Custom Foglight outside access dashboard

Similar Questions

• Prevent outside access to a form of Eloqua

  I have an email campaign targeting a select list of contacts and you want to only allow these contacts go to the landing page.  E-mail links have a query string that I can check and block foreign access to the landing page via a direct url.  However, if the planned contact had to follow the message to a friend, that won't stop the friend access to the form that the query strings would be present.

  As a second check, I could use contact data searches and compare the e-mail to E-mail contact provided, but if they are on a new machine and that you do not have an Eloqua cookie, then this would not solve the problem. Since it is a sort of re-engagement campaign, they are relatively old contacts and this could be the case.

  I'm looking for ideas on how to frame this problem and solve it for as many opportunities as I can.  Please post ideas or answers if you have.

  Thank you

  Donald

  Thank you to those who submitted ideas for this problem.

  I solved this problem using strings of query on the links in the email that go to the screen.  To ensure no outside access, I use JavaScript to check the query string and if it is not present, I redirect them to the home page of the client. This will prevent any external links to access the form.

  In addition, when someone receives email (they'll will receive an email for every single product they have purchased), click and send the form, they are placed in a contact group for the single product via a processing step.  I then use the research data of contact group when the form is responsible for checking that the contact is not in the contact group for the unique product specified in the query string by e-mail.  Are they in the contact group about the unique product, then I redirect to the homepage of the customer.  This method makes sure the contact can access only the form once for each unique product.

  Hope this is very convenient for someone on the road facing a similar problem.

  Donald

• Groovy foglight api access code, must study info db-tables foglight

  Hello

  I need to build the report that gives details of alarms as recognized time, gravity, host, crΘation, rule that generated this alert, message etc, I know we can use directly readymaid alarm dashboard or we can build the custom dashboard, but we are facing problems of latency using the custom dashboard or dashboard system provided so we want to query the database tables Foglight directly and find additional information. I do not have access database oracle required from now, so I would like to know the names of tables and schema name associated with the alarms.

  I know we can get alarm associate script editor information and explore a bad api so I wrote code groovy with the help of the api to access the AgentService or AlarmService, but I don't know how to access the SchemaView methods, TableView or table interfaces that provides required methods that can provide db information.  SchemaView or TableView or Table are not part of the services listed, so I don't know how to use the methods listed under this interfaces.

  For example if I want to know the name of the schema where the name of the table is: alarm_alarm OR if I want to know all available under particular schema tables and then how to get the use of groovy and foglight Explorer api.

  Can someone show example how to make use of available methods from interfaces (SchemaView, TableView or table) of theses.  (Joint screenshot of this 3 interfaces that I want to explore and use the methods of the it)

  Thank you

  Derrick

  Additional accessories:

  • schema_view. GIF
  • table. GIF

  Regarding your condition to "build report which provides information of alarms as created in time, acknowledged the seriousness, host, time, rule that generated this alert, messages etc.", there is an example of using the RuleService API and AlarmService to generate a similar report in Foglight Reporting using metric queries or Groovy. See the example "Generate a list of all current alarms with details" for more details.

  Kind regards

  Brian Wheeldon

• PIX501 customer VPN - cannot access inside the network with VPN Session

  What follows is based on the config on the attached link:

  http://www.Cisco.com/en/us/Partner/Tech/tk583/TK372/technologies_configuration_example09186a008009442e.shtml

  PIX Ver 6.2 (3) - VPN Client 3.3.6(A) - Windows XP Client PC

  We can establish the VPN to the PIX501 session, but we cannot access the network private behind the pix.

  Here is the config - I can't determine why it does not work, we are desperate to get there as soon as POSSIBLE!

  We have the same problem with the customer 4.0.3(c)

  Thanks in advance for any help!

