Damage to the battery of the BT on Portege M200?

Similar Questions

• How to get off the Vista of Portege M200?

  Hello

  I inherited Portege M200 from my boss, and he has updated using an external DVD from XP Pro to Vista Ultimate. Slow as a slow thing, very few pilots etc, meant that I am determined to go back to XP Pro.
  I (128, 1 Gig and 2 gig options) SD cards and USB HP dvd1040e external drive, and XP Pro Tablet records.

  I tried to select the devices to boot from the toshiba start screen, selecting SD or external DVD, but nothing helped. I changed the boot sequence in the Bios (hit escape and F1 at startup screen spalsh) and tried all combinations. I copied the image file to $TOSFD00.vfd on the SD card.

  I managed to loop the machine, in all configurations, so that I just get support PXE-61 test failure, check cable PXE - MOF existing boot lines agent, then go to the Boot Manager Windows asks me to insert the windows installation disc as winload.exe may be damaged or missing. I removed the drive, checked that the winload.exe is present on the HARD disk, it is, and it is in its original version / size / format the date created.

  Someone at - it a suggestoin which stops me pulling my hair?

  Thank you

  Hello

  If you want to start from the CD or DVD you need a compatible external CD/DVD drive! Without that player you will not be able to reinstall Windows XP from the CD!

  But the boss installed you the Vista operating system by using the external drive. Why you n t use the same drive to reinstall the XP?

  The install form SD card is not possible! And if you want to install the image using the LAN you must configure a server

• delays when writing with the pec in Portege M200

  I face a very obvious slow in exercising the hand writing in tablet mode.
  usually, I write "with a single note" and writing is instantly displayed in normal writing on paper.
  but when I tilt the screen to be in tablet mode, what I write is not displayed unless I finished the whole word, and display is normally extremely slow.
  Although if I tilt the screen to normal laptop mode "with the same session a note" the speed is back to normal.
  Please notify.

  Hello
  I ve tried to simulate your problem with my M200

  I couldn't see a Performance distinction between modes of Tablet PC and the PC Normal.

  Could it be that you´re by using the Tablet PC Modus in battery operation?
  Then of course as a result of the power management the M200 runs slower.

  Good bye

• System restore using the recovery on Portege M200 CD

  Hi, I want to restore my M200 using the provided restore DVD. I have a Toshiba PA345U-1DV2 external USB DVD came with a CD that contains drivers for DOS. The Readme in the back driver's record is in Japanese! I created a boot SD card using the util of Toshiba and added the back drivers in the config.sys file.

  No matter what I try, I can't get the DVD USB boot DOS and so read the restore DVD. I admit that it is driving me crazy. I tried all the options I can find on the net and still no luck. Can anyone help?

  It seems to me that as the DVD drive is Toshiba and has drivers back it should work.

  As far as I know, you need a reader taken supported and compatible to recover form the USB.
  Not every player is compatible! :
  Please check this announcement on compatible drives:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=9291&MessageID=32642

  In this ad, you will find instruction how to recover the operating system on the M200 protected without using the external drive:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=11393&MessageID=41104

  And this announcement provides more interesting information on the recovery of the M200 procedure:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=2798&MessageID=8348

  I hope I could help

• How can I get into the BIOS in Portege M200?

  My bios version is 1.80.
  Build on the work of doesn´t Esc.
  Can you help me?

  Thanks Andreas

  Hello

  Already tried the "del" 'F1' or 'End' keys to enter in the BIOS? Please check this and get back in without success...

  I really want to know if you have found a way in the BIOS. :)

  P.S.: You can also use the HWsetup Windows to change your hardwaresettings, since there are different things but with a graphical user interface.

  See you soon

• Replacing the drive HARD on Portege M200

  I have a Portege M200 with a 40G hard drive. I'm running out of space now.
  Does anyone know the maximum disk compatible with this machine?

  I thought Seagate Momentus 320 g.
  Could someone advise me please?

  Hello

  I read here in the forum about upgrade the HDD on Portege M200 and the guy has updated the 160 GB HARD drive.
  So I guess you could improve the 320 GB HARD drive as well.

