking the back upward. We believe that the software password provided with the 1 TB drive can be the culprit, but until I have test this theory, I'll use my other records. I also discovered that adobe PSE shouldn't be saved on a network drive.

  hope it helps someone else too

• Satellite L500-19 X - code error when you try to burn on DVD

  Error code: 380381-26 - 2A 037303 when you try to burn to DVD.

  Can anyone help?

  Hello

  What program you use for burning discs?
  What operating system is installed?
  What kind of blank DVDs you are using?

  To be honest, I can t say something about it and description of a sentence is too short in this case.

  I advise to use high-quality Verbatim or TDK media. I have pretty good experience with DVD-R DVD + R media.

• What is error C00D1197 in windows media player when you try to burn a CD.?

  What is error C00D1197 in windows media player when you try to burn a CD.?

  Hello

  These should help:

  WMP - C00D1197
  http://Windows.Microsoft.com/en-us/Windows7/C00D1197

  Windows Media Player Error Message help
  http://www.Microsoft.com/windows/windowsmedia/player/Webhelp/default.aspx?&mpver=11.0.5721.5145&ID=C00D1197&ContextId=71&OriginalID=80070002

  Also check this KB which could apply to other versions of WMP
  http://support.Microsoft.com/kb/834483

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• 8FFD020E and C00D11AB when you try to burn CDs

  original title: 8FFD020E and C00D11AB

  This error prevents appear when you try to burn CDs. Have tried all of the suggestions. This is a very common errror, a lot of people on the Internet asking about it!  I managed to burn a couple of week last CD, after the publication of this error. Now, does not burn yet. This should be fixed! What is the solution?

  Hello

  Method 1:
  You can run the fix - it from the following link.
  Your CD or DVD drive cannot read or write media
  http://support.Microsoft.com/GP/cd_dvd_drive_problems
  Method 2:
  You can read the following article.
  How to troubleshoot problems that occur when you copy data on a CD - R or CD - RW optical disc in Windows XP
  http://support.Microsoft.com/kb/324129
  See also:
  How to copy information to a CD in Windows XP
  http://support.Microsoft.com/kb/306524
  How to troubleshoot Audio CD creation in Windows Media for Windows XP player
  http://support.Microsoft.com/kb/306319

• "An error occurred" appears when you try to burn a CD

  After ordering the Windows Media Player 11 to START to BURN, a red circle with an X appears immediately to the bottom of the list of the songs selected for burning (in the title, in the middle of the main column).  CD were burned on this same burner, but I did not burn in about three months. Any suggestions?

  Hello

  ·        Do you have any third party burners installed on the system?

  ·        What is the exact error you get when you try to burn the CD?

  ·        You are able to use the CD drive for playback of the disc?

  I suggest you to try with another CD and check if you're able to burn or not.

  I suggest you run the fix it is present in the article below.

  Your CD or DVD drive cannot read or write media

  http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us

  Apart from that, I suggest you follow the steps mentioned in the article below.

  How to troubleshoot problems that occur when you copy data on a CD - R or CD - RW optical disc in Windows XP

  http://support.Microsoft.com/kb/324129

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows media player error "Windows Media Player has encountered a problem when you try to read the file" after burning CDs.

  Original title: "missing songs" in my windows media player then burn them on several cd :((

  I burned songs to several cd using my Windows media player to make different Cd, but after I returned to my library all the songs that I burned to the CD have disappeared, they are there, but they won't play it is as if they have been deleted, a window appears saying that windows media player has encountered a problem when you try to play the file. I did not notice this until after Cd burning a few I can't do more because if I keep going I'm not going to have more songs in my library! I don't know what to do im going crazy, it took me a long time to get all of these songs and now he disappeared! I have Windows 7 Ultimate is the version 12.0.7601.17514 hope that helps

  Hello
   
   
  They were playing before you burn CDs?
   
   
  Method 1:
  
  Open the troubleshooting Windows Media Player settings Troubleshooter
  http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Media-Player-settings-Troubleshooter
  Open the troubleshooter in the Windows Media Player library:
  http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Media-Player-library-Troubleshooter
  
  Method 2:
  
  This problem may be due to database corruption. You can delete the Windows Media Player database and check if the problem persists.

  Steps to clear the database of windows media player:

  a. exit Windows Media Player.
  b. Click Start, run, type %LOCALAPPDATA%\Microsoft\Media Player and then click OK.
  c. Select all files in the folder and then click on Delete on the file menu.

  Note you don't have to remove the folders that are in this folder.

  d. restart Windows Media Player.

  Note: Windows Media Player automatically rebuilds the database.

  If this does not resolve the problem, disable the Windows Media Player database cache files. To do this, follow these steps:

  a. exit Windows Media Player.

  b. Click Start, click Run, type % LOCALAPPDATA%\Microsoft and then click OK.

  c. Select the Media Player folder, and then click on Delete on the file menu.

  d. restart Windows Media Player.

  Note Windows Media Player automatically rebuilds the database.