Cursor (pointer) showing that hand (move tool) instead of pointer

Similar Questions

• Move tool > layer is locked error

  I have an image open in Photoshop CC (latest Version). I exported (command + E) another image from LR to Photoshop so now I have two files open in PSCC mode tabs. Last night I was able to drag with the tool move and put my mouse on the file header and drag it out of sight by tabs. Then I would move the mouse pointer in the body of the image (by the way, the two images are the same just different treatment and my goal here was to make a layer mask and paint in or on certain parts of the image). So I've done it a thousand times and today cannot.

  So when I got take my mouse in the body (not on the head) of the image, hold down the SHIFT key and drag, I get the coordinates instead of being able to move the image on the first photo where she would have two layers on the right and I get the message

  I also noticed today that my move tool is a + with the arrows in all four extremities. Maybe this has changed recently, and I have not noticed. I reset all the tools and brushes. Short of reinstalling CC, I'm puzzled.  Also in the upper part of my toolbar I disabled, Auto-selection and the selected group. It worked a zillion times before. Help it sucks! I get an error for locked layer. I've never had to play with layers of unlocking.

  I could always have to files side by side, I could simply drag one photo to another by using the SHIFT key, which makes 1 layer (new image slide) and another background image.

  Help!

  Hello

  I have not noticed the problems of synchronization during this operation. I just tried and held the mouse for a few seconds without a problem.

  You have not by chance a mouse without a wire with the battery, or a questionable left mouse switch?

  Dave

• PS CC 2014 Move Tool Bug?

  Hello

  After the update to the latest version of Photoshop CC 2014 patch, I noticed that the move tool does not work as it should.

  For this example, let's say there are 3 layers in my document.  The first layer is a background unlocked, 2nd and 3rd layers are small objects, say a circle and a square, respectively.

  I want to make my circle to a different location in my document, in order to make sure that my circle layer is highlighted, then click on my move tool to move it.

  Is where the problem begins: now, I make sure that my mouse pointing somewhere on the grounds of circle to move it all in now command or Option + command (depending if I'm duplicating it).  I used to be able to hover over what in my document.  I had no importance, as long as I wanted CMD key or Option, it would always move only my layers highlighted.

  Does make sense? If this isn't the case, I am able to specify if it is not explicit.

  Other info:

  iMac release 10.9.5 (Mavericks)

  Photoshop version: 2014.2.1

  I spoke (unnecessarily) with a person for help, but I've finally discovered that the developers know this topic and are currently working: Photoshop: move tool - select Auto Toggle shortcut changed.  They have known for at least a month, according to the timestamps on the pole.  Hope this is resolved quickly.

• When you use the pen tool when I click and create an anchor point and release the mouse button the pen tool emerges from the anchor and allow me to go and select a new anchor point. The right pen tool keeps adding lines that I move the mouse.

  When you use the pen tool when I click and create an anchor point and release the mouse button the pen tool emerges from the anchor and allow me to go and select a new anchor point. The right pen tool keeps adding lines that I move the mouse.  How can I get the pen tool to release the anchor

  Try this.go in the menus. Select cc illustrator > preferences > display selection & anchor > then make sure the box "activate the rubber band for" the pen tool is not selected. Then press OK. It should work.

• My cursor change of function to the move tool and without my wanting to scroll tool him. How can I stop this?

  The function of slider switches at will.  I go get a document online and use the slider or accidentally touch the mouse pad and the cursor will place you on the tool move and zoom or shrink my window at will or to scroll upwards or downwards. It happens constantly, needless to say that his exasperating. Please help me fix this so that the cursor is just an arrow cursor, I can scroll or go through other means.

  Hi caitlin77,

  1. did you of recent changes on the computer?

  2. how to stop this function?

  I would like you check the settings of the mouse on the computer and check if it helps.

  (a) open the mouse properties by clicking the Start button, then Control Panel. In the search box, type mouse, and then click mouse.

  (b) click on the pointer, and then under visibility Options tab

  (c) select the Hide pointer while typing check box

  (d) click OK.

  Check to see if that helps, and make sure that all the mouse settings are correct.

• I connected an external hard drive to my MAC pro. I want to delete a folder, but there is that no move to trash option shows the jury. Kindly help me on this.

  I connected an external hard drive to my MAC pro. I want to delete a folder, but there is that no move to trash option shows the jury. Kindly help me on this.

  In the Finder, right-click on the drive and select information. Under sharing and permissions have read and write privileges?

• I have my laptop can't detect a wireless adapter or access point. It shows that the network connection is excellent but I can't always connect to the internet.

  I have my laptop can't detect a wireless adapter or access point. It shows that the network connection is excellent but I can't always connect to the internet. It happened suddenly and with no warning or cause. I tried to turn off the modem for 10 seconds and turning it back on, but I still had the same problem. What should I do? Help, please.

