Customer reviews second day in a row: and you should inform your contact at Echosign I couldn't fill it electronically via my iPhone in Safari or Chrome.  I got the signature part via mobile phone to work but the submit button would not FIR

Similar Questions

• ff22 has two high bars of the page, who act in the same way at the same time. In addition, the BACK button would not light on many web pages. This means that I cann

  Problem #1.

  First the top bar has a logo of firefox in the upper left corner and the words "Ask a Question/Mozilla Support-Mozilla Firefox" are on the right side of the logo. The first bar of the high a minimize, overlap and close the buttons at the top right. When I click on the logo, a short menu unfolds, has a choice as ' restore "..." "" loved ones ".

  The second bar from the top has the word "Firefox" in the upper left corner with an arrow down beside him. They resemble contrast white letters on an orange background of a huge button. When I click on it, displays a menu double glazing. He has a lot of choice as the new tab, new window private... Favorites, history, download... out. The second top bar has also minimize overlap and close the buttons at the top right, too. There are 7 Word securities "file, editing, display, history, bookmarks, tools and help" under this huge button orange at the top left. The logos and the address bar is less than 7 words.

  I don't have 2 best bars. They worry too much about property screen.

  Problem #2
  The BACK button isn't light upward, and may not work on many web pages.

  Thank you

  Looks like it is an application or a Firefox extension that causes this problem.

  You can start Firefox in safe mode to identify the problems: http://mzl.la/MwuO4X

  In addition, this article may be of interest to you: http://mzl.la/NjT73w

  --

  In addition, you can try to do a reset software Firefox, if you are not able to solve this problem: http://mzl.la/MnSTZB

• EMERGENCY SITUATION! Please help me! Why the OFF button would not start me in the hp recovery partition?

  I bought a hp Pavilion dm4-2015dx for a little more than a week or two to Bestbuy.ca.

  When I tried to launch the recovery by pressing F11at the start this morning, the following is the display.

  Windows could not start. A recent hardware or software change might be the cause...

  file:\Boot\BCD

  Statue: 0cx0000225

  Info: an error occurred trying to read the boot configuration

  Note: I recently made a partition, I divided the C drives in A and B, I wonder if that has an effect on my computer?

  Help, please! Only, I bought the laptop for a little more than a week

  Greetings,

  If you insert the first disc in your DVD-rom and you start your computer, the screen HP press ESC until you get a menu. Select the start menu and select CD/DVD-ROM, then enter. When it tells you to press a key to boot from the CD, press a key any. This will load the recovery software. Select immediate assistance and a recovery of the system. This will install your computer as the day where you bought everything first.

  WARNING * you will lose all files and programs that you have installed and placed on your computer that you bought the device.

  Yes, this will allow you to use the F11 key again once the recovery complete. Typical HP for the device warranty is one year. We can find this information for you. If you look at your serial number label, it should give you a serial number and the identification code of the product. With this information, you should be able to trace accurate information by the auditor of warranty status if your product has a #ABA or something similar, don't forget that.

  To find your sticker:

  http://h10025.www1.HP.com/ewfrf/wc/findModel?cc=us & DLC = in & LC =

  The guarantee verification link HP is:

  http://h10025.www1.HP.com/ewfrf/wc/weInput?cc=us & DLC = in & LC = on & os = 4062 & Product = 3204464 & softwareitem = MP-74848-1 & sw_lang =

• How to generate a call via mobile phone connected to the pc by usb

  Hello

  Comment on the call of the UN peut-on generate via mobile phone (nokia6680) connects to the pc by usb from labview?

  I have installed "nokia PC suite". is possible perhaps-this one starting from the palette "Connectivity/library and executable" start this app and automatically generate a call to a predefined number? It sounds complicated and ca me don't think so that it works...

  Apparently these are the commands that allow a cell phone from a PC of Girardon. Y ' there way to use a hyperterminal type program pay to try their hand and then be able to use the VISA features in labview? Pour the moment, I don't see how start. Ports of HyperTerminal manages the communication with RS232 type but comment Girardon the USB Installer takes it a soft pour mobile phone USB connection behaves as a virtual RS232 port?

  I have seen comment importer a dll in labwindows on another project but we must have the description of the dll, the functions name pay to use. In this case, I have all this.

  Thanks if qq can help me car the, I'm blocking (I saw that there were messages on this topic but ca don't allowed me to establish a communication with the phone outside the nokia PC suite software).

  My but is send an alert by such pour a data acquisition application that runs on a computer laptop not connect a network of the United Nations.

