Looking for a DVD of Vista Home Premium 64-bit

Similar Questions

• System recovery fails on the new HARD drive (HP - DVD, Vista Home Premium 64 - bit, DV4-1225dx)

  I have a Pavilion DV4-1225dx who had a hard drive failure. VISTA Home Premium 64-bit.

  Went to buy the oem HDD @ Tiger Direct (0A 56415 Hitachi Travelstar 5 K 320 Mobile Hard drive - 2.5 ", 5400 RPM, SATA 3 G, 250GB, 8MB Cache) but it was out of stock. I bought the proposed replacement (WD Blue 320 Mobile Hard Drive - designed for the calculation of daily - 2.5 "SATA 3 Gb/s, 5400 RPM, 8 MB c...)

  The HP system recovery DVDs work for more than 12 hours and fails. CTOERROR.flg

  ChkErrBB.CMD: Detect an error in the PININST_BBV

  ChkErrBB.CMD: Check C:\system.sav\logs\BurnBootWarn.log

  In addition to a video driver not install, I found:

  C:windows\system32\Drivers\enecir.sys not found

  Recovering the system formats the HARD disk properly. After that the failure of the HARD drive recovery shows that:

  C: 38.8 GB free of 58.0 GB

  E: 2.02 GB free of 12.9 GB

  15 f009wm 8.1 WIN 64 bit
  Office Jet 2540
  P2-1113w WIN 7 64 bit
  G71-340US WIN 7 64 bit
  dv4-1225dx VIsta 64-bit
  zd7000 WIN XP Pro
  xv886 Millennium WIN / WIN XP Pro
  HP deskjet 6980xi
  HP pavilion xt236 / ze4200 WIN XP Media Edition

  found an another Hitachi 0A 56415 and was able to install with recovery disks. Have used the new and more great as a backup USB drive with in a disk caddy.

• need an iso file to install windows for windows vista Home premium 32-bit

  I have a product key, but need Windows vista Home Premium (32 bit) ISO because I lost the part recovery partition

  Hello

  There is no Windows Vista downloads available from Microsoft.

  You can contact your computer manufacturer and ask them to send you a set of recovery disks.

  They should do this for a small fee.

  To reinstall Vista using their recovery disk/s, you start from the 1st recovery disk they provide and follow the manufacturer's instructions to reinstall:

  You need to change the Boot order to make the DVD/CD drive 1st in the boot order:

  How to change the Boot order in BIOS:

  http://pcsupport.about.com/od/fixtheproblem/SS/bootorderchange.htm

  "How to replace Microsoft software or hardware, order service packs and replace product manuals.

  http://support.Microsoft.com/kb/326246

  Some manufacturers have more available Vista recovery disks.

  If this happens, you may need to try this instead:

  You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.

  Other manufacturers recovery DVDs are should not be used for this purpose.

  And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs

  Here's how to do a clean install of Vista using a DVD of Vista from Microsoft:

  "How to do a clean install and configure with a full Version of Vista '

  http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html

  And once the operating system is installed, go to your computer manufacturer's website and get the latest drivers for your particular model or laptop computer.

  And phone Activation may be necessary when you use the above installation method.

  "How to activate Vista normally and by Activation of the phone '

  http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html

  See you soon

• How to activate the plug ins for WPM 11 on Windows Vista Home Premium 32 bit OS? __

  Cannot read dvd OMP. DVD will not auto play and got an error msg stating that the plug-ins have been disabled.  How to activate the plug ins?  I can't reinstall/repair WPM 11 under Vista.  I tried to update without success.  I ran sfc / scannow and there are no errors, found no errors or corrupted files.  Please indicate how do 11 WPM version 11.6002.18065 not work on my Vista Home Premium 32 bit OS! plug-ins have been disabled in 11 OMP

  I have installed a codec pack k - lite with no luck!

  Hi kikstart2,
   
  For the CD/DVD drive problem, try the following steps.
  1. visit the following Web site, click the "Run now" button and follow the instructions in the wizard to run the tool: http://support.microsoft.com/gp/cd_dvd_drive_problems
  2. once the tool is running, restart the computer.
  3. Insert the CD / DVD and check if it works very well.
   
