CVP: Survivability on a stand-alone scenario

Hello

According to CVP 3.1 SRND survival is not supported on a stand-alone scenario.

In any case, if the CVP is down or unreachable.

I should be able to get in touch with a

predefined IP phone extension.

Is this something we can do on the voice gateway configuration?

Survivability.Tcl can be used as well?

Any help will be apreciated.

Christian

Hi Christian,

first of all, you have the option of deploying a doorman and if the CVP doesn't return the call to the custodian to send it directly to an extension of call manager.

If I recall right in your scenario, you have a GK, I think you can try to play with the priority of dialpeers and have a second available dialpeer in which case the SVC is not, this has some issues that you need to monitor closely, if your solution is to take more calls, you designed for summits, then this lower dialpeer will try to route the calls that would be otherwise treated alongside in CVP.

Third alternative uses a tcl script custom as you suggest, but it would not be easy to overcome the limitation even recommend do not deploy in a stand-alone environment.

Kind regards

Riccardo

Tags: Cisco Support

Similar Questions

  • Mode conversion controller in stand-alone mode in cisco 1702

    I have cisco AP 1702 and in controller mode. I don't have the controller so want to convert in stand-alone mode. I went through various items for this and found this interesting way to do.

    Run this command to convert:

    # swarm - Standalone mode
    # reload

    I found this on this link: http://community.arubanetworks.com/t5/Controller-less-WLANs/How-to-conve...

    Similarly, going through the longer process, I downloaded this for the standalone mode: https://software.cisco.com/download/release.html?mdfid=286281141&flowid=...

    and for stand-alone mode, I have this one: https://software.cisco.com/download/release.html?mdfid=286281141&flowid=...

    Here are the files I'm looking for?

    Help, please.

    This original link can cause a headache for an Aruba AP which is different.

    Try this method:

    https://ripplesinharmony.WordPress.com/2013/01/28/downgrading-a-Cisco-lightweight-AP-to-autonomous-mode/

    The software of the first link you posted (https://software.cisco.com/download/release.html?mdfid=286281141&flowid=71622&softwareid=284180979&release=15.3.3-JC1&relind=AVAILABLE&rellifecycle=ED&reltype=latest) will work for the standalone mode (stand-alone).

    This second link is light which means the controller-based and you don't want that for this scenario.

    See you soon,.

    Ric

  • 2602 AP in stand-alone - using the two bands

    We generally use the series 2602 AP in light mode, however I have a scenario where we will install one with the stand-alone software.  I understand that we will not be able to utilze certain features that you get with the WLC as RRM, unreliable detection and clean air.

    We want to utilze the 5 GHz and 2.4 GHZ bands.  To do this with the autonomous access point 2602, will we have to set up 2 separate SSID?  I really don't want to do this if I don't have to minimize confusion for customers. Thank you.

    This decision is based on the client machines.  The device will choose who it will associate with.  You could always tweaking the settings on the device wireless to a single band favorite on the other.  There isn't any setting on the AP have devices prefer one over the other.  I hope this helps.

    Thank you

    Scott

    Help others by using the rating system and marking answers questions as 'response '.

  • Cannot deploy the listener. Nor to stand alone, or with glass fish

    Hi guys,.

    I use the latest versions of:
    Apex 4.1
    Oracle 11g xe
    apex_listener.1.1.3.243.11.40
    GlassFish - 3.1.1
    Windows 7-64

    I tried to deploy APEX yesterday.
    To fish from glass: I followed exactly the steps mentioned in the documentation. but I get this error:
    State HTTP 503 - requested url http://192.168.1.33:8080 / apex / is currently unavailable.
    type of status report
    URL messageRequested http://192.168.1.33:8080 / apex / is currently unavailable.
    DescriptionThe requested service (requested url http://192.168.1.33:8080/apex/ is currently not available.) is not currently available.
    GlassFish Server Open Source Edition 3.1.1
    yesterday I managed to deploy with stand-alone mode and created a service for her, but the service does not start

