D3D9window crashes firefox. Need to restart the computer. Often!

Similar Questions

• How to lock drive with bitlocker after security cancellation without the need to restart the computer

  When I canceled locking of the disc encrypted by BitLocker and the end of the review of files from the inside, and I need to re - lock the drive I have to restart the computer to block the drive again.

  Hello

  Windows 7 every time that you try to block a drive by using BitLocker in the computer must be restarted.

• Why need to restart the computer 2 x front can launch Thunderbird?

  When 1 computer startup, thunderbird says not responding do not.

  can not launch internet explore also.

  reboot again both can launch...

  using Windows vista.

  no problem when 1st installed.

  can use for a few months.

  • Restart the operating system in safe mode with network. This loads only the basics needed to start your computer while allowing Internet access. Click on your operating system for instructions on how to start in safe mode: Windows 8, Windows 7, Windows Vista, Windows XP, OSX

  If the safe mode for the operating system to resolve the problem, there are other software on your computer that is causing problems. The possibilities include but not limited to: AV scanning, virus/malware, background downloads such as updates of the program.

• HP LaserJet Pro CM1415: Printer will only print a single document. Bloggy queue and I need to restart the computer to print

  Printer will only print a single document. Bloggy queue and I have to restart my computer to print more than a single and repeat for each print job... very annoying. She's been doing this for printing the PDF, chrome, Word document, etc.

  Hello.

  Please, try the suggestions you find here:

  http://support.HP.com/us-en/document/c022054777

  Dovid

• Error "unexpected shutdown windows" and the need to restart the computer

  Original title:

  I use Windows Vista, I get the message "unexpected shutdown of windows" and I'm having to reboot is a solution to the Please this problem?

  Hello

  1. Once you get this error message?

  2. are you aware of any changes made to the computer, before the show?

  Method 1:

  Step 1: Safe Mode

  Start your computer in safe mode and check the number.

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Step 2: Clean boot

  If you are not facing the problem in safe mode, and then put your computer in a clean boot and search for the question.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: Once you are done with the boot, follow step 7 of article to put your computer to normal startup.

  Method 2:

  Update all the device drivers for your computer.

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  I hope this helps.

• Installation of the automatic update continuously restarts the computer

  Has been notified of an automatic update, so I clicked on install.  An update was IE8.  Don't know what the other was.

  At one point, the update indicated that it needed to restart the computer to complete the update.
  Computer turns off and when he started upward, the following text appeared:

  Configuring updates stage 3 of 3 0% complete
  Do not turn off your computer

  It remained for about 5-10 seconds while the computer off.
  It's now an infinite loop which he can't seem to escape.

  I tried to reboot in safe mode and command mode prompt secure, but it keeps on rebooting over and over again.  Update supposedly created a restore point, but I can't restore.

  http://support.Microsoft.com/kb/949358 does not work because the computer still restarts when starting in safe mode.

  Now that?

  Was able to borrow a Vista CD and get to a restore point. It seems that perhaps the only way to recover because no security Modes allowed Windows to come. Next computer will be Linux!

• Firefox unresponsive after restarting my computer after having made changes in the settings of the history and cookies

  I have some changes to cookies and erased my story for today... and then restarted my computer... now that firefox does not open... will not respond... should I uninstall firefox and then reinstall?

  If I uninstall firefox will be reversed the changes I made with cookies and my story?

  If I was to uninstall and reinstall firefox will lose my bookmarks if I do this? or firefox remembers them... so when I reinstall the previous bookmark is too reinstalled?

  Is - this Firefox starts when you open first after the computer restarts, but crashes the next time that you try to start? If Yes, then there is a bug in Firefox 29 where Firefox crashes out when the parameter ' delete history closing Firefox "is selected, so that you get an error" running but not responding do not "next time you ttry to launch. In this case, end the firefox.exe process in Windows Task Manager (or restart the computer) and then reset your Firefox Privacy options and UNCHECK the option «Clear history of Firefox closing» See this article for more details:
  Privacy, historical settings of navigation and-no-track

  If this isn't the problem and Firefox still open even after restarting the computer, then try to boot mode safe of Firefox by holding down the SHIFT key when you start Firefox. If Firefox starts then read Troubleshooting extensions, themes and problems of hardware acceleration to resolve common Firefox problems to narrow down the cause.

• Update of the program says that a previous update needs the computer to restart the computer prior to installation.

  Original title : My system keeps thinking there is a update it needs to close and restart to. No way to get rid of this problem?

  I'm trying to upgrade a program on my computer, it I get a message that an another update has been installed and to restart the computer to complete the update to previous, but there is no previous updates.

