Customize the FDM process monitor reports

Similar Questions

• Customize the SRM process for a single page?

  Hello
  
  After using the wizard to create a report, it is possible to customize the MRU/DSM process for this page without editing for all pages? I think I probably need to go to some effort to write my own... but I thought I would ask to avoid possibly re - invent the wheel...
  
  See you soon,.
  
  Joseph

  You cannot change the standard process and you will need to write your own if you need more. What is an update of the single line or a tabular form?

  Denes Kubicek
  -------------------------------------------------------------------
  http://deneskubicek.blogspot.com/
  http://www.Opal-consulting.de/training
  http://Apex.Oracle.com/pls/OTN/f?p=31517:1
  -------------------------------------------------------------------

• Report to the payroll process and reports

  Hi all
  
  I have a requirement in which I need to run the payroll for 4 different operating units and then about 20 reports to be run. Now, the user must run payroll 4 times and run these concurrent requests (about 20). I created a set of report and clubbed all reports and its working fine. But the only problem here is that the user must enter the settings for all of the reports even if the setting is the same for all reports with additional elements in some reports. I want to give the user the flexibility to enter the date only, which is a dynamic parameter and all other parameters will be static as this date should be used in all reports.
  
  How can I do this?
  
  Concerning
  Rahman

  I assume you are using sets of request to submit concurrent programs in order. To share settings between concurrent programs. Follow the procedure below. I take an example of sharing of the selected parameters of Consolidation between the salary demands run and prepaid expenses.

  1 define a set request with first floor as payroll run and second stage as expenses paid in advance.
  2. in the window of stadiums, select the simultaneous payroll program run and click on queries to launch to scene queries window.
  3. click on the settings button to launch the window of query parameters.
  4. against the setting of the value of Consolidation enter a value (say, X_CONSOLIDATION_SET) as a shared parameter. Note that even if a LOV is attached to it, it does no validation. Then enter any free text (here X_CONSOLIDATION_SET). Make sure the show check box is checked.
  5. close the window of query parameters and stage requests window after saving it.
  6 now select the concurrent payments program in stages window and click queries, and then the settings button to launch the application settings window.
  7. against the Consolidation of the defined parameter, select the value of the shared parameter that was entered in the previous step (i.e. X_CONSOLIDATION_SET) from the LOV. You can uncheck the show to hide this setting. Save the record.

  So now the user can see that a single parameter for the game of Consolidation, and then this value is passed to the other simultaneous program also.

  I hope this helps.

  Kind regards
  Sharath

• Including a new report of process monitor

  Hi all
  
  I was wondering is adding a new type of report on the Workbench under process monitor reports (default reports are: Process Monitor, Process Monitor with locks, all categories of process, process status period monitor range, process monitor sorted by location hierarchy) I might modify the information showed by this 'new report '.
  
  For example if I generate the process with locks monitor, it will display all only place that I have in my application, but I need this 'new report' to see the only some of these places filtered by an attribute, I supposs the correct way to do currently to locate and modify the script being called by the adapter to publish this report. The problem is that I can't find what is called script.
  
  I'm wrong and this publication process is done through a already compile library, a .dll file? If this is the case is anyway to replace this call?
  
  I hope I made my problem clear enough
  
  Thank you
  
  Published by: HFMColUser on 26 - it is a-2011 15:41

  Hello
  Log on to FDQM (FDM) work bench customer, and then click Reports tab.

  Copy the report you want to edit and paste (I prefer to do it this way, we will create all the problems in the existing reports)
  change the description of the report.

  Right-click on the report now. Definition of report clcik properties, tab click SQL on the top.

  Now add vpartcatpercartesian.partname like '% E '. so, you will get only the localities beginning with E in your report.

  Published by: PadmajaV on August 27, 2011 03:15

• Linux process monitoring

  I just installed NMS.

  I want to follow some linux process, I can monitor basic server stuff and set alerts for up/down interface... I get the email alert.so it works fine...

  I read on the forum above to open this post...

  1 there is not an error or omission in the supervision of the State... and the current process monitor is Ok.

  2. I have the same problems as the 2 another post I found in this community...

  I set the alert to send an e-mail if the process is NOT running... but the process is running and I get the alert...