  =======================================

  AKCPIX00 # sh run

  : Saved

  :

  6.2 (3) version PIX

  ethernet0 nameif outside security0

  nameif ethernet1 inside the security100

  hostname AKCPIX00

  domain.com domain name

  fixup protocol ftp 21

  fixup protocol http 80

  fixup protocol h323 h225 1720

  fixup protocol h323 ras 1718-1719

  fixup protocol they 389

  fixup protocol rsh 514

  fixup protocol rtsp 554

  fixup protocol smtp 25

  fixup protocol sqlnet 1521

  fixup protocol sip 5060

  fixup protocol 2000 skinny

  fixup protocol sip udp 5060

  names of

  access-list 101 permit ip 192.168.1.0 255.255.255.0 10.0.0.0 255.255.255.0

  pager lines 24

  interface ethernet0 10baset

  interface ethernet1 10full

  Outside 1500 MTU

  Within 1500 MTU

  external IP address #. #. #. # 255.255.240.0

  IP address inside 192.168.1.5 255.255.255.0

  alarm action IP verification of information

  alarm action attack IP audit

  IP local pool akcpool 10.0.0.1 - 10.0.0.10

  history of PDM activate

  ARP timeout 14400

  Global 1 interface (outside)

  (Inside) NAT 0-list of access 101

  NAT (inside) 1 0.0.0.0 0.0.0.0 0 0

  Route outside 0.0.0.0 0.0.0.0 #. #. #. # 1

  Timeout xlate 03:00

  Timeout conn 01:00 half-closed 0: 10:00 udp 0:02:00 CPP 0: h323 from 10:00 0:05:00 sip 0:30:00 sip_media 0:02:00

  Timeout, uauth 0:05:00 absolute

  GANYMEDE + Protocol Ganymede + AAA-server

  RADIUS Protocol RADIUS AAA server

  AAA-server local LOCAL Protocol

  the ssh LOCAL console AAA authentication

  No snmp server location

  No snmp Server contact

  SNMP-Server Community public

  No trap to activate snmp Server

  enable floodguard

  Permitted connection ipsec sysopt

  No sysopt route dnat

  Crypto ipsec transform-set esp - esp-md5-hmac RIGHT

  Crypto-map dynamic dynmap 10 transform-set RIGHT

  map mymap 10-isakmp ipsec crypto dynamic dynmap

  mymap outside crypto map interface

  ISAKMP allows outside

  part of pre authentication ISAKMP policy 10

  encryption of ISAKMP policy 10

  ISAKMP policy 10 md5 hash

  10 2 ISAKMP policy group

  ISAKMP life duration strategy 10 86400

  vpngroup address akcpool pool akcgroup

  vpngroup dns 192.168.1.10 Server akcgroup

  vpngroup akcgroup by default-domain domain.com

  vpngroup split tunnel 101 akcgroup

  vpngroup idle 1800 akcgroup-time

  vpngroup password akcgroup *.

  vpngroup idle 1800 akc-time

  Telnet timeout 5

  SSH #. #. #. # 255.255.255.255 outside

  SSH timeout 15

  dhcpd address 192.168.1.100 - 192.168.1.130 inside

  dhcpd dns 192.168.1.10

  dhcpd lease 3600

  dhcpd ping_timeout 750

  dhcpd allow inside

  Terminal width 80

  Cryptochecksum:XXXXX

  : end

  AKCPIX00 #.

  Config looks good - just as domestic mine to my local network. The only thing I can think is that you may have entered commands in the wrong order - which means, you could have isakmp or encryption before the config map was complete. Write memory, then reloading the pix is a way to reset everything. If you do not want downtime:

  mymap outside crypto map interface

  ISAKMP allows outside

  Enter these two commands should be enough to reset the ipsec and isakmp.

• vCops default vs. Custom UI details permissions dashboard

  I just want to clarify that:

  • vCops default dashboard permissions are defined in vCenter (no matter if you use the vCops or vCops browser plugin) (no need to LDAP Setup for vCenter uses permanent AD by default)
  • vCops custom UI permissions are defined in a separate DB which may be related to LDAP.
  • No authorization is shared between two dashboards

  Is this correct?

