Cursor spontaneously jump instead of random text when entering.
It's maddening. My cursor jumps randomly to a place randomly in Windows 7 whenever I type... I end up having to locate where there jumpted when my slot is more tape my text, back out the junk in the place text at random, back to my slot and continue typing.
This happens CONSTANTLY... and it's okay if it's Word, Notepad or a textbox on the form online.
(FYI, it is not the laptop mouse pad. I experimented to the breeding of the Palms above the keyboard to see if it still happens. Although a uncomfortable test, I could clearly exclude this as the source of the problem... what happens even when I am nowhere near the pad).
Bill2010 salvation
Welcome to the Microsoft Answers Forum!
1. start the clean boot computer in order to verify if any third-party application is at the origin of the problem. To help resolve the error and other messages, you can start Windows by using a minimal set of drivers and startup programs. This type of boot is known as "clean boot". A clean boot helps eliminate software conflicts.
How to run check and clean boot if you have the problem.
i. Click Start, type msconfig in the search box and press ENTER.
II. If you are prompted for an administrator password or a confirmation, type the password, or click on continue.
III. in the general tab, click Selective startup.
IV. under Selective startup, clear the check box load startup items.
v. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.
VI. click OK.
VII. When you are prompted, click on restart.
VIII. after the computer starts, check if the problem is resolved.
If the problem is resolved, check what is the cause of the problem, referring to the link given below: http://support.microsoft.com/kb/929135
Reset the computer to start as usual
When you are finished troubleshooting, follow these steps to reset the computer to start as usual:
i. Click Start, type msconfig.exe in the start search box and press ENTER.
II. If you are prompted for an administrator password or for confirmation, type your password, or click on continue.
III. on the general tab, click the Normal startup option and then click OK.
IV. When you are prompted to restart the computer, click on restart.
2. change the settings of the device mouse
i. click on the Start button
II. click on Control Panel
III. click hardware, click mouse.
IV. click the pointer Options tab, clear the Hide pointer while typing of box.
3. update the driver for the mouse, you can see the below link for the same thing: http://windows.microsoft.com/en-us/windows7/Update-a-driver-for-hardware-that-isn ' t-work properly
Thank you, and in what concerns:
Samhrutha G S - Microsoft technical support.
Visit our Microsoft answers feedback Forum and let us know what you think.
Tags: Windows
Similar Questions
-
Why I have problems with my cursor randomly jumps to a random location when entering?
It's maddening. My cursor randomly jumps to a place randomly on Windows 7, whenever I type... I wind with locate in jumpted when my slot is no longer type my text, back out the junk in the place text at random, back to my slot and continue typing.
This product CONSTANTLY all the 100 characters or so... and it's okay if it's Word, Notepad or a textbox on the form online.
@Bill2010 only! =>
Please report all further follow-up replies to your new thread in the forum of the Performance-online http://answers.microsoft.com/en-us/windows/forum/windows_7-performance/cursor-spontaneously-jumping-to-random-text/2a986a8e-2d82-4c25-acf2-5f09233602c5
TIP: If it's a laptop, be sure not accidentally brushing the touchpad with the fingers or inadvertently press the Ctrl, Alt and Fn keys you type.
-
Re: Tecra M11 - cursor jumps to random locaation when entering
Does anyone know how to turn off the trackpad when you use a mouse, or advise on what the problem is - when I type happily away and I'm fast enough, I suddenly find I type in the middle of what I typed already, instead of at the end of the line as usual. I can't work if there is interference from the trackpad, or I'm hitting something else in error! I tried to turn off the trackpad by using Fn F9, but it doesn't seem to work... there at - it another way to disable it?
Congratulations to all!
------------
AmoebaAkuma is right. Turn off the touch pad using the FN + F9 key combination and check if it happens again.
-
When you enter text in a form, that the cursor often jumps before the entered character
Samsung Galaxy S3 i747m
71 of Firefox and beta (good example, the 7 was presented at the 1, and I had to reposition the cursor)
Swype 1.3.5.x (tried with stock AOSPS keyboard, same result)
The cursor often jumps back from a position when entering text in a web form. This makes entering the numbers and passwords about Impossible. I can reproduce this error regardless of keyboard.iamjayakumars which will not help.
We have made several changes to the keyboard input in Firefox 19 and 20. You should be able to find 19 Firefox in the game store as Firefox beta Friday of this week.
