power supply used in use

Similar Questions

• Using Powershell V3 to change the status of the power supply using WS-Management through iDRAC (PE r.620)

  Hi all

  I've been playing with WS-Management on the DRAC with PowerShell V3. I wanted to try to see if I could do the simple things. The task that I started has get and change of power on a PowerEdge r.620 State. I thought it would be fairly easy...

  Theres a lot written on this topic, but the examples from here

  http://en.community.Dell.com/TechCenter/systems-management/w/wiki/4374.how-to-build-and-execute-wsman-method-commands.aspx

  and here

  http://en.community.Dell.com/TechCenter/Extras/m/white_papers/20206146.aspx

  both use WinRM in their examples

  I find it quite difficult to understand how I would achieve the same results using WinRM, but using the new v3 PowerShell cmdlets (get-CimInstance, New-CimInstance, Set-CimIntance, Invoke-CimMethod, etc.)

  I'm ok, get the basic information from the DRAC using these commands, but I must admit that I am a little lost in how to manage things from the endpoint reference (EPR). Each example of WinRM speak back EPR, then using those of the WinRM method call, but I just can't see how to do this with the new PowerShell commands

  IM asking if someone did or has examples of how do?

  It would be great if the authors of these documents could provide examples in PowerShell v3

  Hello jaydee180

  This document contains examples for powershell v3:

  http://en.community.Dell.com/CFS-file.ashx/__key/CommunityServer-components-postattachments/00-20-18-70-55/Microsoft-Windows-PowerShell-CIM-cmdlets-with-Dell-iDRAC.PDF

  Thank you

• Laptop HP COMPAQ power supply used on

  So I was waiting for my laptop at the end of the updates and I was about to turn on again when it suffice to stop and gave me an orange light on the side where the charger goes, instead of a blue light.

  I don't know what its from. It doesn't. When I press the power button, the orange light flashes.

  Tilted on its side when you perform updates because I wanted no more heating.

  that could play a role.

  I tipped it on its right side. He lost for a good 20 minutes.

  Any help?

  Thank you

  Try to remove the battery. Plug in the power adapter and press the power button to see if it lights.  If your laptop doesn't work with only the adapter connected, then either your power adapter, connector dc where the adapter plugs into the computer laptop or systemboard itself may have failed. You can test the connector when it is plugged by moving it gently to see if there is no change.

  Is your laptop still under warranty?

  It have tilted on the side would have no effect

• Help: A power supply using labview programming

  I recently saw entrust the task to our diet TDK Lambda with Labview programming work. It is IE to be able to set the voltage of 16V to 18V and adjust it back by 1 V every minute for an hour. No idea where to start, because I'm a bit lost?

  a bit of code to help you get started...

  

  of course, this reinforces the tension only and not launch into it...

• Control via RS232 interface labview DC power supply

  Hello world!

  I'm new to labview and I'm trying to control a DC power supply using a serial RS-232 (output voltage). I can't use an interface Gbspecifications TO have only a single module that is used for another task. Any advice on how to go about it in labview?

  Thank you very much!

  Find the driver for your device here: http://sine.ni.com/apps/utf8/niid_web_display.download_page?p_id_guid=510F94BB50256F51E0440003BA7CCD...

  It will work for GPIB or series with VISA.

• Power supply of database patch silence installtion

  Hello
  I have to apply database Jul 12419331 PSU on sub databases. I'm going with silent install (apply patch - silence) and need all steps in a script.
  
  Made Oracle gives a script automated for silent instaltion patch.
  
  Server:
  64 - bit sparcv9 kernel modules
  Have 2 databases
  
  Database:
  
  -Select database v$
  platform: Solaris [tm] OE (64-bit)
  -Select * from version $ v
  Oracle Database 11 g Enterprise Edition Release 11.2.0.2.0 - 64 bit Production
  PL/SQL Release 11.2.0.2.0 - Production
  CORE Production 11.2.0.2.0
  AMT for Solaris: 11.2.0.2.0 - Production Version
  NLSRTL Version 11.2.0.2.0 - Production

  Salvation;

  You have the grid? If so, that you can follow the note below to automate

  Application Oracle Database power supply using procedures of deployment in MS [ID 864316.1]

  See also:
  http://blogs.Oracle.com/gridautomation/entry/revisiting_patch_management_-

  Respect of
  HELIOS

• How to use the Camileo H30 with Power Supply

  Hello

  First: Excuse my English, im from Germany ;)

  I have a Camilio: 30. its has been purchased used. I've only had the camera & the original battery.
  No supplements (such as usb or power supply cable original)

  what I want: I need to shoot for a few hours. The battery is unable to do. so I want to use it with a block of power, but when I put in (throughh a mini-usb connector) of the camcorder goes into charing (no actions are possible), but I want to make full use of the feature when the power is connected.
  How should I treat it?

