customization of a gauge in a steering control control

Similar Questions

• X 7500: customization of mouse HP X 7500 (mouse control center)

  Hello

  I just bought the HP X 7500 Bluetooth Mouse.

  While the search for the best shape, I stumbled on the YouTube page of the HP which had an overview of the mouse X 7500 and said at the end of the video, for the other custimization, mouse HP control center can be downloaded from the HP Web site.

  It is close as well as in the choice of this mouse, because I need to customize the buttons of my mouse.

  To my surprise, the software is not available on the Web site, and after further research, I found a tutorial page saying that it must be installed on the CD that came with the mouse. Of course, there was no CD provided with the purchase (even if there was, I have no CD-ROM drive).

  This pretty much of making the mouse useless for me, and no google search returns all results for mouse control center.

  All other mouse I had previously came with its own software (other brands, it's my first HP) allowing the user to customize his buttons and resolution/sensitivity etc.

  Anyone know where I could get the software, or maybe someone has a CD laying around? The mouse seems to fit comfortably in my hand, and it would be shame to return simply because HP is once more rather incompetent at his service.

  Any help would be appreciated!

  Hello @Kastytis,

  Welcome to the Forums of HP Support!

  I stumbled upon your post on the issue of the mouse and wanted to help!

  The Control Center software is available for the mouse on the HP site, but not for Windows 10.  You can try to use the software for Windows 8.  You can find the mouse drivers here:

  Drivers - X 7500 HP Bluetooth wireless mouse

  Let me know how it goes.

  Please let me know if this information helps you solve the problem by marking this message as 'accept as Solution' , this will help others easily find the information they seek.  In addition, by clicking on the Thumbs up below is a great way to say thank you!

  Have a great day!

• When I go to the customization of windows vista, it says: "error control panel of customization."

  Original title: Control Panel customization

  When I go to the customization of windows vista, it says: "Error of control customization panel" and below, it is said: "there was a problem loading of a predefined color."

  Why do you think that what is happening? How can I solve this problem?

  Thanks :)

  E-mail address is removed from the privacy *.

  Hi DanteFicca,

  1. how you try to access the customization? This occurs when you try to access personalization Control Panel or office?

  2. did you of recent changes to the computer before this problem?

  You can try to run a SFC scan to find all of the corrupt files and try to install the SP2 and IE 8.

  You can read the following article to launch the SFC scan:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Hope this information is useful.

• Can I customize the notification blocked on MS parental controls page?

  Set the blocked notification page to display a design customized as a picture of the parents to remind children?

  No, it is not possible currently.

• Don't customize in my control panel

  I can't change my theme because I have customize in appearance and personalization in my control panel... in the office when I right click it is customize... when I click it, unknown error shows up... help! :'(

  Hello

  1. Since when are you facing this problem?
  2. Have you made changes on the computer before this problem?

  You can refer to the 'Unspecified error' error message when you click Customize on the shortcut menu on a computer that is running Windows 7 or Windows Server 2008 R2

  It will be useful.

• Keyboard customization - change the layout of the keyboard

  original title: customization of the keyboard

  Is there a way to change the layout of specific characters on my keyboard without changing the overall language version?

  Customization only options I see in the control panel appears to be non character keys only (like mail, home, etc.).

  Y at - it good software that you could recommend for this purpose?

  Hi Merryweather,

  The only real way to do that would be through specific software keyboard.

• Controls of Nav missing skin custom

  Has anyone seen a problem with the customization of skin there is no navigation control (left-right).  This is the box, even a basic test skin.  When I look at the code, I see the icon.gif in the skin itself.  It comes to RH8.

  Hello

  See if the link below will help answer the question.

  Click here to see

  See you soon... Rick

  Useful and practical links Wish to RoboHelp form/Bug report form Begin to learn RoboHelp HTML 7 or 8 times now - $24.95! Adobe Certified RoboHelp HTML Training SorcererStone blog RoboHelp EBooks

• Customize Disco Viewer for a more compact structure

  Hello
  
  The end user has a screen resolution of 1024 x 768. Using Finder it is much more visible information on the screen. In Discoverer Viewer, there are a lot of iem who care about the amount of space while the user must scroll down and down all the time.
  
  Is it possible customize Discoverer Viewer to hide the parameter controls, a list of spreadsheet, controls functioning and just keep the result grid? It would be also nice to descreese the size of the font of the grid. Change the values for the column Format, Data Format and Format of Total changed font size in the Discovrer Viewer.
  
