Belkin usb 2.0-4 port hub - model No. f4u020

Similar Questions

• Belkin USB Hub does not work with my Satellite A30

  I recently bought a belkin usb hub high speed and I can't make it work on my satellite A30 properley. I was told it was something to do with the standard devive Manager improved! I was told he shouldn't say that, but not how to solve this problem? any ideas?

  Hello

  Is the USB hub with external power supply.
  Because without one, it may be that the A30 does not provide the tension that the hub needs!

  Good bye

• prolific usb-to-serial com port driver problem. I can't load the driver from propper for her. What should I do?

  prolific usb-to-serial com port driver problem. I can't load the driver appropriate for that. What should I do?

  Hello edmcski,

  This thread has been created in the Feedback forum. the Microsoft moderation team has moved this thread on the forums of hardware and drivers.

• Need software for USB driver for JVC digital camcorder model GR-No.-D870AS with window xp

  Need software for USB driver for JVC digital camcorder model GR-No.-D870AS with window xp

  Hello

  I suggest to see the link and install the drivers and check.

  http://www3.jvckenwood.com/English/download/index.html

  I also suggest you contact the manufacture of the product and check.

  http://www3.jvckenwood.com/English/support/index.html

• Can I add a USB N wireless adapter to a model of hp 4500 G510a making it a model G510n

  Can I add a USB N wireless adapter to a model of hp 4500 G510a making it a model G510n?

  Hello 9943,

  Sorry no.

• Need help to install Belkin Wireless USB 4 - Port Hub (HUB-F5U303)

  I recently got a Belkin Wireless USB hub, but I can't install/configure on my laptop ASUS Windows VISTA Home premium 64-bit.

  Belkin tells me I should have a Windows app, "Wireless USB Manager for Windows Vista", in my windows system tray, but I have not listed.  And Belkin has not all the drivers available for download, as they claim that my Vista PC should already have the necessary software.

  Any help would be appreciated.

  Thank you

  Hello

  You can try to update this link USB drivers:

  http://xpdrivers.com/USB/ASUS/_3_2549.cfm

  Note: Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  As well, contact Belkin to see if they will release an update specifically for your operating system and a USB port.

  
  Reference: http://www.belkin.com/support/

  Hope the helps of information.

• My USB 7 port hub will not work. Error Msg says lack of driver but driver seems useless? Any ideas, anyone? I'm on windows 7 64 bit.

  First of all, my old 5-port Belkin hub worked perfectly but just leave me about 2 weeks ago. It will appear on the page of familiar devices of exclamation in a yellow circle. I tried to restore my settings of PCs, but in vain. I talked to Belkin and they said because it's a simple device plug-and-play, no driver is necessary. I bought a new hub 7 port powered this week, but the same thing happens. the PC won't start.

  Hi Mark,

  Try this... See the website of the manufacturer of the computer. Search and find your model, download the drivers appropriate for your system and peripheral. Restart and try again.

  B Eddie

• Belkin USB HUB F5L009

  This point has worked on Windows 7 now I am Windows 8 elements appear in the control center software, but does not any ideas connect

  [Moved from comments]

  I solved this problem.

  In ' Manager (devmgmt.msc) Windows device, the SXUPTP driver showed as disabled. Windows gave a warning that the device was known to have stability problems. I discovered that SXUPTP is a driver of a company called Silex. Flint makes network USB hubs, so I guess the hub from Belkin is a hub of renamed Flint.

  To update the Flint driver follow these steps:
  1 close the tray of the network Belkin hub application.
  2. download the latest version of SX Virtual Link (sx - virtual_link_win_3120.zip).
  3. extract all the files.
  4. in Windows Explorer, navigate to the sx-virtual_link_win_3120\s-33a3120\Files\Bin\Sxcsapi\WinVistaX64 if you are running a 64 bit OS, or sx-virtual_link_win_3120\s-33a3120\Files\Bin\Sxcsapi\WinVista if you running a 32 bit OS.
  5. right click on 'Sxuptp.inf' and select 'Install' from the menu.

  The driver will be installed and the warning in the Device Manager icon should disappear. You may need to reboot for the changes to take effect.

  I hope this helps.

• Does not my wireless connection using one of Belkin USB adapter. Help, please!

  I have a Belkin F9L1101v2. He used to work, but recently he has not worked at all. I am able to connect to the wifi, but I get no internet access. Convenience store, said "the link between your access point, router, or modem cable, and the internet is broken." I worked for hours trying to solve this problem, but nothing really seems to work. Would be very happy for any help!

  1. how you connect to the Internet to ask your question?

