Failed to start after the active partition changed by mistake

Similar Questions

• Windows does not start after the MAC partition resize

  Hi all

  I am newbie in MAC OS.

  I have 2 bootable partitions on my MBP: MAC 10.11.4 Capitan and WINDOWS 10.

  What I have is:

  1. install MAC OS in the DSS of any origin.

  2. use bootcamp, divide the similar size for WINDOWS 10.

  3. install the new fresh WINDOWS 10 correctly and updated. Yet to backup. None of the additional applications. WINDOWS is default OS.

  4. so far, I need MAC OS or WINDOWS OS correctly. Yet to backup.

  5. I need to resize smaller MAC OS, divide into partitions of DATA for data could leave the two BONES.

  6. Since then, I can't start Windows. Doesn't appear that "no device bootable bra bra bra...»

  7 but if I click on Option after turning on, I still see MAC OS option.

  Could help me fix bootcamp, so I can have the WINDOWS startup and the DATA partition?

  Thanks a lot before.

  diskutil list

  Cs diskutil list

  sudo TPG - vv - r see the/dev/disk0

  sudo fdisk/dev/disk0

  The result of the Terminal:

  GEORGEs-MacBook-Pro: ~ the georgeaprianto list $ diskutil

  / dev/disk0 (internal, physical):

  #: NAME SIZE TYPE IDENTIFIER

  0: GUID_partition_scheme * TB 2.0 disk0

  1: disk0s1 EFI EFI 209.7 MB

  2: Apple_CoreStorage MAC 502.4 GB disk0s2

  3: disk0s3 Apple_Boot Recovery 650.0 MB HD

  4: Microsoft database DATA 497.0 GB disk0s4

  5: Microsoft WINDOWS 1000.0 GB disk0s5 data base

  / dev/disk1 (internal, virtual):

  #: NAME SIZE TYPE IDENTIFIER

  0: Apple_HFS MAC + 502,0 disk1 GB

  Logical volume on disk0s2

  8256E61A-9B5E-436A-8A15-97A98A55E0E3

  Unencrypted

  GEORGEs-MacBook-Pro: ~ list of cs georgeaprianto$ diskutil

  CoreStorage groups of logical volumes (1 found)

  |

  + Logical Volume - Group 7C0ED763-7739-42D4-85DB-E84BD98FA978

  =========================================================

  Name: MAC

  Status: online

  Dimensions: 502414561280 B (502,4 GB)

  Free space: 18907136 B (18.9 MB)

  |

  +-Physical volume EEF7EECD-2732-4794-8ACC-B1FDBE3FFFAE

  |   ----------------------------------------------------

  |   Index: 0

  |   Disc: disk0s2

  |   Status: online

  |   Dimensions: 502414561280 B (502,4 GB)

  |

  +--> Logical volume family 821E2FC7-4169-4452-BC6D-7469364950F4

  ----------------------------------------------------------

  Encryption type: no

  |

  +--> Logical volume 8256E61A-9B5E-436A-8A15-97A98A55E0E3

  ---------------------------------------------------

  Disc: disk1

  Status: online

  Size (Total): 502043332608 B (502,0 GB)

  Reversible: Yes (no required decryption)

  Name: MAC

  Volume name: MAC

  Content indicator: Apple_HFS

  GEORGEs-MacBook-Pro: ~ georgeaprianto$ sudo TPG - vv - r show/dev/disk0

  Password:

  See the TPG: / dev/disk0: mediasize = 2000398934016; SectorSize = 512; blocks = 3907029168

