Installation of the automatic update continuously restarts the computer

Similar Questions

• After what seems a successful installation of KB2604111, automatic update continues repeatedly to request this update until it is ready for download.

  Successful installation message appears after installation.  KB2604111 also appears in Add/Remove programs in Control Panel.  So why the feature automatic updates keep asking to download?

  Hello

  I suggest you follow the steps mentioned in this article.

  Troubleshooting Windows Update or Microsoft Update when you are repeatedly offered an update
  http://support.Microsoft.com/kb/910339

• Automatic updates continually asks me to re - install; KB2518864, KB2572067, KB2539631, KB2572073, after I have already installed these over time?

  Automatic updates continually asks me to re - install; KB2518864, KB2572067, KB2539631, KB2572073 after I have already installed these updates several times? Registry of uninstalled, rebooted, cleared, tried everything but bubble gum?

  Found on road dead

  Hello

  The following article might be useful: How to troubleshoot Windows Update or Microsoft Update when you are repeatedly offered an update

• Help the clean installation of Windows 7 Pro and using the GPO to run automatic updates and restart all night

  I am trying to solve a problem that will probably require a new installation of Windows 7 Professional 64-bit. The grace period ends in 3 days, and the next 30 days are final exams at the College. I have 2 licenses (and product key) of Windows 7 Pro, but my drive HARD goes wrong and I don't want to use MAK activation. I will be eventually to replace the disk, but is now bad timing.

  If a reinstall is needed, I was going to ask if anyone knows how to set the strategy of perhaps a GPO where Windows is updated automatically in the background and after installing updates, 45 or 60 minutes, then restart. The goal would be to have a computer fully patched when I wake up in the morning.

  This is my plan:

  Install Windows 7 Pro SP1 64 bit > Windows automatically updated and plug the Ethernet cable > define a GPO where the computer waiting for 45 to 60 minutes after installation of updates (so the msi may end in the background, and I do not interrupt the installation) > the PC will restart > more update swill be downloaded and installed > wait due to the policy of GPO before reboot > Reboot > do it until it's over. > wake up with a PC fully patched 7-9 hours later.

  Is this a workable plan?, and if so, how do I define policies such as delay restarting, etc. to achieve?

  The reset did not work. It would be a simple solution. I have a valid license, but I don't want to replace the HARD drive until after final exams are over, so I'll reinstall and activate. I try to achieve in the next 24 hours, so it doesn't keep me from my school work.  I must also support and will then replace my files.

  Feel free to advanced used terminology. I have some experience.

  Any help is greatly appreciated!

  Another question: should I install a security suite before all updates being installed more than 12 hours, or wait until later? What is the level of risk?

  Anyone used Ninite to automate the installation of other programs? Is how safe it?

  Thank you!

  You will have to go on Support of Windows 7 forums on the following link to help solve your problem: http://social.technet.microsoft.com/Forums/en/category/w7itpro/

• After the update and restart my computer was like a whole new vista version and the version of office business. All files and emails and contacts and other programs have disappeared!

  I did a system restore to run today.  He had updated 8 minutes before all this happened, but I couldn't say what update caused this.  It's important, so I guess that vista.  All of my Web site and software adobe software for forms and emails, files, photos, everything disappeared as if today, I bought the computer Office exccept was there, but empty. I have even been asked to set up an e-mail account.  I don't know how it happened with an update and cannot lose another day to such a waste of time. I work and am finishing my doctorate so the stability of my work being it is quite serious.  How this happened and how can I keep it doesn't happen. I backup to carbonite.com and have now checked, contacts, emails by the intermediary of today and all the files, but it's scarYYYYY!   I was never warned or the ability to restart or given in error messages.

  Hi Kelly Barr.

  Welcome to Microsoft answers forums!

  Are you referring to (files, emails, contacts and other programs) shortcuts on the desktop?

  When updates are installed on the computer it says system files, this process of service not Microsoft that are running in the background can conflict with updates and tour damage the system settings.

  This problem can also occur if system files are corrupt.

  Try the following in order to recover the desktop icons.

  Even though the desktop icons disappear, the programs are still installed on computer you can launch them.

  Method 1:

  Ø, right click on the desktop

  O select view

  Ø, click show the desktop icons

  Method 2: Click the Start button > select programs > verify if all the programs installed on the computer display > try to start or right click on the program and Select create a shortcut

  Check the updates that triggered this question go by the date.

  1. Click for Start > Control Panel > Classic view > Windows Update.

  2. along the top, click view update history.

  Before you install updates, follow the precautionary steps listed below.

  Step 1: Disable the security software on the taskbar

  Note: Activate security software once theupdates are installed.

  Step 2: Disconnect external devices like printer and scanner, except the mouse, keyboard, and internet connection.

  Step 3: The clean boot computer:- Perform a clean boot (check step 1 in the link)

  http://support.Microsoft.com/kb/929135 ---> how to solve a problem by performing a clean boot in Windows Vista or in Windows 7

  Important: n ' forget not to put the computer to a normal startup after you install updates. Follow step 7 in the link.

