Custom post and then update another field in Acrobat 5

Similar Questions

• Is it possible to access AMX element using the AMS item ID and then update the value of the AMX?

  I created a prototype - where I need to create a static Page AMX element. I have a bean that will have a method of UPDATING: the user interaction with the element AMX fires this UPDATE method, and the method will determine the value of another node AMX. The example is as follows

  <? XML version = "1.0" encoding = "UTF-8"? >

  "< amx:view xmlns: xsi ="http://www.w3.org/2001/XMLSchema-instance"xmlns:amx ="http://xmlns.oracle.com/adf/mf/amx"

  xmlns:dvtm ="http://xmlns.oracle.com/adf/mf/amx/dvt" >. "

  < amx:panelPage id = "pp1" >

  < amx:facet name = "header" >

  < amx:outputText value = "Header-XXX" id = "ot1" / >

  < / amx:facet >

  "< amx:selectOneChoice label = '1' id = 'soc1" value = ""valueChangeListener ="#{SolverLogic.Update1}" > "

  "< amx:selectItem label =" "id ="si667803"value ="-1"/ >"

  < amx:selectItem label = 'O1' id = 'si667804' value="667800.667803.667804"/ >

  < amx:selectItem label = "O2" id = "si667805" value="667800.667803.667805"/ >

  < amx:selectItem label = "O3" id = "si667806" value="667800.667803.667806"/ >

  < / amx:selectOneChoice >

  "< amx:selectOneChoice label ="2"id ="soc753865"value =" ">."

  "< amx:selectItem label =" "id ="si2"value ="-1"/ >"

  < amx:selectItem label = "Ø21" id = "si753866" value="667800.753865.753866"/ >

  < amx:selectItem label = "Ø22" id = "si753867" value="667800.753865.753867"/ >

  < amx:selectItem label = "O23" id = "si753868" value="667800.753865.753868"/ >

  < / amx:selectOneChoice >

  < / amx:panelPage >

  < / amx:view >

  When the user selects 'O1' - 'SolverLogic.Update1' bean - will calculate 'Ø21' must be selected. Is there a way to access the node AMX 'amx:selectOneChoice label is '2' ' - using the ID - id = "soc753865" sound, and then set the value as "value = 'Ø21' '"

  My requirement is that I don't need a DataController object, I have a binary file that contains the business logic, what I need is to create a static page and then use business logic to determine the result of user interaction and then update the user interface accordingly.

  Thank you

  Shailendra

  There is no label but value.

  You must have the below for the value of selectonechoice:

• In Adobe buy screen serial number, the "Download" button directed me to a download Avarto Bertelsmann.  I have too drive my Mac, security s and downloaded files.  Avarto installation was a failure and then found another site from Adobe who succeeded

  In Adobe buy screen serial number, the "Download" button directed me to a download Avarto Bertelsmann.  I have too drive my Mac, security s and downloaded files.  Avarto installation was a failure and then found another site of Adobe which was a success.  Should I be concerned about the unsuccessful Avarto download?

  I've never heard of this person/company/link... but I'm not on Windows, Mac

• Hello Hello. If I have Adobe audition, can I install first program in my laptop, and then in another (if I decide to change my cell phone for a newer laptop)?

  Hello Hello. If I have Adobe audition, can I install first program in my laptop, and then in another (if I decide to change my cell phone for a newer laptop)?

  You can install hearings on as much as you can, there are not limited to the facilities. However if you had bought the individual subscription, you can log in and activate the app as a full version on 2 devices only.

  If you buy a new device and want to activate on the same, all you have to do is simply disconnected from Adobe Creative Cloud application of either of the 2 previous devices, so that you can maintain the number of activations that 2.

  You can switch activation between devices, no problem.

  Let us know if you need more details.

• I currently have CS5 on my mac pro book. I just bought an i mac 21 "and you want to download my CS5 on my new imac, and then update the % of CS. How can I do this? Thank you

  I currently have CS5 on my mac pro book. I just bought an i mac 21 "and you want to download my CS5 on my new imac, and then update the % of CS. How can I do this? Thank you

  Hi Robing12544083,

  Please visit: https://helpx.adobe.com/creative-suite/kb/cs5-product-downloads.html

  Compatibility: Adobe - Creative Suite 5 Master Collection: System requirements

  I hope this helps.

  Concerning

  Megha Rawat

• Help with code to insert, and then update the form table.

  I have a form where a user can add a new record in a table. Here is the procedure for recording button that works very well. But I call another procedure for updating the table with an "if" statement "The SQL code that I use works fine to get the data I'm looking for when I run it in SQL, but the 'if' statement updates all records in the table to ' n ' when some should be"Y". I am new to Oracle forms development (3 months) so it's probably very simple, but I'm stuck and need to get this finished form. Any help is greatly appreciated.
  
