HP Envy m6: missing screw caused the hinge to be loose and cause damage to the angle of the laptop

Similar Questions

• HP ENVY Notebook PC m6: HP Envy does not charge while the laptop is turned on.

  Hello

  Well, I'm having some trouble loading with my HP ENVY. My laptop does not load as I'm with her. It will charge, but it does charge when the laptop is closed and sometimes if it has locked and disabled.  I don't know if it would be the battery or the power supply? Maybe something internally?

  Key points

  * Battery charge does that when the lid is closed (sleep mode). **

  * If I close the lid and plug in the charger, the light indicates orange and the battery will deliver to load almost exhaustive *.

  * If I open the lid before the orange light changing to white, battery icon always says: _ % available (plugged in, does not support). **

  * I tried to waste the battery. I removed the battery and the AC adapter is plugged in. I tried to turn on the laptop or don't put in place *.

  I don't have to replace anything yet. I was hoping to find out if anyone has had this happen to them before.

  Thank you

  Maggie

  Hi there @mdeely,
  
  Welcome to the Forums of HP Support! It's a good place to find the help you need, other users, the HP experts and other members of the support staff. I understand that you have a problem with the battery not charging. I'll be happy to help you.

  Please report the number of complete product from your computer. Check out the following, if you need assistance with this information.
  How can I find my model number or product number?

  When I enter the product number, I'll get the documents to your computer.

• Missing screws in the 3D 2010 image control?

  Hey everybody,

  I tried to follow this guide to the developer for visualization of Labviews functions:

  http://zone.NI.com/DevZone/CDA/tut/p/ID/7664

  I discovered that many screws shown here for 3D picture control are not available for (free) module in Labview 2010, even with the control and simulation tool. What is the case for other users?

  Examples of 3D picture control screws that I can't find in Labview 2010 block diagram functions are:

  'building of toroid.vi '.

  'create model.vi '.

  'Add a material.vi '.

  'Create transform.vi '.

  'Add a model.vi '.

  'create camera.vi '.

  «camera look at.vi»

  'create positional light.vi '.

  "make scene.vi".

  "to scene.vi".

  However, I can find the following screw:

  Geometry menu

  'create cone.vi '.

  'create cylinder.vi '.

  'create box.vi '.

  'create the height field.vi '.

  'create mesh.vi '.

  'create sphere.vi '.

  'create text.vi '.

  Object Menu

  'create object.vi '.

  'find the object.vi '.

  Transformations menu

  "to rotation.vi".

  "set rotation.vi".

  "rotation object.vi.

  "to scale.vi".

  "set scale.vi".

  "Object.vi scale".

  "to translation.vi".

  "set translation.vi".

  "translate object.vi.

  'clear the transformation.vi '.

  Menu of aid

  "color change.vi".

  "configuration window.vi".

  'create a clip plane.vi '.

  'texture.vi '.

  "new light.vi".

  "sensor mapping.vi.

  File loading menu

  «load ASE geometry.vi»

  'load the file.vi vrml ".

  "load STL geometry.vi".

  So my question is why can't I access the first list of the screws in 2010, are hidden with screws again features somehow? Or am I missing a library or where these functions abandoned for the 2010 version? If they have been abandoned, is it possible to build a scene and drawing from scratch in the 2010 version?

  Thank you very much!

  Hello

  Control of the 3D image is natively available for LabVIEW 2010. The question that you are running is because you try to open a VI that uses the first NOR-Labs 3D Picture Control, which was replaced by the native 3D image control. These functions are "obsolete" and manually replace your code with new API of navigation. You can also try using the old Toolbox, but keep in mind that this is not supported:

  http://zone.NI.com/DevZone/CDA/tut/p/ID/4411

  Examples of the new API is located in:

  C:\Program NIUninstaller Instruments\LabVIEW 2010\examples\picture\3D Picture Control

  and you should be able to find most of the VI need to change your old Toolbox to the new.

  I hope this helps...

• Need help to identify the missing screws from the bottom of my 482PG-V7

  Hello, some of my screws fell off my 482PG-V7 and I was trying to identify who they are so that I could buy them online in laptopscrews.com. I tried to search through the online manual for V7-482PG, but I couldn't find the information.