  Try to install updates via windows update or you can also download and install the updates manually by accessing the Microsoft Web site.

  Data backup on the computer

  You can use backup and Restore Center integrated in the operating system to back up data.
  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-and-restore-frequently-asked-questions

  Thanks and greetings
  Ajay K
  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• I downloaded an update and restarted my computer, received the blue screen of death shortly after the computer restarts. Now it does not start

  I don't know when the downloaded update, the computer has been restarted on September 10, 2010 to install updates. Shortlyl once the computer is restarted, I got the blue screen of death.  with the details of error like:

  Stop 0 x 000000050 (0 x 000000000000000, 0xFFFFF88001DCAE4, 0xFFFFF8A00B490027, 0 x 00000000000002) do not know if the number of zeros is exactly right in one of those, but it's super frustrating.

  I tried to restart my computer in repair as recommended (get blue screen of death), I tried to reboot normally, loop just restart procedures asking if I want to restart in repair mode.  I tried SafeMode (BSOD), I tried to restart with last working restart (restart loops), I tried to choose the "Computer repair" BSOD I tried a diagnosis and all past.

  Help!

  Thank you.

  So yes actually hear nothing helped me.  Seems that, given that the computer is not stopped correctly and my hard drive was not recognized there starting the cycle upward or give me the BSOD.  Put it in my Ubuntu CD spare which I've had since my last PC hard drive became corrupt and force back across my hard drive.  After doing this, I was able to do a boot repair, who led for the BSOD.  Not sure how that actually fixed, lost about 10 hours of my day.  So I guess I can chalk up to Microsoft and a reminder on why I should buy Mac for now on... an update shouldn't really cause such problems.

  I get that not everyone has the same PC, so it is difficult to tell if an update is bad, but he should not do this and if an update is the cause of a certain segment of consumers who are updating must be taken down for everyone, or at least the users with the configuration that is known to have problems with an update.

  Problem is solved, had to go back to a previous version of good boot where I have not install updates again.  Now, I'm trying to understand who was was bad, so I can leave my computer knows to ignore.

  Nice day.

  Just in case someone needs to know how to use Ubuntu to back up files on their PC that does not load windows, please see the link below:

  http://www.howtogeek.com/HOWTO/Windows-Vista/use-Ubuntu-Live-CD-to-backup-files-from-your-dead-Windows-computer/

• After race updates and restarted, lock computer and shows the other user logon

  Original title: another problem user in vista

  IM locked out of my computer and shows another user login that won't let me log on what can I do? running windows vista Home premium and all reinstalled today worked very well until after the execution of updates and when I rebooted I'm now locked out of my entire system F8 does not work yet

  Hi Michael,

  If you experience problems after installing updates, you can read the following article and try the steps.

  The update is not installed successfully, you receive a message, and the computer restarts when you try to install an update in Windows Vista and Windows 7

  Hope this information is useful.

• Automatic updates continually do not install

  the update has started very well, but was murdered on stage three for a few days. the computer continues to restart on every two seconds, but remains always on the third stage.

  I tried to stop restarting the computer snd it but the same screen comes up. It does not allow me to go to the main screen, or the sign in screen

  Please help someone, it's not my computer and I don't know what to do

  The update is not installed successfully, you receive a message, and the computer restarts when you try to install an update in Windows Vista
  http://support.Microsoft.com/kb/949358

  When you try to install an update from Windows Update on a computer that is running Windows Vista, you may receive the following message: Configuring updates step 3 of 3. 0% complete
  After you receive this message, the computer returns to the screen that displays the same message. In addition, the update is not installed successfully, and the computer restarts.

  I guess that in this case, we can write about "Vista".

  TaurArian [MVP] 2005-2010 - Update Services

• Automatic updates continue to not settle

  I have windows vista Home premium on my computer. The following updates will not be installed.
  Updates for windows live sign in Assistant (KB967912)
  Updates for 2007 microsoft office systems (KB967742)

  I have turned on automatic updates. Whenever I get ready to close, he's trying to install these updates. Also these days here in the middle of a program, I will get a mssage saying internet explore has stopped working and it closes the program. Are there problems with internet explorer 8. I noticed that my system stops working a lot since I downloaded that and many times I have to use the Task Manager to get out of a program.

  Hi Dianebe1,
  Thank you for visiting the Microsoft Answers forum.
  I would have recommended to do the following:

  STEP 1
  ------------
  Download and install the latest version of Windows Installer
  To install the latest Windows Installer, visit the Microsoft Web site at the following address:
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=5A58B56F-60B6-4412-95B9-54D056D6F9F4&displaylang=en

  Step 2
  ------------
  Cleanup, utility to download and install the Microsoft Windows CleanUp utility. To do this, see the Microsoft Web site: http://download.microsoft.com/download/e/9/d/e9d80355-7ab4-45b8-80e8-983a48d5e1bd/msicuu2.exe

  Step 3
  ------------
  Use the (SFC.exe) System File Checker tool to determine which file is causing the problem and then replace the file. To do this, follow these steps:

  1. Open an elevated command prompt. To do this, click Start, click principally made programs, Accessories, right-click guest, and then click run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click allow.
  2. Type the following command and press ENTER:
     sfc/scannow

     The sfc/scannow command analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions.