  JF

  

  Finally, it runs. When the telephone connection after installing nokia pc suite and a usb cable, the phone appears like adding a virtual COM and another element: "Nokia 6680 usb modem cable. Select the line corresponding to the additional virtual COM port, in my case, it appears as "COM17. Configuration is easy: choose transmission speed (bps 9800 or else up to 115200bps, apparently the phone can detect the selected speed of the rate), 8 data only bits, no parity, no flow control. Then you can send orders to:

  Xxxxxxxxx ATD. followed by the return to call a wagon phone (the phone number is xxxxxxxxx), at the end of the command is required to call (if there is a detected error 'NO CARRIER')

  to send an SMS, send:

  AT + CMFG = 1

  AT + CMGS = "xxxxxxxxx".

  then tape the message to send, followed by Ctrl-Z (ASCII code: 0x1A)

  If you are interested in this subject, I advice allows you to start the test with hyperterminal or another program to easily implement a serial communication, and then implement in Labview. I guess the AT commands are a little bit different with other phones like Nokia.

  Note: to send Ctrl-Z with Labview, right click on the array of strings in the scheme of hexadecimal code, then select Add 1A and re - click to print the normal code...

• Purchase order approval via mobile phone

  Hello
  
  Our EBS environment is with version 11.5.10.2 and database 11 GR 2.
  We have a requirement of configuration purchase order approval via Mobile phone / BlackBerry
  
  Could someone send a few docs related to this.
  
  Kind regards
  Mahesh

  Please see these docs/links.

  It is Possible to approve purchase orders, applications Via Blackberry, smartphone or PDA? [338874.1 ID]
  Not be able to approve purchase through Blackberry [ID 444122.1] orders
  BlackBerry displays emails with HTML tags in the body of the email [802225.1 ID]
  Troubleshooting incoming e-mail Notifications [ID 1184846.1]
  Email Notification approvals are rejected [ID 471423.1]
  Buttons missing approval Html, Foward, reject in [395986.1 ID] Email Notification

  With the help of mobile devices with Oracle E-Business Suite
  http://blogs.Oracle.com/stevenChan/entry/mobile_devices_ebs

  Hands on with iPhone Oracle Apps
  http://blogs.Oracle.com/stevenChan/entry/handson_with_oracles_iphone_apps

  Thank you
  Hussein

• plugged an external mouse and now the keys and mouse pad do not work. in the properties it shows activated but the Activate button is not active.

  plugged an external mouse and now the keys and mouse pad do not work. in the properties it shows activated but the Activate button is not active.

  You can start in safe mode and restore the system.

• Firefox automatically updated itself, would not add new bookmarks, then deleted all mine, will not always add new, now the back button does not work. I'm Livid.

  I think I'm on Firefox 13.0. He put itself as part of the update of my computer up to date (at least I guess that's what happened, because it has changed). I noticed yesterday that he would not favorite Web sites, but I thought it was just the website or bookmarks have been full-time or something. Today, I tried to remove a few bookmarks to make more, but they would not remove. I tried to register a new site, and it wouldn't work. I tried to close/exit firefox and re-opening of the program. While the program was closed, I installed the next set of updates on my computer. When I have opened firefox, all my favorites, and the tab menu (or what you call personal small bar on the actual tabs) were gone. I can't always favorite of new sites, so I can't even re-do all my favorites (and I got a lot, all of them arranged so it's a big loss and incredibly annoying). Then I realized that the back button does not work. And the cursor remains on the typing that I symbol, it does not change the arrow, when I click on a link.

  One possible cause is a problem with the places.sqlite file that stores the bookmarks and history.

  • http://KB.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox
  • https://support.Mozilla.org/KB/bookmarks+not+saved#w_fix-the-bookmarks-file

  You can also try to repair the database of places with this extension:

  • https://addons.Mozilla.org/firefox/addon/places-maintenance/

• Portege M750 and Win8.1 Pro - the tablet buttons do not work

  Hello

  I have problems to install the tablet buttons in WINDOWS Pro 8.1. Everything else works perfectly.

  In Windows 8 Pro this button worked fine, but now, after clean installation of Windows Pro 8.1 two buttons do not work. The buttons are the Toshiba help buttons and the presentation. I tried to set them up in Toshiba assist software but nothing happens.

  I don't know that I have installed all the drivers who wverything work with Windows 8. Someone at - he tried this and add success?

  > I don't know that I have installed all the drivers who wverything work with Windows 8

  Windows 8.1 isn't Windows 8 and many tools and drivers Toshiba win 8 don't work or are not fully compatible with Win 8.1

  As much as I know the Toshiba can't win on this Portege M750 8.1.
  This means that no Win 8.1 driver will come out and in this case, certain features of the laptop as the control buttons may not work properly.

  You are using Windows Vista or Win 7, these buttons were controlled by added value package. This package does not exist to win 8.1 and has been replaced by other software called system Toshiba driver

  So in case you want to try to get to the buttons, I recommend that you check this with Toshiba system driver

• Satellite U500 - the volume buttons do not work

  Hello

  I just bought a Toshiba Satellite U500 two days ago and already problems :(

  It has a control buttons sensitive contact, which includes the eco, the media buttons and the volume control utility (+ and -)
  The volume buttons do not work, and sometimes the computer crashes to their contact. Once I touch the-, he begins to turn volume down until it reaches zero, and even if I turn it up using windows, back to zero (as if the button is still depressed). The + does not work.