  You need a 2.5 IDE HDD and it s any speed would support the HARD drive.

  See you soon

• Damage to the screen from Macbook Pro retina

  Then I found a thread similar to this one.

  But no one seemed to have a definitive answer.

  I have a Macbook Pro 13 "retina 2014 and there is some damage on the screen. Seems to be the transparent layer that is consumed.

  I have used a cleaner Whiteboard which I assume is the question. Is there any difficulty in it and if not how easy/expensive is it to fix?

  

  Call Apple and make no mention of yo trying to clean it up. Products Apple are not guaranteed against this type of damage, unless you bought in a store that offers additional guarantees that apple does not offer.

  Apple provides this document on their cleaning devices and Whiteboard cleaner is not on the list

  Cleaning of your Apple - Apple Support products

  If you have a 3rd party repair not authorized apple, Apple may choose not to offer to solve the problem, even if you offer to pay the rate for the repair.

  Contact Apple is at the bottom of this page

• iPhone5 screen no longer works with no physical damage to, the screen

  Someone at - he had problems with iphone5? This morning my screen stops working. Is no longer able to select icons / password etc... No damage to the screen?

  I had a similar problem yesterday with my iPhone5!  so I ran the forced reboot (hold start and press and hold the button until the Apple appears). but after the reboot (which took a long time) the white screen appeared (such as after an update) and I wanted to check my account information (wifi or so active mobile network needs).

  It seems to be a problem because the 9.3.4 operating system update is available.

  One of the ideas which continues?

• Portege M200 - How can I change the BIOS battery?

  Hallo,

  I have a Portege M200 and I want to change the battery of the BIOS but I don't know where it is!

  Can someone help me?
  Thank you!

  Hello

  The BIOS battery is placed on the motherboard and to exchange it, you must remove a large number of parts and screws. It's a little tricky and that's why you should have experience in laptop disassembly.

  If you want a new battery of the BIOS, you must contact the nearest authorized service provider. Technicians can do for you.

  But why do you want a new battery? The battery will also be charged if you have the AC/DC adapter connected.

  Good bye

• By connecting to Window Vista is errro ' configuration data for this product is damaged contact the support staff.

  1. I get this error before moving on to the windows vista login ' configuration data for this product is damaged contact the support staff "I tried repairing the system by using the Windows disk installation and chkdsk/f/r and none of the steps helped.
  2. on a different vista machine it keeps restarting on before we get to the opening of windows session, I managed to make system repair using the windows disc and he managed to survive but, unfortunately, after a couple of stop and restart, the same problem happens again.

  Kindly help on how I can make these problems disappear.

  Hello

  Method 1: Check to see if you can boot into safe mode. If you can start in safe mode, you can perform the clean boot and test functionality.

  Step 1: Check the functionality of the computer in safe mode.

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  If it works fine, you can check if the problem exists in a clean boot state.

  Step 2: Perform the clean boot.

  http://support.Microsoft.com/kb/929135

  Note: After you check the clean boot feature configure Windows to use a Normal startup using step 7 proposed in the above mentioned link.

  Method 2: If you are unable to boot into safe mode, try to Start the computer using the disk and recovery options, select command prompt, run System File Checker tool.

  How to access the System Recovery Options menu?

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-happened-to-the-recovery-console

  Download link for the tool (SFC.exe) System File Checker.

  http://support.Microsoft.com/kb/929833

  I hope this helps!

• "The file is maybe damaged. The file header checksum does not match the checksum calculated. »

  Hello

  I work with a HP Pavilion a6030n PC with Vista OS base. I had problems with the computer recently when starting. He continues to work at some point during the process and crash, forcing a hard stop. I'm not too computer savvy, but can generally work through questions. I tried several (and probably useless) methods to try to get the computer to work, with a modicum of success. Today, I received this message: "the file is maybe damaged. The file header checksum does not match the checksum calculated. "Hmmm... I looked through the forums and found a lot of computer-speak, who basically told me that I'm over my head. I thought that I would try at least ask the question before resorting to what is the hard drive a person to fix if all goes well.
  I can get it working again, or is my HP to his last breath?
  Thank you!