    I got this error
    windows failed to start the service apex10 on the Local computer.
    The service has returned an error. This could be an internal Windows error or an error internal servcie
    . So, I was forced to keep the open CMD. Someone reboot the server. I tried to redeploy again, but I get "internal error." And here you can find put it:
    C:\Users\FAM_SERVER>cd C:\Program Files (x86)\Java\jre6\bin\

C:\Program Files (x86)\Java\jre6\bin>java -Dapex.port=2586 -Dapex.home=D:\apex_l
istener -Dapex.images=C:\apex\images -jar D:\apex_listener\apex.war
INFO: Starting: D:\apex_listener\apex.war
 See: 'java -jar apex.war --help' for full range of configuration options
INFO: Extracting to: D:\apex_listener
INFO: Using classpath: file:/D:/apex_listener/apex/____embedded/start.jar:file:/
D:/apex_listener/apex/WEB-INF/lib/apex.jar:file:/D:/apex_listener/apex/WEB-INF/l
ib/commons-fileupload-1.2.1.jar:file:/D:/apex_listener/apex/WEB-INF/lib/je-4.0.1
03.jar:file:/D:/apex_listener/apex/WEB-INF/lib/ojdbc6.jar:file:/D:/apex_listener
/apex/WEB-INF/lib/ojmisc.jar:file:/D:/apex_listener/apex/WEB-INF/lib/poi-3.6-200
91214.jar:file:/D:/apex_listener/apex/WEB-INF/lib/ucp.jar:file:/D:/apex_listener
/apex/WEB-INF/lib/xdb-11.2.0.jar:file:/D:/apex_listener/apex/WEB-INF/lib/xmlpars
erv2-11.2.0.jar:
INFO: Starting Embedded Web Container in: D:\apex_listener
Enter a username for the APEX Listener Administrator [adminlistener]: admin
Enter a password for admin:
Confirm password for admin:
Enter a username for the APEX Listener Manager [managerlistener]: manager
Enter a password for manager:
Confirm password for manager:
Nov 17, 2011 9:22:16 AM ____bootstrap.Deployer deploy
INFO: Will deploy application path=D:\apex_listener\apex\WEB-INF\web.xml
Nov 17, 2011 9:22:17 AM ____bootstrap.Deployer deploy
INFO: deployed application path=D:\apex_listener\apex\WEB-INF\web.xml
Nov 17, 2011 9:22:17 AM com.sun.grizzly.Controller logVersion
INFO: Starting Grizzly Framework 1.9.18-o - Thu Nov 17 09:22:17 GST 2011
INFO: Please complete configuration at: http://localhost:2586/apex/listenerConfi
gure
Nov 17, 2011 9:22:19 AM com.sun.grizzly.http.servlet.ServletAdapter doService
SEVERE: service exception:
java.lang.IllegalStateException: Not yet initialised
        at oracle.dbtools.apex.config.ApexConfig.notInitialized(ApexConfig.java:
249)
        at oracle.dbtools.apex.config.ApexConfig.getFile(ApexConfig.java:234)
        at oracle.dbtools.apex.config.ApexConfig.exists(ApexConfig.java:63)
        at oracle.dbtools.apex.admin.AdminManager.populateAdminFieldValues(Admin
Manager.java:868)
        at oracle.dbtools.apex.admin.AdminManager.getFieldMaps(AdminManager.java
:841)
        at oracle.dbtools.apex.admin.Admin.displayAdminHTML(Admin.java:164)
        at oracle.dbtools.apex.admin.Admin.displayAdminPage(Admin.java:147)
        at oracle.dbtools.apex.admin.Admin.doGet(Admin.java:50)
        at javax.servlet.http.HttpServlet.service(HttpServlet.java:707)
        at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
        at com.sun.grizzly.http.servlet.FilterChainImpl.doFilter(FilterChainImpl
.java:195)
        at com.sun.grizzly.http.servlet.FilterChainImpl.invokeFilterChain(Filter
ChainImpl.java:139)
        at com.sun.grizzly.http.servlet.ServletAdapter.doService(ServletAdapter.
java:376)
        at ____bootstrap.SecureServletAdapter.doService(SecureServletAdapter.jav
a:72)
        at com.sun.grizzly.http.servlet.ServletAdapter.service(ServletAdapter.ja
va:324)
        at com.sun.grizzly.tcp.http11.GrizzlyAdapter.service(GrizzlyAdapter.java
:166)
        at com.sun.grizzly.tcp.http11.GrizzlyAdapterChain.service(GrizzlyAdapter
Chain.java:180)
        at com.sun.grizzly.tcp.http11.GrizzlyAdapter.service(GrizzlyAdapter.java
:166)
        at com.sun.grizzly.http.ProcessorTask.invokeAdapter(ProcessorTask.java:7
91)
        at com.sun.grizzly.http.ProcessorTask.doProcess(ProcessorTask.java:693)
        at com.sun.grizzly.http.ProcessorTask.process(ProcessorTask.java:954)
        at com.sun.grizzly.http.DefaultProtocolFilter.execute(DefaultProtocolFil
ter.java:170)
        at com.sun.grizzly.DefaultProtocolChain.executeProtocolFilter(DefaultPro
tocolChain.java:135)
        at com.sun.grizzly.DefaultProtocolChain.execute(DefaultProtocolChain.jav
a:102)
        at com.sun.grizzly.DefaultProtocolChain.execute(DefaultProtocolChain.jav
a:88)
        at com.sun.grizzly.http.HttpProtocolChain.execute(HttpProtocolChain.java
:76)
        at com.sun.grizzly.ProtocolChainContextTask.doCall(ProtocolChainContextT
ask.java:53)
        at com.sun.grizzly.SelectionKeyContextTask.call(SelectionKeyContextTask.
java:57)
        at com.sun.grizzly.ContextTask.run(ContextTask.java:69)
        at com.sun.grizzly.util.AbstractThreadPool$Worker.doWork(AbstractThreadP
ool.java:330)
        at com.sun.grizzly.util.AbstractThreadPool$Worker.run(AbstractThreadPool
.java:309)
        at java.lang.Thread.run(Unknown Source)
Nov 17, 2011 9:22:19 AM com.sun.grizzly.http.servlet.ServletAdapter doService
SEVERE: service exception:
oracle.dbtools.rt.service.ServiceLocatorException: There are no services defined