  I got an a 2, 25 a 5V power supply, I think its enough... or not?
  The label on the side of the camcorder bottum said 5V 2A...

  Thanks 4 help me :D

  Greetz

  Hello

  If the Camileo H30 and I got this camcorder with battery and adapter supporting USB mini jack.
  The s AC adapter camcorder supports the release of 2A and 5V
  Its model DSA-10 p-05

  Google for this model, maybe you could get one from some dealers online
  Otherwise recommend that you check the other adapters supporting these values.

  For example this one:
  http://www.toshibadirect.com/TD/B2C/Adet.to?poid=484958

• HP 8200 elite CMT: can I use an external power supply for AMD Radeon HD graphics card 7770?

  I have HP 8200 elite CMT CPU in which 320 watts PSU is installed. I want to use AMD Radeon HD 7770 requiring more power (minimum 400 watts power supply) for maximum performance. But the fact is, the higher Watt PSU is not available for my cpu because its cables do not match that. So I ask if I can use the external power supply to power my GPU instead of the CPU power. Will be this harm to my PC?

  Kindly help me to solve this problem.

  Thank you

  Thank you for the information, @haseebkhan7310.

  I'm not a fan of using a separate power supply to power a video card.  It can cause problems.  However, here is a video that will show you how it can be done:

• Power supply for use in the UNITED Arab Emirates

  Hello

  I just bought a Time Capsule of the airport and an Apple TV (4th gen).  I'm moving to Dubai for work and I intend to take with me.  I can't find out how to replace the power supply for use in Dubai (plug type G).

  • Can I just buy a travel voltage converter?
  • What is the frequency difference (US is 60 Hz and UNITED Arab Emirates is of 50 Hz)?
  • Could I just buy a 'EnergyPal travel Charging Station ETCS04' and connect directly?

  Thanks for any help!

  The airport Time Capsule and the Apple TV work on 100-240 Volts and 50/60 Hz automatically, so they'll work pretty much anywhere in the world if you have the map of the right ankle.  A voltage converter is NOT necessary.

  You can buy the cards you need to any store from the airport, luggage, in Dubai store, etc., most of the hotels the.  If I remember correctly, Dubai uses the same type of plug that she used in the United Kingdom, as well as should work as well.

  http://www.Amazon.com/Ceptics-grounded-Universal-Plug-adapter/DP/B0080R95XI/ref= sr_1_1? ie = UTF8 & qid = 1455557366 & sr = 8-1 & key...

  I do not think that the higher 5 GHz channels are permitted in Dubai, so be sure to put the time Capsule to use a lower numbered GHz 5 channel... 36, 40, 44 or 48.

• Satellite P100-347 does not stop when it is used on the power supply

  I have a new laptop of P100-347 games and I have 2 problems. Can anyone help?

  (1) when I use the usb port on the left side of the laptop, the laptop seems to restart the same time that I plug anything into it! I called Toshiba and said to update Bios, so I did (version 240 up to 330). But as soon as I did it started to the following problem:

  (2) when I run the laptop on battery, I can turn off the phone by pressing the power button or by clicking the windows locked. But as soon as I plug the power supply whenever I want to stop the laptop, the laptop just restarts. Does anyone have any ideas?

  Thanks for the comments!

• Can power supply Question - I use the 230W power supply with a W540?

  I have a W540, which currently uses a power 170W (8.5 a 20V)

  I got also a docking station for a P50 that has a power of 230W showing 20V 11. 5a.

  The connectors are similar, but I'm hesitant to try the 230W power supply in the W540.

  It is allowed to use the 230W power supply with the W540?

  230 watts is maximum power feeding, it only provides the energy required by the computer.

