Custom authorization scheme management has no errors

Similar Questions

• Install streets & trips 2013 on windows 8 - "a licensing initialization error has occurred. Please contact customer support for further assistance. Error 0xC004D301 ".

  Original title: new installation of streets & trips 2013 on windows error 8.

  I have my windows 8 installation with the assurance that my products purchased from Microsoft survive the 8 Windows Reinstall "refreshed". Well all the Microsoft products were there but would not work. Each gave the error for rerinstall the product I did no problem except for the problem with the streets of travel & which still exists and is completely ignored by Microsoft, according to my research. The error is: "a licensing initialization error has occurred. Please contact customer support for further assistance. Error 0xC004D301 ". I tried all the suggestions that I have met on the internet. The most galling was given by Microsoft technology in its response to this problem. "The license data is probably corrupted" OK, makes sense, BUT how can I fix that you genius. Someone had managed to get the program to work after this error message?

  Success!  Hi John, I don't know if this will solve your problem because I am running windows 8.1 and tries to install streets & trips 2011.  But I had a similar symptom that you knew.  Here's what I did: just right-click on the icon in the start menu, select programs and features.  Uninstall all versions of Microsoft Visual C++ 2010, I had two.  Then I opened the installation dvd in Explorer, click right on dvdrun, marked the area run as long as administrator (not sure if it did anything or not), hit apply, then double clicked on dvdrun and everything worked.  I could install, validate, save, and run the program!
  A warning, I don't know what are the potential problems that may result in removing these two programs, I hope that if I run into something I can install them again without too much trouble.

• Save the attachment script gives error "Mail has been a mistake: AppleEvent Manager has failed. ' number - 10000

  Hi all

  I'm completely ignorant when it comes to Apple Script and I'm trying to get this simple script to work. The purpose of the script is to save attachments in a folder named when I run on the Apple Mail messages via a rule.

  This is the code:

  Tell application "Mail".

  theMessages set of selection

  Repeat with thisMessage in theMessages

  the value of the theAttachments attached to a letter of thisMessage

  Repeat with thisAttachment in theAttachments

  the value theAttachmentFileName ((chemin d'accès àle texte riche de la règle de type dossier de départ) & ' treatment of the Documents record: Hazel ") & name of the thisAttachment

  Save thisAttachment in file theAttachmentFileName

  end repeat

  end repeat

  tell the end

  
  

  The folder does not exist, but I get a "error " Mail has been a mistake: AppleEvent Manager has failed. ' number - 10000 "when I run.

  The code in the Script Editor editor also inserts "type of rule" in my code, so I guess that my syntax is faulty.

  Any help would be greatly appreciated.

  Kind regards

  Beem

  If ' folder of treatment of Hazel ' already exists in the Documents folder, the following script of GUI, which seems to work perfectly under OS X 10.11.3, should do what you ask for:

  Try

  game of theDestinationFolder to ((path to the documents folder) as text) & "Hazel treatment record" as alias

  on error - file does not exist

  return Beep 3

  end try

  say application "Mail".

  activate

  the value theMessages to the selection

  Repeat with thisMessage in theMessages

  thisMessage Open

  say application 'System events' to say process "Mail".

  click on menu item "Save attachments...". " of 1 of the 'file' menu bar item menu of the menu bar 1

  Repeat until sheet 1 window 1 is

  end Repeat

  key sequence "o" using { control down,shift down}

  key sequence "Nutty".

  click on button 'Save' of the sheet 1 of window 1

  Repeat while sheet 1 window 1 is

  end Repeat

  key sequence 'w', using {control down} - close this message

  end say

  end Repeat

  end say

• WIN8 64bits - Recovery manager has stopped working error message

  Hello world. Just bought a computer laptop 1310sa m6 with envy. I tried to create a rescue disk set by using the Recovery Manager. It does not start, just gives the error message "Recovery Manager has stopped working." and then informs me that windows is collecting information and inform me a solution... Being that this machine is only 2 days is a bit much that parties do not work, in my opinion, one most important parts who! Has anyone encountered this and y at - it a solution?

  I tried to do a shadow with an O & O 7 disc image, works fine, but could not create a boot disk for a reason any (and Yes, I was using a 64-bit program!)

  Any help and advice would be accepted with gratitude

  JUST found the solution! DON'T bother with the HP Utility App Center. Go to search and type 'recover' and it will give you the option to create rescue disks... And it worked on my computer without any error message

• I get the error "on the volume C: default transaction resource manager encountered an error during startup and its metadata has been reset. The data contains the error code. »

  original title: NTFS problem
  Every 5 seconds, I get a warning (event ID 136) that says: "on the volume C: default transaction resource manager encountered an error during startup and its metadata has been reset. The data contains the error code. »

  Immediately followed by an error (event ID 137) that says "on the C: volume default transaction resource manager encountered a one-time error and could not start. The data contains the error code. »

  I am running windows 7 ultimate in any way to solve this problem?
  