  Also if I have "Automatic updates" on, the window keeps popping up that I have to restart my computer to complete the update, but after restarting the computer 10 to 20 times, the message from computer restart keeps coming back.  I had to disable "Automatic updates" in order to get the work done.

  I have enabled updates 'automatic' and off several times, rebooted the computer several times.

  I'm trying to update Internet Explorer 6 with Internet Explorer 8.

  I have not installed anything new recently except the automatic updates, Microsoft sends through.

  I tried to use this link, but it must go through the process that is blocked.  He also wanted to restart me the computer and try again.  http://support.Microsoft.com/kb/906602

  See: http://support.microsoft.com/kb/948065

• Windows Update cannot currently check the update, because the service does not work, you may need to restart your computer

  My computer stops the update via WIndows Update Component

  Whenever a try to do the manual update using this component I get the message;   * Windows Update cannot currently check the update, because the service does not work, you may need to restart your computer *...

  My computer has a few updates, but can not run these update

  Whenever I try to run computer shotdown/updates remain frozen for a while and stops without updating

  He starts to run updates 1 of 13... and stops

  If I shutdown normal e, computer stay likehanging 1 hour without stopping.

  I would like to know how to solve this problem

  Thank you

  Concerning

  Gladmar.

  Hello

  Were there any changes made on the computer before the show?

  Perform the following methods and check:

  Method 1:

  I suggest you to check if you are able to access Windows Update service and ensure that the following services are started. If it is not started, follow these steps:

  a. click Start, type services.msc and press enter.
  b. search Windows Update.
  c. right-click on the service and select Properties.
  d. in type of startup, select enable.
  e. click Start under the Service status.
  f. click OK.
  g. Repeat steps c to f for the following services:

  Background Intelligent Transfer Service
  Cryptographic services

  If the steps do not help to solve the problem, you can go ahead with the methods mentioned below and check.

  Method 2:

  How to reset the Windows Update components?
  http://support.Microsoft.com/kb/971058

  Method 3:

  Your anti-virus software is in conflict with Windows updates. You can test this by temporarily disabling your antivirus:

  Disable the antivirus software
  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 4:

  The problem with Microsoft Windows Update is not working

  http://support.Microsoft.com/mats/windows_update/

  See also:

  Troubleshoot problems with installing updates
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

  Updates: frequently asked questions

  
  http://Windows.Microsoft.com/en-us/Windows-Vista/updates-frequently-asked-questions

  I hope this helps.

• Error message "WIndows cannot currently check the updates, because the service is not running, you may need to restart your computer.

  Error message "WIndows cannot currently check the updates, because the service is not running, you may need to restart your computer.

  I am currently using windows 32 bit vist

  I rebooted, I changed the settings, I don't have a file called window update service in the service section to stop and start, I tried the fix programs, I'm out of ideas and I need help!

  Suggestions?

  Hello

  1. have you made changes on the computer before this problem?

  2. which antivirus app do you use?

  I suggest you try these methods and check.

  Method 1:

  Anti-virus software may conflict with Windows Update. You can temporary disable them and check the issue.

  Disable the antivirus software
  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software
  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 2:
  How to reset the Windows Update components?
  http://support.Microsoft.com/kb/971058
  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following article:
  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry

  Method 3: If the methods above do not help, I suggest you delete the edb.log file and check if that helps.

  Follow these steps:

  a. click the Start button, click computer.

  b. now, go to this site: C:\windows\softwaredistribution\datastore\logs\edb.log
  Where 'C' is the drive of operating system
  c. delete the log file, and then restart the computer and check the issue.

• Can't get updates for Windows, "Windows Update cannot currently check for updates, because the service is not running." You may need. "" Restart your computer.

  When I try to install the updates I receive the message "Windows Update cannot currently check for updates, because the service is not running."  You may need. "" Restart your computer,   It does not also. check me the update history

  Hello

  1. you made any hardware or software changes the computer recently?

  2. What is the number of update?

  3. do you get this message for all the updates?

  Follow these methods and check if that helps:

  Method 1:

  Step 1.

  Unplug all external devices, restart the computer, and then try to install updates.

  Step 2:

  I suggest that you follow the steps mentioned and try to start the Windows update service.

  Check if the following services are running.

  (a) Background Intelligent Transfer Service

  (b) cryptographic Service

  (c) Windows Update

  (d) Windows Installer

  a. Click Start, type "services.msc" (without the quotes) and press ENTER.

  b. double-click the service name in the Services list.

  c. under the general tab, next to startup type, make sure that automatic is selected.

  d. If the service is not already running, under Service status, click Start and then click OK.

  e. once the services are started and defined as running, try to install the updates and check.

