Ethernet does nothing. Does not work.

Similar Questions

• USB ethernet does not work after update to Mac OS sierra

  Hello

  I use end of 2014 Macbook pro 15 "running Mac OS Sierra.

  Before the update for sierra, Captain, EL on OS USB ethernet has been working well, but after that the update for Sierra USB ethernet does not work, "showing the cable disconnected.

  Please advise and thanks in advance.

  Do you use the Thunderbolt Apple > Ethernet card?

  -Try to reset memory NVRAM/PRAM and SMC

  MacIntel: Reset of the controller (SMC) system management

  https://support.Apple.com/en-us/HT201295

  Subject of memory NVRAM and PRAM

  https://support.Apple.com/en-us/HT204063

  -Try to start safe mode

  OS x: what is Safe Boot, Safe Mode?

  https://support.Apple.com/en-us/HT201262

  -Start to recovery and repair the startup disk

  OS X: on OS X Recovery - Apple Support

  https://support.Apple.com/en-us/HT201314

  The adapter works in recovery mode?

  This is the Office Mac Pro forum. I asked that your post moved to the forum of laptop MacBook Pro or another appropriate forum.

• Z460, Ethernet does not work after wakes up after hibernation

  Hi, I used Ideapad Z460 for nearly 3 months. I have this problem. Ethernet does not work after wakes up to the top of hibernation. I have already updated the bios to the lates version (release date: 14/02/2011) but still this problem. Someone has an idea?

  Thanks for reading!

  try reinstalling power management, the default settings of the bios and also try this:

  Right click on my computer > manage > device management > network cards > select ethernet adapter > properties > under power management tab, clear the check box to be able to save "allow the computer to turn off this device to save power".

  Restart your computer and check if it works.

• Driver Realtek 8103e does not work under Vista (DV4T), ethernet does not work

  I got a new motherboard under the vices, but now the ethernet does not (rj45).  I tried several drivers of other work say but it isn't on mine.

  Included are version 8/20, 9/21 and 1/24 (dates or latest codes) everything has been loaded at the front desk.

  I have the icon and when the cable is unplugged shows red X, which disappears when reconnected.

  Anyone have an idea when else I can do?

  I can't understand how a company like HP sends a non-working back unit after repair.

  If you had any driver installed for Ethernet before installing what I gave you...

  Then uninstall them all and also this driver which I gave you.

  Restart the system and reinstall this driver from me.

• HP compaq 6530 b ethernet does not work

  I have a laptop hp compaq 6530 b. A few days ago, I installed it for the first time Windows, in particular Windows7 Ultimate 64 bit (I used Ubuntu). Since the ethernet connection installation does not work (so that wireless gives no problem) although I installed all drivers HP hp websites...

  Can someone help me?

  Thank you

  Ciao,.

  You can go back and enable this setting. I assumed that you had installed the drivers.

  LAN save mode power turns off your wired ethernet card to save battery when it is not connected to an ethernet cable.

  People get alarmed when they don't see the wired ethernet controller, which is listed in Device Manager when there is no cable connected, and they think their wired network adapter is defective.

  When you disable the LAN power save setting, always wired ethernet controller is on and remains visible in the Device Manager if a cable is connected.

  Now in regards to the pilot, you must...

  It can be found on the link below.  Select windows 7 x 64 driver file.

  http://www.Broadcom.com/support/ethernet_nic/netxtreme_server.php

  Paul

• My ethernet does not work. Is this due to a recent security update?

  I've seen complaints (reddit, macrumor.com...) that recent security

  Update "031-51913 Kernel Extension incompatible data setting 3.28.1"

  has 'broken' my on my iMac ethernet connection 2015 later. I decided to buy this machine

  later the 2/26 because my iMac model equipped with mid-2009 seems to be dying, he

  lost its ethernet connection in the afternoon. OFF to Best Buy. The new machine put in place very well, but on 2/27,

  It was suddenly unable to ethernet. Maybe bad software system killed them both! Comments, advice?

  If you read this post, you will see there is a fix you can download.

  Re: Ethernet not working only not with El Capitan

• WiFi works but Ethernet does not work

  I just changed the ISP. I use the modem cable of the MRC, which is the same as one that uses Xfinity. I'm also using a Linkysys EA4500 router. I have not had any problems with setting up yesterday before they changed over this morning.

  I have two iMacs (my wife and I). If the modem cable is directly connect to one of the two iMacs, the internet works fine. However, when the Linksys router is part of the configuration, the iMac to my wife can connect via the Ethernet port but my iMac won't. My iMac can connect via WiFi. However, he won't be able to connect if I use an Ethernet cable.

  I have already reset the router to factory setting and restart the iMac and clear the PRAM, switched Ethernet cables. What happens here?

  The problem you describe will occur when changing the device connected to a modem cable without having to reboot the cable modem. Cable modems that are not as routers will communicate with a single device and refuse to connect to what anyone else, until you cycle power.

  Turn off your modem cable NCR and leave that it turned off. For reasons I don't understand (and will may not be not necessary), some cable ISPS also recommends disconnect physically their coaxial cable modem to perform a reset "full." During this time you can turn off the Linksys router also. Connect the iMacs to the router, either its LAN ports, via an Ethernet switch directly. It is not necessary to turn off Macs.

