D drive not available after abilities for win 7
I installed windows 7 after 2 formatting hard drives and reinstalling windows xp, after the installation of the second drive appears as drive C 01 and not the D drive, I can't access D drive.
Your problem has nothing to do with Windows Update (compared to the upgrade of Windows). Post here instead, please: http://social.answers.microsoft.com/Forums/en-US/w7hardware/threads ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft
My in-laws improved to win 10 of Win 7 on their s5220f of HP. Given that upgrade the CD/dvd drive is no longer working or is recogniozed by the computer. It is not in the list of devices in the Device Manager either. When you insert a disc turns but obliously that nothing happens, and the drive is not visible in the file Explorer window.
Thanks for any help you can provide.
Here's what I found the solution:
It worked to fix my Windows 10 system. Note This mentions 32 bits, but it worked for my Windows 64-bit 10. This was taken from http://support.hp.com/us-en/document/c03280768
Resolution 5: Create a registry subkey
Note to use this method, you must be logged on to Windows as an administrator. If you need help, check that you are an administrator, go to http://support.microsoft.com/gp/admin
Important follow the steps described in this section carefully. Serious problems can occur if you modify the registry incorrectly. Before you edit, back up the registry to restore in case of problems.
To create the registry subkey, follow these steps:
Press the Windows logo key + R to open the run. (or right click on the windows down icon to the left)
Type regedit in the run box, and then press ENTER. If you are prompted for an administrator password or a confirmation, type the password, or click on allow
In the navigation pane, locate the following registry subkey:
Right-click atapi, point to new, and then click key.
Type Controller0 and press ENTER.
Right-click Controller0, point to new, and then click DWORD(32-bit) value.
Type EnumDevice1 and press ENTER.
Right-click EnumDevice1, click on change...
Type 1 in the value data box, and then click OK.
Exit Registry Editor.
Restart the computer
PS c. 2015.0.1 on my iMac OS X 10.11.4 (el Capitan), I performed an action that ends by saving in a subfolder under the active folder running immediately. When I tried to execute the file. Automate with this action, I received an error message "drive not available '. Tried with the two saving options, "save and close" and "save to [folder location]".
Could you please show me what can be the cause of this and how to fix it.
The image processor Script can include actions that save you in the treatment of what an action simple single step is all that is necessary for a resolution of the image.
Image size resample not checked the setting resolution to 72. Not a single pixel will change the document resolution setting will change from its current location at 72 DPI.
Canvas size add size or reduce the size of the document canvas. If it is a background layer its size will change to the new size of the canvas, added canvas areas will have a pixel color adds the and increase in the size of background layers one or the reduction of the background will be cropped to the new pixels size size of the canvas. A background layer does not support the transparency and its always the size of the size of the canvas to the current document. Other sizes of layer will not change when you change a document canvas size. However the new canvas size can reveal that pixels where the old canvas size cut.
Your original append said the action was save files to a folder is the folder that is not available or you have to check the batch option to substitute recorded save as steps?
Running PS c. 2015.0.1 on my iMac OS X 10.11.4 (el Capitan), I performed an action that ends by saving in a subfolder
No network adapter driver is available after reinstalling Windows Vista installation disk... Unable to connect to the network
Know what type of network card you have and download the drivers of its supplier.
It doesn't matter what it is always a good idea before re-install/upgrade to log on to the computer support page, download independent drivers from there and put them on a flash drive.
Jack-MVP Windows Networking. WWW.EZLAN.NET
Design Premium CS5 does not install after download for Mac. He says that the installer is corrupted. It was downloaded from the other downloads page repeatedly. Is there another way to download this file?
When you ask a question you will need to provide some basic information
-Exactly which version of the operating system?