        at oracle.dbtools.rt.service.ServiceLocator.acquireAll(ServiceLocator.ja
va:91)
        at oracle.dbtools.rt.service.ServiceLocator.acquire(ServiceLocator.java:
74)
        at oracle.dbtools.rt.service.ServiceLocator.acquire(ServiceLocator.java:
85)
        at oracle.dbtools.rt.web.HttpEndpointBase.dispatchers(HttpEndpointBase.j
ava:138)
        at oracle.dbtools.rt.web.HttpEndpointBase.service(HttpEndpointBase.java:
85)
        at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
        at com.sun.grizzly.http.servlet.FilterChainImpl.doFilter(FilterChainImpl
.java:195)
        at com.sun.grizzly.http.servlet.FilterChainImpl.invokeFilterChain(Filter
ChainImpl.java:139)
        at com.sun.grizzly.http.servlet.ServletAdapter.doService(ServletAdapter.
java:376)
        at ____bootstrap.SecureServletAdapter.doService(SecureServletAdapter.jav
a:72)
        at com.sun.grizzly.http.servlet.ServletAdapter.service(ServletAdapter.ja
va:324)
        at com.sun.grizzly.tcp.http11.GrizzlyAdapter.service(GrizzlyAdapter.java
:166)
        at com.sun.grizzly.tcp.http11.GrizzlyAdapterChain.service(GrizzlyAdapter
Chain.java:180)
        at com.sun.grizzly.tcp.http11.GrizzlyAdapter.service(GrizzlyAdapter.java
:166)
        at com.sun.grizzly.http.ProcessorTask.invokeAdapter(ProcessorTask.java:7
91)
        at com.sun.grizzly.http.ProcessorTask.doProcess(ProcessorTask.java:693)
        at com.sun.grizzly.http.ProcessorTask.process(ProcessorTask.java:954)
        at com.sun.grizzly.http.DefaultProtocolFilter.execute(DefaultProtocolFil
ter.java:170)
        at com.sun.grizzly.DefaultProtocolChain.executeProtocolFilter(DefaultPro
tocolChain.java:135)
        at com.sun.grizzly.DefaultProtocolChain.execute(DefaultProtocolChain.jav
a:102)
        at com.sun.grizzly.DefaultProtocolChain.execute(DefaultProtocolChain.jav
a:88)
        at com.sun.grizzly.http.HttpProtocolChain.execute(HttpProtocolChain.java
:76)
        at com.sun.grizzly.ProtocolChainContextTask.doCall(ProtocolChainContextT
ask.java:53)
        at com.sun.grizzly.SelectionKeyContextTask.call(SelectionKeyContextTask.
java:57)
        at com.sun.grizzly.ContextTask.run(ContextTask.java:69)
        at com.sun.grizzly.util.AbstractThreadPool$Worker.doWork(AbstractThreadP
ool.java:330)
        at com.sun.grizzly.util.AbstractThreadPool$Worker.run(AbstractThreadPool
.java:309)
        at java.lang.Thread.run(Unknown Source)
Nov 17, 2011 9:22:19 AM com.sun.grizzly.http.servlet.ServletAdapter doService
SEVERE: service exception:
oracle.dbtools.rt.service.ServiceLocatorException: There are no services defined

