D - Port on models G30

Similar Questions

• Belkin usb 2.0-4 port hub - model No. f4u020

  I bought a Belkin usb 2.0 hub with 4 ports. It is a model No.: f4u020 and there is no user's guide in the area and none that I can find online anywhere.  The person in the store where I bought it can't answer a phone.

  The hub, I bought is "powered" it which means it came with its own cable, connector and power transformer. The other centers I've used do not have "under tension" and seem to have simply operated by using the power of the computer itself.

  My computer is a Hewitt Packard (HP) 600-all-in-one with a 23-inch touch screen and a 1080 p LCD and I love her dearly.

  I want to use the new hub, I bought to run a new keyboard, a different mouse I bought and my Epson printer.  That should be no problem at all because I ran all that on my previous hub 'Non-Powered.

  So playing with this thing, I discovered that it is running with no other energy source, but the computer which brings me to my main point:

  Can I plug the power cord usb on an electrical outlet and allow the current to flow to the usb hub that I also have the computer itself connected to a wall outlet?

  This means that the computer and the new hub would receive an ankle at the same time electric current.

  I am so naïve to all electronic things and I know this kind of question is probably too simple and could be offensive to anyone familiar with computer stuff very well - but I want to use the new hub and I certainly don't want to do anything by FRY to power something.

  New: Should the two points - computer and hub be plugged into their own individual wall holds at the same time or should I connect one electrical appliances?

  If so, that could be you choose - the hub or the computer?

  Something that no one can say to help me would be sincerely appreciated since I have absolutely no common sense about these things at all.

  Hello

  Based on the following link, it has a power adapter so it should just be able to do the job and you must plug it into a power outlet.

  http://www.bhphotovideo.com/c/product/813094-reg/Belkin_F4U020_4_Port_USB_2_0_HUB.html

  No problem when taken PC and the USB hub in decision-making.

  Kind regards.

• Where can I find the sata port. Model Acer Aspire m1640

  If you need more information please tell. IM new to all this and don't have anyone to show me if im asking here.

  This is a desktop computer

  Hello TrynaLearn,

  For Aspire M1640-M3640-M5640:

  You will find sata 4 ports near the battery (round like a coin): SATA1, SATA2 and SATA3, SATA4 (printed on the motherboard).

  They are orange.

• Lenovo g550 20023 HDD SATA port type of model?

  Hello

  I want to change my HARD drive, because it is broken and I need more info on my laptop Lenovo SATA port (G550 model 20023). I need to know if it is of type 1 SATA / SATA-150 or so is SATA II / SATA-300.

  Also please tell me if it is possible to upgrade to an SSD? Thank you.

  Kind regards

  Hi again,

  The topic can be closed. I contacted Lenove hotline.

  For all those who need this info: this is a port of type SATA II.

• How can Qosmio G30-126 - I check the fan speed?

  MODEL: G30 - 126
  OS: VISTA 32-BIT SP2

  How to know the speed of the fan? I have try several programs like "sensor hw monitor" & "fan speed" but it's not watch everything think about the temperature of the CPU just fan speed.

  Where is the problem and what I need to do?

  Hmm... Why you want to know the speed of the fan?

  The fan speed will be automatically controlled and you can t change this or manually control. You can change the method of cooling between performance and battery optimized in Vista power management. Did you check that?

  In addition, you can clean the laptop using a jet of compressed air as Akuma written. This could blow out the dust from the cooling fans.

• Qosmio G30 and intel SSD - Windows 7

  Hi, I'm new to the forum

  I have a Qosmio G30 with Windows 7 32 bit - model G30 140 31F
  I bought an SSD intel 160 GB because of the promissed 250 MB/sg reading speed, because I need for video editing.
  I tried in Win Xp and now Windows 7 and it gets up to 120 MB/Sg

  I guess it s because of the drivers but I instal the drivers of storage can´t intel matrix any version of it. I tried a lot of them and with the compatibility mode too. It gives me an error saying I have not the minimum requirement.