IF El Capitan Mac read below
CS6 and previous programs have not been tested and will not be updated to run on Mac El Capitan
-which means you are trying to use CS6 and earlier at YOUR risk of having problems
-You can get CS6 and previous programs to install and run, or you can not (some do, some don't)
Maybe it's a fake because of Mac El Capitan and OLD programs error
This information is a MUST to install old programs on Mac El Capitan
Install CS5 on Mac 10.11 https://forums.adobe.com/thread/2003455 can help (also for others than CS5)
-also a TEMPORARY security change https://forums.adobe.com/thread/2039319
-the guardian https://support.apple.com/en-au/HT202491
I think I got this, just need confirmation, before I was going to HP.com to find udpated pilots, then site Web HP said if computers purchased after August 2013 have been tested, I think you could get the updates via the HP with WIN10 site. My pc model was purchased in February 2013, it seems now that I have WIN10 there is no drivers for me page to go it says that I need to go to the updates of Windows. Before I upgraded to 10, I was 8, and I had full access to the drivers download through HP.com page. However, I think I understand now, I had a problem with the Norton Removal Tool, after using it, it makes my pilot biometric and disabled the Windows Hello to WIN10 - the reader of fingerprints for a connection. The pilot appeared to be corrupted and I needed to just reinstall. I finally found an old forum via HP where someone has had the same problem that I did and they are found to include a link for the driver, and it worked for my model of laptop and solved the problem. After some tests, I uninstalled the driver and learned at that time, after the driver is uninstalled, I can go to Windows Update and it will search and find the driver that I uninstalled and offer me the download to reinstall. That's cool. So, I understand now that even now if the drivers are not available for my model via HP.com, I can now just do a search through Windows Update and it will fix the problem, only after that I uninstalled it through Control Panel, Device Manager, once I uninstalled, restarted the computer, then did the updates of Windows It downloaded the driver, like when I went to the Control Panel, Device Manager, I saw the biometric driver in good working condition. This is the case now with who need driver updates / reinstall? (Note: to update the drivers, I know too much, you can go to control panel, Manager of devices, and then click the driver and select Update driver software.)
Hi @MVP1 ,
Welcome to the Forums of HP Support! I have, I understand that you are concerned about Windows 10 updtaes. I'll be happy to help you.
You are right. Microsoft took the drivers for this computer. All updates will now come from Microsoft.
If you need help, let me know and I will gladly make all that I can to help you.
Please let me know if that solves the problem by marking this post as "accept as a Solution.
To simply say thank you, click the Thumbs up below!
My laptop Satellite C850-A797 upgraded to windows 10 last week and Bluetooth driver not working since upgrade,
I installed the battery Bluetooth for windows ver.9 but it also does not work.
can someone help me with this please?
C850 satellite is not listed as a book of 10 Windows compatible.
This means that Win 10 drivers are not available for this unit.
In any case, I recommend you to go to Device Manager and remove / remove Bluetooth all the partners of the devices and entries.
In the view of mark tab also the option Show hidden devices in order to get the big picture complete.
Now after reboot, win 10 must search for removed devices and drivers missing.
I hope this could solve your problem of BT.
I'm unable to send the file with my laptop running windows 7 Ultimate x 64 on my phone (sony xperia with android os p)
I can send the file to my phone to laptop and my laptop to another device and any other device for laptop .when I have associated my phone to laptop, I get notification this device driver is not available. my windows is updated and I installed the version lastes my bluetooth of the BT and my laptop even factory plant i tride to update my BT driver automatically from the internet but it doesn't work and I still have this problem please help me how can I solve this problem thank
This error can occur if you do not have an installed device driver or if you have an obsolete device for your Bluetooth device driver
We can refer to the article and check if it helps.
Try to re - connect the phone and try to install PC companion Sony support and check if it helps.
Hope the helps of information.
This is the second time that this has happened. Customer support had me to delete a file in the library, but I don't remember which file. Can someone help me?
OK, I had to go to go to the folder ~ / Library, preferences, then replace 'Adobe Photoshop CC 2014 "by 'Adobe Photoshop CC 2014 Old parameters' settings '.
That fixed it.
