CWMS and WeTP simultaneously

Hello

We have a customer that deploys a solution of telepresence on premises which include (Unified 10.5 CM, MSD 14.6, vTS 4.1 3.0 XC, X8.5 EXP-C/E and CWMS 2.5). A new requirement came they want to allow endpoints SX80 & MX700 to lead a meeting of the Conference with Webex servers. AFAIK WebEx on cloud need to be enabled.

I have a few questions that I would like to ask some questions:

1 - since I was using a certain domain name (e.g. xyz.com) local CMWS, then I activate Webex on cloud using the same domain name, so I had two premises on and the cloud. If this is not the case, how the solution would be in this case?

2. that I would be able to integrate TMS, vTS, conductor and EXP-C/E with WebEx on Cloud (WeTP)

3 - What is the advantages that may be available in WebEx on cloud existed only not in CWMS in case customer has decided to use only WebEx on cloud?

4. What are the features that would be lost if changing the current local solution for including all the WebEx and telepresence solution on the clouds?

Thanks in advance.

Regrads,

AMR Sheriff

Hi Amr,

I'll try to answer your question:

1 - since I was using a certain domain name (e.g. xyz.com) local CMWS, then I activate Webex on cloud using the same domain name, so I had two premises on and the cloud. If this is not the case, how the solution would be in this case?

The Webex on the Cloud, the URL for web conferencing is usually . webex.com, while CWMS usually has a URL such as Webex.CompanyDomain.com. There is therefore no possibility to have conflict. You can have conflicts with Webex on cloud's ARM running in a public domain which is in the public domain even recorded with the webex account. This is because Jabber also questioned Webex trying to save with auto-discovery, as Webex Menssenger service is available for Jabber.

2. that I would be able to integrate TMS, vTS, conductor and EXP-C/E with WebEx on Cloud (WeTP)

Yes. As CWMS has no integration with the environment of telepresence.

3 - What is the advantages that may be available in WebEx on cloud existed only not in CWMS in case customer has decided to use only WebEx on cloud?

In my opinion, the main difference is the ability to integrate your existing Webex telepresence system. WebEx on Cloud usually provides most of the important features available on CWMS.

4. What are the features that would be lost if changing the current local solution for including all the WebEx and telepresence solution on the clouds?

For this particular question, I suggest you to contact your representative local Cisco, since it is rather a technical commercial subject. My personal opinion is that Webex on cloud has everything users need for web meetings.

Paulo Souza

Don't forget to note the useful answers and to mark your question as "answered" as appropriate

Tags: Cisco Support

Similar Questions

  • I would like to receive a notification on my Apple Watch and iPhone simultaneously the messages/IM; not one or the other.

    I would like to receive a notification on my Apple Watch and iPhone simultaneously the messages/IM; not one or the other.

    I understand that if my Apple Watch is unlocked (or on my wrist) incoming Message notifications will be displayed on my watch. This allows to bypass the notification on my iPhone for messages.  I would like to find a way for Message notifications to simultaneously alert me on my iPhone and Apple Watch.

    Thoughts?

    Hello

    If you disable the detection of wrist (on your iPhone, in the application of the watch, go to: Watch My > General > wrist detection), it will make all notification alerts to be delivered to both devices. However, you will not be able to benefit from features including screen Wake on wrist lift, Apple pay and one unblock after placing the watch on your wrist.

    If you want Apple to consider adding an option for notification alerts to be delivered for both devices regardless of the other settings, you can suggest here:

    https://www.Apple.com/feedback/watch.html

  • HP pavillion x 360 13-a020nr: is is possible to install m.2 ssd and hdd simultaneously in hp pavillion 360 13-a020nr x?

    Is is possible to install the m.2 ssd and hdd simultaneously in hp pavillion 360 13-a020nr x or I'll have to remove the hard disk to install the ssd?

    @VBenedichuk

    Most of the time in the manual it looks like there are limits.

    Example if SATA and M.2 settled m2 must be the bootable disc.

    Example, if m2 is installed, then the other drive should be an SSD.

    For yours, I see no limitation.

    REO

  • EMERGENCY: Opening of a MS Access 2003 database in Ms 2003 and Vista simultaneously irremediably corrupts the database, erasing all forms.