        at oracle.dbtools.rt.service.ServiceLocator.acquireAll(ServiceLocator.ja
va:91)
        at oracle.dbtools.rt.service.ServiceLocator.acquire(ServiceLocator.java:
74)
        at oracle.dbtools.rt.service.ServiceLocator.acquire(ServiceLocator.java:
85)
        at oracle.dbtools.rt.web.HttpEndpointBase.dispatchers(HttpEndpointBase.j
ava:138)
        at oracle.dbtools.rt.web.HttpEndpointBase.service(HttpEndpointBase.java:
85)
        at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
        at com.sun.grizzly.http.servlet.FilterChainImpl.doFilter(FilterChainImpl
.java:195)
        at com.sun.grizzly.http.servlet.FilterChainImpl.invokeFilterChain(Filter
ChainImpl.java:139)
        at com.sun.grizzly.http.servlet.ServletAdapter.doService(ServletAdapter.
java:376)
        at ____bootstrap.SecureServletAdapter.doService(SecureServletAdapter.jav
a:72)
        at com.sun.grizzly.http.servlet.ServletAdapter.service(ServletAdapter.ja
va:324)
        at com.sun.grizzly.tcp.http11.GrizzlyAdapter.service(GrizzlyAdapter.java
:166)
        at com.sun.grizzly.tcp.http11.GrizzlyAdapterChain.service(GrizzlyAdapter
Chain.java:180)
        at com.sun.grizzly.tcp.http11.GrizzlyAdapter.service(GrizzlyAdapter.java
:166)
        at com.sun.grizzly.http.ProcessorTask.invokeAdapter(ProcessorTask.java:7
91)
        at com.sun.grizzly.http.ProcessorTask.doProcess(ProcessorTask.java:693)
        at com.sun.grizzly.http.ProcessorTask.process(ProcessorTask.java:954)
        at com.sun.grizzly.http.DefaultProtocolFilter.execute(DefaultProtocolFil
ter.java:170)
        at com.sun.grizzly.DefaultProtocolChain.executeProtocolFilter(DefaultPro
tocolChain.java:135)
        at com.sun.grizzly.DefaultProtocolChain.execute(DefaultProtocolChain.jav
a:102)
        at com.sun.grizzly.DefaultProtocolChain.execute(DefaultProtocolChain.jav
a:88)
        at com.sun.grizzly.http.HttpProtocolChain.execute(HttpProtocolChain.java
:76)
        at com.sun.grizzly.ProtocolChainContextTask.doCall(ProtocolChainContextT
ask.java:53)
        at com.sun.grizzly.SelectionKeyContextTask.call(SelectionKeyContextTask.
java:57)
        at com.sun.grizzly.ContextTask.run(ContextTask.java:69)
        at com.sun.grizzly.util.AbstractThreadPool$Worker.doWork(AbstractThreadP
ool.java:330)
        at com.sun.grizzly.util.AbstractThreadPool$Worker.run(AbstractThreadPool
.java:309)
        at java.lang.Thread.run(Unknown Source)
Nov 17, 2011 9:22:19 AM com.sun.grizzly.http.servlet.ServletAdapter doService
SEVERE: service exception:
oracle.dbtools.rt.service.ServiceLocatorException: There are no services defined