  I have 4 GB of RAM and 2.0 Gzs centrino duo.
  I have install intel ssd toolbox and it does not recognize the intel SSD drive as a drive intel to improve the speed and other things.

  Please help me to get my speed in the car because it has to be and to have the TRIM option enable in order to have the life of my unit any longer.
  I also have the latest firmware in the drive.

  Thank you in advance.

  DANI

  PD: It coul be, perhaps, if our computer is a sata 150 controller in place a 300 sata controller? I don't know if the control is one of them in any case.

  Post edited by: Gazpachete

  Hi Gazpachete,

  I put t know how you managed now installing Windows, but Qosmio G30 is equipped with a SATA150 interface... This means that you will never get the 250 MB/s read speed of the HARD drive. You will get a maximum speed of 150 MB/s theoretically, but in most cases it of also a little slower.

  How did you check the current speed?
  But 120 MB/s is a good speed. You should be satisfied and it s faster than each computer portable HARD drive. ;)

• Qosmio G30-117: what sound card?

  Hello

  Can someone tell me what sound card is the G30 - 117.

  Hello

  I found this info on the sound card for the other models G30 (must be the same):
  SigmaTel STAC9200D

  Good bye

• Qosmio G30: Upgrade Vista session: new RAID not recognized

  Hello everyone

  I tried to upgrade vista manual upgrade option, but 2 problems have occurred:

  1. I could not remove these applications (are not not in Control Panel > Add/Remove)
  -> Bluetooth ACPI by Toshiba
  -> TOSHIBA TV TUNER
  -> Nvidia nView Desktop manager
  -> windows 5.1 msnger

  Then, I ignored them and proceeded, I faced a new problem, the new RAID drivers cannot be recognized in the partition screen.

  If I could solve these problems, I get vistaif you have any ideas it would be great.

  Hello Togan,

  Good to see you, engaged with the issue of Vista g30.
  This thread will be important for us, all owners G30 and the g20.
  We stay with you, watch and learn listening and if possible to help you.
  But as I don't have a model g30, let's wait for each of you, out there with the same purpose.
  Help togan and us by your advice and suggestions in relation to our Qosmios.

  First tip: as I told you, please start by a new installation of Windows Vista. Switching from XP to Vista, is not the best way to follow.

  See you soon,.
  Francisco

• Tecra M5-compatible Port Replicator of Tecra 9100 is?

  I have a port replicator (model PA3082E-1PRP) for my old 3 years Tecra 9100 defective. I'll buy a Tecra M5. Do I need to get a new Port for the M5 Replicator or my old one is compatible with the new computer?

  Hello

  I think that it should be compatible.
  But on the Toshiba options and accessories site I found that these devices with M5 supported:
  Advanced Port Replicator III PA3314E-1PRP
  III Advanced Port Replicator more PA3474E-1PRP
  USB 2.0 Port Replicator II (Ethernet / EU Version) PX1173E-1PRP
  USB 2.0 Port Replicator II (Ethernet / UK Version) PX1173U-1PRP

  To my knowledge, these are the most recent port replicators which are available may be so old appliances are not listed.
  I think you could try carefully connect the laptop with your old port replicator.

• Setting up RAID1 on Qosmio G30-116

  Y at - it guides regarding the implementation of raid 1 on model G30-116.

  Are there hidden traps or pitfalls I should know about?

  Hello

  Usually after a change of the RAID option, you have to reinstall the entire operating system! Because you will have lost all the data!
  As far as I know, you can change the RAID in the BIOS on the 3rd page

  Please also read the information contained in the user manual. There you should find the details.

  It is also a very interesting announcement:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=14349&MessageID=52361

• DV7-4070 port

  HP Pavilion DV7-4070US

  On the left side, there is a port labeled as (point 5 of the user ID of man) eSATA/USB port (some models only).

  Its function is indicated as - "connects to a pane optional high performance eSATA, such.
  as a drive eSATA external drive, or connect a USB option
  device.
  NOTE: Depending on the computer, the computer may
  include only a USB port.

  The port looks different from USB only and as an available eSATA connection.

  My question - is an eSATA port or a USB port?

