Similar Questions

• Unable to connect to the printer wireless HP D110

  Bought a new printer D110 last week.  Turned on, it has detected my wireless router Actiontec (Verizon FIOS) with signal max, and I logged it, using my WPA key.  It appears that he successfully connected and returned a hard copy report indicating that he has passed all the tests, at the address IP 192.168.1.4, which is within my reach.

  However, when I told the installer to use wireless rather than in USB mode and entered the IP address assigned to the printer, she returned with a message that it cannot connect to the printer.

  I disabled all firewall and antivirus software and repeat this step again and again, same result.  It's on a laptop Toshiba Satellite brand new under Windows 7 Home Premium.  The laptop has had zero problems wireless in and of itself.

  I repeated the installation on a 8 years old Sony Vaio laptop running Windows XP Home Edition with all the latest service packs and updates.  Same result, failure.

  I checked the software admin to the router, checked that it has detected the printer and assigned to this address.  However, neither the router nor either laptop can ping the printer successfully.  Laptops can ping each other, and the router pings successfully.

  I went to USB mode and connected the printer to the new laptop.  Works very well.

  I'm guessing there's a permissions/firewall problem going on here.  I don't use MAC filtering.  I opened the port 427 incoming UDP activity.  No change.  Any help appreciated.  Thank you.

  You can try to run WIndows Update again and again to make sure that your system is the last and largest.

  Also, download the latest version of the software for your printer from the "Support & Driver" link at the top of this page.

• HP series D110: update Apple OS Sierra this morning. Now unable to connect to the printer HP series D110 to scan.

  Apple OS update Sierra 10.12 and now unable to connect to the printer to scan. Version of the driver for HP printer is HP inkjet 1 pilot 3.3.2 can someone help me?

  @Lancer3

  Welcome to the HP Forums, it's a great place to get help, find answers and advice,
  Thanks for posting your request, I'll be more than happy to help you

  If I understand correctly the printer to scan does not work after the recent update of the Sierra,

  Don't worry, even if the following document does not mention Sierra, the Apple article will guide you through the steps to scan through

  • Image capture
  • Overview
  • Printers and Fax preferences in system preferences
  • Scanner / printer queue

  The basics of the Mac: using a scanner

  I also suggest to use the Apple Scan while you wait for the HP software update. You can use the link below to confirm that your printer is still compatible with your operating system: software of the printer and scanner for macOS Sierra, El Capitan, Yosemite, and the Mavericks.

  For links related, please here.

  To troubleshoot the macOS Sierra problems: click here

  If the information I provided was useful, give us some reinforcements by clicking on the solution and laurels, buttons that help and others see that we have the answers!
  Good luck.

• A cable is not plugged into the network adapter 'connection to the Local network.

  Hi, I am using a Dell Inspiron E1505... OS: Vista... 32 bit... IE 9... I still use dial-up "Conexant HDA D110 MDC V.92 Modem" connection connected to the internet without any problem... the problem is when I asked someone to download a program "MS Office Home Student & 2010"(acheté le logiciel àle staples)... the person downloading the program via an Ethernet connection on my laptop... "." I never use the Ethernet connection to connect to the internet... Open to the top of my "Network connections" window and noticed my 'connection to the local network' has a red X and says "network cable unplugged"....." "" Broadcom 440 x 10/100 integrated controller. My toolbar in the bottom right of the screen displays an icon of two monitors with a red x as... I have made several attempts to fix using the "Microsoft fix - it Center... didn't help me..." also "diagnose and repair" on my laptop... no positive results... In the window "Network & sharing" "also shows a red X... Please advise... Best regards, John

  Hello

  Reading between the lines a bit here, it is my understanding...

  1. Never use Ethernet, probably because you don't have broadband for some reason any?
  2. Due to the size of the download, you asked someone else to do it with no broadband?
  3. As a result, which is two screens with a red X icon, but never used to be there?

  This icon with the red X is only informative. If you do not use Ethernet then you won't have connected cable, which means that the information you see on "network cable is unplugged" is correct. If you don't like this icon, you can hide...

  • Right-click on an empty part of the taskbar, and then click Properties
  • Click the Notification area
  • You will see a check box for the network, there uncheck and then click OK to hide the icon
  • Reverse this process, if you want to display the icon

  Or is your problem you can connect is no longer with dial upward? If this is the case...

  • Click Start, type inetcpl.cpl and press enter
  • Click the Connections tab
  • 'Never make a connection' values? If this is the case, always select "default connection" (or "Number using whenever a network connection is not present")
  • Click OK

  Tricky

• Is connected to the Internet, but cannot use the Compaq Presario SR5123WM desktop PC

  Product name & #: Compaq Presario SR5123WM desktop PC (GC660AA-ABA)
  Operating system: Windows Vista Home Premium 32
  No only error message when Internet Explorer does not display the page or iTunes can't find any connection network (any application that requires an Internet connection).

