Startup repair and then updated conf. over and over again. operating system is vista.

power on laptop goes to the Startup Repair and Configuration of updates then stops a restart, only to do it again and again and again.

Follow the instructions and make a Bootable CD from him.

Make the BOOTABLE CD into the computer that you downloaded for.

Read the advice and follow it.

Advice is given for a reason, because that is how the manufacturers recommended for:

Download the ISO on the link provided and make a record of repair time it starts.

Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

When you have changed that, insert the Bootable disk you did in the drive and reboot.

http://www.bleepingcomputer.com/tutorials/tutorial148.html

Link above shows what the process looks like and a manual, it load the repair options.

NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

Read all the info on the website on how to create and use it.

http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

It's a very good Vista startup repair disk.

You can do a system restart tool, system, etc it restore.

It is NOT a disc of resettlement.

And the 32-bit is what normally comes on a computer, unless 64-bit.

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

And if this does not resolve the problem, transfer your question in the Forum of Windows updates:

Windows Update Forum:

You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

When repost you it describe exactly what happens when you try to update.

In this way, you will receive the best help.

See you soon.

Mick Murphy - Microsoft partner

Tags: Windows

Similar Questions

  • After installing Avast AV my computer cannot load Vista. HE continues to go to the Startup Repair, and it gives me an error of windows registry.

    ORIGINAL TITLE: Vista problems

    Hi I was wondering if I can get a few hekp with this question. After installing Avast AV my computer cannot load Vista. HE continues to go to the Startup Repair, and it gives me an error of windows registry. I idid a debbug and had no errors on the disc. Safe mode does not work. I tried restore to earlier date and nothing, went to the command prompt and type chkdsk /F. c: here's what I got the chkdsk cannot run because the volume is in use by another process. CHKDSK may run if this volume is dismounted first. ALL OPEN GERE to this VOLUME WOULD then BE INVALID. And then he asks me if I want to force a disassembly. Press o and had. Windows check the file system and found no problem. The last line says failure to transfer the messages saved in the log of the events with the 50 State. It's all I have.

    Hello

    What is the exact error message related to the windows registry?

    I suggest you follow the steps mentioned below:

    Method 1:

    Remove all external factors with the exception of the keyboard and mouse.and restart the computer and check if the problem occurs.

    Method 2:

    Restart the computer in last known good configuration (LKGC) and check if the problem persists. Follow the steps in the link:

    http://Windows.Microsoft.com/en-us/Windows-Vista/using-last-known-good-configuration

    Method 3:

    If the previous step fails, follow the steps in the link:

    http://support.Microsoft.com/kb/927391

  • I have Windows 7, my computer does not start. I did the Startup Repair and he won't fix it. I did the system configuration information

    I have Windows 7, my computer does not start. I did the Startup Repair and he won't fix it. I did the system configuration information. and that did not help. What to do now? The comment of Bios makes me fear that it could damage my computer forever. What should do? Help, please

    Hi Alan,

    Thanks for posting your query in Microsoft Community.

    I understand that the computer does not restart even after running Startup Repair and I will be happy to answer your query. I appreciate the efforts made to try to make it work. Let me ask you;

    • How do you run the Startup Repair?
    • Do you have Windows 7 repair disc?
    • Remember to no particular change in the computer before the show?
    • Have you plugged an external equipment, except the keyboard and mouse?
    • You are able to start the computer in safe mode?
    • What is the brand and model of the computer?

    Note: BIOS change / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

    There could be several reasons why he's not leaving including hardware as well. In addition, it could be because the master boot record (MBR) has been damaged. When you try to use the Startup Repair tool to repair the MBR, the Startup Repair tool indicates that no problem was found or it does not work yet.

    If you have any connected USB flash drive or other external devices connected to the computer, if you please, remove them and try to run the Startup Repair tool.

    If you haven't tried using Windows 7 repair disc, you can try the following:

    1. Insert the Windows 7 disc
    2. restart your computer
    3. When asked if you want to boot from your DVD player, do it.
    4. Select your language, click Next.
    5. click on repair your computer
    6. Select the operating system you want to repair.

