Custom color calibration lost with UAC, lock, sleep, start cold

Similar Questions

• Using pictures of Yosemite 1.0.1 I created a 400 photo album. I custom sort them. When I copy a USB to share with friends my custom sort is lost. Is it possible to maintain the current order of photo on a USB?

  Using pictures of Yosemite 1.0.1 I created a 400 photo album. I custom sort them. When I copy a USB to share with friends my custom sort is lost. Is it possible to maintain the current order of photo on a USB?

  Of course, not as the sorting, the viewer sees is defined by them not by you - given the same USB you can use the finder to display in alphabetical order, last updated order etc. size - files have no command - the viewer defines the order

  You can select Photos and export using a file for sequential access to export name so if the Viewer uses an alpha sort they correspond to your order desired - you can facilitate this, but they must define their queue viewer correctly for them to see it as you wish

  LN

• U2413 - factory Color Calibration and ICC profiles

  Hi, I just bought a U2413. I need for photography. There is nothing on profiles ICC U2413 DELL that was installed with the software in the documentation. And please note that I have not (yet!) a calibrator. I need to configure the best without calibrator... using the factory calibration.

  I hope you can make it clear, to me, how it works.

  The monitor has different MODES BUILT-IN, such as:
  -Color space sRGB
  -Color space ARGB
  -Standard
  -Game, etc.

  Which mode is the one that has been calibrated at the factory?
  What mode should I use in order to have the results of color?
  I see that there is no DELL U2413 color profile, D6500, which is associated with the monitor (I can see it in the control panel). I think it is good to have this setting. Can you please confirm?

  Do I set up the U2313 DELL ICC profile also to programs like Canon Digital Photo Professional, or as long as it is in Windows, it is not necessary? [Item 3 of this screenshot]. I see that if I put profile DELL in Canon DPP the colors of the photos appear much colder.

  Thank you

  If you do not have access to an i1DisplayPro/Color munki display a yo do not have the possibility to calibrate (not even in GPU with the munki:)

  factory calibrated
  -sRGB: 50 50 brightness contrast. You can use standard sRGB.icm, once lower you it up to 120cd/m (20-25% brightness) you will lose the white point calibration.

  -AdobeRGB: contrast 50 50 brightness. You can use standard AdobeRGB1998.icm (complatible or ones like Clay1998.icm), once lower you it up to 120cd/m (20-25% brightness) you will lose the white point calibration but less than sRGB. For color management programs and without perhaps a colorimeter its your safest choice, do not forget to assign and activate an Adobe1998.icm/Clay1998.icm in Control Panel of Windows to your monitor while you're in this preset OSDdevice.

  The other preset OSD are not calibrated at the factory.

  -standard is delivered with the native range (as described in U2413.icm of pilots) and native white (whie 6700-7000K with a strong green tint)

  -Custom is delivered with the native range (as described in U2413.icm of pilots) and native white (whie 6700-7000K with a strong green tint), but you have access to the parameters of "custom colors". 20-25% brightness, contrast 50%, and R = 100, G = 91 = 97 peut give you near D65 white and 2.26 "grow" gamma (cose to 2.2 or sRGB but I guess it comes with a ramp to a same gray except calibrated). Try these setings and activate U2413.icm in this preset custom of the OSD.

  And get an i1DisplayPro, you really need.

  Canon DPP regarding:

  2 refers to the "default" image profile
  3 to view the profile (so the DPP can distort the RGB values in the image to represent this color in what that is the range to your screen). Once you set a dile icm as 'default' in the control panel-> color management-> your device it shoud check the option "use operating system settings" (I think, I don't have any owm a canon camera)
  5 a your printer profile, a profile for each combination of inkjet paper
  6. keep this, perceptual is generally more 'alive' than the actual image
  7 I think takes forever with Canon programs (but I am not a canon camera, so I have not tried their meaning), keep the same as 6

• Color calibration - not able to change to a bright yellow yellow

  Separated from this thread.

  I use Windows 8.1 on a gaming laptop Lenovo.

  The yellow color is has a horrible greenish.  I went through the color calibration, but I wasn't able to change a bright yellow yolks.  Can someone help me?