  Hello

  Maybe this can help, http://www.ezlan.net/wireless.html

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• I installed the download tool usb/dvd windows 7, but after you have selected the iso file when I insert the USB stick and refrecing, it does show that "no usb drive compatible' what is the problem with my USB

  I installed the download tool usb/dvd windows 7, but after you have selected the iso file when I insert the USB stick and refrecing, it does show that "no usb drive compatible' what is the problem with my USB

  I have sandisk cruzer blade USB key

  Hi Rohit,

  Thanks for posting your query in Microsoft Community Forum. I understand that your USB drive is having problems of compatibility with your computer, but I would like to learn more about the issue in order to provide you with better assistance.

  1. You did it any significant hardware or change software on the computer before this problem?
  2. When do you get exactly the error message?
  3. Have you tried to connect to any other computer on this flash drives?
  4. Your USB key works on other computers or have you tried to connect to different USB ports on this computer?
  5. Is the pen drive getting detected in the case or you are able to access the drive folder in the window of the computer ?

  The question may arise if the currently loaded USB driver has become unstable or damaged, or if your PC requires an update for problems that could conflict with a device USB and Windows. This can also occur if your USB controllers may have become unstable or corrupt. So, I would suggest trying the following steps and check if the problem persists.

  Method 1:

  Please try the fixit (s) provided below which will help you solve common problems associated with devices and USB ports.

  • Hardware devices do not work or are not detected in Windows
  • Diagnose and automatically fix the Windows USB problems

  If method 1 does not work, try Method 2.

  Method 2:

  Remove and reinstall all USB controllers.

  1. Open Manager devices by clicking the Start button, click Control Panel, click system and security, and then, under System, clicking Device Manager. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  2. In the list of the categories of equipment, locate and expand Bus USB controllers.
  3. Right-click every device under the Bus USB controllers node and then click Uninstall to remove them one at a time.
  4. Restart the computer and let the USB controllers get reinstalled.

  Plug in the removable USB device and test to make sure that the problem is solved.

  If the problem persists, go to method 3.

  Method 3:

  This method will install the latest drivers from device to your USB device.

  1. Click the Start button, type Windows Update in the search box, and then click Windows Update in the results pane.
  2. Click find updates. When the scan finished, click optional review updates.
  3. Click the check box next to the update, and then click install updates.
  4. If you are prompted, read the license agreement, then click I agree.
  5. Follow the instructions on the screen to download and install updates.
  6. If you are prompted, restart your computer.

  More information: Update a hardware driver that is not working properly

  Hope this information is useful. If the problem still persists, please post back for further assistance, we will be happy to help you.

• Parental controls for music/movies/TV shows that have been downloaded

  Windows Media Center:

  Is there a way to add parental controls for music/movies/TV shows that have been downloaded if they have the xml file with the sides included?

  Hello

  There is nothing in Windows 7 by default, adding parental controls to shows or downloaded movies.

  You will need search for 3 third-party software that will do what you want.

  Warning: Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  Hope this information is useful.

• Unable to get the move tool to place a photo at the top of the page another

  Hello people,

  I am aware that I'm really a newbie to Photoshop (but methodically working my way through Kelby Photoshop 6 for photographers tackle this CS), and I also know that I am a fool at the same time. However, it is time to put my hand up and admit that even the simplest of tasks is beyond me.

  Use the CC version, I have two pictures open in a document. Actually I'm following one of the lessons of Kelbys of Chapter 9. The two images have the same group of three folk poses, same etc, the only difference is that one picture, the guy is looking for the camera in the other, he seeks right to it. The lesson is to place the other photo on top and using a brush and a layer mask to reveal the image where he looks at the camera.

  Seriously, I have tried for 3 days to use the move tool (V) click and drag one photo to the other, but it won't happen just for me. I also tried with my own images, still no difference. This work will be if I use Select-Select All, then copy and paste a picture on top of another, so all was not lost and I can finish the lesson, but my inability to get the move tool to drag and drop gives me major pain.

  I'll be very grateful if anyone can put me out of my misery - like I said I can be a good fool sometimes. A virtual beer to the person who can help you!

  Best wishes

  David

  OK, I assume here that you have opened both images that everyone is in its own document. By clicking on the tabs on the top screen between the two documents and the two images switches have only a single locked background layer.

  You are right in saying: select all, copy, and then paste. It's a way.

  However with the active object (lowercase v on the keyboard) tool, you can place the cursor on the image, hold down the mouse button and drag this image into another tab. While the cursor is on that tab (you're still now on the button of the mouse) documents will pass. At this point, you can now drag toward the center of the document and finally let go of the mouse button.

  If this isn't the case, please post a screenshot of your screen so that we can see how you have photoshop set up. As can the tabs are not visible for example.

• FF28 upgrade & all the addons are showing that off, even if they are enabled

  Upgrade to FF28 & addons all + userscripts show that disabled, even if they are enabled.

  I already tried to delete:
  addons. JSON
  Compatibility.ini
  Extensions.ini
  Extensions. JSON
  Extensions.SQLite

  All that done as a cause of Firefox go in a "reboot several times 50 times more than one by one and each time asked me to manually install each addon. The process took more than 5 minutes and left me very impressed by the ability of Firefox bugs.

  End result? I am still sitting with the same problem. All the addons are showing that off, when they are turned on in fact. I cannot change them, uninstalled them or install new addons.