    You can also perform the system restore by selecting the restore point when you think it worked very well. System Restore, choose advanced options using the disc.

    Important: When you use system restore to restore the computer to a previous state, the programs and updates that you have installed after this date are deleted.

    I also recommend to contact the computer manufacturer to get the done diagnostic equipment.

    Hope this information is useful. Please feel free to answer in the case where you are facing in the future other problems with Windows.

  • I can't open a picture jpg with my PS. I have already created another profile to my Mac, reinstalled Ps and one I updated the latest version of the operating system. Still does not open JPG. I want to know what to do next.

    I can't open a picture jpg with my PS. I have already created another profile to my Mac, reinstalled Ps and one I updated the latest version of the operating system. Still does not open JPG. I want to know what to do next.

    Then, you install Camera raw version 9.4 from this link: Camera Raw of Adobe Photoshop CC and CS6 Installer

  • Want to download 10 W but not able to do that, during installation, a problem arises and the previous operating system is restored.

    My laptop is preinstalled with Windows 7 Home Basic.  At the free launch Windows 10 I downloaded the same and after 2 months, the hard drive crashed.  The repair shop trying to fix formatting, but could not revive.  This is why I bought a new hard drive and repair charge shot Windows 7 Ultimate edition.

    Now, I want to download 10 W but not able to do that, during installation, a problem arises and the previous operating system has been restored.  When I posted the question about how to solve this problem, I was told to try the download by way of USB/ISO file.

    Now my question is that

    one) can I reload Windows 7 Home basic as I have the product key?

    (b) I can then download Windows 10 according to the normal procedure?

    I'm not tech savvy, afraid to download files in USB and then load into the laptop, so this question.

    Concerning

    S Subramanian

    Original title: Windows 7 Home basic

    You can directly download Windows 10. Windows 7 complete edition currently installed is not genuine.

    When you upgraded from a previous version of Windows, what happened is that (your PC) hardware will get a digital right, a unique signature of the computer which is stored on the Microsoft Activation servers. The real Windows 7 or Windows 8 license you were using previously will be exchanged with a key to the diagnosis.

    Whenever you need to reinstall Windows 10 on this machine, go just to reinstall Windows 10. It automatically reactivates.

    Therefore, there is no need to know or get a product key, if you must reinstall Windows 10, you can use your Windows 7 or Windows 8 product key or use the reset function in Windows 10.

    Step 1: How to download official Windows 10 ISO files

    Step 2: how: perform a clean installation of Windows 10

  • VMPlayer newbie - switch back and forth between the host and the guest operating system

    I am newbie to VMPlayer. I just installed VMPlayer 3.0.0 build-203739 on Red Hat Linux 5 (host). Then I created a VM comments Kubuntu (8.10). So far so good. In the VMPlayer window, I selected 'play Virtual Machine '. After this, the host operating system controls disappeared and I could see a taskbar on the top of my screen and I could also see Kubuntu startup (in an area of the small window in the center of the screen). The problem I'm running is that I'm not able to navigate outside of this area of the small window. I'm not even able to click/Select the taskbar of VMPlayer top of the screen. The mouse movement is limited to the area of the small window. How to and fro my host and the guest operating system? Is there a key combination? I finally had to stop my VM guest to return to the control of my host system. I guess it's a problem quite newbie that I am running. Any help would be greatly appreciated.

    Hello, welcome to the forum

    Host Windows to switch between comments and the OS (when you are in the guest operating system), you must use ctrl + alt.

    According to this link , it's the same thing in Linux host too.

    >Default VMware Player uses key combination Ctrl + Alt to jump out of the guest. Then CTRLAltdel is accessible via theAltInsert command. If you find this annoying, you can change the jump shortcut to CtrlAltshift by adding the following lines to your ~/.vmware/preferences:

    > pref.hotkey.shift = "true".

    > pref.hotkey.control = "true".