  Hello

  Thanks for posting in the Microsoft Community.

  This might have caused due to display drivers corrupted sometimes when screen updates the latest drivers, you may experience these symptoms or customizing the desktop software could also create this problem

  1. did you do with the last changes made to the computer before this problem?

  I suggest you try the following steps.

  a. press the Windows key + R.
  b. type ""Control " and press OK."
  c. click on color management.
  d. click Advanced.
  f. click on Calibrate.
  g. click Next to continue.

  Additional information:

  Please visit the manufacturer of computer for the latest updates display drivers.

  Also, try the procedure described in the following Microsoft Help article.

  http://Windows.Microsoft.com/en-us/Windows-8/get-best-display-monitor

  We look forward to you a response. Please do not hesitate to contact us if you have other questions related to Windows.

• Color calibration has a clean mind (on battery)

  If the system has been a stack in any point of the session, color calibration seems to get dirty on the rise according to what is on the screen. If dark colours dominate the screen, the colors go slowly (but apparently) all weird. When it is contained is mainly white on the screen, he returns to normal.

  I've reviewed some power management settings, and none of them seem to relate to this.

  The system is W520 with FHD screen, Intel 8.15.10.2538 drivers, Nvidia 332.21, Windows 7 drivers.

  This does not work on Ubuntu, or on an external monitor.

  http://forums.Lenovo.com/T5/T400-T500-and-newer-T-series/T410-screen-brightness-dims-washes-out-on-b...

  Should be on this issue. Uncheck the "display energy saving technology."

• My Wd hard drive has been locked with Bit Locker and I don't have a password or recovery key. Please help me?

  MR PRESIDENT, I LOCKED UP MY HDD WD 320 GB WITH BIT LOCKER OF WINDOW 7. DUE TO SOME PROBLEMS, I CHANGED MY HARD DRIVE & FORMATTED OS WHERE I KEPT THE RECOVERY KEY. I COULDN'T REMEMBER MY PASSWORD AND RECOVERY KEY. I HAVE VALUABLE DATA in HDD. KINDLY HELP ME TO RECOVER DATA

  THANKING YOU.

  Sorry, the news is not good. Some time ago, you have chosen BitLocker because you want to protect your data against unauthorized access. If someone had told you that anyone can crack the encryption by asking a little help in this forum, would you have chosen BitLocker?

  BitLocker is as good as its reputation. Unless you followed best practices and created your own backdoor, your data is lost.

• Custom color in display Gantt chart based on the State - Apex 4.2

  Hello

  I need to specify the custom color display Gantt chart based on the State.

  Say: Open - Red

  Progress-yellow

  Cancelled - blue

  Closed - Green

  given that the status column is not part of Gantt chart question, how?

  Option color in table attributes is not helping this requirement.

  Kind regards

  Sanjaya

  Hello

  Finally, the problem is resolved with the help of Hilary Farrell-Oraclefantastic example and help anychart pages. This is useful for this URL.

  https://Apex.Oracle.com/pls/Apex/f?p=36648:30:102588100613368:

  http://6.anychart.com/products/anygantt/docs/users-guide/index.HTML?project-Gantt-chart.html

  http://6.anychart.com/products/anygantt/docs/users-guide/index.html?defaults.html

  -Sanjaya

• Choose a custom color?

  Hello! I am relatively new to using Adobe sketch, as I have long used of Sketchbook pro app. I use a mini iPad 4 for my platform.

  I was wondering how I could take a custom color for my brush of an image? As a color picker? I have fiddled the app for the tool, but nothing helped.

  Thanks in advance!

  Yes

  1. Double-click on the brush you want to use/Assign new color to.
  2. Click the icon of the lowest circle 'color '.

  Side note, press "long" on the brush will show several styles of brushes for each unit.  If you enjoy working with a brush in particular, in different colors, you can load to the top of your toolbar with the same brush style, each of them (out of five) with a different color.   Makes it easy to quickly switch the color values.

• How can I match the colors of Photoshop with web elements? Nothing works for me.

