Custom while logging an error message.

Similar Questions

• We get an error "could not create a new partition or find existing. "For more information, see the Setup log file" error message "while trying to install Windows 8

  * Original title: 8 victory moved - Error Message: failed to create new partition...

  I have Win XP on my Dell Dimension 5150, which is the dual boot with Linux Mint 12 Lisa and this is my favorite of the bunch.

  I bought the DVD of 8 Pro Windows by an Australian retailer.

  Win XP is on a 39 GB partition with other application files. I had to delete several files to get the free space necessary to WIN 8 and finally finished by formatting the partition and passes for a COMPLETE new installation.

  Unfortunately, I now get the "failed to create new partition or find existing. For more information, see the Setup log file"error message. I can't find a Setup log file that I do a boot from the DVD.

  I tried to delete all external drives and other USB devices, including my Modem but my Wired USB keyboard/mouse.

  Two internal HARD drives are as follows:
  Disk 0 Partition 1-110 GB - system (LINUX)
  Disk 0 Partition 2 - 3.5 GB - logical

  Disk 1 Partition 1 - 47 MB - OEM (reserved) [DellUtility]
  Disc 1 2:Win - 39.1 GB - System Partition
  1 3 disk partition: DATA - 39,1 GB - logical
  Disk partition 1 4:OfficeProgs - 19.5 GB - logical
  Partition on drive 1 logical - 39.1 GB - 5:PROJECTS
  etc to score 8 with 9 MB of unallocated space.

  I have tried both 64 and 32 discs with the same result.

  As I have now is no longer no matter what Windows on my computer, what's the next step? If any ;-)

  Hello

  I solved the problem. It seems that you can not install on a secondary partition with in an earlier version of windows. You must restart the computer and run the installation from a dvd or other media.  Once you get the installation running you should be able to install on another partition without any problems.

  Nice day

• Unable to connect with iTunes log.  Error message says "Apple ID is not associated to a provider of content in iTunes Connect.

  GGetting log error message ' login Apple is not associated with a content in iTunes Connect provider.»  Apple ID works fine everywhere else I use.  Not a mistake of the ID.

  Hi sodypop2!

  I can understand that you try to connect to iTunes Connect, and I'm happy to get to the right place to address this for you.  iTunes Connect is supported by Apple Developer Support, so you will want to use this link for all iTunes Connect issues:

  iTunes Connect - Support - Apple Developer

  Please take contact with Apple Support communities.

  See you soon!

• Customer with application startup error message

  I have a client who receives the error message following when my application starts.  I checked and other people with the same model and the operating system may not be problems.  I delete the app and reinstall it, but it doesn't seem to help.  I was wondering if someone else has faced a similar problem.

  Error starting application class.net.rim.device.api.ui.container grid field manager not found
  

  I submitted this to the RIM.  They go for me SUPER fast.  I was impressed by Garrett.

  Bad news, RIM forgot to include gridFieldManager in the 5.0.0.602 output for the 9700, which is be the 9700 version for most carriers, as I can tell.  They checked that older operating systems are OK and the new 5.0.0,714 OS is OK.

  Unfortunately, it is a very big problem for me.  To make it worse, I don't think that App World has a way to send the release notes for customers. VERY short-sighted.  I think that someone way more thought App Word and made it so complicated that sucks for developers and customers.

  Thank you all for your comments.  It is much appreciated.

• Capture custom triggers in database Error Messages

  Hello world
  
  
  When I pulled a trigger, it should show that the message personalized RAISE_APPLICATION_ERROR
  instead of showing all messages...
  

  ORA-20103: We Cannot Delete the emp_id 5610
  ORA-06512: at "emp_id", line 89
  ORA-04088: error during execution of trigger 'delete_emp_id.trg'

  I want to only show the custom message

  We Cannot Delete the emp_id 5610

  Thanks in advance

  Not possible AFAIK.

  Instead of RAISE_APPLICATION_ERROR, define a custom exception, call him and just print on the console (with dbms_output). You cannot get out of pop.