  Help, please. Is it possible to re-install the drivers?
  The only solution I found is to disable them using HWSetup...

  Great news. Thanks for the comments!

• the light on the power button does not work. How can I activate it?

  HP pavilion dv7

  Windows 7.

  the light on the power button does not work. How can I activate it?

  If the key light is not lighting up, then more than likely that the LED is just out for your power button. If the laptop is still under warranty, you can it be repaired or replaced, but as long as its not causing you any serious issues, I worry too much with it.
  
  BRAVO is just a system we use to say thank you to informative messages.

• The scan button does not work on Windows XP Media Center edition 2005

  Name of the printer: hp psc 1350 all-in-one

  Hi, this is happened since I reinstalled the operating system with an OEM disc, removing all the hp stuff. I got a new OEM drive that comes from hp (I think... well hp stuff works now) but the scan button does not always work. The old record was kind broken.

  I don't mind, but it will be useful, if it could be repaired. Don't want to do something big, would rather just not fix that to do something does not.

  Note: Scanning works, but I have to look somewhere else (e.g. opening scan in the Panel)

  OK, that explains why the scan button does not work.

  The complete software is required for the scan button to work, it is not a feature of the base software.

  Be sure to follow the steps below in order to get is torted:

  1. Unplug the USB from the printer.
  2. On the start menu, enter the HP folder. and follow the link to uninstall to remove the current software.
  3. If you don't find it there, go into control panel > add or remove programs, and remove any software installed HP PSC 1300 series.
  4. Download and install the full feature below:
     http://ftp.HP.com/pub/softlib/software10/COL8901/MP-23606-3/gc_w01_ENU_NB.exe
  5. You will find the Director of HP under the HP software. If you have problems using it, make sure you install the following hotfix:
     http://ftp.HP.com/pub/softlib/software8/COL17377/OJ-46104-1/CIT207355-HPCOM-patch-V8.exe

  Kind regards

  Shlomi

• My optical drive is not displayed in "Device Manager" the eject button does not work

  Latitude Dell with Windows 7

  My optical drive does not show in the "Device Manager", the eject button does not work - I can only eject through the pin hole.

  This means that the drivers are missing or that the disc is broken?

  I tried to restart.

  Thanks in advance

  Dave Roberts

  Original title: Reader in mind windows 7

  Its possible the drive has failed. Is this an internal or an external drive? In both cases, make sure that all cables are properly connected and functional, including the power cables. If its a USB external drive then try another USB port.

  But, assuming that you tried to update the drivers (get the latest compatible drivers on the manufacturers for your brand/model/OS(32/64 bit) PC support site and install to see if that helps - first set a system restore point)) and then see if this MS article helps - https://support.microsoft.com/en-us/mats/cd_dvd_drive_problems?wa=wsignin1.0

• I was offered an upgrade of windows 10 on my laptop that is running windows 7, but my wifi button was not working when I installed 10 windows so I started 7 what can I do?

  Hello

  I was offered an upgrade of windows 10 on my laptop that is running windows 7, but my wifi button was not working when I installed 10 windows so I started 7 what can I do? It is an Acer Aspire 5920 G (old enough)

  Thank you.

  There could be a problem with the wifi driver that comes with Windows 10. I think that you first need to find the right driver for Windows 10 on the Acer site. Otherwise, you may need to install a usb wireless card.

  Thanks for reading.

• I bought Photoshop element 14, but got the version of Windows, not Mac I wanted. Is it possible to change? I have not yet downloaded. And is it possible to contact Adobe to have an answer?

  I bought Photoshop element 14, but got the version of Windows, not Mac I wanted. Is it possible to change? I have not yet downloaded. And is it possible to contact Adobe to have an answer?

  You will need to contact support by calling/chat for this request.

  Contact the customer service

  * Be sure to stay connected with your Adobe ID before accessing the link above *.

• I have published my new folio to an existing application on the app store and made public, but is not in the app store? The notify button does not always take me back to the Organizer screen producer folio.

  I have published my new folio to an existing application on the app store and made public, but is not in the app store? The notify button does not always take me back to the Organizer screen producer folio.

  Hello

  first of all a new folio you post of DPS, the folio will not appear in the App Store, but in the library of the application.

  If this is not the case:

  1 make sure that you have published the folio under the same account that you used to create the Viewer.

  2 - Make sure that you have used a product ID unique for this folio

  3. If the Notify button does not work, note that this feature is available for viewers of enabled notification

  Check whether or not you have the Notification turned on in the dashboard section, otherwise it is likely that this account is not the Application role are entrusted to him... which brings back us to the point #1