  Thank you

  -MattG

  Hello Matt,

  There are prmisssions shared between both the dashboards that are administrator accounts that have been implemented in the initial instalation of the Ops vC. Ohter than that users can use their ID to connect with bothe Standard and tables of edge custom but we (Admins) need to grant access to vcenter for standard dashboard and dashboard custom w ehave to use the LDAP configuration.

  Thank you

  VK

• VPN established but the customer can not access the internet... Need help.

  Hi all

  I'm trying to get a functional ASA 5505 appliance but does not always succeed. I managed to get connected to the ASA VPN client, but once connected, vpn client cannot access the internet. I am trying to route traffic from the client to the VPN server so I don't want to split tunneling. Here is the sketch of the testbed of the network:

  DNS:210.193.2.66
  |
  |
  Inside   ---------  Outside                         ---------          -------------------
  192.168.1.1 |         | 202 *. *. 84 202.*. *. 1.         |          [                  ]
  ---------------------- ASA |-------------------------------------  GW  |----------[ INTERNET ]
  |                   | 5505.                    |                |         |          [                  ]
  |                   | --------|                    |                 ---------           -------------------
  Host_A                                          | 202.*. *. 83
  192.168.1.5                                -------------
  | NetGear |
  | Router |
  --------------
  | 192.168.2.1.
  |
  |
  HOST_B |
  Physical addr:192.168.2.2
  Addr:192.168.3.1 VPN

  The ASA 5505 config is as shown below:

  Output from the command: 'show running-config '.

  : Saved
  :
  ASA Version 8.2 (1)
  !
  ciscoasa hostname
  activate 0cMYKRmmOdVhcSr4 encrypted password
  2KFQnbNIdI.2KYOU encrypted passwd
  names of
  !
  interface Vlan1
  nameif inside
  security-level 100
  IP 192.168.1.1 255.255.255.0
  !
  interface Vlan2
  nameif outside
  security-level 0
  IP 202.*. *. 84 255.255.255.128
  !
  interface Ethernet0/0
  switchport access vlan 2
  !
  interface Ethernet0/1
  !
  interface Ethernet0/2
  !
  interface Ethernet0/3
  !
  interface Ethernet0/4
  !
  interface Ethernet0/5
  !
  interface Ethernet0/6
  !
  interface Ethernet0/7
  !
  passive FTP mode
  inside_nat0_outbound list of allowed ip extended access any 192.168.3.0 255.255.255.224
  pager lines 24
  asdm of logging of information
  Within 1500 MTU
  Outside 1500 MTU
  IP local pool vpnpool 192.168.3.1 - 192.168.3.20 mask 255.255.255.0
  ICMP unreachable rate-limit 1 burst-size 1
  don't allow no asdm history
  ARP timeout 14400
  Global 1 interface (outside)
  NAT (inside) 0-list of access inside_nat0_outbound
  NAT (inside) 1 0.0.0.0 0.0.0.0
  Route outside 0.0.0.0 0.0.0.0 202.128.171.1 1
  Timeout xlate 03:00
  Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
  Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
  Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
  Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
  timeout tcp-proxy-reassembly 0:01:00
  dynamic-access-policy-registration DfltAccessPolicy
  Enable http server
  http 192.168.1.0 255.255.255.0 inside
  http 192.168.1.0 255.255.255.128 inside
  No snmp server location
  No snmp Server contact
  Server enable SNMP traps snmp authentication linkup, linkdown cold start
  Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac
  Crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
  Crypto ipsec transform-set ESP-DES-SHA esp - esp-sha-hmac
  Crypto ipsec transform-set ESP-DES-MD5 esp - esp-md5-hmac
  Crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
  Crypto ipsec transform-set ESP-3DES-MD5-esp-3des esp-md5-hmac
  Crypto ipsec transform-set ESP-AES-256-SHA 256 - aes - esp esp-sha-hmac
  Crypto ipsec transform-set ESP-AES-128-SHA aes - esp esp-sha-hmac
  Crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
  Crypto ipsec transform-set ESP-AES-128-MD5-esp - aes esp-md5-hmac
  life crypto ipsec security association seconds 28800
  Crypto ipsec kilobytes of life - safety 4608000 association
  crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 pfs Group1 set
  Crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 value transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA MD5-ESP-3DES ESP-DES-SHA ESP-DES-MD5
  outside_map card crypto 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP
  outside_map interface card crypto outside
  crypto ISAKMP allow outside
  crypto ISAKMP policy 10
  preshared authentication
  3des encryption
  sha hash
  Group 2
  life 86400
  enable client-implementation to date
  Telnet timeout 5
  SSH timeout 5
  Console timeout 0
  dhcpd outside auto_config
  !
  dhcpd address 192.168.1.5 - 192.168.1.20 inside
  dhcpd dns 210.193.2.66 210.193.2.34 interface inside
  dhcpd allow inside
  !

