CD ROM not showing drive is not in my computer.

Similar Questions

• I understand that the watch ntbtlog.txt file drivers loaded during the startup process. I'm worried when it shows driver loaded, but it is not a list.

  I understand that the watch ntbtlog.txt file drivers loaded during the startup process. I'm worried when it shows driver loaded, but it is not a list. Why is this?

  Hello

  Yes, it can be in hidden files that may cause by the virus.

  I also suggest you to see link and check.

  Show hidden files

  http://Windows.Microsoft.com/en-us/Windows7/show-hidden-files

• Windows 8 DVD ROM not reading discs

  Yesterday I installed a few games on Steam, I was playing Saints Row the third while he was busy installing and bit after that I had to restart my PC because it was originally the trolling game. At the next startup, my laptop then got stuck on the login screen, where I put in my password/PIN and it would just sit there and do nothing. This kept going until that of course I had to go in safe mode and use that 'Everything clear, but keep your files' option windows 8 a, and am now able to log in and access my files.

  Nut, now I am faced with a new problem, my DVD ROM will not read and disk I insert in there. It was working fine until I deleted everything, and now I can't use it.

  I tried to use the tool of diagnosis provided by Microsoft for this problem, but it does not work. I should also mention the possibility of editing the registry does not work either.

  My laptop is reasonably elderly, ten months or so, but I doubt that it is only a hardware problem because the DVD ROM shows on my computer and device manager says it works very well.

  Are there other solutions for this or should I just take it back to the shop?

  Hi Taonga,

  Thanks for posting the query on Microsoft Community.

  I'm sorry to know that the DVD ROM is not working now. I appreciate your efforts toward this problem. It could be a software or a hardware problem.

  1. What is the brand and model of your computer?
  2. What diagnostic tool do you run?
  3. Did you try it with any other DVD?

  You can try all the steps in the below link, it may be helpful when fixing the issue.

  Run this fixit: http://support2.microsoft.com/mats/cd_dvd_drive_problems/en-us

  If the problem is not resolved, then follow the link below.

  Your CD-ROM or DVD drive is not recognized by Windows or other programs:

  http://support.Microsoft.com/kb/314060/en-us

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following article:

  How to back up and restore the registry in Windows
  http://support.Microsoft.com/kb/322756

  I hope this helps to solve the issue. If the problem persists, contact us. We will be happy to help you.

• 2nd hard drive appearing is not in my computer

  My 2nd hard drive is not appearing in my computer.  The hard drive was a slave, that I took from my old xp machine after it crashed.  I had installed in my new vista machine before and it worked, but then I had to reinstall the operating system and since then he did not appear.  I double checked to make sure, it has been defined as a slave drive and it is.  It appears in the Bios, Device Manager and in disk management, but not in my computer.  Nothing is appearing as unallocated in disk management and the player said his good health.  In the Device Manager, it says the device is working properly.  I tried to give him just a drive letter in the management of records, but when I right click on it the only option I have is help.  I also tried to update the drivers, he says that they are up-to-date.  I tried deactivation and activation of the hard drive.  I even tried to uninstall.  When I rebooted, it detects and reinstalled the drivers, but I still can't get it to appear in my computer.

  Alw179,

  so I assume you are using the new Windows 7 for this post.

  Proposal of John Doe has worked for me. This is how do you a little more in detail:

  step 1: Windows 'Start menu '.

  Step 2: SPECIFY the, "disk management" in the box "search programs and files" at the botom

  step 3 find and RIGHT click on the hard drive in the list that program shows.

  step 4: select 'Change Drive Letter and paths '.

  step 5: click Add and make sure that ASSIGN it THE FOLLOWING DRIVE LETTER: bubble is selected and then use the drop-down menu to select a drive letter, do not use it.

  step 5: click OK

  step 6: complete, you should have something pop up indicates that your hard drive is available to show.

  I hope this helps.

• Hard drive replacement, windows support, media does not support this computer?

  Laptop HP G72 M #-C55DX, I replaced my hard drive with the same OEM, 4 recovery disks made when I bought the laptop new, replaced the hard drive, run startup test, memory and hard drive OK, insert #1 recovery disk, windows loads, then get the system recovery media does not support this computer. you are not able to restore the system with the media. I have windows 7 Premium I don't know what to do next. Thanks for the help. Frank

  My recovery disks that I had at the beginning are bad. Has bought the HP boot disks. up & running, thanks Frank

• Drive hard USB are not not in my computer

  All of a sudden after a reimage my Windows XP, my external Maxtor OneTouch usb hard disk drive d: is not yet in my computer, where it has always been. I see the c: drive and the CD/DVD drive e:, but not the d:. Why not? It is not found except in my computer > properties > device listed under disk drives Manager. But if I click on my computer, it is not shown and the disks c: and e:. It is plugged in USB and power cord. A light is on the front. But I do backups on this disc and suddenly impossible since "exists". I'm losing it? Why it is not in my computer? I need to access this disk so I can restore my backup to my Docs.

