Similar Questions

• I can't find instructions on setting up or using the keyboard Microsoft Wireless Comfort 1. 0a.

  I can't find instructions on setting up or using the keyboard Microsoft Wireless Comfort 1. 0a.  I GOOGLED it but the only reference I find tells me to go to the download page on the Microsoft Web site for this product.  I went to this site and the only thing it is limited warranty info and Product Guide.  I downloaded the Product Guide, but it only covers the basic information like it do not immerse in water, do not take part and the various regulations of the FCC about the product.  There is no info in this guide on how to configure or use the keyboard AT ALL.  Guidance on how to use this product is probably somewhere?

  The dongle is not plug it into the keyboard, it plugs into the USB port on the computer.  Wireless keyboards is not related to them - think of that.  :-)

  If you are missing parts to the keyboard, I would just buy a new one.  You can buy wired keyboards for as little as $4 these days, wireless are a little more expensive of course.  Personally, I find the wireless keyboards to be a pain because the batteries always come out in one in-opportune times.  YMMV

  Good luck.

• When I scroll with the wheel of the mouse Microsoft Wireless Mobile Mouse, it jumps instead of sliding to the bottom of the page. It ignores even the large amounts. This can be solved? Rose

  When I scroll with the wheel of the mouse Microsoft Wireless Mobile Mouse, it jumps instead of sliding to the bottom of the page.  It ignores even the large amounts.  This can be solved? Rose

  Hi Rose,
   
  The problem occurs on specific applications?
   
  This can be for one of the following reasons:
  1. bad mouse is selected in the IntelliPoint software.
  2. conflict with other mouse or pointer (non-Microsoft) software.
  3. problem with IntelliPoint software or drivers.
  4 application does not correctly recognize scrolling the mouse messages.
   
  I suggest for the link and follow the steps in the KB article:
  The problems with the mouse button or scroll the parameters
  http://support.Microsoft.com/kb/303091
  Note: Put the computer to normal mode after the troubleshooting in clean boot mode.
   
  Hope this solves the problem. If the problem persists, you can write to us and we will be happy to help you further.

• I bought a Microsoft wireless router today, but it did not come with a cd. What should I do?

  I bought at the flea market, so obviously did not expect, but when I went on the site, looking for a way to get a CD, nothing came. Anyone know how I could do to get one?

  Hello

  · What is the model number of the router?

  You can check the link below: how to download updates that include drivers and hotfixes from the Windows Update Catalog: http://support.microsoft.com/kb/323166

• connect the dsi to wireless router

  I can't connect dsi to wireless router, getting the gray padlock that tells me to take the WEP security, I don't know how to do, or what it means in fact!
  Thanks for your time

  Hi Juliehoskin,

  Welcome to Microsoft Windows Vista Forums.

  This error message is usually caused by problems with WEP key.

  Change the wireless security settings is normally done within the parameters of security wireless router page. For more information on how to access this part of your router, you can get your information from router on the internet using your favorite search engine or consult the router's manual or contact the manufacturer of the router for more help.

  Diana

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Cannot connect to the nintendo wii wireless router

  Original title: WiFi

  IM problems to connect my nintendo wii to my wireless router, my laptop seems to connect very well, but I can't connect to the wii, for some reason I can't find the router or connection Wireless on my pc to try and solve the problems there. im not all that computer savvy so any help will be greatly appreciated thanks.

  Hello
  You try to connect the nintendo Wii to router or laptop?
  
  Try this:

  1. click on the "Wii" in the lower left corner of the main screen of the Wii console.

  2. go into 'Wii settings' and 'Internet '.

  3. click 'Connection settings', and then select a connection that marked 'None '.

  4. Select "Wireless connection" and "Access Point search."

  5. choose what access point to connect to, then click on 'OK '.

  Manual installation

  1. click on the "Wii" in the lower left corner of the main screen of the Wii console.

  2. go into 'Wii settings' and 'Internet '. Click on "Connection settings" and choose an open connection that marked 'None '.

  3. choose "Wireless connection" and "Manual Configuration".

  4. Enter the SSID of your router. Click on the blue arrow to the right of the box to move to the next screen.

  5. Enter the security information. If you don't use WEP or WPA security, go directly to the next screen.

  6 choose whether or not to auto-obtenir address IP and DNS information. If you choose auto-obtenir, go to "Advanced settings" and enter your information of intellectual property.

  7. the MTU value. Most users leave this field empty, but it can be set to 1500 if you have connection problems.

  8. choose 'Save' and 'OK '. Select 'OK' to test the connection.

  If this does not work, contact nintendo for best support.

  Online connection support

  http://www.Nintendo.com/consumer/systems/Wii/en_na/online.jsp

  Troubleshooting wireless router

  http://www.Nintendo.com/consumer/systems/Wii/en_na/onlineWirelessRouterTroubleshooting.jsp

  Aziz Nadeem - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• What is the unit of wireless client lease?

  Hi all:

  I that would like to set up the wireless client lease time. 0 means a day.

  I want to set for 5 days.

  What is the unit for?

  Best regards

  Chen min

  1. you cannot change the term of the lease for the wireless clients only. It's for all DHCP clients, whether wired or wireless.

  2. what router?

  3. it is said:

  Client lease time: minutes (0 means a day)

  The unit is "minutes". He's not say this on your router?