  a basic threat threat detection
  Statistics-list of access threat detection
  no statistical threat detection tcp-interception
  WebVPN
  Group Policy Reveal internal
  Group Policy attributes Reveal
  Protocol-tunnel-VPN IPSec
  username password alice tnbrh7ICan8mnq/Y encrypted privilege 0
  alice username attributes
  Strategy Group-VPN-Reveal
  tunnel-group Reveal type remote access
  tunnel-group reveal General attributes
  address vpnpool pool
  Group Policy - by default-Reveal
  tunnel-group show ipsec-attributes
  pre-shared-key *.
  !
  class-map inspection_default
  match default-inspection-traffic
  !
  !
  type of policy-card inspect dns preset_dns_map
  parameters
  message-length maximum 512
  Policy-map global_policy
  class inspection_default
  inspect the preset_dns_map dns
  inspect the ftp
  inspect h323 h225
  inspect the h323 ras
  inspect the rsh
  inspect the rtsp
  inspect esmtp
  inspect sqlnet
  inspect the skinny
  inspect sunrpc
  inspect xdmcp
  inspect the sip
  inspect the netbios
  inspect the tftp
  !
  global service-policy global_policy
  context of prompt hostname
  Cryptochecksum:bfb0083a8eb2416e9cc27befe3b224d9
  : end

  a few thoughts

  permit same-security-traffic intra-interface

  NAT (outside) 1 your pool of vpn client

  ASA sysopt connection permit VPN

  ASA sysopt connection permit-ipsec

• Customer remote cannot access the server LAN via VPN

  Hi friends,

  I'm a new palyer in ASA.

  My business is small. We need to the LAN via VPN remote client access server.

  I have an ASA5510 with version 7.0. I have configured remote access VPN and it can establish the tunnel with success. But I can not access the server.

  Client VPN is 5.0.07.0290 version. Encrypted packages have increased but the decrypted packet is 0 in the VPN client statistics, after I connected successfully.

  Next to the ASA, I show crypto ipsec sa, just deciphering the packets increase.

  Who can help me?

  Thank you very much.

  The following configuration:

  ASA Version 7.0(7)
  
      !
  
      hostname VPNhost
  
      names
  
      dns-guard
  
      !
  
      interface Ethernet0/0
  
      nameif outside
  
      security-level 10
  
      ip address 221.122.96.51 255.255.255.240
  
      !
  
      interface Ethernet0/1
  
      nameif inside
  
      security-level 100
  
      ip address 192.168.42.199 255.255.255.0
  
      !
  
      interface Ethernet0/2
  
      shutdown
  
      no nameif
  
      no security-level
  
      no ip address
  
      !
  
      interface Management0/0
  
      shutdown
  
      no nameif
  
      no security-level
  
      no ip address
  
      management-only
  
      !
  
