HP QuickWeb on a HP Mini 110 3500

Similar Questions

• HP Mini 110-3500: HP Mini 110-3500 Bios Admin password

  Hello!
  
  I'm working on laptop HP Mini 110-3500 of my cousin and I need to enter the Bios. It doesn't have all of the paperwork that came with the computer.  How should I approach to try to understand what is the BIos Admin password?  This is the best place for this or I have to send HP directly?
  
  Any help will be appreciated.  Thank you

  Hello

  You can use the link below to generate the BIOS password reset key. Enter the system code stop or the serial number of the device to generate a.

  You can:

  1. use the unlock code you generated to enter BIOS

  2 disable all passwords that are enabled in the Security menu of BIOS.

  3. If the request for current password - enter the unlock code

  4. for the new password, simply press the ENTER key

  5. repeat the same thing to check the password column.

• HP Mini 110-3500: network controller HP Mini 110-3500 driverDevice instance id:

  Help, I can't get the driver for HP mini 110-3500 for win 7:

  1. network controller

  Device instance ID: PCI\VEN_14E4 & DEV_4727 & SUBSYS_1483103C & REV_01\4 & 418BFF & 0 & 00E0

  2 USB controller

  Device instance ID: USB\VID_0000 & PID_0000\5 & 840DB8E & 0 & 6

  Help, please

  Thank you...

  Hello:

  You need the drivers for the wireless card.

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-107849-1&cc=us&DLC=en&LC=en

  I have no idea what either one is missing.

• HP MINI 110 3500 - NETWORK (UNKNOWN DEVICE) CONTROLLER

  Dear Experts,

  HP mini 110-3500-windows xp

  Discovered: network controller (unknown device)

  Broadcom 802 BCM4313. 11 b/g LP - PHY

  What should I do? should I install the driver? should which driver I install?

  my laptop also impossible to activate WLAN adapt, because it is activated (written assistant wireless).

  Help me!

  Hello:

  Please see if this driver gets your wireless adapter to work.

  http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=321957&prodSeriesId=3688868&prodNameId=3688870&swEnvOID=1093&swLang=13&mode=2&taskId=135&swItem=ob-101092-1

• HP Mini 110-3500 does not start

  HP Mini 110-3500 will not start. When I try to start I get a prompt back "BOOTMGR is missing" & «Press Ctrl + Alt + Delete to restart»

  I tried a "Factory Image Restore" and it failed with an ERROR msg '0xe0efooo3 '.

  Any help is appreciated.

  Sorry to hear that Geezer.

  You need to replace the HARD drive and reload the operating system.

  REO

• HP mini 110-3500 laptop: computer laptop HP mini 110-3500 fails to start after the SSD upgrade

  Hello
  I recently bought a ' crucial 250 gb 2.5 "SSD and 2 GB of RAM (also by crucial), to upgrade my laptop HP mini 110-3500, who has been extremely slow. But unfortunately, the laptop refused to start when turned on. What can I do? I am very worried.
  Enkay1

  You answered. That's what I thought. You have DDR3L-1600 low voltage 1.35 volts. Low voltage will operate at a higher voltage (1.5 volts), but it is not the ideal memory for older hardware. Need memory DDR3-1333 name specified for the HP laptop. You can confirm or refute my diagnosis by putting in the memory of the old and see if it boots.

  It's the part number you need:

  621567 001

  http://www.eBay.com/ITM/2GB-compat-to-621567-001-A3803335-A4100445-A4427375-/230655741975?PT=LH_DefaultDomain_0&hash=item35b4275017

  

  Is your memory has 8 black on the side blocks or just 4? You want 8. Also if you have Windows 7 Starter, you can not use 2 GB of RAM.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• Problem updating Mini 110-3500 2 GB RAM

  A few days ago, I bought a HP Mini 110-3500 netbook (more precisely a 110-3538TU / LD928PA) and separately, I bought an upgrade to 2 gigabytes of RAM to another bank. So far I had been focused on the problems of screen resolution but tonight, I finally installed the RAM, but the machine could not be started. I tried three times and he has always worked with the original 1gig but never with the upgrade to 2 giga.