  Kind regards
  Tamas

  >

  This is not possible, I do not think that if we can hide them

  Hello
  Sorry Ricardo but I disagree.
  It is possible to customize the layout of the Viewer.
  Those are UIX files that can be modified to hide parts of the screen or to change their behavior.
  But the first thing you should consider that it is not supported by oracle.

  You can start your search in blogspot
  Search for UIX changes that are being made here (there are good examples).
  It will give you an idea about what you can do.

  Tamir

• Why my Menu button does not provide an add-ons button?

  Some of your help pages have departure instructions, '1. Click the menu button and choose Add-ons. The tab of the Add-ons Manager will open. "My menu access such an option. There choices such as the new window, new private Page window, save, print, etc. There is also a 'Sign' button in Sync, a '+ customize', etc.

  Hi, please see - controls to customize Firefox, buttons, and toolbars.

  If the add-on button is not on the menu or other tools and features, click default settings.

  You will also find in the menu bar > tools > modules as mentioned by FredMcD.

  If your question is resolved by this or another answer, please take a minute to let us know. Thank you.

• iPhone 4 s problem audio on iOS 9.3.2 when powered

  Hello community support.

  Im having a strange problem on my 4S running iOS 9.3.2 when under tension. When it is connected to the power of Google Maps as Apple begins to repeat and maps don't stop repeating a steering control when the speaker. In fact, it looks exactly like broken record. Usually only so he can stop is to unplug it from the power source. Sometimes it will stop smoking app but not usually. It's very annoying if I need to be connected while driving somewhere and using an application of cards. Also does the same thing in spotlight search when you use the audio search. There hung noise doesn't either stop unless it is unplugged. IM using an approved charger car BTW Apple and only Apple Chargers original in my home, same problem. It is now the second replacement phone warranty from Apple, the last one I exchanged for having exactly the same problem (it's less than months). I'm starting to think it's a problem of software bug now and not material. He does the error in some applications and not others like the music or other. Its only in applications that need to start and stop sound automatically. I tried all the normal stuff, hard reboot and delete Google Maps app and fooled with it. Im going to try a full restore before joining Apple store. If anyone has had the same issue and has a fix for this problem that would be greatly appreciated. I really want to have to waste time in Apple store just for them to give me another phone that will probably be the same question. I even went so far as to the update the phone to Beta software version 9.3.3 iOS but problem always manifested.

  Hello mojo design,.

  Thank you for being part of the community of Apple!

  It is my understanding that you are experiencing audio that repeats itself when using some applications.  That would certainly make using these applications an unpleasant experience.

  You need to isolate the problem in either a hardware problem or a software problem.  To do this, you'll want to restore as new iPhone when you go and restore your phone.  Since this will delete everything on the iPhone, remember to first create a backup. Backup instructions can be found here:

  How do I Save your devices using iCloud or iTunes.

  Once you have a backup, restore as new iPhone, follow these steps:

  How to clear your iOS device and then set up as a new device or restore from backups.

  Don't forget to set up your device as a new device rather than restore the device from backup.  Once restored as new iPhone, adding all the other Apps, test the iPhone and see if the problem persists. If the audio is always repeat, this indicates a hardware problem and the best option would be to have the iPhone to be checked by a service provider authorized or at an Apple Retail Store.  You can find the closest looking here:

  Find locations.

  If the problem is more current, then go ahead and restore the backup using the same instructions:

  How to clear your iOS device and then set up as a new device or restore backups.

  This time, don't forget to use the restore of your device instructions.

  If the problem happens again, this seems to indicate that there is something load from the backup that is causing the problem.  If this happens, you will need to configure like new again and then install the applications you need on the phone, the test after each installation until you determine what App is causing the problem.

  See you soon!

• Failed to start after the active partition changed by mistake

  By mistake partition active of my hp laptop pavilion has been changed to recovery disc (D) and WINDOWS DOES NOT START. I can access prompt f11 (hp system recovery) when starting. How to change the partition active (command prompt in recovery when you start using f11 Manager) command there? Help, please

  Hello DipayanSaha ;

  Let me welcome you on the HP forums!

  I read your message on the orders you want to change the volume Actiive and wanted to help.
  
  The basic command is diskpart - and you run from an elevated command prompt window.  You should know that, since it is a steering control system, it will do exactly what you tell him to do it-no questions asked.  So, if you say to format the wrong volume, there is no going back from that.

  Once you enter diskpart in the command window, wait until you see DISKPART > appear on the command line.  This indicates that you are now inside the diskpart command environment.