  NOTE: There is no option to repair/reinstall Windows Media Player on Windows Vista.
   
  If the problem persists, restore the computer to an earlier time when everything worked well. To do this, try the following steps.
  1. Click Start, type system restore in the search box and press ENTER.
  If you are prompted for an administrator password or for confirmation, type the password, or click on continue.
  2. click on choose a different restore point and then click Next.
  3. click on a date on which the issue moved not.
  4. click on next.
  5. click on finish.
  6. check if everything works well.
   
  For more information see what is system restore?
   
  Kind regards
  Syed
  Answers from Microsoft supports the engineer.

• The contract of affreightment for my VISTA Home Premium 32 bit [oem] will work for VISTA Ultimate OEM Dell disk shape.

  Mine has the Express Vista Upgrade Help Express upgrade DVD from Dell for Vista Home Premium 32 bit in March 2007. [XP to Vista was a promotion at the time]. I did a clean install of vista Home Premium 32-bit using the DVD upgrade at that time here.

  Now, I got Dell VISTA 64-bit DVD to reinstall [Dell Rep told me that she did not have the Vista Home Premium 64-bit and is - this okay for me to receive the DVD of reinstalling Vista Ultimate 64 bit-for which I accepted]

  Resettlement 64bits Ultimate DVD arrived today, in an envelope. I can't find a certificate of authenticity [COA] inside. However the sleeve that wrote this about the following:

  "The Microsoft certificate of authenticity [COA] operating system is a multicolored label located on the side or the bottom of your computer. The certificate of Authenticity contains the product key code, which may be needed to complete the installation of the operating system. »

  Now where's position? Can I go ahead with my clean install of Vista Ultimate 64 bit with the disc I received after formatting my drive where my Vista Home Premium 32-bit far is present.

  I am owner of a single computer in the home environment.

  Snow

  As Dell-Jesse has already been said, "COA at the back of the system is ONLY for Vista 32 and 64 bits and NOT Vista Ultimate or business House. Computers Dell will not have a certificate of authenticity if you use the Dell supplied DVD on a Dell computer. The bios detects that it is a Dell disk and a Dell system and is not a certificate of authenticity'.» Good luck with the new OS!

• Error code 8024200d when installing SP2 for Vista Home Premium (32 bit)

  I use Vista Home Premium (32 bit).  When Windows Update recently
  tried to install SP2 (several times), the quoted error message
  repeatedly prevented installation.  Google showed a number of similar
  references to the problems associated with SP1 (from one year or if there are and less).  Is
  There is a work around for this message because it applies to SP2?

  Biggar Gordon
  Houston, Texas

  Hi Colonel biggs,

  Welcome to the Forums Microsoft Vista

  This problem may occur if one of the following conditions is true:

  · A program on your computer interfered with the installation of the service pack.

  · There is an inconsistency in the store of Windows services. The store Windows maintenance is a required component to install service packs.

  To resolve this problem, try each resolution in the 'General resolution"and the"Advanced Troubleshooting"section in the order in which they are presented. After trying a resolution, try to install the service pack again. If you can't always install the service pack, try the next resolution.

  Resolution 1: Install the stand-alone package for the service pack instead of using Windows Update to install the Service Pack

  Note If you have already tried to install the stand-alone package for the service pack and you have encountered this problem, skip this resolution and go to resolution 2.

  If you don't know if you've tried to install the stand-alone package for the service pack, it is recommended that you try the following steps to install the stand-alone package for the service pack. By using the stand-alone package to install the service pack, you eliminate installation issues that may be related to Windows Update. This simplifies the troubleshooting process

  Solution 2: Run the system update readiness tool

  System Update tool checks your computer and trying to resolve certain conditions that can interfere with the installation of the updates or other software. However, before you download the tool, you must determine whether your computer is running a 32-bit version or a 64 bit version of the Windows Vista operating system. If your computer is Windows Vista installed, and you know which version you are using, go to the section "how to download the system update readiness tool. If you are unsure which version your computer has installed, follow these steps:

  1. click on Start

  2. collapse this includes it in the Search box, type System, and then click System in the programs list.

  The operating system is displayed as follows:

  · For a 32 - bit version operating system, 32-bit operating system appears for the system type under System.

