D drive not present in 'computer '.

Similar Questions

• External hard drive not in my computer

  Hello

  I have a question on my external hard drive. It's a drive hard 2.5 "of Toshiba (1 GB).
  I used it already for a long time on my laptop (WINDOWS VISTA) and it worked perfectly until today. I plugged in my hard drive as
  usual and it does not appear on my computer. I looked on the internet and found something about research
  Start - Run diskmgmt.msc, (uitvoeren) - so I tried.
  He showed the next thing on my HARD drive:
  Disc 1
  Unknown
  931,51 GB
  Not initialated (niet geinitialiseerd)
  Unassigned (niet toegewezen)

  I didn't know what to do, so I tried some things. I pressed the right mouse button and he said "initialize disk". I pressed on it and he gave me 2 choices: MBR or GPT.
  I tried both, but they both said: data error: Ketal redunatiecontrole.
  So, I tried something different. I pressed the right button of my mouse again but this time on the black bar beside the disc information. He said "New simple volume", but I dared not go further because I didn't know if I would lose my data or not, if I would. Also, I didn't know how big the new volume should be.

  He also said that the device works properly when I press 'characteristics '.

  I don't know what to do now, and also I don't want my files to be deleted.

  Can someone help me?

  (Sorry for my bad English, if I write it in Dutch because you do not understand my problem, please tell me ;)))

  Can you please test it on another computer just to be sure, the same thing happens again?

  When you connect you hear beep sounds when the new device is connected?

• External hard drive not seen on computer

  When I plug my external hard drive on my laptop, it does not show. Entered the command prompt and you can see it o.k.Should it have a letter designation and if yes, how can I do this on Windows 7 Home Premium.

  The drive is detected in disk management?

  The drive works on another PC?

  Is there traces of yellow warning in Device Manager?

• Problem with searching for computer on the network. Error: "unable to browse the network. The network is not present or not started. »

  Hello

  I have two NICs connected to my computer for creating hotspot Wifi network. I created successively network Wi - Fi hotspot. But after that when I tried to connect to my local network computers
  My network places-> network-> network Microsoft Windows. I get this error "unable to browse the network. The network is not present or not started. »
  Thank you.

  I am able to fix this by myself.

  The solution that worked for me:
  Run as administrator command prompt.
  Insert the Windows XP Sp3 CD in disc drive (I have xp sp3 installed)
  
  At the command prompt, type in
  
  
  SFC/SCANNOW
  
  
  
  

• A floppy drive is in my computer when no floppy drive is present in the system

  Hello

  My system is as follows:

  PC x 64 ACPI
  Vista Home Premium 64 - bit SP2
  M3N78 Pro motherboard ASUS
  2 x AMD Athlon 64 x 2 processor Dual Core 6400 +.
  4 GB OF RAM
  2 x 500 GB Seagate Barracuda Hard Drives (ST3500820AS)
  NVIDIA GeForce 9800 GT graphics card

  A recent power outage at left me with several problems when restarting my pc. It was notably BIOS reorganize my boot sequence so that my drive C and drive D swapped places, ASUS Express Gate allowing itself when it had previously been disabled and apparently adding a floppy to my system drive (visible in my computer and Device Manager) when none are physically present. Some alterations in the Bios allowed me to change my boot back to its original and correct order sequence and disable ASUS Express Gate, and therefore no longer issues. However, I had absolutely no chance to get rid of the ghost floppy. My only solution is to disable the floppy drive controller in Device Manager (I don't know if it was present before installing SP2 or the power cut or not) in order to remove the entry from the workstation. However, this means that it is always visible as an inactive device in Device Manager. If I try to uninstall both the floppy drive and the controller of the device, Vista Manager merely note them appropriate drivers and kindly re - install them for me, placing the drive in my computer ghost floppy drive and Device Manager. Short of reformatting or the upgrade to Windows 7 to see if I can fix this bug annoying, I'm at a loss as to how to proceed. Any help much appreciated.

  See you soon

  Jon

  If you have even disabled the floppy controller in the BIOS?
  In addition, to replace your CMOS battery (typically a CR2032 coin cell and available everywhere.)  That's why your BIOS to reset the values by default when the power is out - his battery died.
  That won't help with this particular problem right now "However, it will prevent it from happening again.

  HTH,
  Chris

  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• CD ROM not showing drive is not in my computer.

  My CD Rom drive not displayed in my computer. However, it is displayed in the Device Manager. I can't play any CD at all. The reader has to be able to run to it because it opens and, of course, present in the Device Manager. I already tried to reinstall the driver for him and it did not work. I'd appreciate any help, thank you.