  
  SAVE BUTTON TRIGGER PROCEDURE:*.
  
  PROCEDURE SAVE_MM_1099_ADD IS
  
  MM1099_NO NUMBER (10);
  NUMBER OF THE YEAR (4);
  NUMBER OF NOTICE_SEQ_NO (10);
  NOTICE_NAME VARCHAR2 (30);
  TIN_FROM_DB VARCHAR2 (23);
  TSDI_DB VARCHAR2 (1);
  IRS_NTYPE VARCHAR2 (10);
  IRS_NDATE VARCHAR2 (10);
  BU_WH VARCHAR2 (1);
  NO_TIN_NAME VARCHAR2 (1);
  DUP_IRS_NOTICE VARCHAR2 (1);
  G1_IRS_NOTICE_3YR_2BS VARCHAR2 (1);
  
  B_SAVE_ADD boolean;
  
  Start
  
  IF MM1099_NO IS NOT NULL THEN
  
  insert into MM_1099
  (
  MM1099_NO,
  YEAR,
  NOTICE_SEQ_NO,
  NOTICE_NAME,
  TIN_FROM_DB,
  TSDI_DB,
  IRS_NTYPE,
  IRS_NDATE,
  BU_WH,
  NO_TIN_NAME,
  DUP_IRS_NOTICE,
  G1_IRS_NOTICE_3YR_2BS
  )
  values
  (
  MM1099_NO,
  YEAR,
  NOTICE_SEQ_NO,
  NOTICE_NAME,
  TIN_FROM_DB,
  TSDI_DB,
  IRS_NTYPE,
  IRS_NDATE,
  BU_WH,
  NO_TIN_NAME,
  DUP_IRS_NOTICE,
  G1_IRS_NOTICE_3YR_2BS
  );
  
  
  : system.message_level: = '5';
  Commit_FORM;
  : system.message_level: = '0';
  
  END IF;
  
  UPDATE_NUMOCCURTIN;
  
  END;
  
  PROCEDURE CALLED:*.
  
  PROCEDURE UPDATE_NUMOCCURTIN IS
  
  CURSOR c1 (NUMBER NUMOCCURTIN) IS
  SELECT THE YEAR, TIN_FROM_DB, COUNT (TIN_FROM_DB) AS NUMOCCURTIN
  OF MM_1099
  TIN_FROM_DB GROUP, YEAR
  SEEN (COUNT (TIN_FROM_DB) > 0);
  
  CR1 c1% ROWTYPE;
  number of v_recs;
  NUMBER OF NUMOCCURTIN;
  
  BEGIN
  v_recs: = 0;
  
  OPEN c1 (NUMOCCURTIN);
  
  loop
  
  Fetch c1 into cr1;
  When the % notfound c1 or c1% rowcount output > v_recs;
  
  IF cr1. NUMOCCURTIN > 1 THEN
  
  UPDATE MM_1099
  SET DUP_IRS_NOTICE = 'Y ';
  
  ON THE OTHER
  
  UPDATE MM_1099
  SET DUP_IRS_NOTICE = 'N';
  
  : system.message_level: = '5';
  commit;
  : system.message_level: = '0';
  
  END IF;
  
  v_recs: = v_recs + 1;
  
  END LOOP;
  
  CLOSE c1;
  
  END;
  
  For any help or suggestion will be greatly appreciated.

  IF cr1. NUMOCCURTIN > 1 THEN

  UPDATE MM_1099
  SET DUP_IRS_NOTICE = 'Y ';

  ON THE OTHER

  UPDATE MM_1099
  SET DUP_IRS_NOTICE = 'N';

  : system.message_level: = '5';
  commit;
  : system.message_level: = '0';

  END IF;

  There is no WHERE condition in your update, so always update you all THE RECORDS in your table. I guess it must be something like:

  UPDATE MM_1099 SET
    DUP_IRS_NOTICE = 'Y';
   WHERE TIN_FROM_DB=cr1.TIN_FROM_DB
     AND YEAR=cr1.YEAR
  

  Some general order questions about your code:
  Where your variables for your insert statement are filled? looking at your code they will always be NULL.
  Be careful when using the variable exactly as the names of column names. This may cause unexpected behavior (for example when it is used in the UPDATE statements).
  Why engage in the other branch, but not in the branch so?

• Button makes visible subform, and then adds another instance

  Hello

  I have a button that makes a subform visible. Which works very well.

  I would like the button when a user clicks a second time to add another instance of the same subform. Is this possible? I have no idea how start with the JavaScript for this and would appreciate help.

  Thanks in advance,

  MDawn

  Rather than raise the subform, and then adding cases you can do simply by using the instances, then the button does the same thing.

  To 'hide' the subform using the instances, make sure that under binding that the Min County click on and the initial count is set to 0 (zero) - your subform is now hidden by default.