  PS. Oh and I write of Sleipnir not Firefox because Firefox has refused to work with the buttons on this page for some reason any (yes I'm allowing scripts in NoScript)
  PPS. Oh and my old account here for some reason some refused to open a session, even though I wrote the user name and password and I tried using the user AND email for the login process. Overall, very impressed with the services of Mozilla for now. I really want to move to a different browser.
  PPP. I have over 300 tabs open in Firefox, so can't go on the road to reset, because Firefox has no way to record a session.

  Honestly, Firefox must be transportable by default. What the point of having a browser that you spent 12 months + customization with 300 + tabs open, if your Windows partition is damaged and you cannot retrieve your tabs because it is installed? I will never use the installed version of Firefox again because it is impossible to save. If I had been using portable Firefox at the time where I could have accessed my XP partition corrupted with Ubuntu live USB, back up the folder and be good to go on my new install of Windows 8. Instead I had to start from scratch. That's what you get for not using of portable software.

  This is resolved. The steps that I followed:

  1. Ignore all the Internet advice and find a way to do it myself because no one else seems to know anything about Firefox.
  2. Save the entire Firefox portable folder making it a 7zip file
  3. Disable all addons
  4. Download the latest mobile Installer
  5. Install using the portable Installer but navigate up to the existing installed cell phone directory
  6. Open portable Firefox after updating
  7. Update all addons (do not select all again)
  8. Restart Firefox
  9. Now activate the addons, then restart Firefox

  Note: installing addons now I find that I can't add using the button 'Download' for the addon, I have to copy the URL of the button, paste it in a new tab and press enter

• Bug using move tool in PS CC 15.1.2

  He worked on it with the cat today and he couldn't even understand that I was just trying to move the position of my image on the page. It seemed stuck on the idea that I was trying to move it to another document.

  iMac

  Model identifier: iMac17, 1

  Processor name: Intel Core i5

  Processor speed: 3.3 GHz

  Number of processors: 1

  Total number of Cores: 4

  (By heart) L2 Cache: 256 KB

  L3 Cache: 6 MB

  Memory: 16 GB

  Boot ROM version: IM171.0105.B07

  I used the CC since its creation, and I've never had this problem until the last update.  I use the latest version of PS CC. 15.1.2

  

  The hand tool, down at the bottom of the toolbar in the left-wing movements, the entire document in the document window PS by default only if the image is enlarged bigger than the window.  You can do the same thing with the scroll bars if they exist.  As gener7 said below, you can turn on Prefs / tools / module to activate your document beyond the edges of the Pan drag PS document window.

  The move tool, the four arrows icon, near the top of the toolbar, move the layers selected in the document canvas that does not have transparency if there is no content of the layer below.  It still works as it always has, I think.  You can lock a layer so it won't drag with the move tool.  You can select all layers to move as a whole.

  Perhaps the hand tool does not work how you're used to work by being able to drag the document outside the document window, you think the move tool is somehow the hand tool.

• How to show the name of Manager instead od managerId in the hr schema

  I have a requirement,

  I use oracle xe database to connect to the hr schema, I created EmployeeEO, EmployeeVO,

  in the user interface, I want to show the name of Manager instead of ManagerId, the problem is that both come from the same table.

  How to fully complete this requirement, buy using the capabilities of the ADF without doing any coding (also search)

  Hello

  You will need to create a ViewCriteria in EmployeesVO based on the EmployeeId that receives a parameter. Next, you will need to go to the tab of the accessors for EmployeeVO and add a new pointing to EmployeesVO. Then edit and shuttle to the ViewCriteria to the right and in the inputParameter for empId you write (or select) ManagerId. In this way, that this accessor class will always be information of your manager.

  Then create a transitional attribute with the value of the following expression: yourViewAccessorName.first (). = null? "yourViewAccessorName.first () .getAttribute ("FirstName") +" "+ yourViewAccessorName.first () .getAttribute ("LastName"): '"

  Hope this helps

• problems with 2015.1 - not so recent recent files, cmd + marquee move tool option automatically selects top layer...

  Hello buddies.

  I'm digging the new interface and all that. the air is smooth. No matter what.

  have the following two problems... ask yourself if I am failed to adjust some new settings or something...

  (1) recent files: recent sentence. is not up-to-date. does not display the files last I opened or saved. what it shows is a bit random, really.

  (2) you know that medium to access the move tool marquee tool + cmd? Well now it selects automatically the top layer of most. I tried to find a way to make this wide, but do it in the real move tool options has no effect on this. What can I do? It comes as the tool #1 alt I use! He kills me. I really want to Karate chop my computer! :-D

  Thank you!!! Happy Friday.

  one

  These two issues are bugs which are followed by engineering. We are working on their fixed.

• How do I get the scissors on my move tool feature?

  Watching a video tutorial. They had me to choose a soccer ball with the elliptical tool. I was able to do. Then they said using my move tool, I could keep the soccer ball. They also said that I would see a pair of scissors next to the slider. Mine do not, or if I could move my selection. Can someone help?

  You will see the scissors with the tool around if you have the cursor in the selection. to be moved.