  Hello

  This problem occurs if the Windows file system transaction log is damaged. The Windows file system uses the transaction log to retrieve the system transactions when a file error occurs. The system of common log (CLFS) transaction logs may be left in an inconsistent state. When the CLFS transaction logs are in an inconsistent state.
  To resolve this problem, delete the files .blf and .regtrans-ms in the folder % Windir%\System32\SMI\Store\Machine.
  After you restart the computer, the registry regenerates the deleted files. These regenerated files are in a consistent state.
  1. click on Start , type cmd in the Search box, and then click cmd in the list of programs .

  2. click on run as administratorand then click continue.
  If you are prompted for an administrator password or for confirmation, type the password, or click allow.

  3. at a command prompt, type the following command and press ENTER:
  fsutil resource setautoreset true c:\
  Note these steps assume that Windows is installed in the default location, drive C. If this is not the case, adjust the drive letter of the path of the folder to match your configuration.

  4 restart the computer.

  I hope this helps.

• Error on blackBerry Smartphones: Blackberry Desktop Manager has stopped working

  I use Desktop Manager 4.7.0.32 with a Blackberry Bold (9000); I sync with Outlook 2007 and I am running Windows Vista 64-bit Ultimate w / SP1. Synchronization worked well for many years with previous blackberries, but the synchronization problem appeared after a year or two of use with my previous camera curve.  I replaced the curve with the bold thinking which damaged equipment could be the problem (one too many drops).

  However, the problem persists.  While it seems I can synchronize with success a way (from PC to BB), Director of office falls down to halfway through synchronization of calendar entries in a synchronization two-way, unless there has been no new entry calendar on the BB. The error is an error generated windows inidcating: Blackberry Desktop Manager has stopped working.

  I tried every solution I could find on the web, namely:

  • Uninstalling and reinstalling Desktop Manager, making sure that I run the installer as administrator.
  • My Blackberry wiping and reinstalling the operating system (I use 4.6.0.162)
  • Delete the Intellisync folder
  • Run scanpst on my Outlookpst file
  • Clear the entries of calendar on the Blackberry (temporary solution only)

  The latter is the only approach that has produced no results.  If I delete the entries on the Blackberry, the

  process synchronization adds them correctly, and the next time I run the synchronization, it works without a hitch.  As soon as I did all the entries on the BB unit however, Desktop Manager crashes again, and the only way I can make it work is to clear the entries on the Blackberry and start over.

  I'm several months and both handsets of BB has invested in this issue now.  I have a new fancy camera, but am recorded in writing of the appointments on paper when I am out of the office because I know they used to synchronize if I enter them at BB.  Type of defeated half the point of a blackberry...?

  Getting desperate here.  Help is appreciated.

  Brad

  Hello Brad!

  I had the same annoying problem that you guys have described here.
  After trough fishing a lot of post and forums I found a very surprising solution for another type of BB and a different version of the DM on XP and not Vista. Being desperate I tried and miraculously it worked!

  Start the DM BB and go - Syncronize - set - synchronisation - synchronization (button) - calendar - Advanced (button) - mapping fields (field mapping button) and I got rid of the synchronization between the flag "alarm" and the "free occupied" and the fields "invited".

  I did it and now everything works perfectly.

  I have a BB Bold, Vista Ultimate (32 bit), MSOffice 2007 (PRO) and a DMv4.7.

  I hope it will work for you also.

  Kind regards
  Steve

• Update for the application manager has failed. Impossible to reinstall. Cannot use my apps. Get the 43 error message when I try to re - install. Is it possible to fix this problem without a wipe and load?

  Update for the application manager has failed. Impossible to reinstall. Cannot use my apps. Get the 43 error message when I try to re - install. Is it possible to fix this problem without a wipe and load?

  Error 43 https://forums.adobe.com/thread/2070909

• Download Adobe Captivate trial - The Akamai Download Manager has encountered a fatal error: access denied.

  I tried to download the Adobe Captivate trial several times now.

  Finally, he worked at a given time, and I was downloading file 1 of 2. At half way I had to stop the download, with the intention to resume the next day. Now when I try to take it back, I kept getting the message "Akamai Download Manager has encountered a fatal error: access denied."

  http://www.Adobe.com/cfusion/tdrc/bundle.cfm?product=Captivate%5FEN%5FUS & loc = en_us & prdLabe l = Adobe Captivate 8.0 & resumeDLM = true & URL = http://trials3.adobe.com/AdobeProducts/CPTV/8_0_1/win64/Captivate _8_x64_LS21.7z; http://trials3.Adobe.com/AdobeProducts/CPTV/8_0_1/Win64/Captivate_8_x64_LS2 1.exe & language = en & index = 1 & name=Adobe%20Captivate%208.0%20English%20Windows64-bit & prompt = model pr & prdLabel = Adobe Captivate 8.0 optvalue = & upsell = 

  Even when I tried to register again on the Adobe Web site to restart a new download, I got the same message.