P.S. Not scratch disk is full - it says disc not available
Windows has recently completed an automatic update on a Tecra S3 equipped with a 60 GB HARD drive SATA.
After the reboot required for updaates windows generates a BSOD.
I've traced the error and found that the system can not find the hard drive.
Even when I use the XP cd and restore/repair console without a hard drive is located.
When I check the BIOS hard drive is there.
I removed the hard drive and used an external case and determined that the hard drive works fine.
Tecra S3 supports RAID.
In order to install Win XP RAID driver is needed!
The RAID driver can be found on the European driver Toshiba page.
It s a v 1.01.0005 for Win XP.
You can include the RAID driver using nLite. This free tool allows you to include the RAID driver in the Win XP disc.
Google for nLite for more details.
I use a Plantronics M50 bluetooth headset on my mobile, Skype etc. All troubleshooting yesterday (had a problem with the microphone volume is very low) I followed a few steps of an article if found on a Microsoft forum, telling me to uninstall the driver, as well as to restart my laptop (Win7 64 bit) would recognize and re - install the driver.
In Device Manager, I right-click on the M50 (under audio, video and game controllers) device and chose to uninstall (as prescribed in the MS article). Here's where I shot myself in the foot; I ticked the box "Delete the driver for this device" (thinking that Win7 would get a fresh driver from Windows Update to reboot)
After the reboot, my laptop started to reinstal the driver device, but for "Bluetooth device" reports "no driver not found"
I myself tried in vain things:
- tried to find the driver sur.com, but isn't available (plug-and-play)
- installed software (incl. Plantronics Control Panel) Plantronics package
- I tried Windows Update
- installed Microsoft Windows Mobile Device Center 6.1 Driver (as advised on various sites to set "Bluetooth Peripheral Device" reports questions 'no driver found'
At the hope that someone had a suggestion for what else to try, or maybe how to find out what that exactly that I deleted by choosing 'delete the driver for this device '.
Thanks in advance!
Just in case it helps, I noticed that the following folder is created at the time of uninstal and reinstal, containing calisto.inf, calisto. PNF and Calisto.cat
I decided to use Sytem Restore to restore my system to before I uninstalled the driver. There are a few downsides to this, but so far the benefits outweigh them.
I have correctly installed and configured the Server Update 2 Oracle UCS Sun7. Calendar works (if I don't reboot the server).
However, when I reboot the server, calendar service is not available.
Important information for when I installed Oracle UCS Dim 7 update 2 by following the installation guide:
I noticed when browsing through files, there is already a folder "dsee6" for the Linux Oracle I started from. After the installation of the example for the Oracle Linux 5 with GlassFish install, I had to download a new directory server. By following the instructions on page 7 of the listed installation guide above, I did another folder "dsee7". I wonder if I would have never downloaded this new directory server by following the instructions on page 6 "obtain software". In fact, the installation guide does not mention where to find the directory server, so I went to the site of delivery and figured it out myself. in any case, in the section 'Installing and configuring directory server', #3, I was instructed to "mv dsee7/opt/sun/directory. In this folder, / opt/sun/directory/bin, there is '. '. "/ dsadmin" utility that can be run. This serves to do many things with the directory server, including start-up. This is how I started it:
. / create/var/opt/sun/directory/dsins1 dsadm
. / dsconf create suffix '0 = isp.
Also, I downloaded the delivery directory server - Oracle Directory Server Enterprise Edition 11 GR 1 material Patch Set 1 for Linux x 86-64
Then, I found myself running to implement:
. / dsccsetup ads - create
. / dsccsetup war-file-create
$. / dsccsetup cocoa-reg
. / dsccsetup State
Then, it seemed that dcss agent is registered in the cocoa.
So, if we pass to come to page 9 of the installation, "Preparation of the directory" guide, I ran this and prepared the directory. After installation is finished, I could restart the server directory without any problems, as long as I do not restart the machine. I would like to restart the server directory as follows:
. / dsadmin stop-domain domain1
. / dsadmin start-domain domain1
However, if I rebooted the machine, I could always start and stop the server directory as shown. But the calendar Services were not available.