  I have attached a screenshot here - if someone could help me please identify this it would be great, thank you!

  [under the direction of life private - deletion image which displays the serial number].

  M2.5x6mm should be the ones you need.

• ENVY 4500: Lack of scanning for HP ENVY 4500 software after reinstalling the laptop

  Dear support,

  I got a HP ENVY 4500, installed on a laptop with Windows 8.1 and the HP Software scanner worked fine.

  I have recently reinstalled the same laptop but with Windows 10 Pro: the printer works fine but the scanner software HP is not available! I can't use all the features of the printer this way...

  My question is: why the HP scanning software is not available for Windows 10 Pro? I used the original CD.

  Where can I download the (new) 10 Pro software for Windows?

  Please help me solve this problem.

  Kind regards

  Carmine

  Hi all

  now, I have solved my problem: I install the Windows 10 soft "HP Scan and capture" from the Microsoft Store and it works very well with HP ENVY 4500 printer / scanner!

  Concerning

  Carmine

• HP Envy 17-j130: text of the laptop?

  Hello

  I'm not completely sure if this is a good place for this post, but I thought I would give it a shot.

  I recently got my new HP envy and it drives me crazy trying to text from my laptop. I discovered Pinger already downloaded through my applications, but it won't let me use my phone number and contacts. I have apparenly need to use a different number they provide for free and other text?

  in any case, I'm trying to see if there is a simple way to connect my contacts and phone number with my laptop instead of downloading an app and going through that. Basically I ask if there is any type of function that allows this. I also know that Outlook is available but I don't think he uses my phone number at all so if I got a text on my cell phone I don't think that could be notified and I manually add to each contact. Maybe I'm wrong, but that's how I understand it.

  Thank you! Any tips are appreciated.

  Hello

  Your computer laptop doesn't act like a phone so you can't text phone. You must use app and you need a phone number. My test is run with Viber app over the weekend to the text from my computer to my daughter who is in Tokyo with no problems. But even once you need

  (a) your smartphone with an active number,

  (b) download an application (about) and install on your computer (no other choice unless your laptop is also a phone with the right equipment).

  Using your phone, you do not have to pay. I think use their number you will have to pay.

  Kind regards.

• Missing drivers on the laptop HP laptop HP 15-d002au model

  Hi all

  I recently bought a HP laptop that had windows on pre-installed 8.1. Long story short, I got rid of 8.1 and installed 7, but in doing so, I deleted the recovery partition and now I'm missing some drivers.

  Model = HP 15-d002au

  Product = F6C95PA

  Series = [personal information]

  Drivers needed

  PCI DEVICE.                                                                       PCI\VEN_10EC & DEV_5229 & SUBSYS_2192103C & REV_01

  SM BUS CONTROLLER.                                                 PCI\VEN_1022 & DEV_780B & SUBSYS_2192103C & REV_3A

  SERRIAL UNIVERSAL BUS (USB) CONTROLLER.  PCI\VEN_1022 & DEV_7814 & SUBSYS_2192103C & REV_01

  I have search and you have downloaded some that I thought were good but have had no joy yet.

  Any help and assistance would be greatly appreciated

  Thank you

  Karlbear

  Please click on the link below to download and install the drivers

  PCI DEVICE:

  http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1&PNid=15&PFID=25&level=4&Conn=3&DownTypeID=3&GETDOWN=false

  SM BUS CONTROLLER:

  http://www.Dell.com/support/drivers/fr/en/19/driverdetails?DriverID=2128103C

  OR

  http://support.Lenovo.com/en_US/downloads/detail.page?docid=DS030147

  Hope this helps, for other queries in response to the post and feel free to join us again

  * Click on the star of CONGRATULATIONS on the left to say thank you *.

  Make it easier for others to find solutions by checking a response "Accept as Solution" if it solves your problem.

  Thank you

  K N R K

  I work on behalf of HP

• missing screw Aspire E5-473

  Noticed a missing screw on the bottom of the laptop. On the upper left corner. Need help to identify what type of screws to use for replacement

  Hello

  All the screws (x 16) are M2.5x8.0mm:

  • 86.MXRN2.007 - SCREW M2.5xL8.0 D4.6 (head diameter: 4.6 mm)

  You will find here of similar screws (head diameter: 4.5 mm). At the same time, I would look for a new rubber feet.