  Hello.

  the first thing I want to say is I know there are many other discussions and topics on this subject - I read them all, but nothing seems to work for me and I'm really confused and frustrated.

  My site has already made in CSS colors, but on some songs, I want to place images, corresponding Color at bottom of the site. It seems impossible.

  I tried almost all color profiles, sRGB, disabling the color, through "save for web", record management off the display in "proof colors" option, by checking and not unchecking each box, still no joy.

  Is the closest I have got in this way:

  • I put Monitor RGB in the color settings,
  • create a new document with no color management
  • fill the background with the color, what code I copy CSS,
  • Save in the dialog box Save for web without conversion to sRGB and embeded in JPG format color profiles (or PNG, cannot see any difference here) (Nothing checked under options for JPG) file

  Then I watch by edge Chrome, Firefox, and even if it is narrow, it just doesn't fit!

  When I do a screenshot of my site, paste in photoshop and choose colors with the color picker, the photoshop color watch codes are the same those of CSS, correct! But when I save... BAM, everything changes.

  How is that possible? And why these problems exist?

  Because, oddly enough, I managed to match all the colors perfectly in browsers with Microsoft paint on the first try! Without messing around with tons of color profiles, settings, color calibration and other sorts of black witchcraft that I don't understand.

  At this point, I do not see how potentially usable for webdesign Photoshop.

  I'll provide more information as soon as possible, if necessary.

  Photoshop manages color. Unfortunately, this leads to choices that must be made to the right, while the painting was simply a color unmatched brain dead.

  1. try to use sRGB as your workspace. Do not leave any conversion.

  2. save in PNG to test that the colors may change to JPEG.

  3 test cycle.

  4. If they don't always match, reopen the PNG and check its color. Unchanged?

• indexed - color mode how to remove a custom color table color

  Hello

  I'm working on a bitmap to which I put my color mode to "indexed color Mode.  I created a custom color table and I added 9 colors.  I would like to delete one of these colors, but I can't find a way to remove a color from my existing custom color table or start with an empty custom color table so that I can add only colours I want.  If someone can tell me how to do either of these things, I'd be very happy.

  Thanks in advance,
  Paul

  I had the same problem. I'm not sure that you can remove colors. I just changed the color, I'm not one of the existing colors that I want. It does not hurt to have two colors of the same value in the table.

  Edit: This is what I warned you about in your other post.

• Custom colors

  Is there a way to save and name a set of custom colors (used to highlight, fill, etc.) in Acrobat X Pro?

  There's not a built-in function to save and name a color custom to this end set. But here's how tackle this problem. I use about 15 different colors and they're all different subjects for me. Select the first comment for which you want to save the color. Right click > properties > general tab. Then in the field of the object, the name of your color.

  So what to do for each of the other colors that you want to save. Ensure that all comments containing the colors are on page 1.

  Once you are done with all the colors, select these comments in the notes pane and export all file data. It will record it as one. FDF file.

  Now, whenever you want to use these colors to highlight another document, simply import this FDF file into your current document. You will get a mandatory warning, on the way of reviews came from another document, ARE YOU SURE? ' Yes.

  Because the comments are related to single page and the geometry of single page numbers, they all see the place exactly in the same place as they were in your original document, then it would be a good thing to keep them in the margins of your original document.

  Whenever you want to use these custom colors. Simply click the color comment not > make current properties default.

  Hope that helps.

• XPS 15 (L502X) poor color calibration

  It seems that the color of the screen is bluish compared to any conventional screen.

  I tried calibration with spyder and all kinds of tools to color calibration but it always does'nt look right. How can I get a color that is 'normal '?

  Help! =)

  Thank you!

  Same problem here, the screen 1366 * 768 is completely useless. I totally regret buying this laptop.

  I tried lowering the settings of gamma in windows and games, which helps a little, but Hungarian is not going to be something close to perfection...

  I wonder if it is possible to interact with a screen 1600 * 900?

• Should I set up my Dell 3008 in Adobe RGB monitor mode when calibrating it with i1 Display?

  Hello

  Should I set up my Dell 3008 in Adobe RGB monitor mode when calibrating it with i1 Display?