  See the TPG: / dev/disk0: MBR suspicious to sector 0

  See the TPG: / dev/disk0: Pri GPT to sector 1

  See the TPG: / dev/disk0: GPT Sec at sector 3907029167

  start index size summary

  0           1         MBR

  1 1 Pri GPT header

  2 32 table GPT Pri

  34 6

  40 409600 1 part TPG - C12A7328-F81F-11D2-BA4B-00A0C93EC93B

  409640 981278440 2 part TPG - 53746F72-6167-11AA-AA11-00306543ECAC

  981688080 1269536 3 part TPG - 426F6F74-0000-11AA-AA11-00306543ECAC

  982957616 970684880 4 part TPG - EBD0A0A2-B9E5-4433-87C0-68B6B72699C7

  1953642496 262144

  1953904640 1953124352 5 part TPG - EBD0A0A2-B9E5-4433-87C0-68B6B72699C7

  3907028992 143

  3907029135 32 table dry GPT

  3907029167 1 dry GPT header

  GEORGEs-MacBook-Pro: ~ georgeaprianto$ sudo fdisk/dev/disk0

  Disk: geometry / dev/disk0: 243201/255/63 [3907029168 sectors]

  Signature: 0xAA55

  From end

  #: cyl hd s - cyl hd s id [Start - size]

  ------------------------------------------------------------------------

  1: EA 1023 254 63 - 1023 254 63 [1-409639] < unknown ID >

  2: AC 1023 254 63 - 1023 254 63 [409640-981278440] < unknown ID >

  3: AB 1023 254 63 - 1023 254 63 Boot Darwin [981688080-1269536]

  4: 0 b 1023 254 63-1023 254 63 [982957616-970684880] Win95 FAT-32

  GEORGEs-MacBook-Pro: ~ georgeaprianto$

• Windows 2003 fails to start after the conversion from a virtual hard disk with vSphere Standalone Converter 4.0.1

  Hello

  I've recently updated my host to vSphere 4. I've also upgraded to vSphere Converter 4.0.1. However, when I convert a Microsoft Windows 2003 virtual hard drive in vSphere, the resulting virtual machine does not start. He gets just after the BIOS screen, then turns black with only a white line in the upper left corner of the console.

  I tried the hot and cold conversions. I tried changing the different settings of default conversion. I tried to remove the source machine and recreate.

  It worked well under ESX3.5, so I wonder what I'm doing wrong on vSphere.

  Any help appreciated.

  Thank you.

  In v4 disk are in SCSI format only.

  Probably also the source was in the SCSI format... so v7 to the IDE format give you not configured in the bootloader of the disks.

  André

• Equium L350 - Vista fails to start after the installation of recovery

  Hello world

  I have an Equium L350 after an accident I couldn't restart my pc. I tried to solve by using the recovery f8 menu and it did not work so I contacted Toshiba and got a restore disc. I reinstalled from the disc, after the instalation it said complete installation but visa does not start.
  I get: Windows cannot repair this computer automatically click finished to turn off your pc

  After a format and reinstall my computer broken? He is 13 months here for out of warranty

  Hello

  Normally after the installation of recovery your laptop should work fine again.

  In my opinion, it could be a malfunction of the equipment. Did you test the HARD drive for bad sectors? You can do this with Drive Fitness Test: http://www.hitachigst.com/hdd/support/download.htm#DFT
  Download the ISO image and burn it to a disk. Then you can boot from it and test your HARD drive for errors.

  I also recommend to check the RAM for errors: http://memtest86.com/
  Memtest is a good diagnostic tool for the RAM.

  I hope I could help a bit. :)

• BlackBerry JDE fails to start after the installation of Simulator Tour 9630

  I use JDE 4.7.0 on Win XP + a bunch of simulators.

  After the Tour 9630 Simulator (v 4.7.1.40), I installed the JDE does not start.

  I tried to run ide.bat via command line - it does not give error messages.

  I tried to reinstall my JDE (with deletion of the dir of installation in order to remove settings from JDE is) - it did not help.

  I am now able to run the JDE again after that I uninstalled the Tour 9630 Simulator. But I really need this Simulator because I develop an application for the round.

  What could be the problem?

  Thanks to Marc post here the solution I managed to solve this problem.

  The solution is:

  1. install the Simulator
  2. Make a copy of its installation directory
  3. uninstall the Simulator
  4. manually create a new Simulator in JDE by using the copy of the directory

• Windows Vista 32-bit is failing to start after the success of the recovery.

