Not loadable VI when inserting GetPropertyValue

Similar Questions

• C50-B-15Z satellite does not recognize discs when inserted

  Toshiba Satellite C50-B-15Z
  Hello! Pls my Satellite C50-B-15Z newly purchased does not recognize discs when inserted. It dosent play any CD or DVD drive, or it even recognize it at all. Pls help... What should I do?

  Original Win8.1 is installed on your machine?
  Have you tested the feature with different CD and DVD, DVD (original)?

• CD/DVD does not auto play when inserted in the drive

  original title: AutoPlay does not work

  no media auto play when inserted in any drive.

  no media auto play when inserted in any drive.

  =========================================================
  Perhaps the following goods range offers a few ideas:

  Windows 7: Troubleshoot AutoPlay
  http://Windows.Microsoft.com/en-us/Windows7/Troubleshoot-AutoPlay-problems

  Windows 7 - change settings for importing pictures and videos
  http://Windows.Microsoft.com/en-us/Windows7/change-settings-for-importing-pictures-and-videos

  Windows 7: AutoPlay: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows7/AutoPlay-frequently-asked-questions

  How to set up the automatic run settings in Windows 7
  http://www.techtalkz.com/Windows-7/516004-how-configure-AutoPlay-settings-Windows-7-a.html

• powerdvx is not read disc when inserted in the dvd player

  message reads no disc is not inserted when the disc is actually. I played several bootleg videos, I inadvertently damaged the eye of reading?

  The following links may be worth a visit:

  (982116) your CD or DVD drive is missing
  or is not recognized by Windows or other programs
  http://support.Microsoft.com/kb/982116
  (Windows XP / Windows Vista / Windows 7)

  Your CD or DVD drive cannot read or write media
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

• BlackBerry Smartphones SD card does not click in when inserting

  Hi, I just bought a san disk 16 GB micro-sd scard. I tried threading, (with the face of metal rods until you look at the screen). He slips but doesn't click in place, instead it comes out back unless I close the lid. It's not set up no matter what message detetecting say it's anything either. What is going on?

  Intrigued-

  I'm puzzled. You have posted in 9700 model section and does not state, that you had a 9000, then it was quite obvious that you have a 9700.

  But since you now that you have a 9000 "BOLD", the SIM card is insertedwith a press hard in the unit. Yes, you might think that you're going to push too hard.

  9000 SIM card is inserted in the side of the unit, and you don't have to press hard, Gold contacts facing the front.

  operating instructions shown here:

  http://www.blackberrytune.com/how-to-insert-media-card-into-BlackBerry/

  9700 Media card is inserted in the back of the unit, above the stack, the Gold contacts down, away from you, the contacts towards the screen, indications are here:

  http://www.blackberrytune.com/how-to-insert-media-card-into-BlackBerry/

  Good luck.

• table name not valid error when inserting values into a table

  I use the following statement to insert values into a table:
  
  curs. Execute ("INSERT INTO _ * '%s' * _ VALUES ((SELECT MAX (REC_ID) + 1 OF GSAP_MSG_IN), (SELECT MAX (gsap_msg_id) + 1 OF GSAP_MSG_IN), 'SHELLSAP', sysdate, '%s', EMPTY_BLOB(), 1, SYSDATE, EMPTY_BLOB (), SYSDATE)" %(*table_name*,file_extension)) ")
  
  whence table_name the following statement
  
  table_name = ' config.staging_db_tablesNames ['in_msgs]
  
  as I created a configuration file for all parameters that can change. The value of the table in the audit using a print command is correctly, but when put in the query above to run the insert statement gives an error. The following is the summary of comprehensive performance where you can see the table name as
  
  $ python gsapscnr.py
  Vote for the data files in/home/mh/inbox /...
  
  GSAP_MSG_IN
  Traceback (most recent call changed):
  File "gsapscnr.py", line 147, in it?
  poll_for_data()
  File "gsapscnr.py", line 86, in poll_for_data
  Sorter = load_details_first)
  File "gsapscnr.py", line 42, survey
  curs. Execute ("INSERT INTO '%s' VALUES ((SELECT MAX (REC_ID) + 1 OF GSAP_MSG_IN), (SELECT MAX (gsap_msg_id) + 1 OF GSAP_MSG_IN), 'SHELLSAP', sysdate, '%s', EMPTY_BLOB(), 1, SYSDATE, EMPTY_BLOB (), SYSDATE)" %(table_name,file_extension)) ")
  cx_Oracle.DatabaseError: ORA-00903: invalid table name
  
  Can anyone help with this problem please. I'm passing the value of the table in a bad way. Also if anyone can suggest a good tutorial for paythong programming using cx_Oracle.
  
  Concerning

  Print the SQL string that you establish, cut and paste it this output in SQL * more and see if it runs. This may show you that you should remove the single quotes around the name of the table %s in the Python file.

• Not loadable VI

  Hi all

  I recently inherited an application of LV, which was compiled using LabVIEW 7.0; the machines that we currently are running LabVIEW 2010.

  I get the standard "VI is not loadable" message when you try to load one of the subVIs and I suspect that the first reason, she suggests is correct;

  «In an application built, this error may occur because the VI loading was last updated for another OS, in which case you must save the VI on the current platform.»

  I searched the forums and cannot find how I can save the VI on the current platform if I'm unable to open.

  I must acquire LabVIEW 7.0 and open/save again with who?  Or am I missing something?