  Wait a few seconds, then reconnect the cable to the modem if you disconnected and turn on both the modem and the router. It should work.

• Ethernet does not work even if it is plugged.

  My laptop recently stopped to connect to the Ethernet connection, even if the cable is connected and working (I know it works because my Xbox One is on the same network, and it works very well.) It only shows that the computer is not connected to the internet, and the problem of troubleshooting help not at all. The wifi still works completely fine. Y at - it an easy way to solve this problem, or is it a hardware malfunction? Thank you!

  Hello

  1 did you do changes on the computer before the show?

  I suggest that you try the procedure described in the article below.

  Method 1:

  Why can't I connect to the Internet?

  http://Windows.Microsoft.com/en-us/Windows/cant-connect-Internet#1TC=Windows-7

  Method 2:

  Wireless and wired network problems

  http://Windows.Microsoft.com/en-CA/Windows/network-connection-problem-help#network-problems=Windows-7&V1H=win81tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  I hope this helps to solve the problem. Please come back for any clarification on this or any issue of Windows. We will be happy to help you.

• Laptop Compaq CQ58: LAN Ethernet does not work after the upgrade to windows 8.1

  After the upgrade of Windows 8 to 8.1, my Ethernet LAN is no longer in effect. Wireless LAN connectivity is OK. I run the HP Support Assistant and downloaded the drivers for 8.1. Hovever, I don't see a listed 8.1 for the LAN Ethernet driver.

  It seems that you encounter the same problem, I did when I ran the free preview of the W10. I had this error on the card reader.  I have no idea how to solve this problem.

  Is there is no ethernet controller needing drivers in Device Manager, then it is probably the realtek lan adapter that has the number 12 of the code, or it is part of the motherboard that controls the ethernet adapter.

  If you need Atheros bluetooth driver, then this is probably the one you need.

  http://h20565.www2.HP.com/hpsc/SWD/public/detail?swItemId=ob_127984_1

  Unfortunately, I won't be able to help you with question 12 code or ethernet.

  IMO, they are insoluble.

• Upgraded to Windows 7 and then downgraded back to Vista - ethernet not working, pilots it but says error Ethernet does not, code 10

  My computer is a Vista desktop Dell Vostra.  I've upgraded to Windows 7 and did not like (a lot of my programs wouldn't run well on it) so I tried to demote him back to Vista.  Now my ethernet does not work.  The drivers are there, but he says won't work, code 10.  How can I fix it?  I can't solve the problems on the computer, because I have no network.

  Hello

  go to dell and get the latest drivers for vista for your machine using one, you're on to get here

  Save the drivers for the flash player and then transfer them

  http://support.Dell.com/support/downloads/index.aspx?c=us&l=en&s=Gen

• Realtek fast ethernet card does not work on laptop with Vista

  My realtek fast ethernet does not work with my windows, what can I do about it?

  I have no internet access on my laptop

  Go to the website of the manufacturer of your computer/laptop > drivers and downloads Section > key in your model number > look for the latest Vista drivers > download/install them.

  The computer you are using now if you have an Internet connection with the other > download / save drivers > copy them into Flash Drive > transfer / install on another computer/laptop.

  See you soon.

  Mick Murphy - Microsoft partner

• problem with Boot Camp, VMware Fusion 3, ethernet does not (not driver)

  Hello guys,.

  I have Windows 7 Pro 64 bit installed in Boot Camp and I'm running as a virtual machine using VMware Fusion OSX 10.6.6 3.1.2.

  The problem I have is that the ethernet does not work under VMware, even with VMware Tools installed.  Device Manager shows no driver installed.

  I googled and found a lot of suggestions to add ethernet0.virtualDEV = "e1000" to the simultaneous file, but I looked and this line is already there.

  I tried reinstalling VMware, VMware Tools, the Boot Camp drivers, NIC Add/Remove VMware settings, change NAT to the deck and vice versa. Nothing works.

  Any suggestions?

  The CARD is an Intel PRO 1000 MT and uses the E1G6032E.sys driver that is located in the:

  C:\Windows\System32\DriverStore\FileRepository\nete1g3e.inf_amd64_neutral_7f08406e40c6ede2

  You will need to copy the 3 files to a temporary folder or on the desktop to be able to access it from the device for a manual installation manager.

• Ethernet USB adapter does not work after update to sierra mac

  Ethernet USB adapter does not work after update to mac sierra.

  Please solve this problem as soon as POSSIBLE

  Hello guatamshah,

  If your USB to ethernet adapter does not work now that you have upgraded to Mac OS Sierra, there are a number of things we can try to get it working again.