        at oracle.dbtools.rt.service.ServiceLocator.acquireAll(ServiceLocator.ja
va:91)
        at oracle.dbtools.rt.service.ServiceLocator.acquire(ServiceLocator.java:
74)
        at oracle.dbtools.rt.service.ServiceLocator.acquire(ServiceLocator.java:
85)
        at oracle.dbtools.rt.web.HttpEndpointBase.dispatchers(HttpEndpointBase.j
ava:138)
        at oracle.dbtools.rt.web.HttpEndpointBase.service(HttpEndpointBase.java:
85)
        at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
        at com.sun.grizzly.http.servlet.FilterChainImpl.doFilter(FilterChainImpl
.java:195)
        at com.sun.grizzly.http.servlet.FilterChainImpl.invokeFilterChain(Filter
ChainImpl.java:139)
        at com.sun.grizzly.http.servlet.ServletAdapter.doService(ServletAdapter.
java:376)
        at ____bootstrap.SecureServletAdapter.doService(SecureServletAdapter.jav
a:72)
        at com.sun.grizzly.http.servlet.ServletAdapter.service(ServletAdapter.ja
va:324)
        at com.sun.grizzly.tcp.http11.GrizzlyAdapter.service(GrizzlyAdapter.java
:166)
        at com.sun.grizzly.tcp.http11.GrizzlyAdapterChain.service(GrizzlyAdapter
Chain.java:180)
        at com.sun.grizzly.tcp.http11.GrizzlyAdapter.service(GrizzlyAdapter.java
:166)
        at com.sun.grizzly.http.ProcessorTask.invokeAdapter(ProcessorTask.java:7
91)
        at com.sun.grizzly.http.ProcessorTask.doProcess(ProcessorTask.java:693)
        at com.sun.grizzly.http.ProcessorTask.process(ProcessorTask.java:954)
        at com.sun.grizzly.http.DefaultProtocolFilter.execute(DefaultProtocolFil
ter.java:170)
        at com.sun.grizzly.DefaultProtocolChain.executeProtocolFilter(DefaultPro
tocolChain.java:135)
        at com.sun.grizzly.DefaultProtocolChain.execute(DefaultProtocolChain.jav
a:102)
        at com.sun.grizzly.DefaultProtocolChain.execute(DefaultProtocolChain.jav
a:88)
        at com.sun.grizzly.http.HttpProtocolChain.execute(HttpProtocolChain.java
:76)
        at com.sun.grizzly.ProtocolChainContextTask.doCall(ProtocolChainContextT
ask.java:53)
        at com.sun.grizzly.SelectionKeyContextTask.call(SelectionKeyContextTask.
java:57)
        at com.sun.grizzly.ContextTask.run(ContextTask.java:69)
        at com.sun.grizzly.util.AbstractThreadPool$Worker.doWork(AbstractThreadP
ool.java:330)
        at com.sun.grizzly.util.AbstractThreadPool$Worker.run(AbstractThreadPool
.java:309)
        at java.lang.Thread.run(Unknown Source)
    Published by: Fateh November 16, 2011 21:42

    Published by: Fateh November 16, 2011 21:46

    Hi Fateh,

    If I do not Dapex.home in the 'startup script", so that this file exists?

    It will be in the directory temp of your users. The actual location of that APEX listener uses belongs to the output of the console at startup.
    But I recommend always using the apex.home parameter, then you can be sure where the APEX listener looking for him and that it is not deleted by some 'clean-up '.

    Yet, when I create a service for the 'start-up' file, I get the same error:

    What account name is the service that is supposed to work? If you do not apex.home , the temp directory will usually be different if you do not use your username. Therefore, you will need a Setup for the account that runs the service.

    So, I need to keep the open CMD...

    No, you could (and should) pipe the console output to a log file. See the full command line in the example I posted here: {message identifier: = 9606494}
    I think that this is the post you mentioned above...