  Best regards

  Peter

  You get this error if the VI has been saved with no block diagram, which you can do via a backup with Options. If there is no block diagram LabVIEW can recompile the VI. You need to get the original VI with the block diagram or guess what he does and re-create yourself.

• drive CD shows autoplay, autoplay shows cd drive, but does not open automatically when the cd or dvd is inserted

  drive CD shows autoplay, but does not open automatically when the cd or dvd is inserted

  original title: Watch autoplay cd player

  OK, got cha.
  Try this:

  http://Windows.Microsoft.com/en-us/Windows-Vista/Change-AutoPlay-settings
  b Eddie

• My CD and DVD players no longer appear when I choose 'My Computer' and that they do not recognize any disk inserted.

  My CD and DVD players no longer appear when I choose 'My Computer' and that they do not recognize any disk inserted. Did this happen when I had an update Windows online? Or a security update? How can I repair quickly and get back in the business? These drives came with my Dell Pentium 4 computer and are not external drives, by the way. And how can I keep it doesn't happen?

  Hello old gal,

  Thank you for your message.  Please visit the following link, there is a fix - it tool that should solve your problem.
  http://support.Microsoft.com/kb/314060/en-us/
  We can't wait to hear back on your part.
  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• have windows vista and it does not recognize a blank cd - r when inserted

  I have windows vista and it does not recognize a blank cd - r when inserted. I think that it is the drive d. I then put a cd - r with music on it and it does not even recognize them. When I put a game disc in there he reads very well. What is the problem?

  Hello

  Thank you for writing to Microsoft Communities. From your problem description, I understand that you are unable to read CD - r discs on the computer. Please correct me if I misunderstood.

  1. What is the brand and model of the DVD player?

  2. you get any error message?

  3 have there been recent changes to the computer before the show?

  Please go ahead and follow the steps mentioned below and later a update on the State of the question.

  Method 1: Your CD or DVD drive cannot read or write media

  http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us

  Method 2: Your CD or DVD drive is missing or is not recognized by Windows or other programs:

  http://support.Microsoft.com/kb/314060

  Please follow these recommended steps and post if you still experience the problem.

• Computer does not recognize the discs when inserted in my D: and E: drives.

  Original title: DISK DRIVES D AND E . Do NOT WORK

  When I insert a blank disc in my drives .He is not found by my computer.could would it be a disc that I need to update? or is their another way I can get it going again until a few weeks ago running good, I ultimate.32 bit .is their a scan from windows vista I can do to find what reader needs to update it please help.

  Hello

  It is not unusual for the same problem have an impact on both drives, in fact, is planned.

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Re: DVD of the (optical) drive cannot read a disc when inserted.

  Hello everyone.

  MY DVD drive can not read a disc when inserted.

  When I check the Device Manager, it has the following against the optical drive error message:

  "Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19) »

  How can I solve this problem and fix it for free if possible? Download a patch from the website of toshiba?

  Your help is greatly appreciated.

  Mark

  See also http://support.microsoft.com/kb/314060/en-us and post comments.

• My Windows Media Player does not automatically recognize when a disc is placed in the disc drive.

  My windows media player does not automatically recognize when a disc is placed in the disc drive. I have to put the disc in the disc drive, and then close windows media player, with the disc in the disc drive already, then re-open windows media player. Reopened WMP with the disc in the disc drive, it recognizes the disc in the drive. It then functions well until I need to change the disk at this time I have to start the reboot stop of WMP. This problem has not allways exists just started a few months ago. Thanks for any helpful information.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  http://support.Microsoft.com/kb/982116

  In addition,

  When you insert a CD or a DVD, Windows Vista may not recognize the disc

  http://support.Microsoft.com/kb/939052

• How to choose a program to open my photos when inserting my SD card? as it doesn't give me options of this program to use differently than before, why, I don't know, so any help would be appreciated.

  How to choose a program to open my photos when inserting my SD card because it does not give me options of this program to use differently than before, why, I don't know, so any help would be appreciated.

  I know what it is, and I'm trying to answer it... will keep you posted
  your original question in a forum of Vista.

  OK... you are running XP and your computer has a media player you
  Insert the card in?

  If you go to... Start / my computer... There should be one or more readers
  listed as... Removable Disk... These are the slots of the media player.

  If you right click on the removable disk representative the memory card
  and in the menu... Choose... Properties / Autoplay tab and open the fall
  window and select pictures. And... ICT... "ask me each time to choose
  an action "." Maybe this will restore the AutoPlay window when you insert
  the map.

  You could also try... on the left by clicking on the button "Restore default settings" / apply / OK.

  And it may be worth trying to run the AutoPlay Repair Wizard.

  Download the Microsoft Autoplay Repair Wizard:
  http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=2648

• My usb ports and cd/dvd drive will be does not automatically start when everything is connected on the

  My usb ports and cd/dvd player will not automatically start when something is plugged on them have to start manually.

  Hello

  · Do you remember all the recent changes on the computer before the show?

  · What is the service pack installed?

  Follow method 2 in the link below and check if AutoPlay is enabled, a link: AutoRun feature or the AutoPlay feature does not work when you insert a CD-ROM into the CD drive: http://support.microsoft.com/kb/330135

  I suggest to fix the AutoPlay parameter by downloading the file below and check the results: AutoPlay Repair Wizard: http://www.microsoft.com/downloads/en/details.aspx?familyid=C680A7B6-E8FA-45C4-A171-1B389CFACDAD&displaylang=en