  Thank you

  Thomas

  It depends entirely on what application you use to view the file. That's the key. Without - a complete remapping in the monitor profile - color management is displayed correctly. Yet once, IE is useless and you can just forget about it. Use Firefox with color management mode 1.

  With a standard range screen you out without color succeed because the monitor is pretty close to sRGB it will be roughly right, as long as the file has number of sRGB. That's why sRGB became the standard of the internet.

  But if you have a string of color management complete the source profile may be what you want and the monitor can be standard or wide or whatever it is between the two and it will display properly without worrying. That's the whole point of the color management - a color space (the file) be remapped in the other (the monitor).

• Auto Custom Color Palette apply to the photo?

  I have two questions:

  (1) is there a way to automatically capture the colors of a photo to create automatically a custom color palette? (for example, if I want a color palette of 20 colors, it would automatically pick 20 colors and create a palette).

  (2) is it possible to pick a custom color palette and automatically apply this palette to a photo?

  (I don't want to just use the color picker to choose my colors... I'm looking for Automation)

  Thank you!

  There is always the Image > adjust > Color Match (but this was not very successful in this case IMO).

  For lower quality and smaller size, you can use save for Web with GIF or PNG-8. Save and reload the color table.

  

• Coloring a font with a RGB, etc. without adding color in the swatch of the document.

  Is it possible to color a font with a RGB, Lab, or CMYK color without adding color in the swatch of the document.

  The only way I know is to add a color to the color chart or use an existing one.

  as

  App.Selection [0]. Characters [0]. FillColor = document. Colors.Add ({colorValue: 255, 53 (160) and space: ColorSpace.RGB}) ;}

  As a side effect to clutter up shades using many colors.

  any ideas?

  Hello Uwe!

  After 03:00 by me 02:00 by you

  I tried the link and it download but I have cs5 cs6 and cc but not cs5.5 and all the scripts worked on them can due to the conversion of files.

  It seems therefore that the following summary is all is correct

  New documents contain some

  Color chart (black, registration, paper and none) the index order is the order in which shades appear in the swatches Panel

  And the colors in the order of the alphabetical index

  named colors without name last and then 'A', 'Z' first color.

  Color documents News-[1] will be a color without a name that can be duplicated to produce other colors without name, noting that duplication should be processes and not the tones.

  So far so good, (not for long)

  Unnamed colors are not read only so if we make a positive effort to remove, we can do that.

  while (app.activeDocument.colors[-1].name == "") app.activeDocument.colors[-1].remove()
  

  Now, we will not have any what swatches without a name to duplicate and will have to use the method of file text marked with John at number 3 above.

  If there is no shade no name and we try to replicate the colors [-1] and it's a color as 'Yellow', then it seems s indesign crash.

  In any case the method below should always work (for regular non-dyed colours etc.).

  // optimized for easy of use but not efficiency !!!
  var doc = app.documents.add();
  var p = doc.pages[0];
  
  p.textFrames.add({contents: "RGB", geometricBounds: ["0mm", "0mm", "30mm", "30mm"], fillColor: addUnnamedColor([0, 0,255])}); // will be a RGB
  p.textFrames.add({contents: "RGB", geometricBounds: ["0mm", "30mm", "30mm", "60mm"], fillColor: addUnnamedColor([0, 255,0], 1666336578)}); // will be a RGB because of value
  p.textFrames.add({contents: "RGB", geometricBounds: ["0mm", "60mm", "30mm", "90mm"], fillColor: addUnnamedColor([65, 50, 102], ColorSpace.RGB)}); // will be a RGB
  p.textFrames.add({contents: "RGB", geometricBounds: ["0mm", "90mm", "30mm", "120mm"], fillColor: addUnnamedColor([84, 90,40],"r")}); // will be a RGB
  p.textFrames.add({contents: "RGB", geometricBounds: ["0mm", "120mm", "30mm", "150mm"], fillColor: addUnnamedColor([232, 0, 128],1)}); // will be a RGB
  