  · For a 64 - bit version operating system, 64-bit operating system appears for the system type under System.

  After you determine which version of Windows Vista, your computer is running, download system update readiness tool.

  Resolution 3: Close or disable any applications that may be running, restart the computer and then install the service pack

  1. Close all applications and restart your computer.
  2. Once your computer has restarted, disable any antivirus or any antispyware application that can load during the startup process. You can normally disable the notification area application. This area is located in the bottom right corner of the computer screen. To disable an application in the notification area, follow these steps:
  1. 1. Right-click the icon of the third-party program.
     2. Click Close, disable, outputor an equivalent term in the list of options. If these options are not available, you may open the application and then close or disable in the application.
  2. As soon as you close the antivirus or the antispyware software, try to install the download package full of the service pack that you previously downloaded from the following Microsoft Download Center Web site:

  http://www.Microsoft.com/downloads (http://www.microsoft.com/downloads)

  1. After completing the installation of the service pack, enable the antivirus or the antispyware software that you disabled in the previous steps.

  For more information follow the link below:

  http://support.Microsoft.com/kb/947366

  Hope this information is useful.

  Suresh G
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Is there a possibility of upgrade version OEM of Windows Vista Home Premium 32 - bit for Windows 7 for free?

  I learned from a few sources online that I can get a 'upgrade' for the version OEM of Windows Vista Home Premium 32 - bit for Windows 7 free. Is this true? Should I participate in forums feedback for Windows, etc. in order to acquire such a valuable product?

  If not, is there another 'economic' way to get a copy of windows 7?

  Really appreciate your time in answering my question.

  Despite what you may have "competent" wrong, there is no "free" upgrade to Windows 7.  You can buy Windows 7 from the Microsoft Store. Carey Frisch

• Update for my laptop Inspiron 1525 Windows Vista Home Premium 32-bit to Windows 7 or 8, then at 10 Windows

  Hello

  I searched for a solution upgrade my Inspiron 1525 notebook, pre-installed with Vista Home Premium 32-bit when I bought it.
  The goal is to prepare the way for upgrade to Windows 10.
  I need to start with Windows 7 or 8.

  I couldn't find a way on the Dell Web site.

  Thanks in advance!
  Isabelle

  Hello

  Please write to us!

  We would like to inform you that the Inspiron 1525 has not been tested for windows 10 and we do not suggest that you upgrade to the version of windows

  Nicely private message the service tag and your email address.

  Thank you

  Robin

• Printing for Vista Home Premium 32-bit network: Blank document or disappears from the queue

  I'm having trouble printing large format HP DeskJet 1000 c, which is connected via a parallel cable to my Media Center/DVR PC running Windows Vista Home Premium 32 - bit SP2 on my printer. I connected with the success of this printer to two different computers, a desktop PC running Windows Vista Home Premium 64 - bit SP2 and a laptop Mac OS x 10.5.8. I can print from the local computer very well, but when I try and use the printer on the network, one of two things happens depending on what machine I try and print from:

  1. from Vista 64 Desktop: printing the task appears, treats and disappears from the queue to the local printing on PC DVR. Printer advance a sheet of paper as if he were about to print, then waits with a power indicator light flashes. If you send a new job network, the tip sheet of paper is ejected and the process begins again. If you send a new job locally, the tip sheet of paper is ejected and the local job will print normally.

  2. from Mac OS x: printing the task appears, treats and disappears from the queue to the local printing on PC DVR. Printer does nothing.

  Although the process of networking of printers with OS X 10.5 and Vista is a bit more complicated (annoying) it was with XP, I am able to print from the Mac to a printer on the Vista 64 machine very well. Similarly, PC DVR allows you to print to the printer of the Vista 64 computer and a printer connected to my Mac desktop.

  I checked the HP site for drivers and since it is a quite old printer, there is no listed for any operating system newer than Windows 2000 (which a pilot has been included with the operating system). Any ideas as to why the PC DVR will not take of the network print jobs? Unfortunately, this complex printer (3 printers, 4 machines) installation is somewhat needed due to the possibilities of each printer and how my home office is laid out. If they did a multifunction, printer laser color large network format, I could sell my soul for what it... But I'm not aware of such a machine available to mortals.