    > pref.hotkey.alt = "true".

    After your installation OS in the virtual machine, install "VMware Tools" on it so you will get better performance and some improvements (like moving your mouse out of guest to your host operating system operating system and Vice Versa, or be able to copy beyond host/guest, better resolution on reviews and...)

    I hope it helps a bit.

    -= If you have found this note/response useful, please consider awarding points to 'Correct' or 'useful ' = -.

    -= If there is a mistake in my notes, please correct me! =-

    -= Thank you =-

  • How to: format and reinstall the operating system

    Original title: is there a virus that downloads all the images that appear on windows xp family within 24 hours, I have acquired 17 000 images and used to my PC I want to enter windows in any mode

    I can't navigate what whether in safe mode with or without networking. How to flatten the system, which dates back to the original state that I'm not bothered about registering files images etc want just my PC to work

    Hi wendyspeariett,

    1. you receive an error message when you start in safe mode or normal mode?

    2. did you of recent changes on the computer?

    If you have access to the internet in safe mode with network, then you will need to scan the computer to remove all infections from the computer and check if that helps.

    http://www.Microsoft.com/security/scanner/en-us/default.aspx 

    You can also use Microsoft Security databases to scan your computer

    http://Windows.Microsoft.com/en-us/Windows/products/security-essentials

    If you want to format new Windows XP installation, you can move forward.

    A new installation is to remove all data from your hard drive repartition and reformat the hard drive and reinstall the operating system and programs empty (clean) hard disk.

    How to install or upgrade to Windows XP

    http://support.Microsoft.com/kb/978307

    How to partition and format a drive hard using the Windows XP Setup program

    http://support.Microsoft.com/kb/313348

  • Can I have Windows 7 Professional and Windows 10 operating systems on the same lap top

    Can I have Windows 7 Professional and Windows 10 operating systems on the same lap top

    Yes, you can, but not with the free upgrade, you will need to purchase a full license for Windows 10 to do this.

    Step 1: purchase a license:

    Buy Windows 10 family/professional edition

    Step 2: Download Windows 10 and create a bootable copy

    How to download official Windows 10 ISO files

    Step 3: Create the partition then install dual-boot configuration:

    How to: install a Setup to dual-boot with Windows 10 and earlier versions of Windows

  • This disc contains a "UDF" file system and requires an operating system that supports the ISO-13346 "UDF" file system specification.

    I've seen other posts on this topic. Nothing seems to work, so I thought I would explain my situation.

    The machine is new. Win7 64 bit company. The problem I see is that I try to load some versions of Visual Studio on the new machine. However, none of the discs auto-run using my local internal DVD drive. They all have a Readme file with the message "this disc contains a"UDF"file system and requires an operating system that supports the ISO-13346"UDF"file system specification."

    I know that the discs are good, I used the on my old machine, and I can always use them on other machines I tested.

    The real kicker here is that I can plug an external USB DVD drive... and then the local drive starts to read the installation discs! It's like making this action allows something else in the machine.

    Also, I even restarted the machine mode of diagnosis (without external DVD drive attached)... and restart, the drive would read the installation discs. BUT when I do a full stop and then turn on the machine upward, the local drive gives me the same readme file. Again, it is as if something gets activated, and then reset to a complete stop.

    I am at a loss of what to check then. Real head-scratcher, because I know the drive works and the machine can recognize the drive and even read installation discs.

    I do not have the applications installed on the machine of DVD burning, so I don't think there is a conflict.

    Any suggestions are welcome.

    Thanks in advance!

    Hello

    The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums so the problems occurring on Windows 7 Enterprise.

    Forum TechNet Windows 7

    Hope this information helps.

  • BlackBerry smartphones, I can't enter Thai language. How can I upgrade and choose the operating system for my BB9900?

    How can I upgrade and choose the operating system for my BB9900? I need thai input but on the site of H3G Italy software download is not all the language version. I don't know from which site to download.