    APEX earpiece not working only not with ORACLE XE (as I know, waiting for patch)
    so far I have faced a problem with Interactive reports do not work correctly with Glassfish

    There are two points to this inaccurate publication:
    1 there is a work around for this problem.
    2. the problem was resolved short after he acknowledged.

    There are many users using listener of the APEX with XE here in the forum. I have two bodies, including one with the new 11.2 XE and APEX 4.1, as in your scenario and it works very well.

    In general, I think that 4 apex is more stable than the Apex 4.1. Apex 4.1 I am disconnected for reason now... A few times, I click on the header of column in IR and takes time to load the values...

    Well, as far as I know, have evolved in the IRs, is not completely improbable that some of these changes could cause new problems. But I guess that you can find answers for this in the forum {forum: id = 137}.

    Do you have any suspicion regarding the glass fish? I deployed Apex listener by following the instructions in the documentation. Then click launch. Then it should start to use port 8080, but it did not work...!

    Hmmm... You see the page default GlassFish ("GlassFish Server - server running") when you callhttp://: 8080? Port number, it is not the APEX listeners case when you do not use offline...
    If you get a result of http://: 8080/apex you could look in the application log in you GlassFish for more information (like in the console in stand-alone mode).
    My first guess would be that you do not have confgured the APEX listener you still deployed. It should be noted that the GlassFish does not use the users temp temp directory, but has its own. So to call listenerConfigure after the first deployment or set up a config.dir with an existing apex - config.xml. I would recommend the latter strategy. You should read the article of the Guide of the Installation on the configuration file and how to set its location in the file web.xml or search the forum for this request (common)...

    -Udo

  • Carousel component and stand-alone Weblogic server problem.

    Hello! I have a problem after I deployed my application on stand-alone Weblogic Server. There is no error when I do the same local Weblogic Server. So, let's discuss.

    My App is deployed to new stand-alone WebLogic Server. I have the page with carousel cpmponent, when I visit I can see: http://my.jetscreenshot.com/2677/20101020-bvow-82kb

    When I navigate to another page by pressing the 'BACK' button, then I go to the master/detail page, see: http://my.jetscreenshot.com/2677/20101020-casn-19kb

    I see no data in the detailed form, but the data should be there. And when I try to navigate this page with buttons next, previous and so on, then I got an error in the browser, see: http://my.jetscreenshot.com/2677/20101020-cugj-20kb

    If I do the same scenario in my local server, then there is no problem.

    An interesting thing is that when I restert my stand-alone Weblogic Server and try to visit my pages in different order app - first visit master detail form and him visit my page to view carousel, so I have no errors. And after that I try to get my application by first scenario and no errors. So if I post the stand-alone deployment first visit master/detail form, then carousel. So before my app works well, but if I first visit page carousel after deployment stand-alone weblogic server. Then forward, I have problems as I said.

    The problem is the carousel component. If I delete and make the same scenarious on the stand-alone server, then there not a problem as I have menthioned before. ANY ideas what is wrong and why everything works correct on the local server?

    If you need more information, please let me know! Moreover, here you can download my App and try to deploy it to your own stand-alone Weblogic Server, app is here: http://www.failiem.lv/down.php?i=fwgzym & n = Test_carousel_in_standalone_weblogic_server.zip

    After downloading, run the scripts in the database project (see: http://my.jetscreenshot.com/2677/20101020-akcx-16kb)

    And after deploy you my application on STAND-ALONE weblogic server, visit the ViewCarousel.jspx page and in press the 'BACK' button and see what happens.

    Hope for your answers, cordially, Debuger!

    Debuger,
    of course, I ran your use case. And it worked on my environment.

    OK, my guess is that you hit the Bug 9183113. Brief summary, is that if you use createRootApplicationModule (...) outside the binding of the adf, the chances are that you break links to the other parts of the application that use the same definition of application module. In your test cases, you use createRoorApplicationModule (...) to stream image via a servlet in the browser. You use the same definition of application to the ruin of the application module. Sometimes it breaks resulting in the "no data found" links you see.