  I sold my W540, so I can't test it for you. But I do use the ThinkPad X 1 carbon with 230 watts without no problem power adapter.

• Can I use a power supply from 14 to 15 volts DC with my computer

  so I bought a p2-1013 desktop computer it has an apxd1-dm, the card mother itx micro with a continuous supply, integrated on the map.

  in the description it says it needs a 19 v dc power, but I think that the jury needs 12v and 5v to operate so the provision would naturally be able to offer both voltages to 14-15 volts.

  my questions are so

  1. the Council use something higher to 12v or need something more?

  2. is the continuous converter designed to not be able to correct the fluctuations of tension? (PWM with no correcton feedback)

  3. does anyone think this will work?

  probably a rather strange question, its for a school project.

  any help would be greatly appreciated

  Thank you

  1. the Council use something higher to 12v or need something more?

  No, the Council should not should eat something higher to 12volts. Common computer voltages are 12v, 5v, 3.3V and lower for the processor and the memory.

  2. is the continuous converter designed to not be able to correct the fluctuations of tension? (PWM with no correcton feedback)

  The computer is basically a laptop computer in a matter of funds. Any laptop I've owned uses a power supply AC/DC with an output of 18.5 to 19 volts DC @ about 3.5 amps.  This configuration is tested... it is known to work. The section of DC-DC on board probably includes dividers voltage and voltage regulators for most of the functions with PWM for the CPU and memory circuits.

  3. does anyone think this will work?

  Honestly, I don't think you'll have a bit of luck you try to run the computer on 14-15 volts DC.

• 1V - 5v linear output using power supply 5v, voltage divider, and variable resistance

  How can I get 1v - 5v output linear using power supply 5v, voltage divider, and variable resistance?

  Have the you wired as an attachment?  Using my schema, you can calculate the current flowing through the pot based on the fall of the tension in the pot

  4V / 10Kohm = 0.0004

  Kirchhoff's current law, we know that the same current flows through the circuit so now we can calculate the leg below the wall, based on the current and the fall of desired voltage across the resistance

  1V / 0.0004 A = 2.5 K Ohm

  My scheme maintains the current flowing through the circuit of constant, so the voltage divider must never change.  Assuming a linear pot, you will get a swing of such linear voltage as measured at the wiper.  If you wired the pot, a different way, then more then likely, you change the total resistance of 5V ground that would have the common effect that would effect the tensions.

• power-supply re-use

  Hello

  I'm trying to give a new life to my good old Compaq Presario Windows 95 computer. Is to use the wardrobe and the power (+ 12V, + 5V, both very interesting) for a project which I was buy a power supply anyway.

  So I thought, let's give a new life to this old beast. AF TI less safe environment to another part of e-waste.

  Furthermore, food is a MITAC SPU-75.

  I am aware that the reuse of PC power supplies requires generally a few rules to follow. There should be a charge on the + 5v and of the connecting leads must be grounded to convince food it is supposed to be 'on '.

  That's what I thought until I tried with this little beast. Being an old Compag connectors are not standard, 2 x 6-pin.

  Anyone has any experience in re-using this type of diet?

  Kind regards

  Reinhold

  I thought about it!

  I have connected the white wire to the orange wire and put a lamp halogen 12V 20W load between + 5v (red wire) and GND (black wire). Then - so it's important - turn on the switch on the rear of the unit. Voila, now it works!

  PROBLEM SOLVED!

• OfficeJet Pro 8500 a-green power supply light on-Quit printing using as a copier

  I was using the printer as a copier, placing documents on the glass and close the cover.   About 8 different documents, then the printer just quit so that, in the middle of printing a page printed.   Green power light is on, but when I push it, it is not off. Touch control panel does not respond.  Nothing seems to function.   Tried to unplug the power cord at the back, unplug the unit from the wall and disconnect the power supply cord.  Plugged everything back in after about 10 minutes to be disconnected and no help.  Green power light turns on but no function doesn't seem to work.  Have windows 7, 64 bit HP computer, but the copier function should work even if not connected to the computer.

  Appreciate any help.   Thank you

  Carl

  It seems that the firmware may have had a fatal error occurs. I'm afraid there is little you can do to solve the problem. Try the procedure described in the document below. If this does not work, you will need to replace the printer.

  http://goo.GL/aNuHW