  The first thing we want to do is to reset the SMC and the NVRAM on your Mac.
  Reset the management system (SCM) controller on your Mac.

  https://support.Apple.com/en-us/HT201295

  How to reset the NVRAM on your Mac.
  https://support.Apple.com/en-us/HT204063

  If the adapter is not still work after only two resets check to see if your Mac recognizes the device properly in the information system. In the Apple Menu, choose about this Mac, and then click the button 'system report... '. ». Once you have the window open system information, see the USB category on the left.
  OS X: about system information and System Profiler

  https://support.Apple.com/en-us/HT203001

  If she does not appear in the information system, see the articles below.
  macOS Sierra: If a USB device does not work

  https://support.Apple.com/kb/PH25343

  macOS Sierra: check your device's USB connection

  https://support.Apple.com/kb/PH25567

  However, if you do not see the device in system information, you may need to verify that network service appears correctly. In the Apple menu, choose system then Network preferences. You should see an entry similar to "Ethernet" on the left. If no, see the steps in the article below to add. Once add, test to see if your connection works with a disabled Wi - Fi connection.

  macOS Sierra: Add a network service
  https://support.Apple.com/kb/PH25279

  If it does not appear in the network, please let us know what you see on the right when you select the service, and the name of the service as it appears and we can go from there!

  Kind regards.

• Help does not work, the url links do nothing

  I have windows 8.1.
  When in thunderbird, I press F1 and nothing happens.
  Even clicking on the Release Notes or the help contents.
  The same thing happens when I click on a link to a URL in a received email.
  I went through all the help on the net and none doesn't change anything.
  I use Firefox and it is set as my default browser.

  OK, I found the problem.
  Here is the solution suggestedin https://support.mozilla.org/en-US/kb/hyperlinks-in-messages-not-working
  Make sure that no application is specified for the HTTP content type
  

  In Thunderbird, you can specify an action that occurs when you click on the different types of attachments and content online. If the action for the HTTP / HTTPS content type is broken, this will prevent the links to open correctly.

  If the operating system default browser is specified correctly as described above, it is not necessary to specify an action for the HTTP / HTTPS content type. To check this setting, select Tools | Options (Windows) or Thunderbird | Preferences (Mac and Linux). Click on the attachments page. If HTTP or HTTPS are listed in the column to the Content Type, remove the action or make sure that the specified action is correct.
  

  Even with its value (by default) Firefox, it does not work.

  If you reset it asking when you say to use Firefox and click the box to remember... area so it will work and to remember. The option looks the same in Thunderbird / Options / attachments / incoming, but it behaves differently. (must love microsoft eager, eager to Internet Explorer by default so that they can track everything you do)

  Also delete the entries for http and Https also works as well as deleting the file mimeTypes.rdf together.

  Can't really tell if the problem lies in the mimetypes.rdf layout I have or how Windows 8.1 manages permissions (which seem to be a little weird with a strange "account unknown" created if Firefox is installed).

• Since the upgrade of my new tab does not work, I press on the + icon and nothing

  Since the upgrade of my new tab does not work, I press on the + icon and nothing

  Try Firefox Safe mode to see if the problem goes away. Firefox Safe mode is a troubleshooting mode that disables certain parameters, disables most Add-ons (extensions and themes).

  If Firefox is open, you can restart Firefox Safe mode in the Help menu:

  • In Firefox 29,0 and above, click on the menu button

    

    click Help

    

    then select restart with disabled modules.

  • In previous versions of Firefox, click on the Firefox button in the upper left of the Firefox window and click help (or click on help in the Menu bar, if you do not have a Firefox button) and click on restart with disabled modules.

  If Firefox is not running, you can start Firefox in Mode safe mode as follows:

  • On Windows: Hold down the SHIFT key when you open the desktop Firefox or shortcut in the start menu.
  • On Mac: Hold the option key during the startup of Firefox.
  • On Linux: Exit Firefox, go to your Terminal and run firefox-safe-mode
    (you may need to specify the installation path of Firefox for example/usr/lib/firefox)

  When the Firefox Safe Mode window appears, select "start mode safe."

  

  If the issue is not present in Firefox Safe Mode, your problem is probably caused by an extension, and you need to understand that one. Please follow the section Troubleshooting extensions, themes and problems of hardware acceleration to resolve common Firefox problems to find the cause.

  To exit safe mode of Firefox, simply close Firefox and wait a few seconds before you open Firefox for normal use again.

  When find you what is causing your problems, please let us know. This might help others with the same problem.

• I'm on windows 7 and I upgraded to 10.0.2 and now it does not open. I completely deleted firefox and transferred again, and it does not work. So my last attempt, I removed firefox 10 again and downloaded the beta version and once more nothing.

  I'm on windows 7 and I've upgraded to the latest version of firefox, and now it will not open. I completely deleted firefox and transferred again, and it does not work. Then, I was that he could get through my firewall, and that has not worked. So my last attempt, I removed firefox 10 again and downloaded the beta version hoping that would make it and once again, nothing. It opens at all. Please help - y at - it a live chat or a number to speak to someone at Firefox?

  -Microsoft got a big update last night for the Windows 7 and I came this morning I was wondering if the update would help my FireFox. I thought it might because a lot of things in this forum said it was a security problem and they have been updated with security updates. SHAZAM! Firefox is now the new my browser to goto. Very happy to resume. Once more I did anything this morning, but click the icon after the big windows 7 update and we're back in business. Thanks for all your help!