  There is a difficulty that recently came on the HP Forums for 64-bit Vista:

  http://h30434.www3.HP.com/T5/printer-all-in-one-software-and/DeskJet-710-720-810-820-100-series-printers-patch-for-64-bit/m-p/203377#U203377

  All you have to is to download the mentioned file and replace some dll with those provided.

  The question remains with OS X, but I do not expect that Microsoft will provide no support for this.

• After the upgrade to Vista Home Premium (32 bit) for Windows 7 Ultimate (64 bit), I can see my second hard drive in the Device Manager, but I am not able to access it in the Explorer... How can I fix it?

  How can I access my hardrive second in windows Explorer after I have updated to Vista Home Premium (32 bit) for Windows 7 Ultimate (64 bit)?

  Go to disk management and assign a drive letter to the drive.

• How to install Windows Vista Home Premium 64-bit?

  Hello! Can someone tell me how can I make Windows Vista Home Premium 32-bit to 64-bit?

  Here's my question: -.

  1. I bought a version of Windows Vista Edition retail family Premium, the package has only the 32-bit support (DVD). I found a few website say that the product key for the retail version of Windows is for 32-bit and 64-bit, as long as we use 32 - bit or 64 - bit on a single computer at a time. If I'm wrong, anyone could answer my question?

  2. now, I plan to move from 32 bit to 64 bit, my problem is that the version sold at retail of Windows that I purchased only contain 32-bit media:-

  (a) is there a way I could install the 64-bit Windows?

  (b) is it possible I could get 64-bit support?

  (c) could I use media in Windows Vista Home Premium 64-bit retail a friend to install on my computer? And after installation, I can activate Windows with my product key?

  Looking forward to the responses, thank you.

  Do you a clean install from 32 bit to 64 bit.

  http://www.Microsoft.com/windowsvista/1033/ordermedia/default.mspx

  Link above is how you get 64 bit DVD, if you have a retail license.

  You can use any Microsoft Vista 64-bit DVD and use your 32 bit key as you say it's Vista Retail

  Or borrow a good Microsoft Vista DVD (not Dell, HP, etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  Save all data, because it will be lost during a clean installation.

  See you soon...

  Mick Murphy - Microsoft partner

• Blue Screen at shutdown - STOP: 0x0000 008F (Vista Home Premium 32-bit)

  Whenever I stop, I get a blue screen of death.  I had not used my computer for a few months, so I do not remember if the hardware or software has been added.

  I put the BSOD to stop so I could write the codes - I googled them came but with nothing.

  Here is what says the BSOD:
  STOP: 0x0000 008F (0 x 0005 C000, 0 x C4E3, 0 x AC2E DC0C, 0 x 0000 0000 8261)

  My system runs Vista Home Premium (32 bit) on a bridge 5442 with 4 GB of Ram and an Intel Core 2 CPU 4400 running 2.00 Ghz

  Any help or advice is most appreciated.

  Thank you kindly!
  Marilyn P

  Hello

  Two main causes of this blue screen video drivers and BIOS - check with system manufacturer site for
  View of the adapter (video) and BIOS, then on site of the manufacturer of the device for the last video. There may be other drivers
  in order to check there. DISABLE the auto-pilot plant as those who are older and if updates Windows suggests
  a pilot just HIDE. Antivirus is another possibility.

  See methods of update driver generic in the next message.

  BCCode: 8th 0x0000008E is the same as 0x1000008E

  Cause

  Bug KERNEL_MODE_EXCEPTION_NOT_HANDLED control is a very common bug control. To interpret it, you must identify which exception has been generated.

  Common exception codes are:

  • 0xc0000005: STATUS_ACCESS_VIOLATION indicates that a memory access violation has occurred.

  Solve the problem

  If you do not have to debug this problem, you must use certain basic troubleshooting techniques:

  • Make sure you have enough disk space.
  • If a driver is identified in the bug check message, disable the driver or check with the manufacturer for driver updates.
  • Try changing video cards.
  • Check with your hardware vendor for updates to the BIOS.
  • Disable the BIOS memory options such as implementing caching or shading.

  If you plan to debug this problem, you may find it difficult to get a stack trace. Parameter 2 (the address of the exception) should identify the driver or function that caused the problem.