  No changes were made to the system.

  I have the dial-up connection. The Bureau uses the Modem - PCI Soft Data Fax Modem with SmartCP (COM3).

  Once I start the computer, log in to my user and connect to the Internet, I click on Internet Explorer and type in Google to see if it would work. It is said that "Internet Explorer cannot display the webpage". For iTunes, he would say "iTunes has not to connect to the iTunes Store." Make sure your network connection is active and try again. »

  I tried all solutions online and by phone. I reset netsh int ip / winsock. I reset Internet Explorer options. Nothing works.

  What is strange, is that the Internet connection works well on my laptop (using Conexant D110 MDC V.92 Modem (COM3)).

  It would be GREAT if you could help me find a solution to this problem, because this has happened for months, and I'm tired of waiting. I put all my hopes on you.

  You may be able to do a system restore if the original HP partition is always on the computer.

  Here is a document detailing the steps:

  Perform a recovery of the system (Windows Vista) HP

• App store, Safari and iTunes does not connect to the Internet after installing macOS Sierra

  App store, Safari and iTunes does not connect to the Internet after installing macOS Sierra

  After upgrade 'OS X El Capitan' to "macOS Sierra" window only empty "App store" and page "Safari" made its appearance, no error message shows. store "iTunes" and "Dictionary" does not connect too.

  But Google chrome works well.

  So have you tried the next steps in your original post that Safari does not work after installing macOS Sierra:

  (1) x OS: "Unable to connect" or "unable to connect to the App Store. An internet connection is required"- Apple Support

  2) Advanced the steps to correct the problems with the iTunes Store - Apple Support connection

• iPad connects to the network, is unable to connect to Internet

  Received my new iPad. Automatically, it connects to my home network but does not connect to the Internet. I rebooted the router and the iPad, but the same thing. Same problem with the old iPad. That is what it is?

  Hello. When you go into settings > WiFi and tap the current network, that see you the IP address and other network settings, or they are all empty? You use DHCP to configure?

• My 5s iphone suddenly showed no service, then I made an attempt to update to ios and itunes connected, now iphone is not enable and display cannot connect to the server and in itunes it shows unable to check your device.please help me

  My 5s iphone suddenly showed no service, then I made an attempt to update to ios and itunes connected, now iphone is not enable and display cannot connect to the server and in itunes it shows unable to check your device.please help me

  Assuming that you have a valid SIM card in the phone, it is more often symptomatic of a phone that has been hacked or jailbroken to unlock.

  Where do you have the phone first?

• Can not connect to the WiFi on MacMini 2014

  When I try to connect to any WiFi on my MacMini it says ' Unable to join, try to get closer the router. but the router is right next to my Macmini.

  In addition, my wifi connection is correct. It is easily connected to my iPad and iPhone.

  I tried transferring a file using release from my iPad to MacMini. It worked.

  When I tried to connect to the MacMini with ethernet cable, it worked too!

  The only problem is that I can't connect to the router using the wifi on my MacMini.

  What should I do?

  Try to create a new network location:

  Using network locations (Mac OS X 10.6 and later)-Apple Support

  Try to connect as a different user.

  Have you removed the Mini?

  AirDrop uses bluetooth

  http://iPad.about.com/od/iPad_Guide/SS/what-is-AirDrop-how-does-it-work.htm

• Change of keyboard USB external Apple connected to the Macbook Pro

  Dear ladies and gentlemen,

  I need your help. I have a MacBook Pro running the last Sierra 17 "MacOS. I bought a 27 "Thunderbolt display and wanted to use a full external keyboard USB Apple (with the help of the digital keys). I have connected to the screen "USB port, closed down the internal screen MacBook... magic happened... keyboard poped office to the top of the screen external AND external full resolution was working properly..." Unfortunately only for 1-2 minutes, then the layout changed back irreversible in a layout resembling the layout if I would press "alt". Only way I could "resolve" to disconnect the keyboard USB plug and then plug again... but after 1-2 minutes did the same thing...

  I tried to plug the USB plug into the MacBook Pro directly, but the same thing happened...

  I am so unhappy that I can't use correctly the full length external Apple keyboard, large... Any hint/resolution?

  Thank you for your help in advance,

  Péter

  System Preferences > keyboard > Input Sources > [√] see Input menu in the menu bar

  ... then the menu icon before, choose «Show Keyboard Viewer»

  Now, look at the chart of the keyboard that appears on the screen. If the Alt/Option key is stuck, the key will be gray, as if it is held down. If you press it again, he himself is not?

• Unable to connect on the Messages or FaceTime after upgrading to Sierra

  Good afternoon! After upgrading my MacBook Pro (13-inch, mid 2010) to macOS Sierra (10.12.), I am unable to connect to Messages or FaceTime. They worked fine before the upgrade.