    EMERGENCY: Opening of a MS Access 2003 database in Ms 2003 and Vista simultaneously irremediably corrupts the database, erasing all forms.  It is a progressive company upgrade to Ms Windows and Office 2003 to Ms Vista and Office 2007.  Some users now have the Vista Machines and still others 2003 machines.  They all share the object database, which resides on a SQL Server.  When the database is opened in 2003 and Vista users at the same time, the forms are destroyed and the database is permanently damaged.

    Means of access:

    http://answers.Microsoft.com/en-us/Office/default.aspx

    Office at the above link forums

    http://social.answers.Microsoft.com/forums/en-us/addbuz

    Access support at the link above.

    They will help you with your questions of access when repost you in the Office Forums above.

    See you soon.

    Mick Murphy - Microsoft partner

  • I used REGEXP_REPLACE to remove Scott. is it possible to delete all information on Scott and storage simultaneously using REGEXP_REPLACE...?

    I used REGEXP_REPLACE to remove Scott. is it possible to delete all information on Scott and storage simultaneously using REGEXP_REPLACE...?


    Select REGEXP_REPLACE (dbms_metadata.get_ddl('TABLE','EMP'), '("Scott")', ", 1, 0, 'i') twice;


    result:

    CREATE TABLE 'EMP '.

    (SELECT 'EMPNO' NUMBER (4,0) NOT NULL,)

    'ENAME' VARCHAR2 (10),

    VARCHAR2 (9) "JOB."

    "MGR" NUMBER (4,0).

    "SAL" NUMBER (7.2).

    "DEPTNO" NUMBER (2.0)

    ) PCTFREE, PCTUSED, INITRANS 40 10 1 MAXTRANS 255 NOCOMPRESS SLAUGHTER

    TABLESPACE 'USERS '.


    I want to:


    CREATE TABLE 'EMP '.

    (SELECT 'EMPNO' NUMBER (4,0) NOT NULL,)

    'ENAME' VARCHAR2 (10),

    VARCHAR2 (9) "JOB."

    "MGR" NUMBER (4,0).

    "SAL" NUMBER (7.2).

    "DEPTNO" NUMBER (2.0)

    )

    Hello.

    In fact, it's a Japanese forum here.

    I'm sorry, English is not good for me...

    According to the reference,.

    DBMS_METADATA

    The description of the parameter called SEGMENT_ATTRIBUTES, it is written like this.

    > If TRUE , include clauses attributes segment in the DDL. If FALSE , omit them. Default value is TRUE .

    Before you SELECT it, it's OK if you run the following.

    exec DBMS_METADATA. SET_TRANSFORM_PARAM (DBMS_METADATA. False SESSION_TRANSFORM, 'SEGMENT_ATTRIBUTES',);

    I hope you find it informative.

  • Can satellite L300 - headphones and speakers simultaneously?

    I have a Satellite L300 with Self installed Windows XP (Realtek Sound Driver from Toshiba Web site 5.10.0.5559).
    Connect the headset turns off speakers. I want that speakers and headphones operating simultaneously. What can I do? Thank you very much for the help.

    Cordially H. Reinhold

    Nothing. Something like this is not possible. I'm sorry.

  • Read and write simultaneously 9375

    Hello

    I have a map of cDAQ DIO 9375 on a slot 4 chassis USB. My question is the card can be configured to perform simultaneous reading and writing? All channel and task VI DAQmx want to read or write. My goal is to be able to use a digital output to trigger a WEAR and use one of the digital inputs to read an output of the object to measure. I know that I can start and stop digital tasks to perform my test, but I was wondering if I am missing the mark in some way.

    See you soon,.

    Emach

    Sorry, I made a mistake in my post original (I blame my lunch to distract me) when I did believe you could do a task timed by the material and a demand.  You can either make on request of materially call GOLD a tasks tasks in one sense.  This means that if you want to DI and DO, you need to use two modules or on demand.

  • ASBL voice and data simultaneously

    Anyone know why we can not make a phone call and use data at the same time on the VZW network? I am able to do that with my 1st gen Moto X, so it seems just stupid my 2nd generation cannot do.