  2. the Belkin F9L1101 does not connect to the Internet.  It connects via WiFi to your router or wireless access point.  What means the error message.  What is the brand and model of your access point wireless, router or wireless gateway?  If you have another cable or DSL modem, what is the make and model of this device as well?

  3. on the other hand, the error message may be wrong.  How do you know that you can "connect to wifi?

  Is the light on the F9L1101, flashing, or disable?
  Open Device Manager (type devmgmt.msc in the start search box and press enter).  All entries show a caution icon?  If so, which?
  Follow these steps:

  • Open a command prompt window (type cmd in the search box and press enter)
  • In the black Promt command window, type the following command and press ENTER after each line:
    ipconfig/all > "% userprofile%\Desktop\ipinfo.txt".
    Notepad '% userprofile%\Desktop\ipinfo.txt '.
    output
  • Copy and paste the contents of the ipinfo.txt file into your next reply here.  If you use another computer to post your questions, use a USB flash drive to get the file from the desktop of your computer problem to the computer you use to access the Internet

• Windows 7 Professional 64-bit disables 4 of 6 USB 3.0 rear Ports

  Greetings,

  I run a card mother Gigabyte GA-z77x-up4 with 6 ports USB 3.0 at the back. And with 2 ports USB 3.0 USB 2.0 and 2 in front. Once windows is loaded the USB 3.0 ports 4 back to become disabled. They still have power on (the led on some devices), but no device is recognized. If a device is plugged into these 4 defective ports, the error message "this device drivers have not been installed. (Code 28) "appears in the device with a yellow exclamation point Manager.

  I've tested all the front and rear USB ports with my keyboard in the Bios and Linux, all work and recognize the keyboard entries.

  Under Windows I have:

  Uninstalled/Reinstalled drivers USB/USB Host Controllers in Device Manager

  Check each USB controller enabled "Computer can turn off this device to save power" (were)

  "DisableSelectiveSuspend" line was added to the register in: Local_Machine/System/CurrentControlSet/services/USB

  Changed the parameters of energy saving of USB in 'Off' on "Sélective USB Energy saving"

  Digitized for the new hardware.

  This problem occurred on a vanilla to installation of Windows 7 (with no drivers/updates installed), as well as restoring a backup of a Windows 7 installation up-to-date with fresh (to 23) drivers (May), or by using a subject an old backup of 1 year.

  I'm running out of ideas what to do, as I keep plug devices outside all the time to compensate for the lack of 4 ports. Except to buy a USB hub and plug it into a port of lightning.

  Two drivers for my Chipset USB were offered on the page of the official driver mainboard. I had to install Intel AND VIA. After that VIA has been installed, the other 4 USB ports are recognized. Problem solved.

• Device USB 3.0, USB 2.0 connection ports of iMac

  USB 3.0 device not recognized: my iMac a 2011, 4 USB 2.0 ports.  I bought an external WD My Passport for iMac USB 3.0 external hard drive.  It is not recognized by the iMac.  The device works of WD - I plugged on new MacBook Pro from a friend and it worked in the USB 2.0 and USB 3.0 ports and on a newish iMac (I forgot to check the vintage).  How do I obtain backward compatibility so I can connect the WD USB 3.0 device to the iMac, USB 2.0 port?

  Data: operating system is current at El Cap 10.11.6. iMac (21.5 ", mid-2011) I've updated the installer of DW disk utilities, but that did not help.

  The device has been formatted as Mac OX extended (journaled) using disk utility. If not then of course it will not work, most drives come preformatted for need to be reformatted to work with your Mac and Windows boxes. BTW, have you considered buying a top quality case such as a Mercury Elite Pro (www.macsales.com), WD case aren't the highest quality and tend to have a high failure rate.

• Tecra S1: Duplicator USB adsl modem connection port

  Why usb adsl modem connected to the Port Replicator III works only for power and not for the link

  Hello

  What type of adsl do you use and what country you're from!

  What laptop do you have! What kind of operating system is installed? (Recovery or clean installation of MS)

  The USB port works if you do not have port replicator usw?
  What other computers, do they work well with other computers?

  To bye chris

• Re: Tecra A10 - USB problem on the port replicator

  I have a Tecra A10 and sometimes, when I work with her, the devices USB stopped responding if they are connected to the port replicator.
  If I connect them to the laptop, they work fine.

  I tried to update the BIOS but now when I turn on the laptop it freezes when Toshiba red letters are displayed on the screen. I can work with the laptop properly deattached starting from port replicator.

  Have you tried to load the default settings in the BIOS after the update?