• Receives the following in observer logs event error message: error side by side with the event ID 80.

  Original title: SideBySide error

  I have the tracking error in my logs, how can I fix the problem?

  Log name: Application
  Source: SideBySide
  Date: 16/08/2014-04:30:35
  Event ID: 80
  Task category: no
  Level: error
  Keywords: Classic
  User: n/a
  Computer: Problemchild
  Description:
  Activation context generation failed for "C:\Program Files (x 86) \LG Electronics\LG PC Suite\LGPCSuite.exe. Error in manifest or policy file "" online. A component version required by the application conflicts with another version of the component already active. Contradictory elements are: Component 1: C:\Windows\WinSxS\manifests\x86_microsoft.windows.common-controls_6595b64144ccf1df_6.0.7601.17514_none_41e6975e2bd6f2b2.manifest. Component 2: C:\Windows\WinSxS\manifests\amd64_microsoft.windows.common-controls_6595b64144ccf1df_6.0.7601.17514_none_fa396087175ac9ac.manifest.

  The event XML:
  http://schemas.Microsoft.com/win/2004/08/events/event">
   
     
      80
      2
      0
      0 x 80000000000000
     
      49027
      Application
      Problemchild
     
   
   
      C:\Windows\WinSxS\manifests\x86_microsoft.Windows.common-controls_6595b64144ccf1df_6.0.7601.17514_none_41e6975e2bd6f2b2.manifest
      C:\Windows\WinSxS\manifests\amd64_microsoft.Windows.common-controls_6595b64144ccf1df_6.0.7601.17514_none_fa396087175ac9ac.manifest

  
      C:\Program Files (x 86) \LG Electronics\LG PC Suite\LGPCSuite.exe

  Hello

  Download the latest version of c ++ did not work...

  I have disabled startup items that helped me to solve the problem. I removed the following LG. This suite LG was the origin of the problem. I will never install in the future.

• iDrac - full Board.Log System Error Message said

  Board of Directors of the salt system: sensor of the event log for Board.Log comprehensive system has emerged.  I got this message on the front of my Dell T610 server.  What is the problem and how to reset the log?

  Thank you

  Certainly,.

  OpenManage Server Administrator (OMSA) is a management software systems that you can use to monitor and manage the server.

  You can download your version here - http://www.dell.com/support/drivers/us/en/04/DriverDetails/Product/poweredge-t610?driverId=CWHRG&osCode=LHS64&fileId=3267736217&languageCode=EN&categoryId=SM

  Once installed, you will need to restart. Then after restart, open Admin Server icon on the desktop, and then select JOURNAL of MATERIAL under System. From there you can delete it.

• FoxPro .dbf database error message

  Hello people,

  I have a customer who received an error message when applying Insider Foxpro, Foxpro v9.0 error msg: "Unrecognized Database Format".

  My client has pointed out, that there has been a power failure and the problem emerged after it has restarted the PC.

  It seems that corruption the foxpro database caused by a power failure.

  Suggestions, friends...

  
  This issue is beyond the scope of this site and must be placed on Technet or MSDN

  http://social.technet.Microsoft.com/forums/en-us/home

  http://social.msdn.Microsoft.com/forums/en-us/home

• Error message: "logon user interface host windows stopped working. & configuration of updates fail

  Several days ago I started having the application error "windows logon UI host has stopped working".  This happens when I connect. and also on the update of windows, when they tried to configure windows update it says "failure configuration update of windows. Returning from the changes. and it restart the whole system again.

  For your information, I use windows 8. so help me solve this problem. TQ

  Hi ZakwanSalleh,

  Thank you for choosing Windows 8 and join us on our community.

  From your description, I understand that you get an error message during newspaper saying "logon user interface host windows stopped working" and after the update of Windows as "failure of windows update." Returning from the changes.

  We get the Windows log on error message if the computer is running out of memory. Then I suggest you perform these methods and check.