-
Just upgraded to Windows 7 to 8, using MS Office Word 2010, worked well on Win 7, but now type text and the cursor suddenly jumps into the existing text and continues typing, rather than the finish line that I'm on. Thought, I was accidentally touched for touch pad or other keys, so now consciously look for this but can find nothing on my part. Have experienced it before with a processor OS Linux and Open Source, when the OS has been updated. Think there may be a loophole to WIN 8. It also happens when keying in the screens like this, that has happened twice while here. Someone else spotted the same thing? Or is it just me?
Also, anyone know how to disable "Open Tap" on the Mouse touchpad of the notebook, its annoying, I could disable in WINDOWS 7 but cannot know how Win8.
Thank you very much for your help, the setting was not really there, but you gave me the name of the device, so I was able to download the right driver from
http://www.Synaptics.com/resources/drivers
above mentioned just in case anyone has the same problem. The site recommend to go with the hardware vendor's website, but ASUS has wrong driver, one of the above works fine.
Its such a relief to be able to settle this problem - THANK you
Lets see if it sorts the problem MS Office too.
-
How do you define boundries when entering text?
I'm using Elements 5.0. Is it possible to limit the text when entering in a defined area. Can't seem to find anything like a bounding box that prevents 'leaks' on the side/s of the image. Nothing compares to the margins in word for example?
Thanks for any help!
What type of paragraph?
With the text tool selected, draw on a paragraph box as well as the text are not going outside the bounding box.
http://www.Dummies.com/how-to/content/create-paragraph-type-in-Photoshop-elements-10.html
-
When you type text, cursor jumps suddenly to a point in the text already entered. Use Ctrl Z to recover. How to stop this?
I use Windows 7 on a Dell Inspiron.
I recently did a "clean boot" who has cured a problem of high CPU usage, but left me this cursor jumping problem. I have to look at the screen as I type to be aware of these breaks that often occur at random.
Hello Malcolm,
Yours is a laptop? If so, you're probably brushing the touchpad with your Palm or fingers. The easiest way around this problem is with an external mouse with touchpad disabled. To disable the touchpad go to control panel, Manager of devices and look under the mouse or HID for her. Then, right-click on it and select Disable (not uninstall - it will reinstall itself only if you do).
You can also connect an external mouse and select the option for Notification of Touchpad to disable the touchpad when an external mouse is present. This setting can be found in the mouse properties dialog.
Let me know if this solves the problem for you.
Kind regards
BearPup
-
I have a problem with the cursor jumps when entering text.
Original title: cursor jumping when entering text
I use Microsoft 7 and the cursor keeps jumping when I type. This causes the text to be misplaced. Some answers I've seen only direct you to the hardware options but never directly any specific solution. Grateful for ideas?
Hey Joe,
Thanks to join Microsoft Community where you will find all the required information on the Windows operating systems!
The problem may occur due to the speed of the pointer mouse inappropriate or if the sensitivity of the touchpad is too high.
To help you better, we need more information.
What is brand and model computer?
To work with the issue, I suggest you follow these steps:
Method 1: Hardware store
Open the hardware and devices Troubleshooter
http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter
Method 2: Update mouse drivers
Updated a hardware driver that is not working properly
http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly
Method 3:
Change the settings of the mouse pointer.
Refer to section to change the mouse pointer works on the site:
Change the settings of the mouse
http://Windows.Microsoft.com/en-in/Windows7/change-mouse-settings
Method 4:
If you use a laptop, change the sensitivity of the touchpad.
See solving problems with your touchpad in more options in the site:
Mouse, touchpad and keyboard with Windows problems
http://Windows.Microsoft.com/en-in/Windows/help/Mouse-touchpad-and-keyboard-problems-in-Windows
I hope this helps. If the problem persists, or if you have problems of Windows in the future, let us know and we would be happy to help you.
-
Problem: Cursor constantly jumps around while I'm typing, auto deletes text, etc.
The changes that caused the problem: Hard drive has failed and replaced
Model: HP Pavilion dv6
Windows Edition: Windows 7 Pro OA
Processor: APU A10 - 4600M with graphics Radeon (tm) HD 2.30 GHz AMD
Memory: 8.00 GB
System type: 64-bit operating system
Feather: No pen or touch input
Mouse: By Device Manager - mouse Compatible PS/2
Keyboard: By device - Standard PS/2 keyboard Manager
Thanks a lot for all the help that can be provided!
JReid76,
Try to install this driver Synaptics, let me know if it installs correctly or it fails. It is a specific driver for your touchpad.