  If you do not know the specific cause of the exception, consider the following:

  • Hardware incompatibility. Ensure that all new equipment installed is listed in the list of the products tested Microsoft Windows market.
  • Service driver or defective peripheral system. A chauffeur service or defective peripheral system could be responsible for this error. The hardware problems, such as BIOS incompatibilities, conflicts of memory and IRQ conflicts can also generate this error.

  If the verification of the message bug list a driver by name, disable or remove that driver. In addition, disable or remove drivers or services that have been recently added. If the error occurs during the startup sequence and the system partition is formatted with the NTFS file system, you may be able to use Safe Mode to rename or to delete the faulty driver. If the driver is used as part of the start-up procedure of the system Safe Mode, you must start the computer by using the Recovery Console to access the file.

  If the problem is associated with Win32k.sys, the source of the error may be a third-party remote control program. If this software is installed, you can remove the system startup service using the recovery and then Console by removing the offending system service file.

  Check the system log in Event Viewer for additional error messages that might help identify the device or driver responsible for control of bug 0x1E. You can disable the cache in memory of the BIOS to try to resolve the error. You must also run the diagnostics of material, especially the scanner memory, which provides the manufacturer of the system. For more information about these procedures, see the manual of your computer.

  The error that generates this message may occur after the first reboot during Windows Setup, or after installation is complete. A possible cause of the error is lack of disk space for installation and the system BIOS incompatibilities. For any problems during the installation of Windows that are associated with lack of disk space, reduce the number of files on the hard disk drive target. Search and delete temporary files that you do not have to have, files hidden Internet, application backup files and files saved .chk , which contain fragments of files on disk scans. You can also use an another hard disk drive with more free space for the installation.

  You can solve the problems of BIOS by upgrading the version of the system BIOS

  =============================================

  Look in the Event Viewer to see if something is reported on those.
  http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

  MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
  TIP - Options - Advanced filter allows you to see a period of time instead of the entire file.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  -------------------------------------------------------------------------

  It comes to my convenience store generic bluescreen:

  Here are a few ways to possibly fix the blue screen issue. If you could give the info from the blue screen that would be
  Help. Such as ITC and 4 others entered at the bottom left. And any other information such as STOP error
  codes and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

  As examples:

  BCCode: 116
  BCP1: 87BC9510
  BCP2: 8C013D80
  BCP3: 00000000
  BCP4: 00000002

  or in this format:

  Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
  Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

  It is an excellent tool for displaying the blue screen error information

  BlueScreenView scans all your minidump files created during 'blue screen of death' crashes, and displays the
  information on all accidents of a table - free
  http://www.NirSoft.NET/utils/blue_screen_view.html

  BlueScreens many are caused by old or damaged drivers, video drivers in particular, but there are other causes.

  You can follow these steps in the Safe Mode if necessary or the command prompt Vista DVD or Options of recovery if your
  system installed by the manufacturer.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  You can try a system restore to a point before the problem started when one exists.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  -------------------------------------------------------------------------

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  The log can give you the answer if there is a corrupted driver. (Says not all possible driver problems).

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.
  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -------------------------------------------------------------------------

  Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, 3rd party keyboard and
  smile, as well as of other major device drivers.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  -------------------------------------------------------------------------

  How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart unexpectedly
  http://support.Microsoft.com/kb/958233

  Troubleshooting, STOP error blue screen Vista
  http://www.chicagotech.NET/Vista/vistabluescreen.htm

  Understanding and decoding BSOD (blue screen of death) Messages
  http://www.Taranfx.com/blog/?p=692

  Windows - troubleshooting blue screen errors
  http://KB.wisc.edu/page.php?id=7033

  -------------------------------------------------------------------------

  In some cases, it may be necessary.

  The Options or Vista recovery disk Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  I hope this helps and happy holidays!

  Rob - bicycle - Mark Twain said it is good.

• Reinstall Vista Home Premium 32 bit SP2

  Not good with computers... need help... very much appreciated... I ran into the horrible black screen problem... I can't start in safe mode, no problem, but can only access via the normal and Task Manager normal mode still doesn't work well... internet and other programs will not work... I tried many options and now looking to do a reinstall of Vista Home Premium 32 bit SP2

  Question is how can I do reinstall without deleting all my personal files? Is this possible? If Yes, how should I do it... as very detailed information is appreciated as I'm not tech savy... Also, if it is not possible, what is your recommendation to save my files before reinstalling? External hard drive?