  Method 1:

  I suggest you perform a clean boot and remove all unnecessary programs installed on your computer.

  Clean boot: To help resolve the error and other messages, you can start Windows by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts. Here is the link for your reference perform the clean boot.

  http://support.Microsoft.com/kb/929135

  Note: Please go through step 3 KB to maintain the computer to a normal startup after you resolve the issue.

  Method 2:

  I also suggest you to run a sfcscan and check.

  The sfc/scannow command. analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions. When the analysis is complete, the System File Checker tool indicates whether integrity violations were found. If integrity violations are detected, the System File Checker tool allows to challenge violations of integrity

  Follow these steps to run sfcscan.

  a. press Windows + X keys and click / tap on (Admin) command prompt.

  b. in the elevated command prompt, type sfc/scannow, and then press ENTER.

  NOTE: It can take some time to finish the race.

  For the error "failed windows update Setup. Revenant changes"I suggest you follow the steps in the article and check. Here is the link for your reference.

  Error: Failed to setup of the Windows updates. Restoration of the changes. Do not turn off your computer when you try to install Windows updates

  http://support.Microsoft.com/kb/949358#method3

  It will be useful. For other related issues in Windows area it always welcome in our community.

• Redirect OAF page after an error message

  Hi all
  
  I extended a controller to validate user input in an array of records using Add another line on a page and display the custom error message. It works very well.
  
  Then, there is a Cancel button, the button apply to throw and save the entry.
  
  My requirement is if there is an error message that is customized during the data entry, pressing apply button it should display the error message and must not record the input line. But it is to save even if the custom error message exists.
  
  But if there is an oaf planted on pressing apply button error message it displays the same error message.
  
  Apply button has a controller that are entrusted to him. How to get the same functionality for the custom from the seeded error message?
  
  Thank you

  Hello

  Use String m_inventoryItemIdStr = row1.getInventoryItemId (m:System.NET.SocketAddress.ToString ());

  Kind regards
  Out Sharma

• I found in my logs event before I even had my PC delivered they had a problem installing Windows 7 Premium 64-bit, and this error message is listed under Windows-Setup: 0xC000000D

  I have nothing else problems with my new system had in the past 2 months and have done two factory restores.  I get the "your video driver has failed but recovered" several times a day, it progresses freezing and, sometimes, the old bue screen.  I worked with the manufacturer and they took all original event logs before we did the restoration of 1.  After a Microsoft Update, it was even worse that I did a second on 10/18.  You went out with an update again and things seem to be OK until yesterday when it started happening again and again.  So I went in the event logs to see what they said and I found the error message a week before the system arrived even at my doorstep.  It seems whenever I did a factory restore it just keeps reloading the same problem!  Since they send you the REAL DISKS any more there is no way own things off and really repair the enrire thing - if it's still possible for an average user.  Other information: Journal name Microsoft Windows Kernel-EventTracing/Admin Source connected to kernel-EventTracing 2010-08-06 19:53:04 Evnet 3 category of task ID: Session-level: error keywords: Session OpCode: stop

  There are several other error messages that appear on a regular basis, not to mention the display driver one - that is the most obvious to me.  I saved the newspaper while they cannot get lost.  You can see that this same error message when I did the last factory restore on 10/18 is still original and mistakes so I could look at just to be reinstalled again.  My question is what is it, can it be repaired or do you need to strip ALL of this machine?  And while you will never say so, shouldn't they have taken this BEFORE they sent this computer to a client?

  Check with your PC vendor to determine if updated video drivers are available.
  Download and install if necessary. The video drivers are often buggy when
  originally published, so what you see is not unusual. I hope it's a
  minor issue if you had not seen the papers you would have noticed.
   