  In the store, I noticed that the display Mini 110 used RAM Kingston, so I took care to buy the same brand. I turn the machine on, I brought was not Kingston but RAM Samsung. I have included a picture of two RAM sticks.

  Is - this Mini 110 module is known to work only with certain brands of RAM? I have somehow the wrong type of RAM? I have to change something in the computer so that it can recognize the extra RAM? Is there a brand recommended RAM should I buy instead?

  

  Unfortunately, I didn't get to try the Kingston RAM on another machine. I tried all my local chain computer stores and MOM & dad computer Chinese import stores and the only other brand available was "Amicroe" resembling a brand generic cheapo, perhaps re-marked. Normal price was AUD $119,96 but Harvey Norman gave me for $60, $5 more that I had paid for the Kingston RAM. I was skeptical, but it was working good in weeks.

• HP mini 110-3500: no VGA connection more after installing Linux 16.04 LTS

  Hello!

  I can't fix my VGA problem in recent weeks and your community can solve it!

  I'm new to Linux and I have installed the 16.04 LTS version in my mini HP 110-3500.

  No more and all other system inside HP program.

  Before Linux 16.04 LTS, a BENQ F93GX external VGA display was connected to my HP mini computer, but leave now "not received no signal" message appeared on it when I turn it on «»

  I've installed some utilities and drivers from here and there, does a little work, but, I always in the dark.

  Below that pop up with the commands:

  1 - lspci k | grep-iA2 VGA

  00:02.0 VGA compatible controller: Intel Corporation Atom D4xx/D5xx/N4xx/N5xx Processor Integrated Graphics Controller
  Subsystem: Hewlett-Packard Company Atom graphics processor integrated D4xx/D5xx/N4xx/N5xx Controller
  Kernel modules: i915

  2 - xrandr without connected VGA:

  xrandr: failed to get the size of gamma for failure to exit
  Screen 0: minimum 1024 x 600, current 1024 x 600, 1024 x 600 maximum
  by default connected 1024 x 600 + 0 + 0 0 x 0mm
  75.00* 1024 x 600

  3 - xrandr with VGA connected and "lit".

  xrandr: failed to get the size of gamma for failure to exit
  Screen 0: minimum 1024 x 600, current 1024 x 600, 1024 x 600 maximum
  by default connected 1024 x 600 + 0 + 0 0 x 0mm
  75.00* 1024 x 600

  I received help from other communities, but the problem still there, can you please give it a try?

  I wish you a nice day.

  Thank you

  Domng

  Hi @Domng,

  Welcome to the HP Forum!

  Thanks for joining the community of the HP Forum.  It is a great resource for information, advice and solutions that have helped others. Here is a link as a guide should you have any concerns or questions about the process:

  First time here? Learn how to post and more

  I understand that you have installed Linux and your VGA port does not work.  HP does not support Linux but supports the hardware.

  Here is a link that can help:

  HP Notebook PC - Frequently asked Questions on Linux (FAQ)

  Good luck!

  If this post has helped you solve your problem, please choose "accepted Solution"to help other members and visitors locate that information. "  To say thanks for the help, please click "Thumbs Up icon" below.

• HP MINI 110-3500 ID 64JM61-5HH70G-MFKR41-60BR03 FAILURE

  Hi, my hp mini netbook 110-3500 fell down and now won't start. The test failed and the failure of start id is 64JM61-5HH70G-MFKR41-60BR03. What it means? Is possible to fix it, or is it better to put it in the trash? Thank you to.

  Good bye.

  Claudio

  Hello

  Failure id 24 tank simply means the disc is dead (or on the point of death). You can replace the HARD drive or it's bin according to its value now. Please note: you must also add your time to the photo.

  Kind regards.

• HP Mini 110-3500 laptop PC: audio output device removed by error of hp mini 110-3500 need to download a relocation

  I accidentally deleted the prgram via Control Panel uninstall. Need to download even a reinstall.