  Method 2.

  You can follow the steps in this article: http://support.microsoft.com/kb/2509997

  Warning check disk.

  Important: All by performing the check disk on the hard drive if bad sectors are found then check disk try to repair this area, all available data on this sector can be lost.

  Registry warning

  To do: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756/)

  How to back up and restore the registry in Windows

  See also: the problems with installing updates

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

• Error: Files needed to display video are not installed or do not work properly. Restart WMC, or restart the computer

  Original title: windows media center

  I have reinstall Win 7 and finally managed to the precious WMC got the signal, channels, etc., but when I select all the channels I get this: "the files needed to display video are not installed or do not work properly. Restart WMC, or restart the computer. "I have resource disc and have re-install the drivers and utilities to the best of my limited knowledge. Help, please

  When I type in run in the start search box, it only pulls up "run programs for previous versions of windows" I can't run your steps without responding to this prompt.  What should I do if I can't follow your steps as you put it?

• My mac has crashed and need to transfer the app to another computer.

  My mac has crashed and need to transfer the app to another computer. How do I do that?

  You do not transfer, you are doing a new installation

  You install exactly in the same way you did the 1st time... Put your disc in the drive, and enter your serial number when asked

  .

  Download & install instructions https://forums.adobe.com/thread/2003339 can help

  -includes a way to go to a page to download the Adobe programs if you do not have a disk or drive

  -Cloud desktop http://helpx.adobe.com/creative-cloud/help/creative-cloud-desktop.html

  -Cloud Getting Started https://helpx.adobe.com/creative-cloud.html

  -you will need to enter your original serial number during the installation for non-Cloud programs

  - or kglad links in response to #1 here can help https://forums.adobe.com/thread/2081216

  Also go to https://forums.adobe.com/community/creative_cloud/creative_cloud_faq

  Cloud license allows 2 activations http://www.adobe.com/legal/licenses-terms.html

  -Install on a 2nd computer http://forums.adobe.com/thread/1452292?tstart=0

  -https://helpx.adobe.com/creative-cloud/help/sign-in-out-activate-apps.html

  -Windows or Mac has no importance... 2 on the same operating system or 1 on each

  -Two activations on one account CAN NOT be used at the same time (to be noted in the link above of the license)

  Remove the license on a computer http://forums.adobe.com/thread/1442423?tstart=0 clouds can help

  -read http://helpx.adobe.com/x-productkb/policy-pricing/error-maxium-acitvation-exceeded.html

  -or https://helpx.adobe.com/x-productkb/policy-pricing/activate-deactivate-products.html

• Wireless zero configuration does not start automatically. I need to run it whenever I restart the computer

  Wireless zero configuration does not start automatically.i have to start whenever I restart the computer. I have a laptop dell inspiron

  Moved from feedback

  Original title: WiFi

  Hello

  1. what version of Windows is installed on the computer?

  2. is it works much earlier?

  3 have there been recent changes made on the computer before the show?

  To activate the Configuration service automatic wireless so it starts automatically, click the Start button. Select settings , then select Control Panel.

  If you use Windows XP display, select the performance and Maintenance category, and then select Administrative Tools.

  If you use Classic view, and then select Administrative Tools. In the left pane, click the Services icon. Click the automatic Wireless Configuration icon in the right pane, and change the box Startup Type to Automatic.

  This parameter will be defined the service starts automatically at boot time. Then click on the Start button to start the Wireless Auto Configuration service zero wireless and click on the OK button.

  The automatic Wireless Configuration can also be started and stopped from a command prompt.

  To start the automatic Wireless Configuration, run the following command:

  net start wzcsvc

  To stop the automatic Wireless Configuration, run the following command:

  net stop wzcsvc

  For more information, see the link.

  Wireless Zero Configuration Reference

  Please post back with the results and we will be happy to help you further.

• I downloaded a Vista Service pack update. Upon restart, the computer crashes upward on the screen:! 0xc0190036! 2348/48738 (fusion.d11)

  I was invited by what looked like a legitimate update notification.  After update, it asked me to restart the computer.  The computer hangs above the screen.  I tried Start Up repair without result.

  Alton

  Hi AltonChewning,

  Please see the following thread similar with a possible fix:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_other-windows_update/Windows-Vista-SP2-installation-error-loop-x64/a1234293-0fc5-4688-8e2a-9229b3ebe365?page=1

  I hope this helps!