CWA vWLC wireless support

Similar Questions

• Does the Y570 Builtin Wireless Support 5 GHz band?

  I can't find supporting the 802.a only b and g

  It supports 5 GHz. or not?

  I don't see the 5 GHz. wireless network in my house only the 2.4 GHz. and I do not see the 802.a in the advanced properties of the wireless

  I agree with Duck3. Short answer, no.

  Intel Wireless - N 1000 is only B/G/N, none. So no ability to 5 GHz.

  DragonRider

• Cisco Ise 1.3 with Flex to connect wireless supported function

  Hello

  My environment is formed ROUND of flex-mode connection wireless and cisco Ise 1.3, these features are supported?
  Basic functions of the AAA
  profiling
  posturing
  Substitution VLAN
  Substitution of the ACL
  Comments commissioning

  TrustSec 2.0 this MDC is not supported? someone try this feature?

  These all work with ISE 1.3 and FlexConnect WLAN.

  You need the right license ISE - the type of mobility (wireless) license will cover everything. If you have wired and wireless, then you must have basic (for most features) + more (for profiling) + Apex (for Posturing).

• Qusetions about vWLC?

  Hello all,.

  I want to bulid a laboratory wireless env, vWLC is used, but I can't find where I could configure AP Manager interface vWLC.

  How do I creat an interface of the AP Manager?

  Also did you kindly could advise questions below?

  1. how many APs could support this dynamic management of AP?

  2. we cannot interface manager creat AP on vWLC as true WLC, right?

  3. How can I tell what 'Country Code' of my AP?

  4 document cisco says "Access Point must be 7.3 or later to join vWLC ', where I could find this version on my AP?

  When I ran 'show version' on my AP the release looks like "12.4xxx", where I could find this version?

  Thank you for your help.

  Hello

  1. how many APs could support this dynamic management of AP?

  AP Max supported by vWLC is from 200 to 3000

  2. we cannot interface manager creat AP on vWLC as true WLC, right?

  You can, but must create AP manager interface vWLC.Management Interface will do the job.

  3. How can I tell what 'Country Code' of my AP?

  Here is an example: AIR-CAP2702E -E- K9--> red E says its only support for europian countries.

  4 document cisco says "Access Point must be 7.3 or later to join vWLC ', where I could find this version on my AP?

  1. as vWLC first supports the version of the software is 7.3

  2. the AP must be compatible with vWLC

  See comptibility matrix:

  http://www.Cisco.com/c/en/us/TD/docs/wireless/compatibility/matrix/Compa...

  News: The AP once connect to vWLC, it will download the image of the vWLC.

  Concerning

  Remember messages useful rates

• Guest access with CWA on ISE

  Hi community support

  We implemented just CWA for wireless using ISE. However there is a problem, the redirect URL is a name, not an IP address and public use DNS servers dhcp, so CWA scope comments does not work unless we put society DNS servers.

  so... is my question possible to configure ISE to send the ip address instead of the name of redirection in CWA?

  Thanks in advance...

  Hello Julio,.

  So far, there is no way to use the name instead of IP. ISE has always required the IP of URL redirection. To understand how to work the CWA you can see the attached PDF file.

• Carrier support

  Is apple support reliance jio LTE in India?

  Otherwise, when it is available for iOS users?

  According to this paper supported, carrier wireless supported features for iPhone in Asia-Pacific - Apple supported only two companies taking charge of Apple are Airtel and Vodafone. The carrier must contact Apple about support.

• Tecra M2 and wireless network - signal strength problem

  Need advice buying wireless kit.

  I have a DSL phone line connection and I am currently using a Speedtouch USB modem connected to my workstation down.

  I have a laptop Toshiba Tecra M2 with construction of wireless support. I want to be able to share the internet connection which comes in the workstation down. I guess that my options for the workstation are to use a DSL wireless modem to share the internet connection or to use a PCI card in my computer. I tried them both.

  I first tried to set up an infra mode network with the laptop using a LinksysWAG54G which was connected to the telephone line and a computer. But the problem with that I was t couldn't do accept the subnet mask that my ISP (Lixxus) provided 255.255.255.255 (PPoA). This modem has all the masks of SN in a dropdown list, but mine isn't in this list. I returned this modem.