  Could someone please?

  Thank you

  Ivy

  Try to jump the ADM and download directly via the link below.  Don't forget to follow the steps described in the Note: very important Instructions in the section on the pages of this site download and have cookies turned on in your browser, otherwise the download will not work correctly.

  Adobe Captivate 8 direct download links: Free Trials with no Akamai | ProDesignTools

• That errro again... host currently has no error management network redundancy

  I don't get the "host currently has no error management network redundancy.

  I think that I have the correct configuration, but not sure since our network guys gave me the IP addresses to use for HA.

  Here is the config for HA

  ESX Server 6.

  Service console is on 0 to 172.16.1.106 in 255.255.0.0 vSwitch

  The second redundancy console) is on vSwitch 4 to 77.77.77.10 in 255.255.255.0.

  ESX Server 5.

  Service console is on vSwitch 4 to 172.16.1.105 in 255.255.0.0

  The second redundancy console) is on vSwitch 4 to 77.77.77.9 in 255.255.255.0.

  I've reconfigured HA on ESX Server 6 and ESX Server 5 and even restarted them but still not the mistake of redundancy...

  Something is not properly configured?

  stanj wrote:

  If the collection of network adapters offer the same functions of redundancy, so why so many articles point to using a second console HA redundancy?

  It's simply the options given. There are several ways to provide a redundancy of HA heartbeat.

  The article also indicates HA advanced features such as das.isolationaddress2 and das.failuredetectiontime will be charged when you set up a secondary service console. It is an approach more effective, but still more complicated?

  These advanced options are not always available and also provide another way to configure HA redunancy.

  Here's something interesting to look at as well

  http://www.yellow-bricks.com/VMware-high-availability-deepdiv/

  For me, I always learned the KISS method (Keep it Simple stupid).  Add a second NETWORK card is the easiest way to keep your redundant environment, in my opinion

• Error in running code of authorization scheme

  I run my application on APEX. ORACLE. COm and I immediately get the following error:
  
  ORA-06550: line 13, column 28: PL/SQL: ORA-00942: table or view does not ORA-06550: line 12, column 14: PL/SQL: SQL statement ignored ORA-06550: line 16, column 19: PLS-00364: variable index of loop "C1" use is invalid ORA-06550: line 16, column 5: PL/SQL: statement ignored ORA-06550: line 17, column 15: PLS-00364: variable index of loop "C1" use is invalid ORA-06550 : line 17, column 5: PL/SQL: statement ignored ORA-06550: line 25, column 28: PL/SQL: ORA-00942: table or view does not ORA-06550: line
  ERR-1082 error in authorisation system code execution.
  
  Here's credentials:
  Workspace: RGWORK
  Request: The Certification of-21405 Online Application Prototype
  User: TESTER
  Password: test123
  
  The public s/b application. I'm not able to identify the invalid authorization scheme. I checked all the authorisation schemes in the shared components > Security > authorisation schemes and can not find the culprit.
  
  Can someone help please?
  
  Thank you
  Robert
  My Blog: http://apexjscss.blogspot.com

  Your permission scheme "administrator access - control" at this line of code that uses a table which is not there (or RGTEST does not have access to):
  SELECT id, application_mode
  of apex_adm.apex_access_setup

  This authorisation system is used in the Admin tab.

  If you run the page in debug mode, you will see (among other things):

  0.19: authorization check: '11204012643155257465' user: 'nobody' component: 'tab '.
  0.20: see the error page...

  Who reported me to the section tab and there it was!

• Page restrictions - authorization scheme

  I have a 8736 application this application in the form of 3 tabs

  Tab1: information TAB2: Department tab 3: Admin

  3 as a form in which tab SHOULD only be displayed to users what rights of authorization. I tried to do it for sometimes now and it's not working. I have a table called users

  TABLE: users

  access_level username

  john919 2

  sarah765 0

  For the page to tab 3 If you have an access level of 2. You should be able to view this page, and if not, they should you get an error message saying "sorry you can not view this page.

  In this case 'john919' should be able to view the tab tab '3' page and 'sarah765' SHOULD NOT.