  I got a new computer with XP installed.  My last computer was XP and this 500 GB LaCie external drive worked fine.  Now, he does not appear in 'My Computer' but it appears as unknown in Disk Manager.  How can I get my computer to read this disc?  He has my back up files it contains...

• Installation of Vista on the new hard drive was interrupted, and now I can not start the computer

  So I decided that I need a bigger hard drive. I got a 500 GB hard drive, so I have it PLOPPED in my Acer Aspire 5517 with my vista boot drive, turned on and began to go through the process. Once he got to the phase 'installation complete' it seems to take a while, so I let it run all night. Once I got up, it was on a black screen with the mouse, I let stand a few more minutes but still nothing. I turned off and started it expects to find to return at the beginning of the installation, but instead he began to start from what is on the hard drive at this time. It got to the screen with the loading bar and the sign 'Microsoft Corporation'. The loading bar was very frigidity and stopped and started randomly. I let it do this while I went to school, but when I got home, it was always the same loading screen. I rebooted and tried to start in safe mode, but when I do it it stops at crcdisk.sys, and never forwarded charges. I tried to do the reset thing factory start it but that doesn't seem to work. My other puny hard drive still works, but the other does not. I searched the internet but have not seen any other problem like it. I want to just start completely clean of my new 500 GB. Please help!

  Hi James,

  1. What is the number of brand and model of the hard disk of 500 GB?

  2. How did the 500 GB hard drive connected to the computer? It is external or internal?

  To troubleshoot the unable to start the issue to cause corrupted driver, some files that can not be loaded during the startup process must be fixed or restored. So, let's check the disk by using the Windows Recovery Console.

  (a) put the Windows Vista installation disc in the disc drive, and then start the computer.

  (b) press a key when the message "Press any key to boot from CD or DVD ".

  (c) select a language, a time, a currency and a keyboard or another input method, and then click Next.

  (d) click on repair your computer.

  (e) (click on the operating system you want to repair), and then click Next.

  (f) in the System Recovery Options dialog box, click command prompt. Type chkdsk c:/f to try to correct the errors.

  (g) Note: answer them when chkdsk asks you if you want to check the disk next boot Vista

  (h) after the recording of the disc, and then run sfc/scannow to check the corruption of system files.

  Important: when running chkdsk on the drive hard if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data may be lost.

  Check out TechNet help links and check if that helps:

  The computer starts stops at crcdisk.sys

  Help! Vista won't start... (crcdisk.sys)

  Let us know the status of the issue. If you need help, please after return. We will be happy to help you.

• Drive hard not in my computer but device and computer management Manager

  Hi all... I have some extremely important irreplaceable files on my second hard drive. Today, I bought an external to save them, and when I turned on my computer, I was unable to get the disk. The drive is listed as "RAW".

  Then I tried to start to recover files of any programs online, they just finally estimate a 35 hour and counting wait and then my computer crashed. So I restarted and now the drive is unrecognizable in "My Computer" but it is listed in the device (such as a storage device) Manager

  I tried 2 diff computers and also 2 different external case with the same result.

  For any help or suggestion is very appreciated!

  Thank you!

  Derek

  Hello DMoneyPros,

  • What is the status of the hard disk in disk management?
  • Your external hard drive appears as a raw management disk or hard drive Partition?

  If the disk hard not not display in Windows Explorer appears in disk management, this means that the hard disk is raw and is not formatted?

  You should try to assign the drive letter of the hard disk in the disk management and check if it appears in Windows Explorer:

  Change the drive letter:

  1. open computer management by clicking the Start button, click on the Control Panel, clicking system and Maintenance, clicking Administrative Tools, and then double-click computer management. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  2. in the Navigation pane, click Disk Management.

  3. right click on the partition or drive that you want to change and then click on change drive letter and paths.

  4. to change a drive letter, click on edit, click on assign the following drive letter, click the letter you want to use and then click OK.

  Thank you
  Irfan H, Engineer Support Microsoft Answers. Visit our

  Forum of Microsoft answers Feedback and let us know what you think.

• I bought a "Windows Vista SP1 Upgrade disc" Wal-Mart and on the accident. I thought it was a full version, but turned out to be upgraded. How can I install this drive to upgrade on my computer if I do not already have an existing operating system?

  I bought a "Windows Vista SP1 Upgrade disc" Wal-Mart and on the accident. I thought it was a full version, but turned out to be upgraded. How can I install this drive to upgrade on my computer if I do not already have an existing operating system?

  You need a disk FULL/license to do a clean install, not an upgrade license.

  Take it back to Wal-Mart and see if you can exchange it.

  See you soon. Mick Murphy - Microsoft partner

• My hard drive died, I tried to download a boot disk but recieced message this product key was not for this computer.

  * Original title: boot disk

  My hard drive died, I tried to download a boot disk but recieced message this product key was not for this computer. I can't use the computer crashed so, how do I get the startup disk

  IF the OS came preinstalled, you must obtain from the computer manufacturer.  Microsoft is supplying more filtering alternatives.