  Type help to see a list of commands and options.

  Enter the volume in the list to get a list of partitions.  Note that they are numbered from ZERO, not one.  Take note of the two volumes that you want to change the attributes. Make sure you write down the correct volume numbers.

  For the sake of discussion, let's assume the volume numbers are 1 and 2, 1 being the volume of the BONE and 2 being the recovery volume - volume numbers may be different.

  To remove the active indicator of the volume of recovery, follow these steps:

  Select volume 2

  inactive

  To now add the active indicator for the OS volume, follow these steps:

  Select volume 1

  assets

  Active flags have now been reset correctly, and you're done, so type exit

  The command window will display Exit DiskPart...

  That's it - good luck

  I'm a volunteer and I do not work for, or represent, HP.
  ========================================================================
  If you feel that my suggestions helped you, please click on the thumbs-up symbol to say thank you!
  
  If they helped to solve your problem, please click 'Accept as Solution' to help others find similar information.

• Satellite P100: Multimedia Bar with Winamp and not WMP

  Hello
  I would like to customize my Toshiba P100 multimedia bar to control Winamp instead of Windows Media Player. Somehow, the 'stop' and 'Skip fwd/bwd' buttons appear to have begun to control Winamp (although I have no idea how), but the "play/pause" button always opens the WMP, which I don't use and find it generally boring.

  Is there a way to program these buttons?
  Perhaps via the registry?

  Thank you, d.

  Hello

  It s very strange that the other keys work with Winamp.
  Generally AFAIK it of not possible to use this button with a 3rd party program.
  This button should only works with Windows media player if the CD has been inserted or WinDVD if the DVD has been inserted.

  However, in my opinion, you should check if the new version of the Toshiba controls is displayed on the page of the Toshiba driver. Try reinstalling this application.

  PS: What happens if you remove the Winamp? The buttons work properly?

• Module adaptation NOR - 6581 FlexRIO - Can one single port of IO have a few lines of channel defined as inputs and some defined as outputs?

  Hello

  I use a 6581 with 7965R FlexRIO FPGA module adaptation module. E/s/Port CLIP Module allows to configure a port as an input or output, but I would first of all a line of a port as an exit channel and the remaining lines of seven channels as inputs, it is possible to do?

  Thank you

  Maurice.

  Hello Maurice.

  The 6581 adaptation module can only change direction based on port (not on a basis of individual line).  This can be seen in the specs here.  There are other modules of digital adapter that support by the steering control of channels such as the NOR 6583.  The NI 6583 35 single ended e/s and the input/output LVDS (or mLVDS).

  Kind regards

• Graph legend silver color problem (Bug?)

  Must be the end of the week...

  I can't seem to find a way back to the original color of the chart legend money once I have it painted a different color (Figure 2 below, painted 'System'):

  

  I used the for the main body color picker and the original legend of the chart (they are the same, apparently), but when I use this color choice, no question when I apply it (corner, Center, etc.), I get the weird result shown in Figure 3). What gives?

  I have no problem with modern graphics:

  

  I enclose the offending VI and the non-offending someone confirm (or not).

  I'm sure there is a way, it seems just too stupid to understand.

  I would say that you do not teach an old horse like me to paint a chart legend differently that it has been used forever...

  This is of course all the stuff of LV 2011.

  I agree it's a bug and it will drop as such, but I also want to explain what is happening.

  Money controls have the background of the text transparent plot value so that you can see the gradient of silver decoration behind it.

  When you colour legend, it changes the colors of foreground and background on the text of the plot, as well as on the framework. How works the silver decoration, these two colours are the endpoints of the gradient, you receive the darker color as the background of the plot.

  I have this set probably by having the paint bucket tool let the background as transparent.

  To establish a chart with this problem, you can use the control editor. By choosing 'Customize' mode, you can select the text of the plot and choose Edition > control to customize to open in another editor to control where you can color.

• Information about the properties of data acquisition

  Hello

  I'm William, a student from Belgium (technical measure and control). For my thesis in June, I need to make a comparison between the USB 6008/6008 and myDAQ device. I must do this based on the specifications of the devices. Specifications of several I found in the manuals are very interesting, but I don't know what they mean. Can someone explain it to me as 'temporal resolution', the 'input and output resolution' and the 'steering control. Are there simple experiments with Labview to show the difference of several between two DAQ devices?

  with friendships.

  William

  Hello William,.

  I don't directly know specific tests about the comparison of the time resolution for these cards.

  Of course, you are always free to do these tests yourself and share them with us.