  I tried then set up an adhoc network purchase buy a PCI Wireless card for my desktop, and internet connection sharing etc. on the workstation. However, while it worked, and I could see the desktop of my laptop, the problem has been the wireless range. The signal disappear when I wore the laptop in the back room on the first floor. It would have been a distance of 10 meters in a straight line between the laptop and desktop. There are walls two bricks and a floor between the two machines. It seemed hopeless, so I sent the PCI card.

  I'm not sure what to try next.

  Any suggestions that I could try next?

  Suggested hardware?

  Signal strength - could the problem be that the antenna in portable insufficient Tosh - it too small?

  Hello

  I have the same situation at home. The best solution for this is to use the wireless router. Here you have the possibility to connect several computers desktop or laptop. In this case the configuration of wireless connection is very easy and it works fine. I also use it at home and in front of my house with no problems.

• My MAC Book Pro does support Wi-Fi 5 GHz?

  Dear,

  I need your help. I'll try to find the WiFi 5 GHz, but it does not appear in my Mac Book Pro while other computers and my Iphone 6s can and works perfectly. I don't know whether or not my Mac Book Pro supports 5 GHz. I would be grateful if someone could help me. Here are the details of my Mac Book Pro.

  MacBook Pro (13-inch, mid-2012)

  2.9 GHz of Intel Core i7 processor

  8 GB 1600 MHz DDR3 memory

  Card type: AirPort Extreme (0x14E4, 0xF5)

  Firmware version: Broadcom BCM43xx 1.0 (7.21.94.136.1a1)

  MAC address:

  Locale: ETSI

  Country code: QA

  Supported PHY modes: 802.11 a/b/g/n

  The supported channels: 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 149, 153, 157, 161, 165

  Wake On Wireless: support

  AirDrop: support

  Status: connected

  Million thanks in advance!

  The simple answer is no.

  DISPLAY
  Built-in display	13.3 inch (visible diagonal) backlit by bright panoramic LED
  Resolutions	1280 x 800 (native), 1152 x 720, 1024 x 640 and 800 x 500 pixels at 16:10 aspect ratio x. 1024 x 768, 800 x 600 and 640 x 480 pixels at 4:3 format; 1024 x 768, 800 x 600 and 640 x 480 pixels at 4:3 extended format; 720 x 480 pixels at 3:2 format. 720 x 480 pixels at 3:2 format stretched
  GRAPHICS
  Graphics card	Graphics Intel HD 4000
  Graphics memory	Up to 1 GB of DDR3 SDRAM shared with main memory
  Connection of the screen	Digital video output Thunderbolt
  Display stand	Support for up to two screens Thunderbolt
  Display modes	Dual extended display, copy video and AirPlay Mirroring
  External resolution	Up to 2560 x 1600 pixels

• Satellite L30-115 does support encryption WPA/WPA2?

  Can someone tell me if the built-in wireless support card Satellie L30-115 - Atheros5005, WPA/WPA2 encryption? So far, I can only use WEP security, it only allows me to use WPA.
  Y at - it an update of the driver or something else to support WPA?

  Hello

  Please check this announcement:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=12209

  Atheros AR5005G WLan card should support WPA and WPA2

  I would recommend using the Atheros Client utility for Wlan configuration.

  Please also see this Atheros site:
  http://www.Atheros.com/news/DLink_singlechip.html
  I found this info:

  ... The chip also supports the latest standards of WLAN, including a connection Wi - Fi Protected Access Security (WPA and WPA2) and 802.11i security improved by using Advanced Encryption Standard (AES) at the hardware level, without any reduction in performance...

• May 2nd Gen Moto G load wireless with QI?

  Hi all

  Just bought this phone to the United Kingdom. I have not really yet unfortunately but its on its way.

  Can someone please tell me if this phone supports (QI) Wireless charging?

  Currently use QI on my nexus products and love it.

  I also saw that you can do a mod with the old model of G using a wireless receiver, any good?

  Thanks in advance

  Paul

  Paul-

  The phone does not natively support wireless support.

  Mark

  Forums Manager

• I have a HP 620 laptop computer and a printer OfficeJet 4500 wireless. I can print wireless, but when I go to HP for Solutions to scan a document, it tells me that the printer is disconnected.