The only reason I question this LDAP server that can be the cause of this is because at one point, I had configured the services to run at startup. I followed these instructions:
I use a VMSphere client to host this set upwards. So, given that this point the configuration of services at startup, I rode hanging at the rear so that services are more fixed upward to run at startup. But when they were, and I restarted the machine, I could see 389 ldap errors in all directions. So, which drive me to roll my snapshot in effort to try to correct the ldap errors. I no longer get LDAP errors as I drove my instant return. But, as I said, I have no more services, including LDAP, to start Protocol started as shown in the above link that tells us how.
After restarting, I run these commands to get the server up and running:
Start the GlassFish server:
. / startserv
Web start (mail server I think):
. / Start-msg
Start LDAP (directory server)
. / dsadm start/var/opt/sun/directory/dsins1
. / mysqld start
All these commands complete without problem. I can connect on the web of convergence, I can hit the Managing Director, I can connect to the GlassFish administration console, and I can see my calendar folder when I hit him in the web (http://myServer.com/davserver/dav/home/userName/calendar/).
So, in summary, I was wondering if anyone knows if it assumed that second directory server is causing problems since I started with Oracle Linux 5 and Oracle Linux 5 seems to have the dsee6 file already installed with it. Would be - why my calendar services do not start after reboot, but work before the reboot?
(Also, all my messages to keep deleted.) Can someone please send me an email if someone Oracle is deleting my messages and tell me why they are removed? )
Published by: ntfytim16 on March 5, 2012 07:41
Some of my steps were unserviceable. Cleaned them is easier to understand.
You stop/start the GlassFish server container:
I have problem with audio driver Toshiba Satellite L755-M1M3 after upgrade to win 10, the sound does not normally work in YouTube or Facebook even when I play the video files from my computer it is dug into the sound or noise goes, I update the driver but not help, can you help me please, I have Toshiba backup files how can I restore it?
Inability of Toshiba to make the solution, always shocks me. !!! ???
Occasionally, when my P305D-S8828 wakes from sleep the wireless card is not installed. So far a reboot solves this problem, but I need to be available after sleep. I'm sure I'm in the last laps of Toshiba, but should I look on the site of MFG. card driver updates.
It's good idea with the WIFI driver update but I have checked support US the site and unfortunately there is no updates.
What version of BIOS has your laptop?
Hi, I have a Satellite L300D-11V model pslc0e and have upgraded to 32 bit Windows7 ultimate. I downloaded all the necessary drivers on the toshiba site, but he acknowledges that he has a cd/dvd drive!
Can I put any disk in, but it will not load up or even acknowledge that the car exists!
Please, read here:
This is for Vista but works for win 7 too. I checked it myself before.
Maybe you are looking for
Hello I hope you can help and I don't know if I'm worried for nothing, but it began to annoy me now. First of all the details of my network are as follows: Cable modem connection cable-> Cat 6 to airport extreme (new model height) which acts as a rou
Hello. I have the Pavilion dv6-6b19sv. IM really happy with this laptop (except the extremely noisy cpu fan and dvd rom). My laptop has an AMD Radeon HD 6700 M. I thought that if I can change it with a new and better card. Is this possible? If Yes, c
Hello world I have a small question for you. My LAN has a main router that is configured on the linux system. And I have 2 WRT54G routers which should be the wireless access point. First question is therefore: Is it possible to set up the routers on
Hello I am running ubuntu 14.04 on my computer hp laptop 1000-1b02au. But it is really slow. I don't think it's an OS problem. Even if this is the case, I can't switch to windows. In my view, its processor is really slow (1.4 GHz double heart). Can y
According to the title of the thread, can someone tell me if the TMS supports the SQL feature "always there"? I don't know much, but our DB guys want to know.