  "PC Nana" wrote in message news: c8aef944-7d5d-4888-8be5-839e71166366...
  > I had any other problems with my new system over the last 2 months
  > and have done two factory restores. I get the "your video driver has.
  "> failed, but recovered" several times a day, it progresses to the gel and
  > sometimes the old screen bue. I worked with the manufacturer and
  > they took all the original event logs before we did the 1st
  > Restore. After a Microsoft Update, it got even worse then I did a second
  > 10/18. You went out with an update again and things seem to be OK
  > until yesterday when it started to happen again and again. So I went in
  > the event set myself to see what they said and I got the error message
  > a week before the system arrived even at my doorstep. It seems
  > whenever I did a factory restore is just keeps the same reload
  > problem! Since they send you the REAL DISKS any more there is no way
  > own offshore things and really repair the enrire thing - if that's even
  > possible from an average user. Other information: name of the journal
  > Microsoft-Windows-Kernel-EventTracing/Admin Source Kernel - EventTracing
  > Connected on 06/08/2010 19:53:04 Evnet 3 category of task ID: Session level:
  > Error keywords: Session OpCode: stop
  >
  > There are several other error messages that appear on a regular basis
  > Also the display one - driver is it more obvious to me. I have
  > saving the newspaper while they cannot get lost. You can see that
  > when I did the last factory restore on 10/18 this same error message is
  > here and still the original errors so I could just look in
  > reinstalled again. My question is what is it, can it be repaired or do
  > you must strip EVERYTHING of this machine? And while you'll never
  > say so much, shouldn't they have taken this BEFORE they sent this computer
  > to a customer?
  >
   
   

• When I try to log the p2p soulseek site, I get the error message "connection failed: socket error.» change the connection settings. How can I fix it?

  "socket error".

  When I try to log the p2p soulseek site, I get the error message "connection failed: socket error.» change the connection settings. How can I fix it? Is - this type of error called a winsock error?  It keeps happening to me on this site. What I've read, it happens when you make changes to a program before concluding that under its weight. Could it happen because I'm deleting files, I don't think that will be completed while the other files are D/Ling? That's what I'm doing wrong? I found a solution to correct an error in Winsock that is to enter the "command prompt" and type "netsh winsock. Will this work? (I'm sorry I have so many questions in this post, but I have had TO KNOW!!)

  Hello

  I suggest you send the question here for best support about the issue.

• error message trying to run a clean boot "an access error was returned while trying to change a service."

  While trying to solve a problem with IE 8, I have a problem trying to run a clean boot.  When I start up I get a message on change in the config file. Click ok and sys config is displayed. Now, if I make a modification, OR not, I get an error message - "an access error was returned while attempting to change a service. You may need to log on using an administrator account to make the specified changes. "First of all I am logged on as administrator, secondly I get this error even when I select"normal start ". I used the clean boot before without problem.  Any ideas?  I am running win xp sp3.  I started having problems after the sp3 upgrade.

  Given that you are not using the standalone SP3 Installer AND since McAfee was working at the time of installation, that's what I'd do (well, I would do it only if I was almost 100% convinced there was no malware on my system):

  1. download the McAfee removal tool.

  2. download the installation file for the free version of Avira AntiVir.

  3. download the standalone SP3 Installer.

  4. download the standalone installer of IE8.

  5. physically disconnect from the Internet.

  6 turn off the automatic updates (temporarily).

  7 uninstall McAfee.

  8 run the McAfee removal tool to make sure that all other loose ends are supported.

  9 Uninstall SP3.

  10. run the system restore, select the before date SP3 has been installed.

  11 uninstall IE8 (and IE7, if necessary). Reason: It is important to be at the level of IE6.

  12 install the SP3. Reset.

  13 Installing IE8. Restart twice.

  14 install AntiVir.

  15 re - connect to the Internet.

  16. download and install the update of AntiVir.

  17 go into Windows Update and install all post-SP3 SECURITY update (stay away from any optional object).

  18 re-rockers automatic updates.

  After the back if you need links to the downloadable.

• I get an Error Message When you try to send emails. "some errors occurred while processing the requested tasks. Please see the list of errors below for more details". __

  I get an Error Message When you try to send emails. "some errors occurred while processing the requested tasks. Please see the list of errors below for more details".