  I appreciate any help I can get. Thank you!

  A resettlement removes all the info.

  If Safe Mode does not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner:http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Data recovery:

  1. slave of your hard drive in another computer and read/save your data out there.

  2. put your Hard drive in a USB hard drive case, plug it into another computer and read/save from there.

  3 Alternatively, use Knoppix Live CD to recover data:

  http://www.Knopper.NET/Knoppix/index-en.html

  Download/save the file Knoppix Live CD ISO above.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://isorecorder.alexfeinman.com/isorecorder.htm

  Download the Vista software from the link above.

  After installing above ISO burning software, right click on the Knoppix ISO file > copy the Image to a CD.

  Knoppix is not installed on your PC; use only the resources of your PC, RAM, graphics etc.

  Change the boot order in YOUR computer/laptop to the CD/DVD Drive 1^st in the boot order.

  Plug a Flash Drive/Memory Stick, BOOT with the Live CD, and you should be able to read the hard drive.

  When the desktop loads, you will see at least two drive hard icons on the desktop (one for your hard drive) and one for the USB key.

  Click on the icons of hard drive to open and to understand which drive is which.

  Click the icon for the USB drive and click on "Actions > Change the read/write mode" so you can write to disk (it is read-only by default for security reasons).

  Now to find the files you want to back up, just drag and drop them on the USB. When you're done, shut down the system and remove the USB key.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Vista recovery media obtain and/or use the Partition Recovery Vista on your computer to the factory settings .

  There is no Vista free download legal available.

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

  See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

  Normally, you have to press F10 or F11 at startup to start the recovery process...

  Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Also ask them if it is possible to do the recovery disk/s for the recovery Partition in case of a system Crash or hard drive failure.

  They will tell you how to do this.

  Every computer manufacturer has their own way of making recovery disk/s.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Or borrow a good Microsoft Vista DVD (not Dell, HP, Acer, recovery disk/s etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  Save all data, because it will be lost during a clean installation.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://support.Microsoft.com/default.aspx/KB/326246

  'How to replace Microsoft software or hardware, order service packs and upgrades, and replace product manuals'

  See you soon.

  Mick Murphy - Microsoft partner

• Why Windows Vista Home Premium 32-bit installs not Windows updates?

  I am not able to download and install Windows Vista Home Premium 32 bit windows update.  This Gateway laptop has always been able to quickly and easily install the update by clicking windows update.  However, since the introduction of Windows 10 it has been a lot of your time trying to install updates.  I had this same problem with Windows 7 too.  Never before there was no problem for the two operating systems.  Installation of Windows updates has always been easy and fast without any problem.  Running the troubleshooting isn't good and hunting error codes has been unproductive.  What the hell is happening?

  Hi Joe Cool1:

  'Check for updates...' crashes and slow Windows updates currently affect the SP2 for Vista and Win 7 SP1 users, and I doubt it's a coincidence that Microsoft has ended mainstream support and only provides support for these two operating systems.  The evidence points more to a problem with the Windows Update Agent (WUA Vista, C:\Windows\system32\wuaueng.dll v7.6.7600.256 has not been updated since June 2012) and the problem tends to be more prevalent on computers with slower processors and a limited amount of RAM.

  There are step-by-step instructions posted on 16 June 2016 wire m #l's updates doesn't work do not, he has been looking for updates to the hours which should speed up Windows Update for both for Win 7 SP1 and SP2 for Vista.  The instructions were for users of Vista, so when you reach step 4 just use the appropriate links of Win 7 on the page Web of Dalia http://wu.krelay.de/en/ (Win 7 x 64 if you have 64-bit Win 7 OS;) Win 7 x 86 if you have a 32-bit Win 7 OS) to download packages update stand-alone correct (.msu files) for missing Windows kernel mode driver (Win32K.sys) updates on your Win 7 machine.