    Hi niranaja

    If your device is running always on OS 7.0 then try 7.1 any Pack OS carrier that also supports Languages.But of Southeast Asia before opening your computer and uninstall any previous packs if installed OS on it. After that, try this:

    1. download and install on your PC a pack OS with any language by carriers

    • (Make sure you download for the same phone model)

    2. download and install the latest version of BlackBerry desktop from here BlackBerry desktop software software

    Then using software office perform your full backup of your device.

    3. search your drive C: Vendor.xml and delete them, there may be one or two vendor.xml (on changing your Pc folders option to show the hidden files/folders ):

    • C:\Program Files (x 86) \Common Files\Research In Motion\AppLoader
    • C:\Users\Windows UserName\AppData\Roaming\Research in Motion\BlackBerry\Loader XML

    4. go into C:\Program Files Research In Motion\AppLoader. (For Vista or Windows 7 64-bit, the path will be C: > Program Files x 86 > common files > Research In Motion > AppLoader) double-click on Loader.exe.

    Upgrade will continue then after Installation of the new OS restore your BlackBerry Desktop backup

    Software.

    Once done open BlackBerry Desktop Software (7.1) > select Applications. > in the section of language and support for entry , select the language to be added to the BlackBerry smartphone (a + will appear next to the language to install) > click apply.

    KB13067 : How to get smart BlackBerry phone language packs.

    So please try it and let us know.

    Prince

    _____________________________________________________________________________

    Click 'Like' If you want to thank someone.

    If problem resolves mark message (s) as a 'Solution', so that others can use.

  • install windows 7 from download - this disc contains a "UDF" file system and requires an operating system

    I downloaded Windows 7 from MS with a liscence on a computer running Windows 8. I wrote the ISO on a DVD but when I try to read every DVD I see is a readme file that contains the text "this disc contains a"UDF"file system and requires an operating system
    that supports the ISO-13346 "UDF" file system specification. "

    Former title: installation of windows 7 download

    Use the following to burn the. ISO to a blank DVD file:

    After graduating the .iso file, you use the Microsoft .iso to USB/DVD tool to create a bootable DVD or USB (requires a blank DVD or USB flash to at least 4 GB key).

    You can also burn the. ISO natively in Windows 8 file:

    Burn a CD or DVD from an ISO file

  • I just had to wipe everything on my mac and reinstall the operating system.  How can I get my products Adobe Creative Suite back on my computer?

    I just had to wipe everything on my mac and reinstall the operating system.  How can I get my products Adobe Creative Suite back on my computer?  I do not have a disk.  I think I bought the package online.  I don't see anywhere to re - download.  The purchase was made in 2011.

    Any help?

    Available downloadable Setup files:

    Download and installation help links Adobe

    Download and installation to Prodesigntools help links are located on the most linked pages.  They are essential; especially steps 1, 2 and 3.  If you click on a link that does not have these listed steps, open a second window by using the link to Lightroom 3 to see these "important Instructions". window using the Lightroom 3 link to see these "important Instructions".

  • Client Oracle for Oracle database 10g and Windows 2003 operating system...

    Hi all
    I need an Oracle Client for Oracle database 10g and Windows 2003 operating system.
    I searched www.oracle.com it there as much of products so basically that I got confused.
    Could you guide me please?

    Hello

    Here is the link: download (Oracle Database 10g Release 2 (10.2.0.1.0) customer - 10201_client_win32.zip (475,090,051 bytes) (cksum - 946434250)).