    The work-around, I found as it is to ensure that the servlet you use createRootApplicationModule, runs through the filter adfBindings. It worked for me, so give it a try.

    Open your web.xml file, select "Filters" and then in the table "adfBindings". In the tabs below the table select "filter mappings. He see you on entry fro "Faces Servlet". HJit green '+', select 'Servlet' as "Mapping Type", in the column mapping use the drop down arrow and select your 'ImageServletCarousel', 'Distributor Type' column select the checkboxes for 'Before' and 'ask '.
    Do the same for other servlets image you use and save your work.
    Recompile and build a new EAR and deploy it. See if that fixes your mistake.

    Timo

  • I need the Java Player for firefox on a stand-alone computer without internet access. I have internet access on another computer. How can I do this?

    I have a stand-alone computer (no internet access) with firefox to run the Java Player. I have internet access on another computer in order to download files and hover over things to the stand-alone computer to install. That do and where can I download and how I install on the stand-alone computer.

    Thank you

    Leroy

    Hi, to get the Offline Installer that you can use on the computer without internet access, please visit https://java.com/en/download/help/windows_offline_download.xml

  • How can I get Web sites to open in the stand-alone windows instead of all stacked in a single window?

    If I have a window open and click a link to open another, they pile up in one window instead of opening a new stand-alone window. How can I change this?

    Open options
    Tabs
    Top box uncheck the box which

  • How to record a loop of garageband as a stand alone on my ipad pro?

    Once I recorded a song, I want to save it as a file of music stand alone and keep it on my iPad pro. How do I do that?

    If I try to export to iTunes, it is not found in my music application.

    Hi Marco_Polo,

    Thank you for using communities Support from Apple.

    I see you want to record a song that you created in GarageBand on your iPad.  I don't know what application you are trying to save it to, or if it is a ring, then I suggest that you look through the information provided in the link below for your different sharing options.

    Sharing GarageBand songs

    Have a good.

  • I need to stop a download of the query, I thought a stand-alone application but turns require a higher level (FCPX) as a 'parent' and I do not who have, or want to buy.

    I need to stop a download of the query, that I thought a stand-alone application but turns require a higher level (FCPX) as a 'parent' and I do not have that, or I want to buy it.

    Motion IS a stand-alone application. It is mainly designed to make effects for Final Cut Pro X, but it is not necessary to have with FCPX nor is it necessary to have FCPX to create projects for other purposes. When you open the query, simply select project of work outside the FCPX motion. You can save regular projects of Motion anywhere on your system.

  • Problems with MAX tasks on different stand-alone

    Hallo!

    I have problems with my MAX-tasks and my V12 Dasylab on different stand-alone.

    I have 3 devices on the first PC.

    OR USB-6009 dev1

    NEITHER USB-6210 dev2

    NEITHER USB-6501 dev3

    Now, I had programmed a file Dasylab which uses the device 2 and device 3. Everythink worked fine. I exported my MAX configuration for unit 2 and unit 3 and imported on the second PC. But that Dasylab was not able to find the right tasks for my program on the second PC, even if MAX everythink that went well. The only solution was to delete all tasks and create them again. But then I tried to open the program stored on my first PC again and I had the same problem, Dasylab was not able to find the right tasks, only solution was to remove the stains and create them again. I tried to reset the configuration of my Dasylab with the "Synchronize with MAX-configuration" option, but it wasn't succsessful. DASYLab gave an errormessage, not mentioning not what exactly is the problem.

    Can anyone help?

    Thank you very much and have a nice day.

    Hilby

    Hallo Hilby,

    I think it can be more that can be solved on the Forum of NOR. I think you should contact your local dealer and ask for help directly.

  • Stand-alone application with LabView 7.0 get error cannot find DAQmx clear task.vi

    I tried to create a stand alone vi with the Build Application or shared Library (dll) in LabVeiw 7.0

    When I put it on another PC to test it I get the error "cannot find DAQmx clear task.vi.

    the other PC also has 7.0 and 8.1 DAQmx Labview.

    I think my problem is in the source tab, where you are supposed to add dynamic vi and support, I have search the forums and database of nor and have not found a solution.