  If you have external devices connected to the laptop they remove and try again in the duplicator.
  Maybe you should also update your laptop chip set driver. You can find them on the Toshiba site.

• USB & Firewire audio interface ports still work as input and output?

  I guess everyone has to start somewhere, even if it is borne by almost everyone I would like to know the answer to my questions, perhaps with good reason, what I don't know is so if the USB ports unique connection and firewire on an audio interface function ALWAYS both as input AND output.  In other words, whenever I read the information about the product on audio interfaces, no matter where I go, it is generally accepted that most people buy their audio interface for RECORDING.  And so when most people talk about connecting their Apple computer, iMac or MacBook Pro, it is generally accepted, they turn to the USB as INPUT.  That's all very well and good.  But in my case, I want to use the USB port as output (not the taken mini) and go into an audio interface that gives me as a symmetric output signal that I can plug my amplified studio monitor (which has only a balanced XLR input). All of the examples I see with audio interfaces address registration and involve the use of the USB on the audio input interface.

  So my question is: can one USB port I see on any number of audio interfaces always function both of the inputs and outputs? It takes, but if so, why does any site mention this fact and whey didn't they show in all the diagrams of the audio interface manual hook to studio monitors?  I know what may be obvious to some, but as a user with the intention not to use a piano for a scene while but rather a keyboard/MIDI controller that is attached to the iMac to be able to use the virtual instrument software, I need to go to the controller to the iMac, then the iMac in symmetrical powered monitors. Do the balanced inputs of speakers requires more than a simple adapter to give the President a balanced input.  But nobody talks about audio interfaces usually unless they talk about as a way into the computer to record.  As for my situation? Why don't they include this example?  And why should they assume that novice will automatically KNOW that the usb port, an audio interface will work as an output as if they never EVER mention this example or Setup?  I guess it is to operate in both directions!  But really, I'm crazy to wonder when no one never speaks or shows this configuration? He suggested I buy something similar to a UR22MkII of Steinberg, who has a USB port. Even the Steinberg site speaks only records and so using the USB key as input for use with the recording software. There is no mention of its use out the mac in balanced speaker entries, even in the manual. In fact, it is question is always true for every audio interface manual that I watched, even by other manufacturers! Why they all assume a novice like me (whose money is just as good as money from the experienced user) KNOW that? It's frustrating!

  I know that this is not strictly a matter of logic, but I guess, in my view correctly, that a logic user community could be more appropriate to address my question for others communities. If I'm wrong, please help to re-send-the matter.  Thank you.

  Sound the interface itself that determines it can send and receive Audio or Midi... not the USB or FW port which both are devices of e/s...

  All USB and Midi peripheral FW are inputs and outputs

  All the USB and Audio FW are inputs and outputs...

  All devices USB or external hardware with a USB port... can handle Midi and Audio...  Some do... Most manipulate just Midi... or just Audio

  The Steinberg UR22MkII manages Audio and Midi...

  However, I do not recommend USB 2.0 audio devices... There are simply too many cases, problems and questions after the major updates for OS X with such devices especially when they are class compliant (IE without driver), even if the UR22MkII Steinberg is supposed to be compatible 10.11...

  View the other may vary... because it's just a personal opinion based on my past experiences both in my studio... and based on the many issues presented here and elsewhere.

  I'm sticking with Motu equipment for all my Audio devices... and I use iConnect devices for my Midi needs...

• USB RS232 "is connected Port" "invalid property value".

  I'm quite new to this so if all the below is not clear or needs more explanation Let me know and I will try to provide information.

  I'm trying to integrate a device in my LabView program. Of its guides, that I could find on the site OR mentioned most NI MAX goes first and then working them down. My camera is an RS232 port, so I connected via a USB converter, and I know that I'm looking at the right port (COM5) to look at the section "manage devices" on the control panel.

  All series settings are set up properly, I would say (the user manual ishere, with 17 being the party and my setup herepage). I tried to test commands, he gave me on the input/output section, but constantly came up with the error "VISA: (Hex 0xBFFF0015) timeout expired before the operation is complete." Initially, I thought I entered orders incorrectly, I find instructions in the manual that is confused, especially compared to the things other users have posted on orders ('\r' and '\n' instead of what I am told to write, but I agree that mine are not always literal characters).

  But when I went back to "Display attributes" connected "East Port" final attribute has an error with the "invalid property value" and the warning Hex 0xBFFF001Derror. Because of my inexperience with all this, I don't know where to start really trying to solve this problem, or what measures are in place, I need to do to start working properly.

  All advice is appreciated. Thank you

  The property "is connected" is only for devices of NOR so if you have another brand of converter, you would ignore the error.