  p.textFrames.add({contents: "Lab", geometricBounds: ["30mm", "0mm", "60mm", "30mm"], fillColor: addUnnamedColor([29.5, 67.5, -112])}); // will be a Lab because of -
  p.textFrames.add({contents: "Lab", geometricBounds: ["30mm", "30mm", "60mm", "60mm"], fillColor: addUnnamedColor([100, -128, 127], 1665941826)}); // will be a Lab because of value
  p.textFrames.add({contents: "Lab", geometricBounds: ["30mm", "60mm", "60mm", "90mm"], fillColor: addUnnamedColor([24.5, 16, -29], ColorSpace.LAB)}); // will be a Lab
  p.textFrames.add({contents: "Lab", geometricBounds: ["30mm", "90mm", "60mm", "120mm"], fillColor: addUnnamedColor([36.8, -9, 27],"l")}); // will be a Lab
  p.textFrames.add({contents: "Lab", geometricBounds: ["30mm", "120mm", "60mm", "150mm"], fillColor: addUnnamedColor([51, 78, 0], -1)}); // will be a Lab because of the 1
  
  p.textFrames.add({contents: "CMYK", geometricBounds: ["60mm", "0mm", "90mm", "30mm"], fillColor: addUnnamedColor([82, 72, 0, 0])}); // will be a CMYK because there are 4 color values
  p.textFrames.add({contents: "CMYK", geometricBounds: ["60mm", "30mm", "90mm", "60mm"], fillColor: addUnnamedColor([60, 0, 100, 0], 1129142603)}); // will be a CMYK because of value
  p.textFrames.add({contents: "CMYK", geometricBounds: ["60mm", "60mm", "90mm", "90mm"], fillColor: addUnnamedColor([84, 90,40, 0], ColorSpace.CMYK)}); // will be a CMYK
  p.textFrames.add({contents: "CMYK", geometricBounds: ["60mm", "90mm", "90mm", "120mm"], fillColor: addUnnamedColor([67, 53, 97.6, 21.7], "c")}); // will be a CMYK
  p.textFrames.add({contents: "CMYK", geometricBounds: ["60mm", "120mm", "90mm", "150mm"], fillColor: addUnnamedColor([0, 100, 0, 0], 0)}); // will be a CMYK
  
  function addUnnamedColor (cValue, space, docToAddColor) {
      docToAddColor = app.documents.length && (docToAddColor || (app.properties.activeDocument && app.activeDocument) || app.documents[0]);
      if (!docToAddColor) return;
      var lastColor = docToAddColor.colors[-1];
      if (!cValue) cValue = [0,0,0,0];
      if (space == 1129142603 || cValue && cValue.length == 4) space = ColorSpace.CMYK;
      else if ((space && space < 0) ||  space && space == 1665941826 || (space && /L|-/i.test(space.toString())) || (cValue && /-/.test(cValue ))) space = ColorSpace.LAB;
      else if ((space && space > 0) || space && space == 1666336578 || (space && /R/i.test(space.toString())) || (cValue && cValue.length == 3)) space = ColorSpace.RGB;
      else space = ColorSpace.CMYK;
      app.doScript (
          """
          var newUnnamedColor = (lastColor.name == "") ? lastColor.duplicate() : taggedColor();
          newUnnamedColor.properties = {space: space, colorValue: cValue};
          """,
          ScriptLanguage.javascript,
          undefined,
          UndoModes.FAST_ENTIRE_SCRIPT
      );
  
       function taggedColor() { // need to use this if no unnamed exists
               var tagString = "\r " : "WIN>\r ") + ""; // would make more sense to apply the correct value in the tagged text file but I can't be bothered !
               var tempFile = new File (Folder (Folder.temp) + "/ " + (new Date).getTime() + ".txt");
               tempFile.open('w');
               tempFile.write(tagString);
               tempFile.close();
               var tempFrame = docToAddColor.pages[-1].textFrames.add();
               $.sleep(250);
               tempFrame.place(tempFile);
               tempFrame.remove();
               tempFile.remove();
  
           return docToAddColor.colors[-1];
  
       }
  
      return newUnnamedColor;
  }
  

  Apply the function to remove and replace swatch on the other thread both healthier of mind

  Concerning

  Trevor