  I opened my computer and a cable is not attached to him. My apologies for the error. Works like a charm now. :)

• Satellite Pro U300 - CD DRIVE NOT RECOGNIZED IN MY COMPUTER

  My cd/dvd drive is no longer recognized in my computer. It seems to be working, opens and closes and seeing little flashes when I put in a disc. but the disc does not load and the hard drive is not available in 'computer '.

  Ive tried the Device Manager. He comes in there, and ive done the scan for hardware changes and its still not to come. Ive also tried the microsoft help forum, and their suggestion didn't help either.

  Any ideas?

  > Ive tried Device Manager. He comes in there, and ive done the scan for hardware changes and its still not to come.
  Have you checked if the drive is listed in the BIOS?
  Check this please.

  I thought is might be only a registry key problem, but if the drive is not listed in Device Manager, if the BIOS does not recognize the CD/DVD drive, then a hardware malfunction could be possible

• Satellite M40: HARD drive not working after laptop computer trasported turned upside down

  My Satellite M40 is facing a strange problem: whenever I have transport (for example, in the trunk of my car) backwards instead of in his natural position or vertically, after the transport, the HD does not work for a few hours. The BIOS does not see the HD because it is not present at all. After a few hours of rest, without moving, if you try to turn on the PC again, the HD magically comes to work again backwards.

  My HD is made with soda water? :)

  Talk seriously... What do you think it is?

  Hi franz

  Not easy to say what it is, or why it happens. Maybe it? s a bad connection of the HARD disk.
  I guess that this happens because of the agitation in the car.
  Well, I don? don't know if it helps but you can try to check the connection of the HARD disk.
  The second possibility to use another HARD disk. It might be because there is something wrong with the HARD drive.

• Hard drive replacement, windows support, media does not support this computer?

  Laptop HP G72 M #-C55DX, I replaced my hard drive with the same OEM, 4 recovery disks made when I bought the laptop new, replaced the hard drive, run startup test, memory and hard drive OK, insert #1 recovery disk, windows loads, then get the system recovery media does not support this computer. you are not able to restore the system with the media. I have windows 7 Premium I don't know what to do next. Thanks for the help. Frank

  My recovery disks that I had at the beginning are bad. Has bought the HP boot disks. up & running, thanks Frank

• NI LabVIEW driver for the SRS DS345 function generator generates error "(Hex 0xBFFF0011) insufficient location information or the device or resource is not present in the system."

  Hello

  We have a generator function SRS DS345.

  I just downloaded the driver NOR for the instrument on http://sine.ni.com/apps/utf8/niid_web_display.download_page?p_id_guid=E3B19B3E9149659CE034080020E748....

  After installation, the DS345 appears in MAX, and I can well communicate with him.

  However, if I run the srds345 to Started.vi, I get an error "location information insufficient (Hex 0xBFFF0011) or the device or resource is not present in the system" from initialize it with Options.vi srds345 sub - vi.

  The only change I did Exchange address GPIB 14 to 19, which is our function generator GPIB address. In addition, the

  Functions of SRS DS345 generator of function palette is empty, even after you restart LabVIEW (see attachment). I'm using LabVIEW 8.5.1.

  Your help in resolving this issue is appreciated. Thank you.

  Best regards

  Peter

  Have you installed the driver from LabVIEW or copied directly from inst.lib?

  The first is easier, and you don't have to restart LV more...

  Error in a not filled gpib address points. I have not checked if this driver has a resource name visa or a string of gpib address old but in the first case, try the little triangle on the right at the slect address instead of by hand.

• After new XP installed the computer sees my old CD Drive not my new DVD drive

  After new XP installed the computer sees my old CD Drive not my new DVD player.   My newest DVD burner was in the computer before I did the reformat and install again, but for some reason any my old CD player shows. He is no longer in the machine!

  Yes, I did what the measurements LITEON told me to do and I work like a dream! I went to do computer right click, click on manage, click on Device Manager, click on CD-ROM/DVD-ROM, double on this box, click on DVD region, mine had an empty box, I sailed to USA clicked OK, did a restart AND IT WORKS LIKE a DREAM!     I hope that the foregoing will help someone else!     Thanks for your time!

  Carrmas dad

• A yellow "!" box-tcp/ip protocol driver - this device is not present, is not working properly or is not all its drivers installed. (Code 24)

  TCP/IP protocol driver problem

  A yellow "!" box-i.m running windows xp professional, tcp/ip protocol driver service pack3(32bit), when i open hidden under drivers not Plug-and-Play, on the general tab of properties I receive, this device is not present, is not working properly, or does not have all its drivers installed. (Code 24) when I hit the Start button I get, (the system encountered the following error trying to start the service) "the specified driver is invalid" this error prevents me access to internet please help, unfortunately I n, have a cd of xp pro.installation. but I have a dell xp home edition reinstallation cd, any help would be appreciated.