    Hi LabTech09,

    When you run the executable file on the other computer, that's when you get this error?  You have the same exact versions of DAQmx and LabVIEW on both computers?  Is the dialog box allow you to navigate to the clear task.vi DAQmx?  If so, you can find these screws in C:\Program NIUninstaller Instruments\LabVIEW 7.0\vi.lib\DAQmx\configure\task.llb.  The executable runs on the development computer (the machine, it was compiled on)?

  • Stand-alone labview application (.exe file) does not run correctly

    Hi all

    I'm doing a labview application only to run on another computer (I never did this before).

    I went through the tools-> build application prompts and was able to build an exe file.

    the program is supposed to control a power meter and measures of power, then save them in a text file.

    When I run the exe, on the same computer, I compiled the exe, the program generates a text file to save data to, but he cannot communicate with the electricity meter.

    There are a few screws Sub and a dll file that are used to communicate with the electricity meter. Would it be possible that I am not say labview to correctly

    include these files when I create an executable?

    What are some common problems that arise when building stand alone applications that could be cause of my problems?

    And no one knows of any good tutorials on building applications stand alone in labview, other than the help files OR?

    Thanks for your help,

    Also, if you used the VISA, include the runtime with your Installer.

  • binary and generations of stand alone files

    Hello: I have an application that is running in 2014 of LabView which creates and reads several tables 3D (25 X 8 X 6) to and from binary files. Works very well in the development environment. Problem is that now I need to create a (stand-alone) version for the client. Binary file functions do not seem to work. Any help or advice would be apprciated.

    Yes, a very common error is to save files with a path relative to the VI that saves the file. A more portable solution for no-LabVIEW files is to define paths to compared to the output of the function of the Application directory.

    In the development environment, it returns the path where the project file. In the executable file it returns the path where the executable.

    Mike...

  • cRIO stand alone running

    Hello world

    I am beginner in LabVIEW and LabVIEW FPGA and RT. student internship that I work this month on FPGA project and my goal is to schedule a stand-alone on cRIO application.

    I got a CompactRIO 9002 with an AIO 9215 analog input module and use LabVIEW 13. This cRIO Gets an ethernet and a RS323 port.

    My request is to:-code FPGA by ethernet

    -acquire a signal input of the NI 9215 module

    -Send the data measured on a device (first on hyperterminal on PC and on an SD card or a storage device) by the port COM (RS232)

    My development was to: 1. create a new FPGA project

    2 code for the target FPGA vi and compile (InOut.vi)

    3 code another vi to run the cRIO from my computer (OpenCloseFPGA)

    At this stage, everything goes well and works and I followed the signal measured on OpenCloseFPGA.vi and my Pc Hyperterminal.

    Can I track this topic 'http://zone.ni.com/reference/en-XX/help/370622L-01/lvrthowto/rt_building_rt_app/' on the creation and deployment of a stand-alone application in real time. But my RT generated and deployed application nothing happens. I followed other tutorials on standalone RT but I still stuck...

    Could someone give me any tips or tutorials to help me?

    I found the solution, there is a mismatch and a mistake in my project.

    First, I use a cRIO 9002 and in building'step to unplugging it SSE2 option in "Advanced dialog box.

    See this topic.

    The second was a mistake from myself, I give an ethernet address to RT host that cannot run in a standalone application (wireless).

    Thank you for all your help.

  • stand alone compact rio

    Hi to everyone!

    I am a student of the University and for my thesis, I use a COMPACT RIO with neither 9205 and gps module, some measures aboard an eletric car, measures will be saved to a TDMS file in the RIO COMPACT by a stand alone configuration and without connection to a pc.

    The compact rio will begins with the car and it will go off with him also.
    So I have a question, how can I stop the VI within the CRIO before turning off the car?  or in TDMS data will be saved in the same way without close the VI within the CRIO before turning off the car?

    Thank you

    Hello antoniolc!

    There is no way of knowing inside CompactRIO, if the system will be shut down.

    You must use an external signal to find out when your car will be stopped.

    Or you can use a multiple TDMS file and like it, just the last TDMS file will be unreadable. But you can probably read all previous TDMS files.

    Best regards.

Maybe you are looking for