  Or - is a port of the combination that will accept either?

  I find little or no info on this.

  Yes, you should be able to put USB in port... Here's how the Port... So you need to use a normal USB port... It can feel a little difficult to put into 1...

  

• audio off when it is associated with the port replicator

  I use Windows XP with my Thinkpad T400 and I bought a Lenovo port replicator model k33415 with my computer.  I have a keyboard and a mouse attached to the Port Replicator port as a PDA sometimes.

  Whenever the port replicator is connected to the computer, the computer speakers do not work and I hear no audio.   When I restart the computer without the attached port replicator, the computer speakers are working fine.      I've tried everything!    Any ideas?

  Hello!  In fact, I fixed it on my own.   Under sound properties I adjusted the audio settings for 'Conexant HD', he made my default device, and under AUdio and then "Advanced", I needed to set speakers to computer speakers.  What I haven't done yet we see if this turns off audio when I unplug the duplicator... so I guess I need to change the default device.   You may not have the same problem, but in any case, good luck!

• HP Pavilion s7210n card mother SATA compatibility

  Hello

  I have a question on a motherboard that is installed in a PC HP PAVILLION of Slimline s7210n, purchased in 2005.

  This is all the part # and other information that I could see on the motherboard:

  PTGV-LM
  N13219
  C58S198-00877-60-MBL3A2-A04

  The original hard drive is SATA 1 (1.5 Gb/s).  I would like to replace the original HDD with a SATA 2 (3 Gb/s) HARD drive.

  The motherboard has 2 entry SATA connections.  The connection that is not used is labeled "SATA 3" on Platinum motherboard.  I think that it is a 'SATA 2' port and model of PCB plate refers to the speed (3 Gb/s) since SATA 3 (6 Gb/s) is only available in 2009.

  This PC was purchased in 2005.

  A SATA 2 HARD drive will work with this motherboard?

  Hello:

  A SATA II HARD drive will work, but only at the speed of 1.5 transfer in this PC.

  That's all the 915 chipset can handle.

  The port numbers are only of numbers, not of speed of the sata drives.

  You plug certain devices into ports with some numbers.

  For example, you would plug the bootable hard drive into port 1, port 2, a DVD in the 3 port high school.

• Should which adapter I have for my Qosmio G35-AV600?

  Hey there,

  I was totally happy with my recently bought FullHD 26 "screen with HDMI input.
  So I thought that, slowly, stop using the PC and start working with your laptop computer to your new display using the HDMI port.

  So I ordered one, but then acknowledged that the port on my Qosmio was also smaller and specifications product name "Digital Component Out port (HDMI Out port BOF model HD DVD).

  Because HD DVD is dead, I have now a problem connecting my laptop to my screen.
  Can someone quote me that an adapter name with I could use?

  This laptop's mini HMDI port?

  I hope someone here can help me.

  Thanks in advance.

  BassiAssi

  Hello

  I searched the internet for some details on this model of laptop, and it seems that these video output ports are supported:
  -Output RGB (monitor) port
  -S-video output port
  -Component port D-connector output cable

  So, it seems that there should be a D connector cable that should provide more detailed connection possibilities.
  But I don't know if you would be able to connect to HDMI m port.

  My laptop supports the HDMI port and DVI monitor.
  I connected the two devices using an HDMI cable to DVI. DVI is compatible HDMI. Only the audio signal is not transmitted via DVI.

• Can I connect my MacBook Air to my Mac Mini so that I can use the display of the Mac Mini?

  Hi all

  Can I connect my MacBook Air to my Mac Mini so that I can use the display of the Mac Mini?

  The Mac Mini is the end of 2014 with 2 ports thunderbolt model and is connected to a mini display port monitor.

  I'm just fed up of having to pull on the cable of the Mac Mini to connect the MacBook Air.

  Any ideas? Suggestions?

  Thanks in advance!

  Using the built-in screen sharing are an application like:

  ScreenRecycler

  Only some iMacs support the target Display Mode

  Use your iMac as a display with the target - Apple Support Display Mode