• What are the best bluetooth wireless speakers to use with the iMac

  I have the desktop iMac 27 in. on which I have my iTunes.  I want to buy some speakers for the room which will connect to the iMac's wireless.  Someone at - it a system like this to recommend.  I looked the Sonos speakers that run through wi - fy - but don't know if that's what I need.  Any input would be appreciated.

  Speakers are a very personal choice. Better would be those that you love the most. Which may be different from someone else.

  Excellent fact Bose pregnant BT that work with your iMac, I like them a bit. However, some say that they can be too bass-ey.

  You must listen to the speakers to find the ones you want to use.

  Try looking at Bose or Harman Kardon to start. Any pregnant BT should work with your iMac

  .

• 4600 pro connects to the Linksys WAG354 Wireless router!

  Hello

  I have a Toshiba Satellite Pro 4600 with internal wireless card. I'm trying to connect to my Linksys WAG354 wireless router. The laptop seems to connect but only get a connection status ' Limited or no connectivity "note computer says it has problem because the network has not assigned a network address of the computer.

  I called Linksys, but the call center do not have a lot of help! They said that I should update the driver for the Toshiba wireless... I did that, but still the same problem.

  I am running windows XP. I have two other laptops connected to the router WAG354 and they work fine.

  Any advice would be much appreciated.

  Hello

  I agree with Michael. I think that some false setting is responsible for this. If your network is visible for the laptop, the features of the card are OK and the problem parameters.

• What is the nodes of wireless sensor network measuring to measure: 4-20mA, 0 - 10V and Pt100?

  I'm looking for a wireless sensor node to measure:

  -4-20mA signal

  Signal - 0 - 10V

  -Pt100 signal.

  What is the node position OR better.

  Best regards

  Alioscia

  Hi alioscia,.

  For all of these measures, you probably better off using an NI WSN-3226 if you want to measure all parameters in one place. You can use a shunt resistor and apply the Ohm's law to calculate the measure 4-20mA.

  See you soon,.

  Brian has

  R & D Product Support Engineer | WSN/network DAQ/University

  National Instruments

• Upgrade to the new (different) wireless router

  If I install/upgrade to a new wireless router, is there any software (Linksys or other) I need to uninstall first?

  Thank you.

  Ron

  bigdave240

  Thanks for the reply, it sounds good.

  Ron

• The question of the Access Point wireless router

  I am considered to be an amateur when there are routers so patient with me. I have a wireless router in my office and two workstations are hardlined (ethernet cable-joint) to the router. Then, in the living room, I have 3 devices (Xbox, BlueRay, directTV) I want on the network. Rather than running three office ethernet cables, I expect to have some sort of (reverse hotspot) where a device could hop on the wireless router and the signal I inflexible at these three devices. Not sure if this would require an Access Point or another wireless router?

  Any thoughts would be appreciated.

  -J

  I suggest that you try to find something on WET54GS5... is a bridge with 5 ports wireless if I'm not mistaken... but since it's under Cisco Small Business, I suggest you could ask more about it here

  Cisco Small Business support community

  Or you can see WET54G and buy a separate so you switch can accommodate other devices
  

• New S10 could not connect to the Netgear WGR641v8 wireless router

  All,

  Really frustrated with the nine s10 that I received this afternoon. All my other laptops are able to connect to the router Netgear wireless fine but this one. I could connect the s10 of unsecured networks of neighbors very well, so it doesn't seem to be a hardware problem. More compatibility issue with built in network card wireless Broadcom and Netgear chipset. I was able to connect to the local network with thin cable.

  Anyone have any better ideas? I updated latest firmware for the router. I think also got the latest version of the driver for the adapter. Where is the problem? I tried setting secured or unsecured (no password) for the router, no luck. I'm scratching my head right now.

  This is the first time ever, I have a new laptop failed on me. I contacted the customer service and the guy had no idea.

  Anyway, thanks in advance.

  The WGR641v8 has enabled ' Access List' (it limits the devices that can connect to only those network manually allow)?

  I have a Netgear DG834G or something like and a S12 (I think it was the same as the S10 (but not sure) WiFi adapter), once I'd added it is MAC to my list of access routers, I was able to connect without any problem (actually I use said WiFi connection right now).

  [edit] Also, check what encryption protocol you should use and what windows uses - he can't pick up the correct one to use and if the connection is a fail for this reason. [/ edit]

• Problem with the mode 'sleep' and the new Microsoft Wireless Comfort 5000 keyboard and mouse installation

  I just installed a mouse wireless Comfort keyboard 5000, & computer seems to unfold in mode 'sleep'. How can I reactivate it without turning on the system turn off/on?

  Thanks to anyone who can help me find my sanity!

  Hi Shesarock,

  1 - is the computer going mode to "sleep" after the installation of the device to the computer or is unable to put the computer in standby mode?

  2. you are unable to get the computer out of fashion 'sleep'?

  Refer to the article below and check if it helps.

  The problems of wake the computer from sleep mode

  http://support.Microsoft.com/kb/266283

  The screen saver does not start after the installation of a wireless pointing device

  http://support.Microsoft.com/kb/913405

• The 5 GHz wireless router connection

  I have 2 laptops (Inspiron 1525 and 1545) and I was wondering if I can connect to my dual band 5 GHZ router with this?  I don't see the SSID in my area wireless on my computer.

  My laptop are compatible with a connection to 5 GHz?  If not, is there an adapter for it, how much, and it is easy to do?

  Alex,

  A wireless USB adapter 5.0 GHz network is the fastest and easiest way. You can buy a card to install the appliance. The adapter inside the probable has 2 sons

  Rick