  I set the alert to send an e-mail if the bias is running... I stop the process and I get the warning that the process is running...

  I check the process with the command ps - ef too...

  I tried with centos and debian 607. same problem with both...

  is this a bug? NEM 6.8.24479 or am I missing something...?

  Hello

  We have already discovered this and Quest were recognized as a bug - BUG ID 2792 "alert message indicates that the process down when they are running. We have no date yet for a fix.

  Brian

• Customize the table.

  Hello

  Please see below to customize table screenshot.

  We can store the lines of a specific column in customize the table. Please explain this.

  

  Kind regards

  Irfan

  Hello Irfan,

  I think that there is no typo. It is a part of techniques that could be used to customize the output of monitoring, right?

  'Store' should be 'Sorted', because we are talking about out here, so no "storage" of everything that happens, and more is not supposed to 'store' lines by a column, it not?. Anyway, you can indeed 'Sort' lines by a specific column when you simply click the column you want, which would then sort the output ascendants and descendants (the changes with each click)

• How to customize the DIAdem report export function Menu PowerPoint?

  H all,.

  I can define another "Power Point of export" script to run when you select the menu if "Diadem report' drop-down"Export PowerPoint"a file?

  I know that this menu using the template file to "C:\Program Files (x 86) \National 2012\Resource\PowerPointTemplate.ppt.    My problem is that I cannot 'customize' the PPT template enough to get some items to position correctly on the slides.

  What I did change the script "C:\Program Files (x 86) \National 2012\Examples\Documents\REPORT_Layout_to_PowerPoint.VBS" with the changes I need, set the model to use ppt.  Run the script, and it works as it should.   (This script is not related to the pull down menu function - I maybe something set wrong somewhere).

  I want to get out of having to open this script whenever I want to create a ppt.  I'd rather select the menu drop-down.  Do the traction to the low 'export PowerPoint' use a defined script?

  Thank you

  John

  Hi John,.

  If you are using DIAdem before 2015, you old syntax to change the menu. Here is an example:

  Dim strPanel, strMyMenu, intCount
  
  strPanel = 'REPORT '.
  
  strMyMenu = "list of menus in DIAdem ' & strPanel & «:»»»
  
  Call WndOpen (strPanel)
  
  Call MenuItemCountGet (strPanel, "M1")
  
  IntCount = 1 to MenuItemCount
  
     Call MenuItemInfoGet (strPanel, "" M1. "") & intCount)
  
     strMyMenu = strMyMenu & + "\n" & MenuItemTitle & "-" & intCount
  
  Next
  
  Call MsgBoxDisp (strMyMenu)
  
  strMyMenu = «»
  
  Call MenuItemInfoGet (strPanel, "M.1.14")
  
  strMyMenu = "pos. 14: '& MenuItemTitle '.
  
  Call MsgBoxDisp (strMyMenu)
  Call MenuItemChange ("REPORT", "M.1.14", "My PPT", "call Msgbox (""Hello" "\" "")
  
  

  Greetings

  Walter

• Lenovo T410s and Mini Dock Plus Series 3 with 2 monitors DVI, white screen during the boot process

  Hello

  I'm having a problem with the configuration of my lenovo thinkpad T410s.

  I have connected two 19' DVI monitors for the docking station, but during the startup process, I get no output on screens.

  After loading Windows 7, the windows login screen.

  In the BIOS all the graphics preferences are being "switchable graphics", because I also use it on business trips.

  Does anyone have an idea how to solve this problem?

  Thank you!

  Michael

  
  

• Foglight can monitor the WebSphere Process Server?

  You have experience in the monitoring of IBM products like WebSphere Process Server WebSphere Application Server-based? What about Portal Server?

  Thank you.

  Technically the Java agent monitors the Websphere server and whatever it is current running on a Websphere server support.

  We have customers using the agent Java for trade and Portal Server, I have not personally tested with the bailiff, but if it's a version supported Websphere server it should work.

  A couple of things I've seen with Logon/trade:

  1. in some cases, there is a need to play with the settings of the instrumentation to exclude classes called many be instrumented.

  2 transformation of URL is necessary because the URLS have parameters embedded in them, which makes the demand model are growing very fast.