  If warnings getting You ' r files are corrupted, which could indicate a problem with the hard drive (most likely) or the memory/RAM in the computer (a little less likely but a good possibility).  Your computer came with a disk diagnostic or diagnostic software you can run to test the components inside?  You can also download this software and run it to see if he can help you narrow the possibilities.  Otherwise, I recommend to find a local repairman good and trustworthy and have them check for you if you are not adept at hardware troubleshooting.  It can get very frustrating and very expensive, very quickly.

• Loading error when you try to load the Halo 2 "files are missing or damaged in the installation directory. A few important files required to run this game are missing from the installation directory.

  Original title: load error when you try to load Halo 2

  People at Microsoft, I have a problem trying to load Halo 2 on my dv7 Paviliaon with Vista and the 2.8 GB Intel Centrino 2 processor. When I try and load the game, I get and error stating: "the files are missing or damaged in the installation directory. A few important files required to run this game are missing from the installation directory. "It bothered me for several reasons. One: the disc that I use is an original disc out of the box so hsould have no problem. Two: the game has been loaded previously on the same computer without apparent problem at the time. It has been deleted (don't remember why) and when I tried to reinstall, the error came. Three: I did as recommended and updated all programs and drivers, nothing works. So my question is, how do I reinstall Halo 2 and what this problem will arise if I decide to buy and load Halo 3?

  Thank you for your time in advance.

  Hello

  As you are facing problems with Halo 2, I suggest you to refer the link for better support:

  http://forums.haloonwindowsvista.com/forums/

• My hard drive is damage and the deleted product key sticker how can I reinstall my windows vista if I don't even have a cd/dvd to reinstall?

  How can I install windows vista on a new hard drive?

  I have a toshiba satellite L505D-S5965 my HDD is damage and the deleted product key sticker how can I reinstall my windows vista if I don't even have a cd/dvd to reinstall

  In this case, it is preferable to contact Toshiba support and discuss the issue with them. They may be able to send you DVD.

• My water damage to the title of the experience of the guarantee

  I sometimes gently clean my Z3 with cold tap water to remove traces of fingers. Flaps still not closed, no long exposure and immediately dry with a towel. Must be able to manage, right?

  Last month, a few minutes after having done this, I could see water inside the screen and he stopped responding to touch. I could also see drops of water behind the glass of the camera. After a night in rice with the open shutters, it has not improved.

  For what I was able to study, it seems that the water could get out of a poorly pasted back panel.

  I red a lot of testimonies from people with damage to the water with a Z3, in my opinion, there could be a DESIGN FLAW with the waterproof in the Z3. Check out youtube!

  This story has a happy ending. I sent the phone, which was under warranty, in the service of Sony and they sent me a new unit in a week. Kudos for customer service!

  I think I used to play with the water more, I do not know my phone takes care of everything. Sony made false advertising with their waterproof phones.

  I'm very sorry for the inconvenience that this may cause, but glad to hear that you are happy with our service.

  While I heard of this before in some cases, I can assure you that this is not a general design flaw. It must have been something wrong with your device.

• HP Envy m6: missing screw caused the hinge to be loose and cause damage to the angle of the laptop

  During regular use, the screw top-right; closest to the power plug. a missing and caused damage to the angle of the laptop.  I think that the screw may have gone inside the laptop itsself I heard a rattleing around as I move it, which did not use to be there before.  If the rattle inside is not a problem, so how do I get a new live until the problem gets worse?  I tried Home depot, but they aren't small enoguh live :-/ and best buy does not sell such a thing, that is where I bought my computer since then.

  Here is the Manual:

  Manual

  See page 21. The hinges you need are:

  Display hinges, includes: 720548-001 (2) left and right hinge covers (3) left and right hinges and brackets

  $25 on eBay

  See p. 47 of the manual for the installation on the hinges of the screen instructions.

  You should replace them both while you're there.

  What is the damage that you have described? The hinges cannot fix it so bad a torn anchor points as it came out.

  Screw Kit 720560-001

  $5 on eBay

  Let us know if you need more information.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.