  If you receive a message saying that the found sakhi corrutions copy the message and post back please.

  Martin
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• How to upgrade KB911895 than my automatic update continues to send me. I get a code error 0 x 80070643

  The automatic update sent two updates to do.  I tried several times and it comes up saying: filter (KB911895) did not pass tests Windows Logo to verify its compatibility with Windows XP.   So I went to Update.microsoft.com; Fix for the technical problems of Microsoft Update; and on a site that Microsoft told me to go, to get the last system update.  And a little more.  I don't care if it's updated, but I want that he stop sending me the update, where I have this yellow shield in the bottom right of my screen.  I don't know that always be there, if there is an update I have to do and every time I click on it to see... these two updates with the same titles developed.  Don't know what else to do.

  I had my PC cleaned and passed by the technicians to Office Max and was also something they called "Push" is added in order to make my computer faster.  I don't know if this has anything to do with it, but it's the only different thing that was done to my computer in 2 or 3 years.

  Hello

  You can run the fix it link and check if this may help: you receive the error 0 x 80070643, error code 0 x 643 or updates may be offered again when you try to install .NET Framework updates when you use Windows Update or Microsoft Updates: http://support.microsoft.com/kb/976982

• How can I disable Firefox start automatically when I restart my computer

  When I restart my computer (MacBook Pro), Firefox (18.0.2) automatically starts up.

  Try: https://discussions.apple.com/thread/3700060?start=0 & tstart = 0

  Control-click the Dock icon and uncheck 'open the connection '.

• Change the installation location of automatic update

  Hello

  First of all thanks for reading the post.

  The problem that I am facing is that after that put in automatic day is over, they are installed to the C:\ drive but in drive F:\ which is empty and must be used for Linux.

  The fact is that before I formatted my PC, updates have been installed to drive F:\ only. I don't want no other than the C:\ drive for Windows installations. Help, please.

  Config. : Windows XP Pro SP2

  Kind regards

  xploreraj

  By default, the installer will download to

  %windir%\SoftwareDistribution\Download<=this>

  (e.g. C:\Windows\SoftwareDistribution\Download)

  Over time, the files in this folder will be 'age' & should be deleted automatically. Removal of the contents of this folder manually has no untoward effect (other than the fact that an installer will be downloaded again if you need to reinstall the update for some reason any).

  Now, you download SP3 and all post-SP3 installed updates as soon as POSSIBLE. After you have done so, you can see this discussion: http://aumha.net/viewtopic.php?f=62&t=33827

• I have windows xp home edition. Last week after windows automatic update and restart, I lost the logo of the user on the Welcome screen.

  The right side of the Welcome screen is just completely empty.  No logo user, I can't in my computer normally.  I found, I could get around this by Ctrl alt del, but this makes me as a 'guest' and I can't access all the controls or updated windows help, which apparently requires the user administrator status.  How do I trouble this mess and get my normal connection?

  GOOSE,
  Here is the information on the Safe Mode.  Here is the information on the login for the administrator .  I hope this helps. Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• When I tried to re install Windows XP, I received an "unexpected error" at the end of the installation. The computer then restarts and it gives me the error again.

  Hello

  I did a clean install on winxp pro, it ended by an "unexpected error", it will not install, shows me the error and restart try to reinstall and same error. I checked around and it could be due to the intallation disk which was scratched and unable to read the files (I tried the disk image and failed). I made a copy of the disc as soon as possible, but it is bootable. I tried putting in the cd copied, tried to locate the file but could not (don't kn OW the drive and folder).

  Is there a way to make the copy bootable cd? (in my pc, I made a copy of the Setup disk) or is it all the same to overcome this obstacle?

  Thanks in advance.

  Richard

  original title: clean install went wrong

  Hello

  What is the full and exact error message?

  Read the following article.
  Error message "an unexpected error has occurred (536821760)" when you try to install Windows XP
  http://support.Microsoft.com/kb/316400

• Since the automatic update, I can't computer to work outside of Safe Mode.

  original title: my pc had recently updated Automatic

  and now I can't return to windows vista service pack 2, I can use my pc on safe mode or safe mode with network, but it cannot operate in any normal, please notify

  How to uninstall Windows Vista service packs as a troubleshooting step
  http://support.Microsoft.com/kb/948537

  Learn how to install Windows Vista Service Pack 2 (SP2)
  http://windowshelp.Microsoft.com/Windows/en-GB/help/105f7420-6f7f-4FE8-8698-2f40ca5f53711033.mspx