  Hi all, my apologies if this has already been covered in another post, I checked but I'm new here so might have forgotten.

  I have a HP Pavilion a6442a with Windows Vista 32-bit. A couple of weeks it froze, forcing me to maually shut down, and now it does not restart. It gets so far then goes to startup repair, which never seems to find no problem. I tried restoring the system (to several different restore points), conducted diagnostic tests, conducted tests of memory and hd and tried commissioning in all modes as I could: no problem can't find anywhere and I always had the same problem. Finally, I backed up my files and made a full recovery of the system. It said it completed successfully, I restarted to complete the installation of Windows, it gets "Please wait a moment while Windows starts for the first time... "freezes, restarts and then traced directly back to the start screen for repair.

  I am at a loss, I've done everything I can think. Does anyone have any suggestions?

  Hello:

  Have you added any hardware configuration inventory (other than replace the hard disk or add memory)?

  Do you have only the mouse, keyboard and screen plugged in when you ran the recovery procedure?

  If the answer to question 1, remove any material that you have installed that do not come with the PC and try to recover again.

  If the PC is recovering successfully, close and reinstall your spare hardware.

  If not, question 2, unplug anything other than the mouse, the keyboard and the monitor and try to recover again.

  If you continue to be confused and you can read all 25 characters of the product key of Vista on your PC case, you can make your own Vista installation media.

  It will be just a simple installation of Vista and no software other than the operating system will be included.

  You can install the drivers and software available to support for your PC and driver page.

  Link to the info below... click on the blue link of the reinstallation of Windows Guide PDF and start reading the news of Vista that starts on page 296.

  http://philipyip.WordPress.com/Dell-community-forums/

• Failed to start after the duplicate database dbconsole

  Hello
  
  The last time I tried to replicate a database on oracle database 11 g 2. Data source a sid is vvcoredb and database target a sid is orcl. I duplicated from VVCOREDB to well ORCL. I can access and query the database on ORCL. But I can't access dbconsole. I don't know why. I missed a few things?
  
  P/s: I database starting with the default command is: sql > startup.
  
  Anyone have any suggestions for me?
  
  Thanks in advance!

  See the emca command-line reference
  http://docs.Oracle.com/CD/E11882_01/server.112/e25494/dbcontrol002.htm#ADMIN13410

  EMCA - deconfig dbcontrol db | all - rest drop
  EMCA - config dbcontrol db | rest all - create

  Hemant K Collette

• Satellite C850 - 19(d) does not start after the UEFI to change CSM

  After wrongly BIOS change between UEFI for CMS, saving changes and leave, after execution of reeboot crazy screen and won't let me access the BIOS or Windows.

  SUGESTIONS?

  Thank you by the way

  What do you mean by "the screen turns crazy?"
  Start your machine and press F12 to get into the boot menu. You can access the menu?
  If so, there is also possibility to enter the BIOS settings. Try please o enter the BIOS settings on this path and set it to default settings again.

• New HP HARD drive &gt; load recovery disks &gt; fails to start after the installation process on the press continue

  I have Pavilion d7-4165dx laptop. I saw US, that made a purchase of the United States (BestBuy).

  -HARD drive failed after renewal of antivirus software trial period.

  -All diagnoses would not recognize the HARD drive.

  -Support HP said still in warranty, but I am out of country.  HP said more was likely HARD drive cable.

  -Buy cables and a hand off USA door.

  -Installed, always the same answer.

  -Ordered the new HP's HARD drive.  Out of stock.  Finally inquiring was commissioned to a part 3rd US rep.  He recommended to buy directly from output, but higher speed.  Did this and then HP replacement HARD drive arrives.  Both outside the U.S. door hand.

  -Install the fastest (slightly smaller) Seagate 500G 7200.  Has started the recovery with discs of recovery (5 in total who received from BestBuy, but not the OEM to the research), but before the new HARD drive is smaller than the original WD 640 G 5400.   Put WD #1 Bay and Seagate in #2.