  But it sends the message anyway... multiple copies, and she also is put in the "Outbox" in Outlook Express as if it is not sent.

  To stop the email to be sent repeatedly to the recipient, I erase it from the "Outbox" but a) you don't know if they really got it) b it is embarrassing for the receiver c) is this a bug I can fix it?

  Thanks for any help.

  You have a corruption of dbx file easily corrected.

  Spend most of your messages out of the Inbox and then create new folders to send and sent items box after having moved the messages you want to save to a local folder that you create.

  Tools | Options | Maintenance | Store folder will reveal the location of your Outlook Express files. Note the location and navigate on it in Explorer Windows or, copy and paste in start | Run.

  In Windows XP, Win2K & Win2K3 the OE user files (DBX and WAB) are by default marked as hidden. To view these files in Windows Explorer, you must enable Show hidden files and folders under start | Control Panel | Folder Options icon | Opinion, or in Windows Explorer. Tools | Folder options | View.

  With OE closed, find the DBX files for the items in the Outbox and sent and delete them.  New ones will be created automatically when you open OE.

  After you're done, followed by compacting your folders manually while working * off * and do it often.

  Click Outlook Express at the top of the the folder tree so no folders are open. Then: File | Work offline (or double-click on work online in the status bar). File | Folder | Compact all folders. Don't touch anything until the compacting is completed.

  General precautions for Outlook Express:

  Do not archive mail in the receipt or sent items box. Create your own user-defined folders and move messages you want to put in them. Empty the deleted items folder daily. Although the dbx files have a theoretical capacity of 2 GB, I recommend all a 300 MB max for less risk of corruption.

  Information on the maximum size of the .dbx files that are used by Outlook Express:
  http://support.Microsoft.com/?kbid=903095

  Disable analysis in your e-mail anti-virus program. It is a redundant layer of protection that devours the CPUs, slows down sending and receiving and causes a multitude of problems such as time-outs, account setting changes and has even been responsible for the loss of messages. Your up-to-date A / V program will continue to protect you sufficiently. For more information, see:
  http://www.oehelp.com/OETips.aspx#3

  Why you don't need your anti-virus to scan your email
  http://thundercloud.NET/infoave/tutorials/email-scanning/index.htm

  Note that for some AV programs, it may be necessary to uninstall the program and reinstall in custom Mode and uncheck analysis when the option is the result of e-mail messages.

  Compact often as specified above.

  And backup often.

  Outlook Express Quick Backup (OEQB Freeware)
  http://www.oehelp.com/OEBackup/default.aspx

  Bruce Hagen
  MS - MVP October 1, 2004 ~ September 30, 2010
  Imperial Beach, CA

• I get the following error messages at startup: Windows Sidebar Settings.ini. is used by another system. Recorder warning: recorder! Initialize is not yet call... The log file can corruption exp. application failure did not start.

  Original title: opening of the pop ups

  I have Vista Home version.  When I connect, I get the pop - ups following:

  1.) _Windows sidebar Settings.ini. is used by another system.

  Recorder 2.) WARNING: Logger! Initialize is not yet call... The log file can corruption exp.

  3.) down the application did not start.

  Also: while I'm on the internet a pop - up occurs from time to time indicating: "Internet Explorer has stopped working".  Sometimes I get started, and sometimes I can just 'X' out and I'm always on.

  Hello

  1 how long have you been faced with this problem?
  2 did you recent hardware or software changes to your computer before this problem?

  I suggest you try the procedure below.

  Step 1: Try to perform the clean boot in order to solve startup error messages.

  From your computer by using a minimal set of drivers and startup programs so that you can determine if a background program is interfering with your game or program. This type of boot is known as a "clean boot".

  Follow the steps provide in the article below to perform the clean boot. http://support.Microsoft.com/kb/929135

  Step 2: I suggest you try the steps outlined in the article below to solve the problem of internet Explorer.
  http://support.Microsoft.com/kb/936213

  Thanks and greetings
  Umesh P - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]