  Imran, sorry for not having a back earlier, thanks for your reply, I got an installation cd and a clean installed which sort the problem.

  Kind regards

  dermotk

• My 3rd Windows 7 computer is unable to access the computers on the network. "Unable to browse the network", or "the network is not present or not started.

  3 computers, 2 XP, 3 windows 7.  The network is wired and wireless Ethernet.  Wired windows 7 computer can see xp wireless desktop.  no computer can see 3rd xp professional running on the wired computer.  Third computer can acess internet through router wireless, but when accessing NETWORK/MICROSOFT WINDOWS NETWORK PLACES/SET, a message comes back with "Unable to browse the network", "the network is not present or not started.  I can ping other computers.  I ran home and small office set up several times.  The network is protected by Norton Inernet Security.  He can see all computers in the group in its Panel of network security plan.  This system worked to a point.
  I'd appreciate any help you can provide.

  original title: unable to browse the network.

  All computers must be on a working group to see and access on the same network otherswise, you won't have access to each other.

  Pls check your computers under workinggroup (domain name)

  Check if your firewall is not blocking.

• When I share HP LaserJet 4200 printer from a 64-bit Windows 7 computer and you are trying to install the driver, it says driver not found. * INI file missing

  Original title: Reader for printer HP LaserJet 4200 for Windows 7 gives problem

  My hp laserjet 4200n printer is connected to a print server of XP through the parallel port, when I share this printer from a 64-bit Windows 7 computer and you are trying to install the driver, it says driver not found. * INI file I already Miss down site fromhp driver loaded but invain.

  Please suggest

  Hi Mohammed Arif a. R,.

  You can try to plug the printer again and check the updates of Windows and see if the drivers are install.

  Install Windows updates in Windows 7

  http://Windows.Microsoft.com/en-us/Windows7/install-Windows-updates

  You can also view the following HP Web site and try redownloading drivers and check.

  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=us&prodNameId=84033&prodTypeId=18972&prodSeriesId=84028&swLang=8&TaskID=135&swEnvOID=4063

  Also check out the following link and try the suggested steps.

  Network printer problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-printer-problems

  Note: This article also applies to Windows 7.

  Hope this information is useful.

• Cursor flashing at the start of the system and hard drive not working do not on the other computer

  Original title: I need help with my Hardrive

  Recently I had problems with a hard disk of computers. So I'm going to give guys the full story, I fell on this computer, it's actually my mums computer and it had a blue screen at startup error. I'm sorry, but I don't remember that the error was called on the top of my head, basiclly I quikly searched online and alll they say should use fixboot. So I did and the computer booted Windows XP very well. So the next day, when I was starting the machine (just to let you know, it would be the first start since I used fixboot, other than the right after that, I don't know if it would make a difference).

  In any case, while trying to start, there was just a slider, or as underscore that retain just flashing in top left corner. I thought that maybe I should reinstall windows on another partition so my files would be safe. I did it, the installation program had no problem with it, but when I booted up I got the same line of flashing underscore / cursor in the upper left corner.

  I thought that maybe I should back up the hard drive using my other computer so I tried to plug in the hardrive in my work computer and the hardrive started to heat up and as if it worked but any hardrive was getting into my computer, I refreshed it, started the computer upward once again, nothing.

  So my question is what is the problem with this hardrive and how I save? I'm ready to do anything, use the live CD, using another computer. I have precious moments of family on the hardrive.

  Thank you guys

  Hi Joemost,

  As you have important data on the hard drive. We recommend that you contact the vendor of hard drive to diagnose hard drive or visit the nearest tech store to save your data.

  There are chances that the boot files are missing on the computer and also you could have not connected the hard drive as a slave when you connected to the other computer. Once you have saved the data, you can repair the existing windows and check if it starts successfully.

  Try these steps to repair install Windows XP:
  a. start the computer using the XP CD. You may need to change the boot order in the BIOS OF THE system for the CD starts before the hard drive.
  b. on the "Welcome" screen, press ENTER to start the installation of Windows.
  c. accept the license agreement and Windows will search for existing installations of Windows.
  d. Select the XP installation you want to repair in the list, press R to start the repair.
  e. the installation program copies the necessary files to the hard disk and restart.  Do not press any key to boot from CD when the message appears. Setup will continue as if it were a clean install, but your applications and settings are preserved.
  f. when the installation is complete, check if Windows starts correctly.

  Visit our Microsoft answers feedback Forum and let us know what you think.