  -Start the process of disk recovery.  Any resumption of the process of the plant and on the last drive-through, it says do not touch while the PC starts on and outside, etc.  Said so press on continue continue.

  -When the press continue, simply goes to the black screen with "No boot device...". »

  -Run the other options, the same message.

  -Diagnosis of ran.  Drive HARD everything is OK.

  -Called HP support.  It says I have to buy the HP recovery discs.  Those I have (5) is not the right one, there should be only 3!  They are that I got from BestBuy, but look like they were made here when BestBuy configures the PC.

  Suggestions anyone?

  Someone has found the problem for me today...

  "Put WD #1 Bay and Seagate in #2.

  When the directions say eliminates any external devices... it really means remove all devices that can be removed that were added after you bought the computer... including in-house!

• ESX fails to start after the installation with cpu5:1041) Mod: 1413: failed to initialize of vmfs2-1

  Hello

  I just installed a new ESX Server last night, configured and moved 6 VMs to him. I rebooted the machine, because I changed the VMconsole memory up to 500 and machine does not boot properly.

  The server is a Dell PowerEdge 6650 with 8 GB of RAM and 4 CPUs with a PERC3 RAID controller and 4 hard drives.

  VMware ESX 3.5 Update 3 build 123630

  Error 0:00:01:08.959 cpu5:1041) Mod: 1413: failed to initialize of vmfs2 with-1.

  Anyone had this problem with an ESX installation before?

  Kind regards

  Dean Forester

  Hello

  There may be a problem with the networking, can you start the server in debug mode and see if you can see an IP address for your service console. If you can see the ip address, you have a network card, you place your order to change, try to use the right physical NIC card mapped to the vSwtich0 who was there at the beginning when the machine was working.

  Thank you

  Samir

  PS: If you think the answer is useful please consider rewarding points.

• Failed to start after the upgrade of Oracle 10.2.0.4 EM 10.2.0.1

  Hi all:
  
  On a mouth there, we went to 10.2.0.4 for Oracle DB. When I started EM, he showed from. But I can't open 'EM from the browser.
  
  I started the EM of the console, and instructions are given below:
  
  [oracle@myhost ~] $ emctl start dbconsole
  TZ set to ROCK
  Oracle Enterprise Manager 10g Database Control Release 10.2.0.4.0
  Copyright (c) 1996, 2007 Oracle Corporation. All rights reserved.
  https:// < myhost.domain >: 1158, em, console, aboutApplication
  Oracle Enterprise Manager 10 g Database Control from... began. < = seemed began.
  ------------------------------------------------------------------
  Logs are generated in the directory /u01/app/oracle/product/10.2.0/db_1/ < myhost.domain > _ < myhost >/sysman/log
  [oracle@myhost ~] $ emctl status dbconsole < = I checked em State immediately.
  TZ set to ROCK
  Oracle Enterprise Manager 10g Database Control Release 10.2.0.4.0
  Copyright (c) 1996, 2007 Oracle Corporation. All rights reserved.
  https:// < myhost.domain >: 1158, em, console, aboutApplication
  Demon of the MA does not run. < = he did not run.
  ------------------------------------------------------------------
  Logs are generated in the directory /u01/app/oracle/product/10.2.0/db_1/ < myhost.domain > _ < myhost >/sysman/log
  [oracle@myhost ~] $
  
  Our playform of the OS is Linux AS4.
  
  Could someone give me some advice? Thanks in advance.

  When you actually perform the upgrade? And what time zone do you use?

  More precisely, you are in a time zone that has changed over the last 4 years? For example, most of the North America ended up with a time change advanced new savings in a few years and makes the Enterprise Manager very angry.

  One suggestion I have is to delete and re-create the MA. The following commands will do the job after asking the huge pile of questions

  EMCA - deconfig dbcontrol db-rest drop
  EMCA - config dbcontrol db-rest create

  http://download.Oracle.com/docs/CD/B19306_01/EM.102/b40002/structure.htm#sthref73 describes the commands.