  • Messages: After entering my Apple ID and password, I get the message "Could not sign in iMessage." "Could not sign. Please check your network connection and try again. "or"an error has occurred during authentication. "My network is connected to the network (where this message), and the password is correct. Also, I have generated a password app specific to Messages. Enter just grew the message "your Apple ID or the password is incorrect." Messages is works well with my Google Talk and AIM accounts.
  • FaceTime: After entering my Apple ID and password, the engine just turns and it never connects me. Similarly, I have generated a password app specific but use it just gets the message, "your Apple ID or the password is incorrect."

  No idea how I can regain access to these applications? Thank you!

  Reached out to the Twitter account of Apple Support. He proposed to restart. It worked.

• "iPhone is disabled, connect to iTunes" AND "iTunes can not connect to the iPhone because it is locked with a password" error message on the phone and the computer! Help!

  So I recently had my password wrong too many times and my iPhone 4S locked out telling me "iPhone is disabled; Connect to iTunes'. And so I connected to iTunes and decided to restore my phone. I finished the process of restoration of the configuration of my phone, but ultimately, it was not even let me in the phone! Once AGAIN he said "iPhone is disabled; " Connect " to iTunes '. However, this time, this message appeared just when I turned on my phone with a black background. I didn't scan the screen for the error message is displayed (and there was no time to be shown). When I tried to connect to iTunes again as he asked, now it says "iTunes can not connect to the iPhone because it is locked with a password".

  So now, he said "iPhone is disabled; ' Connect to iTunes' on my iPhone 4S and ''iTunes can't connect to the iPhone because it is locked with a password ' on my computer. WHAT should I do?

  As described in step 2 of "Erase your device with iTunes" in this article, you will need to use the Recovery Mode.

  Recovery mode is described in this article as well.  You may try to go into recovery mode more than once to succeed.

  If you have forgotten the password for your iPhone, iPad or iPod touch, or your device is disabled - Apple supports

• Why always show that "there is a connection to the Apple store error."? It has been a month I am facing such a problem. How can I fix? Hope you have a solution to this...

  Why always show that "there is a connection to the Apple store error."? It has been a month I am facing such a problem. How can I fix? Hope you have a solution to this...

  I don't know if this is the problem, but it is something that must be correct establish a secure connection:

  Open Date and time preferences system, Date & time tab. Make sure that it is set to automatically set the time.

  Alternatively, make sure that your date/time is correctly set to the second.

  Another thing to try is to restart your modem and router.

• Devices to connect to the airport, but not to the Internet

  Hi all; Here's my situation:

  I just bought a new Airport Extreme to replace my old router (Linksys). In our House, we have two iPhones 6, as well as the iPad, Apple TV and MacBook Pro that were all bought again this year. All these things were able to connect to the internet using our old wireless router.

  As I have configured and installed at the airport, various devices have been able to connect without being able to connect to the internet (i.e. AirPort Utility, the airport connection is a green dot, while the actual internet connection is an orange): first it was the MacBook having this problem while the phones and the iPad have been completely connected. After I simply rebooted everything several times - i.e. the modem, router, and MacBook - I finally got the MacBook fully connected (without really changing all the settings, which are all entered correctly). Now, however, it is the two iPhones that will connect the airport but not actually in the internet.

  Any ideas? I must say, these strange little problems idiopathic who seem to always pop up with Apple products are starting to really bother me... I never got my MacBook to connect to the Apple TV via AirPlay.

  Any time you change the material or providers of Internet services, networking, it's always a good idea to perform a complete recycling of your network equipment power. Check out the following Tip of an airport users for more details on how to do it. Please post back your results.

• Unable to connect to the internet using Ethernet

  I have a Mac mini as I try to connect via Ethernet cable to a modem Comcast Arris TG862. I was connected via Wifi without problem (with the exception of the slower speeds). I know that the Ethernet ports on the back of the modem seem to work, since I can listen to my TV, etc. In settings > network Ethernet shows as green and connected and gives me an IP address, but as soon as I turn off Wifi no web page doesn't load.

  What I am doing wrong? I thought that it would just connect. On the Ethernet port lights, which I think means data transfer. Otherwise, I need to tell Firefox or Chrome to turn to the Ethernet connection?

  Thank you!

  The default configuration is to have the WiFi over Ethernet in the Service order.

  The order must be set such that the (desired) primary service is at the top of the list and the backup service is below.

  If you look at the order of service when it is connected to the network, the higher is the provision of access Internet one (or at least, he thinks Yes).

  To set the order, click on the menu of the machine and choose the order of Service. Move Ethernet to the top of the list. This should make it primary unless he loses the connection.

  However, it must move up Ethernet and provide a connection when you have turned off the WiFi. When you disable WiFi on the Mac, the Ethernet connection move to the top of the list and show a green connection?