  I have this query in the authorization scheme and the type of plan: pl/sql function returning a Boolean

  DECLARE

  v_access_level NUMBER (2);

  BEGIN

  IF (: APP_PAGE_ID = 61)

  THEN

  SELECT MAX (ADMIN_LEVEL)

  IN v_access_level

  USERS

  WHERE USER_NAME =: APP_USER.

  IF v_access_level = 2

  THEN

  RETURN TRUE;

  ON THE OTHER

  RETURN FALSE;

  END IF;

  ON THE OTHER

  RETURN TRUE;

  END IF;

  END

  I have never try this before and I was ask autour and many people tell me that this should check the admin_level in the USERS table using the current username of the person that is whether they have access to this page. So far, it's like I miss. Help, please

  Hi Dave,.

  The code seems perfect, so the data required. You can use the two v ('APP_USER'); and: APP_USER. has no importance.

  It is difficult to say without seeing the data, are the capital letters of usernames in the table? Try to use UPPER (USER_NAME) = UPPER(:APP_USER)

  Although I suppose that it would give a no data found. What value is in the variable APP_USER? You can open a session that the use of the APEX debugging?

  APEX_DEBUG_MESSAGE

  Kind regards

  Joni

• Custom authentication scheme

  Dear community,
  
  I tried to create a custom authentication scheme based on a tutorial. But seemed to fail since the tutorial works on version 4.0 and I'm working on 4.1.
  
  Step 1. create table user_repository)
  username varchar2 (8).
  VARCHAR2 (8) password,.
  primary key (username)
  );
  
  Step 2 insert into user_repository values ('John', '1234');
  
  Step 3.
  
  create or replace package pkg_auth as
  function authenticate (p_username in varchar2,
  p_password in varchar2) return Boolean;
  end;
  
  create or replace package body pkg_auth as
  function authenticate (p_username in varchar2,
  p_password in varchar2) return Boolean is
  v_result integer: = 0;
  Start
  Select 1
  in v_result
  of user_repository
  where username = lower (p_username)
  and password = p_password;
  Return (v_result = 1);
  exception
  When no_data_found then
  Returns false;
  end to authenticate;
  end;
  
  Step 4. They want to create an authentication scheme from scratch, which does not exist in 4.1 (so it fails pretty well by already). I created a (based on some configs by default) normal authentication scheme.
  
  Step 5 They want to fill me this service "customized to authenticate": return pkg_auth.authenticate;
  Unfortunenately this functionality is not there either.
  
  
  Theyre talking passhashing, who used to work since I don't even get the normal authentication scheme to work.
  If someone could help me to create a custom authentication scheme based on the table in * 4.1, that wouldve was awesome.

  Authentication and authorization have been cleaned up to 4.1

  Create a schema of authentication "based on a pre-configured gallery system", and then select the type of theme of "custom".
  You can place your pl/sql code in the source field, or keep it in your database.
  Set your pkg_auth.authenticate in the field "name of the function of authentication.

  Final note - you should not really store plaintext passwords - I hope that this example of coding has been for the demo only. Check the past of examples that use the custom_hash function, for example.

  Scott

• c:\windows\system32\powrprof.dll has stopped working or has an error.

  I tried to open a session, but a popeed of message saying c:\windows\system32\powrprof.dll has stopped working or has an error. I'm not sure what this means or what past... I did not any changes to my computer lately.

  How can I fix?

  You forgot to specify what system you use, if it's Windows XP, Vista, Windows 7, or even Windows 98.

  Powrprof.dll library contains functions for Configuration of Microsoft Windows Power Management Tools.

  1. http://support.microsoft.com/kb/q188213/
  Error message: error loading Powrprof.dll

  For Windows 98

  2 powrprof.dll errors might indicate a registry problem problem, a virus or malware.

  If you are using Windows 98, suggest you only look at the possibility of a virus or malware problem.

  TaurArian [MVP] 2005-2010 - Update Services

• your task manager has been disabled by your administrator ".

  Since my desk top I press CTRL, alt, del, and I get the message: "your task manager has been disabled by your administrator". It's my personal computer, and I am running xp professional. How to activate it?

  See if the following article solves your problem:

  ""Task manager has been disabled by your administrator"error message.
    <>http://support.Microsoft.com/kb/555480 >

  HTH,
  JW

• How can I reset using windows XP digital rights management when an error message appears as 0xC00D2782

  I used my MP3 player to download digital books from the library using Overdirve Media Console.  Recently, I received a message indicating that an error has occurred.  He said that I had problems of digital rights management.  The error was 0xC00D2782.  I was not able to fix this problem.

  Does anyone have any suggestions?  I use Windows XP

  You will need to contact Overdrive for assistance.

  You can try to reset the DRM store, but you will lose the license for any protected media you have, and may not be able to access. Unfortunately, this may be required if Overdrive is unable to help.

  http://support.Microsoft.com/kb/891664