Please answer as soon as possible.
Thank you
-
If you type problems.__Since the upgrade to windows 7, my cursor keeps jumping when I type. In the middle of a Word, he jumps back in the middle of a previous sentence. __Can help you!
Since the upgrade to windows 7, my guard slider on jump when I type. In the middle of a Word, he jumps back in the middle of a previous sentence.
Can you help me?On Saturday, April 10, 2010 15:46:31 + 0000, dolcevita53 wrote:
> Since upgrading to windows 7, my guard slider on jump when I type. In the middle of a Word, he jumps back in the middle of a previous sentence. Can you help me?
This has nothing to do with Windows 7 in particular, if it is on
a laptop computer, that behavior gives strongly suggests that you are accidentally
brush your hand against the touchpad when you type.
Ken Blake, Microsoft MVP (Windows desktop experience) since 2003
Ken Blake -
Cursor moves when entering text
I am usuing editing field, but when I type any text in this field, then cursor does not move with the text, it's show into typed text, but the position of the cursor is on start.
I use 6 Os and Os 7/7.1.
Please let me know for the problem.
Hi simon,.
I found the solution for it, I change the cursor by using code in the following onFocus and onUnFocus methods:
setCursorPosition (getText () .length ())
Invalidate();
Return super.onFocus (branch); For the onfocus method
Return super.onUnFocus (); Method onunfocus
-
my cursor keeps jumping everywhere when I type. How to stop this.
My cursor keeps jumping everywhere when I type. How can I stop this?
Hello
Because the keyboard is integrated in the casing of the laptop, just the vibration caused by typing can cause the touchpad the cursor or initiate a click, depending on sensitivity settings.
You must disable the touchpad when typing. Most modern laptops provide an option or a keyboard shortcut to get there.
The following keyboard shortcuts have been known to disable the touchpad on different systems. N Fand hold and then press F4, F6, F7, or F12 to disable the Touchpad.
Specific instructions, read the instructions for your system or contact the support of laptop manufacturers.
Concerning
-
When I scroll with the wheel of the mouse Microsoft Wireless Mobile Mouse, it jumps instead of sliding to the bottom of the page. It ignores even the large amounts. This can be solved? Rose
Hi Rose,The problem occurs on specific applications?This can be for one of the following reasons:1. bad mouse is selected in the IntelliPoint software.2. conflict with other mouse or pointer (non-Microsoft) software.3. problem with IntelliPoint software or drivers.4 application does not correctly recognize scrolling the mouse messages.I suggest for the link and follow the steps in the KB article:The problems with the mouse button or scroll the parametersNote: Put the computer to normal mode after the troubleshooting in clean boot mode.Hope this solves the problem. If the problem persists, you can write to us and we will be happy to help you further. -
When you use the metro apps the computer displays a black background instead of a text being illegible white
So basically I can't use the metro beyond the home screen interfaceKnow of a solution:Usingi7 processor640 m GPU NVIDIA6 GB memoryIt could be a driver problem or there at - it an option to changeYou have FXAA enabled in the NVidia Control Panel? That was the problem for me.
Otherwise, just click on restore in Control Panel and it should fix the problem. -
Why my cursor always jumps around when I type?
My cursor started jumping to a line or a previous word, as I type & I have to constantly watch & fix
If you have a laptop with a touchscreen which is usually the cause. A way to eliminate there is an app called touchpad pal.
Maybe you are looking for
-
Dear Sir I don't know why my Laserjet M1217 display screen 'Used in use offer', could you please kindly tell me what happenning to my printer. Thank you very much.
-
ListField &; searchable feature
Hello I wrote a class for managing a ListField, but I can't view the searchField by using the function 'setSearchable '! import java.util.Vector; import net.rim.device.api.ui.*; import net.rim.device.api.ui.component.*; import net.rim.device.api.syst
-
I just bought a new computer and is not recognize my printer. I now have windows 7
I just bought a new computer and is not recognize my printer. I now have windows 7. Need answers please. Thank you.
-
Tabular form - how to upgrade by with user access
Hi allI created a tabular presentation with 20 columns editable with MRU and DSM.Now, I need to update column of database user connection apex for the updated records. How can I achieve this?Thanks in advance...Thank youChandra
-
Downloaded update two days ago. Now the menu bar icon is grayed out. When you click on it there's only an icon of spinning. Quitting smoking is grayed out and help and Open Window do nothing. There is no way I can see to do a force quit.I tried acces