      ftp mode passive
  
      dns domain-lookup inside
  
      access-list PAT_acl extended permit ip 192.168.42.0 255.255.255.0 any
  
      access-list allow_PING extended permit icmp any any inactive
  
      access-list Internet extended permit ip host 221.122.96.51 any inactive
  
      access-list VPN extended permit ip 192.168.42.0 255.255.255.0 192.168.43.0 255.255.255.0
  
      access-list VPN extended permit ip 192.168.43.0 255.255.255.0 192.168.42.0 255.255.255.0
  
      access-list CAPTURE extended permit ip host 192.168.43.10 host 192.168.42.251
  
      access-list CAPTURE extended permit ip host 192.168.42.251 host 192.168.43.10
  
      pager lines 24
  
      mtu outside 1500
  
      mtu inside 1500
  
      ip local pool testpool 192.168.43.10-192.168.43.20
  arp timeout 14400
  
      global (outside) 1 interface
  
      nat (inside) 0 access-list VPN
  
      nat (inside) 1 access-list PAT_acl
  
      route outside 0.0.0.0 0.0.0.0 221.122.96.49 10
  
  
      username testuser password 123
  
      aaa authentication ssh console LOCAL
  
      aaa local authentication attempts max-fail 3
  no sysopt connection permit-ipsec
  
      crypto ipsec transform-set FirstSet esp-des esp-md5-hmac
  
      crypto dynamic-map dyn1 1 set transform-set FirstSet
  
      crypto dynamic-map dyn1 1 set reverse-route
  
      crypto map mymap 1 ipsec-isakmp dynamic dyn1
  
      crypto map mymap interface outside
  
      isakmp enable outside
  
      isakmp policy 1 authentication pre-share
  
      isakmp policy 1 encryption des
  
      isakmp policy 1 hash md5
  
      isakmp policy 1 group 2
  
      isakmp policy 1 lifetime 86400
  
      isakmp nat-traversal  3600
  
      tunnel-group testgroup type ipsec-ra
  
      tunnel-group testgroup general-attributes
  
      address-pool testpool
  
      tunnel-group testgroup ipsec-attributes
  
      pre-shared-key *
  
      telnet timeout 5
  ssh timeout 10
  
      console timeout 0
  : end
  

  Topology as follows:

  

  Hello

  Configure the split for the VPN tunneling.

  1. Create the access list that defines the network behind the ASA.

     ciscoasa(config)#access-list Split_Tunnel_List remark The corporate network behind the ASA. ciscoasa(config)#access-list Split_Tunnel_List standard permit 10.0.1.0 255.255.255.0 

  2. Mode of configuration of group policy for the policy you want to change.

     ciscoasa(config)#group-policy hillvalleyvpn attributes ciscoasa(config-group-policy)#

  3. Specify the policy to split tunnel. In this case, the policy is tunnelspecified.

     ciscoasa(config-group-policy)#split-tunnel-policy tunnelspecified 

  4. Specify the access tunnel split list. In this case, the list is Split_Tunnel_List.

     ciscoasa(config-group-policy)#split-tunnel-network-list value Split_Tunnel_List 

  5. Type this command:

     ciscoasa(config)#tunnel-group hillvalleyvpn general-attributes 

  6. Associate the group with the tunnel group policy

     ciscoasa(config-tunnel-ipsec)# default-group-policy hillvalleyvpn 

  7. Leave the two configuration modes.

     ciscoasa(config-group-policy)#exit ciscoasa(config)#exit ciscoasa#

  8. Save configuration to non-volatile RAM (NVRAM) and press enter when you are prompted to specify the name of the source file.

  Kind regards
  Abhishek Purohit
  CCIE-S-35269

• Tunnel from site to Site - Customer VPN to access the site on the other.

  Hello

  How to make this work?

  I want to enable the VPN connection clientens in the Cisco ASA for access network the 10.50.50.0.

  Network information:

  I have a Site of a VPN IPSec Site the Zywall 5 and USG 100 makes (148.148.0.0 and 10.50.50.0). Works great both ways.