  Hello

  What program you are referring to?  Or do you mean you deleted the driver for your Audio/output device?

  Checkurtech

• WiFi driver for hp mini 110-3500

  need help with driver wifi...

  problem is solved.

  THX much Mumbodog

• I bought this HP Mini with Windows 7 Starter already installed 110-3500. After years of 1 1/2 to use it, I get a message saying that the system is original noy. How can I fix?

  I bought this HP Mini with Windows 7 Starter already installed 110-3500. After years of 1 1/2 to use it, I get a message saying that the system is original noy. How can I fix? Product no. 00342-OSM-8992752-30008

  Please run the Microsoft Genuine Diagnostics Tool then copy and paste the results into an answer here for further analysis:
  http://go.Microsoft.com/fwlink/?LinkId=52012

  Have you tried to restart by phone?

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us

• Problem of HP Mini 110-355 after installing win xp

  Hi every1!

  hope someone could help me soon...

  I have 110-3500 mini hp win 7 (bones included) I have a mini internet shop

  I was able to install win xp (on USB) on my loptop since some of my necessary habit of the software work on win 7.

  but the problems are.

  (1) optical mouse usb does not work! He says: "cannot install, peripheral is dsabled" he keeps saying it, even after activation of the device said on Device Manager and the Device Manager, under HID class, there is an unknown device:

  and: (2) my wifi and and bluetooth does not work (the two are also in the same switch)

  I downloaded and installed any necessary drivers form net but only that both do not work.

  hope to hear any response soon... thank you so mch...

  Hello:

  Please see if the chipset driver helps with this unknown device.

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=ob-89844-1&CC=US&DLC=en&LC=en&os=228&Product=4346351&sw_lang=

  I don't know why your network cards do not work if you have the drivers installed for them.

  Try the latest driver for network card for XP...

  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=12454&prodSeriesId=472276&swItem=ob-101092-1&mode=3

  Try this driver package and the bluetooth software...

  http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=5169094&prodSeriesId=5071191&prodNameId=5071193&swEnvOID=1093&swLang=13&mode=2&taskId=135&swItem=ob-92064-1

  Paul

• HP mini 110-1110SA: HP mini 110-1110SA locked

  I try to repair my old HP mini 110-1110SA but it has a bios lock and I forgot the password AND ALL 3 TIMES I TRY A word PAST IT FROZEN. BTW, my mini HP serial number is CNU93954WV. He showed me a screen blank and it says enter the current password in the center of the screen.

  Please try-

  e9lofoqvd6

  Hope this helps, for other queries in response to the post and feel free to join us again

  * Click on the button white Thumbs Up on the right of say thank you*.

  Make it easier for others to find solutions by checking a response 'accept as Solution' if it solves your problem.

  Thank you

  GBL84

  I'm not an employee of HP

• HP Mini 110 (XP) - no sound after reinstallation

  Hello! I have a problem after reinstalling my HP Mini 110 and would appreciatte any comment on that.

  I formatted the pc and installed a new version of XP Home edition (SP2).
  Everything went very smooth and all the drivers where installed (downloaded from the HP driver support site).

  Video, network, Intel Wifi chipset, Bios, everything works like a charm... expect for AUDIO.

  I installed the driver IDT, but at the start of the installation it says something in the sense of "your audio device is not supported by this installer" and stops.

  I tried with several different drivers (all from HP site) with no luck.

  Another thing that caught my attention, it's that there is no audio device in the "material management" tab of the system... No sound card is detected! It seems really weird to me...

  What could be the problem? Clues? I must point out that the format of the sound card worked perfectly.

  My computer is a HP Mini 110 (LA 1020).

  $ 1 million for any feedback thanks!

  Ale_Argentina.

  Well Finally I solved it. !!

  The thing is simple... As soon as I installed SP3, the material was detected and drivers accepted without problem.

  Storms XP SP2 will NOT work with the IDT audio device. Just updated to SP3 and immediately the sound card started working.

  Thank you Paul for your entry in the last few posts.

  See you soon!

  Ale_Argentina