  Change the code you have showing the subform to use addInstance() instead of the presence, using the underscore for the Instance Manager shortcut (you must use the underscore method, because the instance does not yet exist):

  _hiddenSubform.addInstance (true);

  If you remove instances to zero then the subform will disappear again. Doing it this way also has the advantage of reset all data in the subform.

• ALTER table and then updated bulk PL/SQL

  I'm trying to edit the table then update:
  
  declare
  
  number of colCount; *
  
  Start*.
  
  
  Select count (*) from colCount from all_tab_cols where table_name = 'TEST' and owner = 'TEST_OWNER'; *
  
  dbms_output.put_line ('No of columns in the table: ' | colCount); *
  
  
  If colCount = 2 then*.
  
  
  dbms_output.put_line ('Table needs to update'); *
  
  immediately execute ('ALTER TABLE TEST add COL1 VARCHAR2 (100) NULL'); *
  
  Setting a DAY TEST SET COL1 = '123'; *
  Commit; *
  else*.
  
  dbms_output.put_line ("' no modification required"); *
  
  end if; *
  
  end; *
  Oracle complained that "COL1" is an invalid identifier.
  
  I also tried to substitute the UPDATE statement with
  
  * run immediately (' UPDATE TEST SET VCHCHARSET_OUT = 'UTF8' WHERE VCHCHARSETNAME = 'UTF8'); **
  
  and there is something wrong with the construction of an Update statement in parenthesis.
  
  I take the right approach and does not just need to figuire on the syntax of the apostrophes or something else?
  
  Thanks in advance.

  change:

  execute immediate('ALTER TABLE TEST ADD COL1 VARCHAR2(100) NULL');
  UPDATE TEST SET COL1 = '123';
  

  TO

  execute immediate 'ALTER TABLE TEST ADD COL1 VARCHAR2(100) NULL';
  execute immediate 'UPDATE TEST SET COL1 = :1' USING '123';
  

  HTH
  Thomas

• T61 issue of Fan: turns silently to the POST, and then never...

  All,

  Any thoughts on what is happening here?

  I have a T61 with a 15.4 screen "and the Intel video subsystem. After about 10 minutes of operation under Windows, the system shuts down, and after that my wife brought this to my attention, I have observed that there is no flow of air coming out of the vent and the underside of the computer is very very hot. Fan death, right?

  So, I open the T61 upward, leaving the trackpad and keyboard connected and turn on, hoping to check a fan of bad/loud/clogged. Well, the fan starts spinning at the POST and it does so freely and so in silence, and after a few seconds, it turns down, never to go back to the top.

  There is no error message FAN ERROR on the screen at the POSITION either.

  This seems to be more a problem of controller fan than a problem real fan.

  Someone at - it advice or ideas?

  My gut reaction is that simply replace the fan will translate the new fan does exactly the same thing, but maybe someone can put me straight or share their experiences similar here with me.

  Thank you

  Warr

  Turn down the fan after POST is normal, but it should turn on again during or after startup.

  Please check the fan side, if they are blocked by dust. Block the propeller fan with a match or tooth-pick and blow compressed air from the outside through the sides into the heat sink.

  You should also take a look under the radiator and replace the thermal paste on the processor by a new. You can leave the thermal pads if they are not damaged.

• Group by query, and then add another dimension

  Hello guys,.

  I am facing problem while building a query. In this, I do group first, and then add a column with a condition more.

  I have following data in the table or existing query.

  create table tableA (key number (5), newspaper varchar2 (5), varchar2 (5) Blog, available1 number (10), disponibles2 number (1), Type varchar2 (5))

  Insert into tableA values (100, ' 501 ', ' 1501', 10000, 8000, "T1")

  Insert into tableA values (100, ' 501 ', ' 1501', 12000, 0, 'T2')

  Insert into tableA values (200, ' 502 ', ' 1505', 15000, 9000, "T11")

  Insert into tableA values (200, '502', '1505', 8000, 1000, "T12")

  Insert into tableA values (200, '502', '1505', 5000, 1000, "T13")

  Insert into tableA values (300, ' 503 ', ' 1510', 7000, 6000, "T21")

  Insert into tableA values (400, '503', '1510', 6000, 1000, 'T31')

  I created the 'Difference' on the fly using NVL (available1, 0)-NVL(Revenue2,0) as the difference

  Type of difference key1 journal Blog available1 disponibles2

  100 501 1501 10000 8000 2000 T1

  100 501 1501 12000 12000 T2

  200 502 1505 15000 9000 6000 T11

  200 502 1505 8000 1000 7000 T12

  200 502 1505 5000 1000 4000 T13

  300 503 1510 7000 6000 1000 T21

  400 503 1510 6000 1000 5000 T31

  Desired output

  We must show Type (Sun) only when the difference is high and have to group by (Key1, Journal, Blog) while the rank becomes a.