    I discovered this last week I was on the phone with my daughter and I tried searching movie times while talking to him. I thought there was something wrong with my phone until I did some quick research and noticed that it is the same for all the 2nd generation Moto x on VZW. I don't know if there is a problem with other providers.

    all this is part of the improved A.s.b.l. appeal have VOLTE 'coming soon'... a giant step in the wrong direction from what I hear the bike X 2014 is not the only phone to suffer from this "feature". The droid turbo also can not do. I heard a rumour nasty that even the Nexus 6 cannot, but that sounds not just because all the specs show the antennas in the unit.

    The X must wait for VZW to flip the switch and hope that it works as expected.

    The other weird thing is when I talked to a technician at bike he said that X was supposed to have simultaneous voice and data.

  • Digital and analog simultaneous inter channel delay

    I need to a simultaneous analog input 1 channel and 1 entered digital who intend to make possible acquisition of maximum speed. Of course I expect no delay channel inter if the two entries on the edge of clock sample even sampling. But this example shows unexpected behavior. Restart acquisition regularly shows different delays inter channel. I hope there is someone there to help out me. See the included example.

    I asked the support of National Instruments and they came with an adequate solution.

    Time t (0) stamp in the waveform is NOT the start time of the acquisition but it is the time the buffer is read.

    To demonstrate this applies the same "pulse train" to the two channels and t (0) all forms of wave at the same time of departure. Observe that the edges of both signals match exactly. Because a single channel is a digital input, we make the logic of levels of tension into account.

    Thanks to Henk Talsma
    National Instruments
    Engineering applications

  • J053ea HP Envy 17 - using the touchpad and keyboard simultaneously

    I just bought the laptop of HP Envy 17 in Windows 8.

    One problem I have is when running games such as Call of Duty, I need to be able to use the touchpad with the keyboard to control the game properly.  It seems that, once I have a key that is pressed, the computer does not accept any entrance of the touchpad until I release the key.

    Will there be an option in the Panel, maybe I need to change to enable the simultaneous entry of keyboard and the touchpad?

    Thank you.

    Hello

    This problem may be caused by a touchpad setting which is intended to avoid any accidental activation - for example if your Palm brush the touchpad when typing.

    You can change this as follows.

    Open windows control panel and on the top right, next to the display by: select "large icons".  In the new page layout, select the entry of Synaptics.

    The hardware/software version will depend on real option that you're looking for (see the example below), but it is usually called 'check' Palm or Smart Sense'-disable this function and apply the changes.

    Kind regards

    DP - K

  • OfficeJet 6700 Premium AiO: Copy and scan simultaneously

    Good day to all,

    I was wondering if my Aio Officejet 6700 Premium E supports simultaneously copying and scanning. As I need to have a paper copy of my report in my patientfile and I also want to do a backup on my hard drive digital camera.

    Thank you in advance for your time and wisdom.

    Greetings,

    Michael

    Sorry, no.  The 6700 Officejet cannot copy and scan in a single operation, you must run the original twice now, once for the copy and one for the scan.  You can consider scanning to a file on your computer, then print this file.  This would confirm the paper copy will match the scanned document and would take only a passage from the original by the document feeder.

  • Move text and formfield simultaneously

    Hello

    I created a form here, it's look like: text1 text - formfield1 - formfield2 - Text3

    Can I move/copy all formfields together simultaneously. Ditto for the text.

    What I want to do that I have to move/copy the formfields AND text together. It is important for me that the formfield and the text property does not change when I move/copy autour.

    It is posible?

    Using Acrobat Pro DC / win 10

    Kind regards... Peter

    No, it is not possible, unless they are also fields.

  • Bill and routing simultaneous Program Interface does not deal with component

    Hi all

    When executing a program Interface routing and simultaneous Bill, does not not the element component (section) of bom_inventory_comps_interface, he still see the flag as 1 process. where item (Header Item) billing is successfully completed... I tried with the option giving the sequence id component and package what still id is not the transformation component article...
    It is advisable to give bill sequence id, and sequence id of component in the array of interface uses the sequence of bom_inventory_component_s...

    I'll be very happy if I listen to you guys... Please help me solve this problem...

    My header Insert Stmt...