    Oracle Database 10g Release 2 (10.2.0.1.0)
    http://www.Oracle.com/technology/software/products/database/Oracle10g/htdocs/10201winsoft.html

    Kind regards
    Hussein

  • My laptop starts to turn on at startup repair and it says tht something's wrong with the C:\ drive

    I have a Sony Vaio laptop and before it worked fine, but then all of a sudden all the applications I turn kept which crashing then crashed the computer laptop everything I restart the laptop everytime that happens and now it only when I turn it on do Startup Repair open saying tht there is a mistake with the C:\ drive and I need to contact the administrator then turns off, and the same thing is repeated when I turn it on reapair start again. If someone could help me please I would be very grateful, thank you for your time

    First test the hard disk for physical errors. Test the hard drive with a diagnostic utility downloaded from site of the disc mftr. or use SeaTools for BACK of Seagate. You create a bootable CD with the files you download. You will need a third party burning software to do as the free ImgBurn, Nero or Roxio. Burn as an image, not in the form of data.

    http://www.ImgBurn.com

    http://www.Seagate.com/www/en-us/support/downloads/SeaTools/seatooldreg
    http://Seagate.custkb.com/Seagate/CRM/selfservice/search.jsp?docid=201271 (how-to)

    Boot with the CD that you have done and do a full test of the reader. The physical tests fail, replace it. MS - MVP - Elephant Boy computers - don't panic!

  • err3 Err1 on startup. system will not f8 or f11 and says no operating system found? What the? A windows vista family premium, a second ago...?

    I hope someone can help.  I can't fly on the f11 or f8 function keys. I have tried bios updated default did not work.  Says Bios and video are shawdowed.  No TPM or TPM has problem.  Fixed Disk0 and fixed Disk1 - F.2a Phoenix BIOS 4.0 Release 6.1 version.  So can't do the system restore? Where is my operating system?  I lost everything in C and D drives?  System will not start or start at all.  Do I have to re - install the OS Windows Wista?  Work about to go back and fix?

    Hello SteveO_1968,

    To run the Bootrec.exe tool, you must start Windows RE. To do this, follow these steps:

    1. Put the Windows Vista installation disc in the disc drive, and then start the computer.
    2. Press a key when you are prompted.
    3. Select a language, a time, a currency, a keyboard or an input method, and then click Next.
    4. Click repair your computer.
    5. Click the operating system you want to repair, and then click Next.
    6. In the System Recovery Options dialog box, click command prompt.
    7. Type Bootrec.exe, and then press ENTER.

    Note To start the computer from the Windows Vista DVD, the computer must be configured to start from the DVD drive. For more information on the configuration of the computer to start from the DVD drive, see the documentation provided with your computer or contact the computer manufacturer.

    Bootrec.exe options

    The Bootrec.exe tool supports the following options. Use the option that suits your situation.

    Note If rebuilding the BCD does not resolve the startup problem, you can export and delete the BCD, and then run this option again. In doing so, you ensure that the BCD is completely rebuilt. To do this, type the following commands at the command prompt Windows RE:

    • bcdedit/export C:\BCD_Backup
    • c:
    • Boot CD
    • BCD attrib s h - r
    • Ren c:\boot\bcd BCD.old
    • Bootrec /RebuildBcd

    / FixMbr

    The /FixMbr option writes a MBR compatible Windows Vista on the system partition. This option does not overwrite the existing partition table. Use this option when you need to solve problems of corruption of MBR, or when you need to remove the non-standard code from the MBR.

    / FixBoot

    The /FixBoot option writes a new boot sector on the system partition by using a boot sector that is compatible with Windows Vista. Use this option if one of the following conditions is met:

    • The boot sector has been replaced by a non-standard Windows Vista boot sector.
    • The boot sector is damaged.
    • An earlier Windows operating system has been installed after the installation of Windows Vista. In this scenario, the computer starts by using Windows NT Loader (NTLDR) instead of Windows Boot Manager (Bootmgr.exe).

    / ScanOs

    The /ScanOs option scans all disks for installations that are compatible with Windows Vista. In addition, this option displays the entries that are currently not in the BCD store. Use this option when there are installations of Windows Vista which is not in the Boot Manager menu.

    / RebuildBcd

    The /RebuildBcd option scans all disks for installations that are compatible with Windows Vista. In addition, this option allows you to select the facilities you want to add to the BCD store. Use this option when you need to completely rebuild the BCD.

    "In the end the love you take is equal to The Love You Make" (The Beatles last song from their latest album, Abbey Road.)

Maybe you are looking for