  It is like showing the first 6 columns first and then add the columns of 'Type' later (probably using subqueries).

  Type of difference key1 journal Blog available1 disponibles2

  100 501 1501 22000 8000 14000 T2

  200 502 1505 28000 11000 17000 T12

  300 503 1510 7000 6000 1000 T21

  400 503 1510 6000 1000 5000 T31

  Any idea or detail will be appreciated.

  Thank you

  Use the DUNGEON:

  Select the key,

  Journal,

  blog,

  Sum (revenue1) available1,

  Sum (revenue2) disponibles2,

  NVL (Sum (revenue1), 0)-nvl (sum (revenue2), 0) difference.

  Max (type) keep (dense_rank last order of nvl(revenue1,0) - type nvl(revenue2,0))

  from tablea

  Key, group

  Journal,

  blog

  order by key,

  Journal,

  blog

  /

  TYPE OF KEY JOURNAL BLOG AVAILABLE1 DISPONIBLES2 DIFFERENCE
  ---------- ----- ----- ---------- ---------- ---------- -----
  100 501 1501 22000 8000 14000 T2
  200 502 1505 28000 11000 17000 T12
  300 503 1510 7000 6000 1000 T21
  400 503 1510 6000 1000 5000 T31

  SQL >

  SY.

• Why have I not the properties stocks, Format, validate and calculate for text fields in Acrobat DC?

  I'm looking into buying acrobat dc but note that when you make a form, text fields is more options above when property a right click. This removed the DC?

  No, he's still here.

  Try this: click Tools - prepare the form and then click on "More" to the right of the window, click "return to Acrobat Form.

• How to remove a desk Goflex usb 3.0 on a Windows 2008 R2 Standard Server adapter and then plug another server save desk Goflex usb 3.0 adapter?

  I am an intern for a company and they asked me to pass their already plugged into the adapter of desk Goflex usb 3.0 backwards Server Office Goflex USB 3.0 adapter. They mentioned that I unplug before the one that is already attached to the Windows 2008 R2 Standard Server, I want to stop the automatic updates and cut it (I don't know if they mean turn off Office Goflex usb 3.0, a server adapter or updates).

  Then plug back up Server Office Goflex usb 3.0 adapter. When it is plugged in that they said to go back to the top.

  My main question is how to do it safely with ruin them anything? My second question is what are the steps to remove the device already plugged into the computer? My third question is, what are the steps to configure the server to the top device once I plug?

  They have done this before, I can tell because there are 2 dates on a note of sticky notes on the backup server. I know that the Goflex desktop adapter is not really a matter of Microsoft but I tried to contact Seagate and they told me to contact Microsoft.

  Thank you!

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• Startup repair and then updated conf. over and over again. operating system is vista.

  power on laptop goes to the Startup Repair and Configuration of updates then stops a restart, only to do it again and again and again.

  Follow the instructions and make a Bootable CD from him.

  Make the BOOTABLE CD into the computer that you downloaded for.

  Read the advice and follow it.

  Advice is given for a reason, because that is how the manufacturers recommended for:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use it.

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  And if this does not resolve the problem, transfer your question in the Forum of Windows updates:

  Windows Update Forum:

  You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When repost you it describe exactly what happens when you try to update.

  In this way, you will receive the best help.

  See you soon.

  Mick Murphy - Microsoft partner

• Newbie, trying to close and then choose another file

  Hello

  I'm doing a very simple script just to close a file and open a specific folder so I can choose another. Finally, I would like to learn much more, but even if that will allow me to save some work.

  Closes the file that follows and shows the right folder but when I click on the file I want to open the name appears in the "File name" box, but it does not open, and I get an error message. If I specify the name of the file with the path, it opens but I want to be able to choose the file.

  app.activeDocument.close (SaveOptions.no);

  File.openDialog ("path");

  I searched a lot a response but perhaps not using the right conditions?

  Thank you

  Gary

  With File.openDialog (), you open the last used folder. To open a folder specified, use openDlg() instead. For example:

  f = Folder ('/d/test').openDlg ("Select a file");
  if (f !== null) {
    app.open(f);
  }
  

  See the 'JavaScript ToolsGuide CC' (helping the ESTK) file for details. It is useful filter the list of files. For example, to display only the indd files, use this:

  f = file ('/d/test').openDlg ('Select files', ' InDesign: * .indd ');)

  Peter

• Assign values to a field to another field in Acrobat DC

  If I scan a document with the repetative fields how can I assign the value of the first entry to all other cases.  Or if I have a 10 page document with the "Last Name" on each, how do I register my name on the first page and have it entered on the next 9?

  You just give the text fields of the same field name, and it will be done automatically.