  An example of transformation of URLS can be found here

  https://support.software.Dell.com/Foglight/KB/62707

  Hope this helps

  Golan

• ACS 5.2 monitoring & reporting the integrity of databases

  Hello

  Is it possible to change or remove the monitoring & reports on GBA 5.2, 1121 device database? It is a question for certain non-conformities of the security policy.

  ACS CLI interface, it is possible to remove ACS log files, but I think that it is not possible to alter or change the database monitoring & Reporting. Is this true?

  Hello

  I don't see this as possible. As when you connect to the CLI of ACS you go just the stuff of ACS application and some newspapers. Database cannot be deleted or changed from there

  Thank you

  Waris Hussain

• Customize the Action menu in the interactive report

  To change the word 'Action' in the menu of the interactive report.

  Apex 4, we had the 'Image of the Action menu' option, but the Apex 5 this option disappeared.

  This isn't in known issues in the Apex 5!

  Someone knows how to set an image or other text to the menu Action interactive report?

  Anderson.Ferreira wrote:

  To change the word 'Action' in the menu of the interactive report.

  Apex 4, we had the 'Image of the Action menu' option, but the Apex 5 this option disappeared.

  This isn't in known issues in the Apex 5!

  Someone knows how to set an image or other text to the menu Action interactive report?

  Why do you need to change?

  Follow the instructions in 'Translating Messages used internally by Oracle Application Express' to create a custom text for the message of the APEXIR_ACTIONS system. Available for translation/customization internal messages are listed in these tables.

• Customize the process of downloading files by replacing the UploadedFileProcessor class

  12.1.3 Jdev

  Hello

  I have an af:inputFile on the page and want to customize the file loading process by replacing the class org.apache.myfaces.trinidad.webapp.UploadedFileProcessor together with the < downloaded-file-processor > element in the config.xml configuration file - Trinity.  This is because we want to save the file directly on the database rather than store them in temporary storage.  No samples of writing a custom class?

  I understand in the custom class, it must implement the UploadFileProcessor interface and override the method:

  processFile (object request, file UploadedFile)

  What is the motion of object?  And how to treat?

  All advice is appreciated.

  Thank you

  -Mina

  Thanks Timo.  Excellent suggestions!  I found the class that implements UploadedFileProcessor is org.apache.myfaces.trinidadinternal.config.upload.CompositeUploadedFileProcessorImpl.java

  Thank you

  -Mina

• Run the FDM report on several places

  Hello
  
  We are the FDM 11.1.2.1. What I'm trying to do is the design/FDM reports may change so that she can turn on several locations. I can get the report to run on the current location, a location selected by the user or can get it to work on all locations (takes way too long). I want to be able to do is put up to run the report for all children under a review of control location. Anyone who has ever tried this or you have understand how? Any suggestion would be appreciated.
  
  Thank you
  Jason

  To think.

  The best way to proceed would be to have a stored procedure / SQL query that the report will hit that will give him exactly what he needs.

  -If you're OK with hard coding values in places, I agree that it is a good idea to group Tag. You can retrieve all the places with a query such as:

  select * from tPOVPartition where PartNotes = 'GroupNameHere'
  

  or assuming that it will be used where clause:

  Select blah blah blah
  the blah blah blah
  where blah blah blah and (PartitionKey to (select PartitionKey from tPOVPartition where PartNotes = 'GroupNameHere'))

  ------------------------

  -If you are NOT OK with rigid group coding labels and just want to let the natural hierarchy works, there is hope.

  By using the tStructParitionLinks table, you can browse the hierarchy and get your list.

  Assuming that You have nothing deeper that the 1 level, the SQL tracking will work:
  (NOTE: place of departure would be the parent and Endlocation child)

  SELECT     a.StartLocationID, a.EndLocationID, b.PartName
  FROM         tStructPartitionLinks AS a INNER JOIN
                        tPOVPartition AS b ON a.EndLocationID = b.PartitionKey
  where a.StartLocationID = 
  

  The problem here is that if you have several nested levels, this query will not return all the basic elements. If you need something to do, what you want to do is to create a nested stored procedure. I won't provide a because it would take me a bit to write.