  I have the Cisco ASA for VPN clients, clients Gets a 24-address 10.210.210.0/ip and his fine work to access the 148.148.0.0/16 network.
  The 148.148.0.235 is the main firewall/router for the 148.148.0.0 network.
  I created a static route in the 148.148.0.235, saying that for access to the 10.210.210.0 goto 148.148.0.168 network.
  I created a static route in the 148.148.0.168, saying that for access to the 10.50.50.0 network goto 148.148.0.235(I pouvez ping 10.50.50.1 de la boîte de Cisco)
  I created a site for a second on the Zywall 5 and USG 100 which tunnelle the 10.50.50.0 and 10.210.210.0.

  In the splittunneling of Cisco ASA, I have authorized access to the 148.148.0.0/16 network and the network 10.50.50.0/24.

  

  When I open the VPN client and connects to the network and try to network ping the 10.50.50.0 I get the following error:

  (Here I am trying to ping 10.50.50.1)

  5 sep 11 2011 12:36:09 305013 10.50.50.1 NAT rules asymmetrical matching for flows forward and backward; Connection for icmp src, dst outside: 10.210.210.34 inside: 10.50.50.1 (type 8, code 0) rejected due to the failure of reverse path of NAT

  I try to make different NAT rules, but it does not change a thing.

  Help me, what to do, to make it work?

  Thank you.

  Simon

  Hello

  Add this:

  NAT (inside, outside) static source Vejle Vejle destination static obj - 10.210.210.0 obj - 10.210.210.0

  and let me know if it works

  HTH

  Mohammad.

• Custom attributes of access in a bean managed to webcenter 12 c

  WebCenter Portal: Webcenter 12 c

  How can I access custom attributes in a bean managed to webcenter 12 c.. ?

  I found the following blogpost to 11.1.1.8: http://blog.vassit.co.uk/knowledge/access-global-custom-attributes

  It is said to add libraries:

  • Model of WebCenter spaces
  • WebCenter spaces customer

  Cannot find these libraries in snapshot .ee 12 c.
  

  Update:

  The class I used in this blog post only works in 11g and it is an internal class that should be avoided to use as it may change in future versions.

  It is an example of change.

  It is offered in the Public Oracle Fusion Middleware Java QAnywhere for Oracle WebCenter Portal class WCApplicationContext that will allow you to access using Java through many steps.

  WCApplicationContext wcAppCtx = WCApplicationContext.getCurrentInstance();
  WCApplication wcApp = wcAppCtx.getApplication();
  WebCenterType wcMeta = wcApp.getApplicationConfig();
  CustomAttributes customAttr = wcMeta.getCustomAttributes();
  ...
  

  This course may not be available in the libraries provided by JDeveloper 12.2.1 and you include library webcenter-core - api .jar manually.

  I don't know why these classes are in the library and not offered public API catalog of libraries of the ADF in the JDeveloper 12.2.1

  Anyway, as suggested by the use of Vinay and his colleagues the EL Expression as he goes to work.

  Note: I'll blog in my personal blog

  Hope this information helps everybody.

  Kind regards.

• Can't access dashboard 10g

  Hello
  
  We have crearted a dashboard 2 DB1 and DB2. Dashboard DB1, unfortunately giving permissions done us everything
  Presentation server administrators -> no access and restart the services.
  
  Now the administrator login is unable to see the dashboard and
  Unable to see the dashboard to manage interactive dashboards and
  Impossible to see the dashboard + catalogue of presentation of Manage-> shared-> sample sales-> _portal +.
  
  Given that the administrator himself is unable to see the dashboard, we cannot attribute this dashboard to another user.
  
  It is anyway for the administrator see the DB1 or we can change the permissions on the DB1 to presentation server administrators dashboard
  
  Thank you

  check with the Catalog Manager and change of permission for this object of dashboard.

  for example I also did the same thing as given no access to the page view of all the sales of the sample then Administrator lying to seen this page.

  I opened file Manger catalog--> catalog Open--> Offline--> Expand + /-> shared--> Samplesales--> _portal--> Select Portrait page--> right click--> permission--> give full access to the administrator... Restart the services and see the results

  Mark it if it help/answer

• A custom object to access class instance to the

  I created a few (TextInput, ComboBox, CheckBox) instances of the component (created as a public objects) in a Document class and added to the scene.