  I have a HP 620 laptop computer and a printer OfficeJet 4500 wireless.  I can print wireless, but when I go to HP for Solutions to scan a document, it tells me that the printer is disconnected.  There is nothing I can do to Solutions of HP to recognize the printer.  What causes this problem?

  Hello

  As OEM HP is responsible for the good operation of the printer and their
  drivers provided. Check with HP support, their documentation online and
  drivers and ask in their forums.

  Good luck, you need to update or reinstall the latest driver.

  HP - OfficeJet 4500 Wireless - drivers<- set="" to="" your="" version="" of="">
  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?product=3986399&LC=en&cc=us&DLC=en&lang=en&cc=us

  HP - OfficeJet 4500 Wireless - support and troubleshooting
  http://h10025.www1.HP.com/ewfrf/wc/product?product=3986399&LC=en&cc=us&DLC=en&lang=en&cc=us

  HP support/troubleshooting & drivers
  http://welcome.HP.com/country/us/en/support.html

  Contact HP
  http://welcome.HP.com/country/us/en/contact_us.html

  HP forums
  http://h30434.www3.HP.com/PSG/

  =============================================

  The main issue is probably the drivers, but these can help:

  Add or remove a printer
  http://Windows.Microsoft.com/en-us/Windows-Vista/add-or-remove-a-printer

  Solve printer problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

  Open the printer Troubleshooter
  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  Find the manufacturer's Web site
  http://Windows.Microsoft.com/en-us/Windows-Vista/find-a-printer-manufacturers-website

  Find and install printer drivers in Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-drivers

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• no adapter supported in the system

  No wireless support in the system card is available

  I have the netgear router

  Hello

  This message means that your computer (laptop, netbook, etc) not only no matter what wireless adapter. Or maybe the software you want to install, is not compatible with your hardware wireless on your computer.

  What is the netgear router? Can you write here the manufacturer and model number of this router?

  LC

• Wireless charging and Quick load 2.0 ratings?

  Hi, can someone sony staff advise me weather the coming Z5 (UK standard) will feature Wireless charging? And in addition the handset and charger fast 2.0 technology?

  Xperia Z5 runs a Qualcomm Snapdragon 810 processor that will support rapid v2.0 and the official quick charger from Sony is UCH10 (not sure if included in the box).

  Unfortunately, it does not support wireless support.

• Trying to connect using a 4 G Verizon Wireless USB Modem

  I'm tying to get an internet connection through my company of Verizon Wireless, with a 4 G USB Modem.  The latest information I got from them were to download a newer version of the VZ Access Manager from the internet.  When I did all downloaded correctly except the pilot does not, and then I learned that he was a "problem of Microsoft in all areas" and that I had to download a Pack from XP Smart.  However I get my updates on a regular basis and have done everything in my power to get my Vista Home Basic 32 Bit updated computer and keep says he is up to date and that the driver works correctly.  I have connected wih this unit for a day and 1/2 then it stopped working and I have not been able to operate since.  I logged until I downloaded the new version of VZ Access Manager.  I've uninstalled and reinstalled the software several times and have changed my USB port as well and even luck now, any ideas.  The new version has been for Compuers using Vista 32/64 and Windows 7.

  Hello

  Do you have an error message when you try to connect to Verizon Wireless USB Modem?

  Send the request in the Verizon wireless Support for assistance.
  http://support.verizonwireless.com/CLC/

  Hope this information helps.

• Cannot start Windows wireless.

  I tried to change the registry like malwarebytes to scan the laptop in question, these steps done I still can't the 'Wireless Service start' to work, any ideas? (DELL Latitude D630 - Vista Basic)

  I tried the other discussions on this topic and am still confused. I just want to see if there is anything that I can do the other then you try a reformat.

  Thank you.
  
  

  Hi IanLundstrom,

  1. don't you make changes to the computer before the issue occur?
  2. What is the exact error message you get?

  Try the steps from the following link:
  Windows wireless and wired network connection problems
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Dell implemented network and wireless Support Center http://www.Dell.com/content/topics/global.aspx/support/networking_wireless/wireless_portal?c=us&l=en