  The basic premise is:
  -The stored procedure accepts an input parameter, ParentID
  -The stored procedure uses a temporary table to store the results of
  -The stored procedure keeps track of its recursive level and starts at one. (SQL Server handles this built in, assume as well done oracle)
  -When you call the routine, he takes the ParentID, analyzes the link Partition table and out of all the children who are directly linked to it.
  -For each of the children, it adds an entry to the temporary database table.
  -Then, it checks to see if this book of the child is also a parent in the table.
  -If it's a parent, he calls another instance of itself (stored procedure) this time passing the ID of the child as the ID of the parent
  -Possibly after you have exhausted all children/parents, you find yourself at the end of the initial call and at this stage, you return the content of the temporary table.

  ----------------------------------

  -A third option would be to use the FDM script to achieve this. In theory, you could throw something in a script, have it pull the list of children and do pass this info on to the report and run it. The following script will give you a list of children for a parent:

  Sub ShowChildren()
  '------------------------------------------------------------------
  'Hyperion FDM CUSTOM Script:
  '
  'Created By:       cbeyer
  'Date Created:       2012-02-22-10:43:06
  '
  'Purpose:
  '
  '------------------------------------------------------------------
  
  'Declare variables
  Dim lngLocID
  Dim lngParentID
  Dim strParentName
  Dim strChildren 
  
  'Get current ID by current POV
  'NOTE: You could easily change this around to accept a parameter, etc, by using GetName/GetID calls shown below.
  lngLocID = STRUCTMGR.fGetLocationIDFromName(API.POVMgr.PPOVLocation)
  
  'Get parent ID
  lngParentID = STRUCTMGR.fGetLocationParent("Controls", lngLocID)
  
  'Get Name of parent
  strParentName = STRUCTMGR.fGetLocationName("Controls", lngParentID)
  
  'Create recordset and Enumerate children
  With STRUCTMGR.frsChildrenAll("Controls", lngLocID)
     If Not .BOF And Not .EOF Then
         Do While Not .EOF
            strChildren = strChildren & .Fields("PartName").Value & vbCrLf
            .MoveNext
         Loop
     Else
         'No children
         strChildren = "Location has no children"
     End If
     'Close recordset
     .Close
  End With
  
  'Display the children information
  If LCase(API.DataWindow.Connection.PstrClientType) = "workbench" Then
       MsgBox "List of Children for " & strParentName & " : " & strChildren
  Else
       'Web Client (Set API action properties)
       RES.PlngActionType = 2
       RES.PstrActionValue = "List of Children for " & strParentName & " : " & strChildren
  End If
  
  End Sub
  

• How to customize the 10g for EBS R12 report part 2

  Hi hussein/helios,
  
  I want to customize the reprot of aging AP APXINAGE.rdf to change the condition where the column settings.
  I tried winscp program to my computer laptop windows 7 where I got developer suite 10 g installed.
  I tried to launch the report designer and open this program. But tell my Builder just crash
  
  «Builder has stopped working...»
  Windows will close the program and notify you of the solution.
  
  Are there other prerequisites that I have to do to avoid this error.
  I tried to create an intake test/reports and they work well.
  Maybe all the EBS reports are too large to load?
  
  Help, please...
  
  Thank you very much
  
  Ms. K

  Hello

  Developer Oracle 10 g is not certified for Windows 7 (see MOS 2213.1 Note).

  Suppose that there is a typo in here - Forms / Reports Builder 10 gr 2 or 11g Certification on MS Windows 7 [1112213.1 ID]

  Thank you
  Hussein

• What views of $ v can I use to monitor the parallel process?

  Hi all
  
  The version of DB is 11.1.
  
  I ran a sql in parallel. And I got the SessionID for the session.
  
  But when I referred to v$ px_session, v$ px_process or sql_monitor $ v even with this session id, I have nothing from these points of view.
  
  The exectuion plan showed that it used parallel exectuion.
  
  Could someone tell me what is the problem with my approach? Or it means that my sql has not used the parallel at all?
  
  Best regards
  Leon

  PARALLEL_MAX_SERVERS to 0 for the database instance. Confirm that there are no PX processes running on the instance of database (these would be process "ora_p0xx_SID", where xx is 00 to 99 (or 128)) on the server.

  Then set PARALLEL_MAX_SERVERS to 8 or 16 or more.

  Run your query/dml.

  Now, see if the ora_p0xx_SID process has created.

  Hemant K Collette