  Since you have the patch, you obviously have access to Oracle Support. I suggest you also, you open a SR.

• Failed to start after the addition of RAM Vista 32 bit

  Using a HP Pavilion Slimline with Home Premium 32 bit.  I pulled 2 512 sticks and replace them with 2 1 gig sticks. On the first attempt to start, Windows goes through the user login screen, then restarts.  After that first start failure, it is never as much as the windows progress bar.  I reinstalled the sticks, verified that they are compatible, checked for updates to windows and HP and got nowhere I put 512 s back in and that's fine.  Reinsert 1 concerts, and it is the same everywhere.  I am of ideas on that.  Any thoughts?

  Hello bobobobby, I did a little research on the site of memory PNY and ran the memory Configurator.

  I did find your model on the list of the configurator. I found a 3020AN model, but is not your system,

  This seems to be a Compaq system. I then checked that your system model number on the HP website and it's a valid model number.

  Then, I went to Kingston memory and found your model in the Kingston Configurtor number. It shows a model of memory KTH-XW4300 / 1 G. You will notice the "H" in the model number, which means that it's specific HP.

  I then did a serach on memory Crucial website and made a memory Configurator, and it also sets out your model. It shows their model of memory CT693187.

  As PNY's Configurator is not your system model, this suggests to me that they do not have the memory of your system. It now seems that this memory is not compatible with your system, even if the specifications are PC530 DDR2 at 533 mhz, timings maybe not as your system will accept it.

  Just some thoughts.

• Failed to start after the windows logo screen, please help.

  Original title: STARTUP DO NOT FULLY

  Hi, I run windows XP Home Edition on my laptop, when I switch it on it boots until the windows logo and no more, can anyone help please.

  I tried F11 to safemode etc but is still no more than the windows logo.

  You must be repeatedly tapping / pressing the F8 key before Windows starts to load to access the Advanced Boot Options menu to see the Safe Mode options :)  Keep and tapped F8 until you see the Advanced Boot Options menu.

  If you miss the niche F8 and XP starts to load, you missed it, and you have to start over.

• HP mini 110-3500 laptop: computer laptop HP mini 110-3500 fails to start after the SSD upgrade

  Hello
  I recently bought a ' crucial 250 gb 2.5 "SSD and 2 GB of RAM (also by crucial), to upgrade my laptop HP mini 110-3500, who has been extremely slow. But unfortunately, the laptop refused to start when turned on. What can I do? I am very worried.
  Enkay1

  You answered. That's what I thought. You have DDR3L-1600 low voltage 1.35 volts. Low voltage will operate at a higher voltage (1.5 volts), but it is not the ideal memory for older hardware. Need memory DDR3-1333 name specified for the HP laptop. You can confirm or refute my diagnosis by putting in the memory of the old and see if it boots.

  It's the part number you need:

  621567 001

  http://www.eBay.com/ITM/2GB-compat-to-621567-001-A3803335-A4100445-A4427375-/230655741975?PT=LH_DefaultDomain_0&hash=item35b4275017

  

  Is your memory has 8 black on the side blocks or just 4? You want 8. Also if you have Windows 7 Starter, you can not use 2 GB of RAM.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• Failed to start after the upgrade of CPU.

  Original title: upgrade CPU

  I have a gateway GT5238e Media Center now under W7 32-bit which has an Intel Core 2 Duo E6300 @1.86 Ghz cpu in the socket LGA775, 5.5 GB of RAM. Wanting to upgrade processor, I have an Intel Core 2 Duo E8400 @3.0 Ghz cpu. It uses the same socket. Correctly put in the Earth and using the correct alignment of new cpu, I installed it. Mounted heat sink. When I start the system, the fans the whirlpool correctly, but system does not (Windows 7 Ultimate 32 bit). Why? Motherboard? Intel G965 Express Chipset?

  It should be directly interchangeable without any problem. Any help appreciated.

  (Moved to programs)

  In fact, the processor was incompatible with the Intel Chipset. Problem solved. Thank you for your efforts.