• diving USB hard drive appears on the Control Panel, but not on MY computer

  Drive hard USB part on the Contrlol Panel but not on my computer.

  Hi Frank,.

  Thanks for posting your query in Microsoft Community.

  If I understand you correctly, the external USB hard drive (HDD) appears in the control panel but does not seem to be detected in my computer screen. I will certainly help you to question, however, I would be grateful if you could answer a few questions to refine the question in order to provide you with better assistance.

  (a) what is the brand and model number. the USB HDD?

  (b) has detected before HARD drive in my computer screen? If so, did you do changes on the computer before this problem?

  (c) that you get an unrecognized USB device notification error message?

  The unit is probably go up at the same point one of the partitions and thus becoming "invisible". In

  in order to further diagnose the issue, I would suggest trying the following methods and check if the problem persists.

  Method 1:

  Try running the Fixit tool from the link below.

  Hardware devices do not work or are not detected in Windows

  
  

  Also, run the next fixit to solve common problems with USB devices.

  Diagnose and automatically fix the Windows USB problems

  If the problem persists, try the following method.

  Method 2:

  Remove and reinstall all USB controllers.

  1. Open Manager devices by clicking the Start button, click Control Panel, click system and security, and then, under System, clicking Device Manager. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  2. In the list of the categories of equipment, locate and expand Bus USB controllers.
  3. Right-click every device under the Bus USB controllers node and then click Uninstall to remove them one at a time.
  4. Restart the computer and let the USB controllers get reinstalled.

  Plug in the removable USB device and perform a test to ensure that the problem is solved

  Also, refer to:

  Updated a hardware driver that is not working properly

  Hope this information is useful. Let us know if you need more help, we will be happy to help you.

• DRAC 5 installation media: "Selection of CD/DVD-ROM not valid."

  I connect to a Drac 5 with firmware version 1.33 using 32 bit Firefox 2.0.0.20 as downloaded from Mozilla.org running on CentOS 5.2.

  It seems to me installing the Console and media attach the plug-ins OK, but I get a problem when I try to join a DVD-ROM. I select the ISO from Centos 5.2 image, but when I press the Connect button I get a pop-up indicating that "the page at https://192.168.108.102 says: ' then 'selection of CD/DVD-ROM not valid.'.

  If I try the same thing using IE 7 under Windows, it will connect, but since I don't have Windows in the data center is too slow and no use for me to try to connect a DVD over the WAN.

  I searched Google and found nothing documenting this error so I am a bit stuck as to what it means and what to do about it.

  I tried to run firefox as root also in case the plugin was trying to cordon the ISO file.

  I also eliminated any firewall blocking the ports.

  This problem is related to Internet Explorer 8.
  The error can be resolved by adding the IP address as a trusted site in Internet Explorer 8.

• I have attached USB storage device, but its showing is not in my computer

  I have attached USB storage device, but its showing not in my computer coution marks appear on the icon of the device and wpd files hv prblem please tell me the soloution

  Try to reinstall the usb drivers and the chipset of your PC manufacturers support site

• How can I reinstall audition CS6 upgrade after hard drive crash?  Qualifying previous product is not on my computer.

  How can I reinstall audition CS6 upgrade after hard drive crash?  Qualifying previous product is not on my computer.

  Never mind.  I found the license key for the previous product and was able to complete the installation.  Being a "pack rat" has its merits, sometimes.

• Hello! I installed Adobe premiere pro and Creative Cloud show that the app is installed, but it is not on the computer. What should do?

  Hello! I installed Adobe premiere pro and Creative Cloud show that the app is installed, but it is not on the computer. What should do?

  You have a 64 bit system? If this isn't the case, it will not work.

• Had a project done with first elements 11.  All media files and PRE files were in the same folder on an external hard drive.  Received a new computer, loaded first items 11 (which of course doesn't recognize not all previous projects as it is)

  Had a project done using first items 11 (the file exported and posted on youtube).  All the media files and PRE files associated with this project were located in the same folder on an external hard drive.  Got a new computer, responsible for first 11 elements (which of course doesn't recognize not all previous projects because it is a new installation) and now cannot open the original project to make some adjustments (connected to the external hard drive of course)...  Even tried to open the last saved auto program as well, no luck.  Just get a shell of the original project, but no real media file is passed in. Then get a prompt asking you where the file "rendering-3090026..." (20 More digits) is located.  Looking for C drive and external hard drive without success. Help!

  

  delilah12

  Which operating systems are involved - old and new?

  The external drive has the same drive letter on the new computer as it did when it was used on the other computer?

  Where are the video preview and the old led, Audio preview files compared to new? See Edit Menu/preferences/Scratch discs?

  Are all the place where is the file... messages just to render files? If all are for rendering files, what happens if you click ignore for their

  messages? Can you enter into the project and render it again if necessary and proceed with the project?

  Please see the bulletin. With the above information, we will decide which way to go? It seems that a media disconnect situation has developed in

  the passage from one computer to the other.

  RTA