  Now, I created a class customized to a movieclip in the library and instantiated in the class of document (also a public proceeding).

  I need to access instances of the component in the custom class. How to do this?

  Also, it is advisable to use the ENTER_FRAME event frequently? because if I can't access the instances of components in the custom class above then I will remain no other choice than to use ENTER_FRAME event in the document class whenever I have to change a value in the components...

  So, is this a good practice?

  I think you're overloading the things why don't you just leave your document class adds a TextInput, and your button as his children? Then you can access both of them the class of document with ease.

• User access dashboard

  -All
  
  Can I give a user access to a dashboard, but not give them on-demand access to dashboard in the shared folder. I would love the opportunity to see a dashboard, but not up-to-date (in response) applications in the shared folder for queries in the dashboard.
  
  Is this possible? I can't find a way to do it without giving them access to the shared folder and requests in the dashboard.
  
  I hope this makes sense
  
  Thanks in advance!

  We receive this request a lot of our developer base. For each subject in the catalogue we have actually created a hidden folder that is still hidden in the Production environment (right click on the folder and select properties and then click Hide the folder in the Web catalog). This does not affect the permissions. So in this way, the only way users can get the report is in the dashboard, they try to go to the catalog folder structure and they do not even see the folder containing the report.

  In the Dev Environment we do not hide the folder that once hide you, you don't see when you try to add reports to the dashboard.

  Hope that helps.

• How activate you isolation of customer on 1142N access point?

  I would like to activate the "client isolation" on a stand-alone, autonomous 1142N AP but I don't see that option anywhere in the web interface.  Could someone tell me how to keep associated clients to pass traffic between them on this access point?

  Jerry,

  This document says that PSPF must be defined by vlan.

  However, have you looked at the page-> Radio0 - 802.11N2.4 (or another radio) Network Interfaces to see if you can activate the PSPF? I have a VLAN, so I see this:

  

  but there is a section in the manual on the definition of the PSPF by radio:

  http://www.Cisco.com/en/us/docs/wireless/access_point/12.4_21a_JA1/configuration/guide/scg12421aJA1-chap6-radio.html#wp1038494

  You have VLAN configured on your network? If this isn't the case, you can simply set to the vlan 1 if it is not already as a workaround.

  Best,

  David

  Please evaluate the useful messages and identify the right answers.

• Allow outside access to the subnet to an internal host.

  Sorry Pix beginner,

  I have a server on my network with a 192.168.1.10 address. I need allow 123.45/16 network to access the server withonly 10 open port.

  should I nat address to my server internal, giving it an audience then only open port 22? or is there a better way? If I do this way how can I say only for the inside network and the rest of the world?

  That's what I thought, but didn't know how to add access to this specific network:

  public static public_ip (Interior, exterior) internal_server_ip netmask 255.255.255.255 0 0

  acl_out list access permit tcp any host public_ip eq 22

  can I replace the any part of the host with 123.45.0.0 255.255.255.0?

  Thanks for any help...

  Hello bchyka,

  Your static data and ACL seems ok... If you want to access from 123.45/16 network on the public server, you can replace the ACL as

  access list acl-enabled tcp 123.45.0.0 255.255.0.0 welcome public eq 22

  Otherwise, your Setup program should work fine for traffic to port 22...

  I hope this helps... all the best... the rate of responses if deemed useful...

  REDA

• Sign on custom object outside not in Contacts, opportunities, lead to echo

  Hello

  I'm creating new object to use the sign of the echo. Its a 1 custom objects that look up to another custom object 2 (Parent object).

  I created the template and saved in the library

  Created the model agreement in Echosign,

  When adding recipients in the associated list, when I select the glance to Master object I get the following error.

  "Fields of type Contact not found on the object master."

  Please help me on this

  Hello

  We have a forum post the good that will help you with this.

  See the post on https://forums.adobe.com/thread/1404619

  I hope this helps.