  You can also find some useful tips in entry 9 August 2016 Microsoft MVP Woody Leonhard on his Woody on Windows InfoWorld blog titled 2 easy steps to speed up scans of Windows 7 update that includes detailed instructions for the use of circumvention of Dalai to http://wu.krelay.de/en/.  Woody's workaround for Dalai to speed up Windows Update to users as well Win 7 SP1 and SP2 for Vista.

  ------------
  32 bit Vista Home Premium SP2 * Firefox v48.0.1 * NIS v22.7.1.32 * MMFA Premium v2.2.1
  HP Pavilion dv6835ca Intel Core2Duo T5550 1.83 GHz, 3 GB RAM, NVIDIA GeForce 8400 M GS

• Where can I download windows 7 ultimate 32 bit to upgrade a Vista Home Premium 32 bit?

  Hello

  I have a little problem. I have this Toshiba laptop comes with Windows Vista Home Premium 32 bit version. It came with a free upgrade to Windows 7. Toshiba not did me not a CD for Windows Vista or 7. I was too lazy to update. Now my computer has some problems, so I thought I would just upgrade to Windows 7. But I find no legal download online to upgrade. Why is this? Where can I find it? And if they are available, he will ask the product key for windows 7, or I will be able to spend with my key for windows vista?

  I'd appreciate your help.

  Kind regards

  Abbas

  Hello

  There are free downloads of Windows 7, but you would need a product key to activate it. It is therefore of no use to you.

  You should contact the manufacturer of your laptop, in your case, Toshiba and get the Windows 7 Upgrade in the time to take advantage of the offer.

  This is the upgrade Option:

  How does the Windows 7 upgrade Option?

  The Windows 7 upgrade Option is available through participating PC manufacturers on some PC and Microsoft on any purchase of packaged product Windows Vista. The Windows 7 upgrade Option applies to Windows Vista Home Premium, Business and Ultimate editions. Your upgrade to Windows 7 will be the comparable version: so you will get either Windows 7 Home Premium, Windows 7 Professional (upgrade to Windows Vista Business) or Windows 7 Ultimate, respectively. The Windows 7 upgrade Option program takes place June 26, 2009 through January 31, 2010. Some manufacturers may choose to shorten the time to upgrade Option.

  Unfortunately, it has expired.

  For more information about the offer, please contact Toshiba.

  ____________________________________________

  There are several methods to reinstall Vista, as you say you have problems with Vista.

  This can help you (download files and make your own DVDs):

  http://www.heidoc.NET/Joomla/technology-science/Microsoft/57-Windows-Vista-direct-download-links

  You can contact your computer manufacturer and ask them to send you a set of recovery disks.

  They should do this for a small fee.

  To reinstall Vista using their recovery disk/s, you start from the 1st recovery disk they provide and follow the manufacturer's instructions to reinstall:

  You need to change the Boot order to make the DVD/CD drive 1st in the boot order:

  How to change the Boot order in BIOS:

  http://pcsupport.about.com/od/fixtheproblem/SS/bootorderchange.htm

  "How to replace Microsoft software or hardware, order service packs and replace product manuals.

  http://support.Microsoft.com/kb/326246

  And if you have never received a recovery disk when you bought your computer, there should be a recovery on the drive Partition hard reinstall Windows how much you bought your computer.

  With a Toshiba, you press 0 (zero) to the starter to start the process of recovery back to the factory settings.

  And if you do not score a manufacturer of recovery on your hard drive, you should be able to make your own recovery from her disks to reinstall the operating system.

  Go to programs > name of the manufacturer of your computer > then their system or recovery tools software topics for them, depending on how it is formulated.

  If you can't find any reference to it, contact the manufacturer for advice on how to make these recovery disks.

  Some manufacturers have more available Vista recovery disks.

  If this happens, you may need to try this instead:

  You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.

  Other manufacturers recovery DVDs are should not be used for this purpose.

  And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs

  Here's how to do a clean install of Vista using a DVD of Vista from Microsoft:

  "How to do a clean install and configure with a full Version of Vista '

  http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html

  And once the operating system is installed, go to your computer manufacturer's website and get the latest drivers for your particular model or laptop computer.

  And phone Activation may be necessary when you use the above installation method.

  "How to activate Vista normally and by Activation of the phone '

  http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html

  See you soon.