    INSERT INTO [email protected]_link_visma
    (assembly_item_id, organization_id,
    alternate_bom_designator, last_update_date,
    last_updated_by, creation_date, created_by,
    review, item_number, item_description,
    implementation_date, transaction_type,
    process_flag, assembly_type, batch_id
    )
    VALUES (l_inv_item_id, l_org_id,
    NULL, SYSDATE,
    1318, SYSDATE, 1318.
    l_revision, l_item_num, l_description,
    SYSDATE, 'CREATE ',.
    1, 1, 10003535
    );

    Element Insert stmt

    INSERT INTO [email protected]_link_visma
    (operation_seq_num, component_item_id,
    item_num, basis_type, component_quantity,
    auto_request_material, effectivity_date,
    disable_date, planning_factor,
    component_yield_factor,
    enforce_int_requirements,
    include_in_cost_rollup, wip_supply_type,
    supply_subinventory, supply_locator_id,
    check_atp, optionally,
    mutually_exclusive_options,
    low_quantity, high_quantity,
    so_basis, shipping_allowed,
    include_on_ship_docs, required_to_ship,
    required_for_revenue, component_remarks,
    transaction_type, process_flag,
    assembly_item_id, component_item_number,
    Batch_ID, component_sequence_id
    )
    VALUES (l_operation_seq, l_comp_item_id,
    cur2.item_sequence, l_basis, cur2.quantity,
    l_auto_request_mtls, cur2.from_date,
    cur2. To_date, cur2.planning_factor,
    cur2.yield_factor,
    l_enforce_int_requirements,
    l_include_in_cost_rollup, l_supply_type,
    l_supply_subinventory, NULL,
    l_check_atp, l_optional,
    l_mutually_exclusive_options,
    cur2.minimum_quantity, cur2.maximum_quantity,
    l_sale_order_basis, l_shippable_flag,
    l_include_on_ship_docs, l_required_to_ship,
    l_required_for_revenue, cur2.comments,
    'CREATE', 1,
    l_inv_item_id, l_comp_item_num,
    10003535, [email protected]_link_visma
    );

    For the subcomponent Insert Stmt

    INSERT INTO [email protected]_link_visma
    (substitute_component_id,
    substitute_item_quantity,
    assembly_item_id, component_item_id,
    operation_seq_num, organization_id,
    substitute_comp_number,
    component_item_number,
    assembly_item_number,
    transaction_type, process_flag,
    enforce_int_requirements,
    effectivity_date, component_sequence_id, batch_id
    )
    VALUES (l_sub_comp_item_id,
    cur3. Quantity,
    l_inv_item_id, l_comp_item_id,
    cur2.operation_sequence, l_org_id,
    l_sub_comp_item_num,
    l_comp_item_num,
    l_item_num,
    'CREATE', 1,
    l_enforce_int_requirements,
    SYSDATE, [email protected]_link_visma, 10003535
    );

    Thank you
    Raman Sharma

    Published by: 929841 on May 4, 2012 12:28

    Published by: 929841 on May 4, 2012 02:58

    If you encounter a problem creating the substitute, I was suggesting that you can try to create the list first, then create the substitute as a separate update for the registration of the BOM component.

    Sandeep Gandhi

  • Delete the song from iTunes and record simultaneously?

    Hi all

    I have a question. 2 years ago I think I duplicated my entire library by accident. I spent a whole while removing the hard disk songs that were double, but it is still like 4400 songs left.
    Is there a way to delete a song on iTunes and at the same time from the hard drive also?

    If so, I'd REALLY know haha.

    Thank you in advance,

    Gino

    If the track that is being removed is located in the iTunes Media folder, then iTunes should offer to recycle. If the files are outside the folder of media then iTunes just removes the reference. See KillSelectedFiles for a script that can delete the underlying files regardless of the situation, but it might be better to use DeDuper to clean duplicates in case you managed to create multiple links to the same file. In both cases, the files must be attached to the library before they can be cleaned.

    TT2

  • Any benefit to have the Wifi and Ethernet simultaneously?

    There is better performance, have Wifi and Ethernet switched on at the same time?

    It seems strange that I can have both at the same time.

    Outside access to printers wireless enabled (which is not relevant to me), I would like to know if there is an advantage to internet high speed.

    No,

Maybe you are looking for