  Edited: ODD live

• ENVY 750 - 055xt: screw the motherboard for socket mSATA

  I have the HP ENVY 750-055xt, which uses the motherboard of Kaili.  There is a plug on the motherboard mSATA and I inserted an EVO of 850 Samsung 1 TB SSD.  Fortunately this solid state drive works and is immediately recognized by Windows 7, no other frills.  However, the motherboard doesn't have the small screws in the tiny mSATA solid drive on the motherboard.

  Anyone know the right screw size used to secure the mSATA SSD to the motherboard in Kaili?

  Hi Big_Dave,

  Thanks for your reply.  I have besides a picture of the Samsung 850 EVO mSATA SSD drive.

  

  It fits in the slot on my motherboard HP MS-7826 (Kaili) mSATA.  Please see below.

  

  The drive performs as well as my boot drive.  As it is not properly attached to the motherboard, the only thing holding is the strength of tensioning of the socket.  Ocassion the tiny jury comes off in the socket and it won't be visible in the path of startup.  Opening upward the chasis LIKE 750 and re - insert the mSATA jury will get the computer running again.  The little screw would prevent the Council of Regularisez making and the frustration of re-Foundation there.

  Elsewhere in this forum, I found mention of the screw that I'm looking.  This is the same as that used in the dwelling of minimap express PCI used for the WiFi card.  The expertise here source describes the machine screws Flathead as a M1.6 size.  I ordered a M1.6 x 3 mm of China.  I think it should work.  Some here said they used a M2.0 to head flat screws in the slot mSATA and it seemed to work for them.

  My motherboard HP isn't a slot m2.  If so, then I probably would have opted for the Samsung SSD m2, instead of the mSATA SSD drive.

  For now, I think I solved the problem with the mother screw missing for the location of nSATA.  Nevertheless, Big_Dave, thanks for responding to me here.

• Missing screws after installation of the Runtime

  Hello

  I had installed Labview 2015 and created all my screws, then after that it worked, I uninstalled all with labview and installed only the Runtime.

  But now I miss some subvis. "For example NI_AALBase.lvlibtd deviation and Variance.

  It is not any longer on my hard drive.

  So the question is: how should I save my screws that the Subvis are also available after the execution at run time?

  Or what I need to install additional runtime I have all the NOR-Subvis?

  I tried to copy the NI_AALBase.lvlib into the path of my report, but it does not work (I call my Subvi in TestStand.)

  THX

  Hello OnlyOne,

  with drag and drop to my computer or you can add the folder.

  I recommend always using the deployment utility.

  

• Envy of HP dv7: screw of the dv7 HP Envy case

  the screw in the bottom right of the carcass is out and I'm not. need a new. was under warranty and HP wanted me to send the computer back that I couldn't do for a screw. the warranty has expired and the hinge is get stuck the fingers and all the right side of the computer facing the envelope down originally. Anyone know where I can get a screw for this and what is the size? I looked at the manual and it seems to be a 2.5x8.5 as Phillips, but I can't seem to find one anywhere! Please help because my computer will break at some point!

  Thanks for any help!

  @Garden15

  Please use the Forum from HP Support. I brought your question to the team within HP. They are likely to ask for information from you to get your information or product serial number. Please search for a private message from a contact HP identified. Also, remember not to publicly display (numbers series and information).

  If you are not familiar with messaging private forum please click here to learn more.

  Thank you
  Omar

• screws missing from the bottom of the laptop (S3 - 392G)

  Hello

  I have a used s3 - 392 g Acer laptop and I noticed that some of the screws on the bottom are a little loose and it has actually fallen!

  I was wondering where I could get replacement screws? There are many online auction sites, but I'm not sure what I need and I can't find more info online. The screw that I'm missing is one of those on the bottom of the laptop, taking the whole shell. There are 11 of them in total, and is on the right edge of the laptop.

  Thank you!

  Thanks for the photo!

  The missing screw specifications:

  86.2ZR62.6R5 - SCREW M2.0 x L6.5x (L = length) - Qty 8 on the bottom.

  

  The screw located on the other side is exactly the same. You will be able to measure the diameter, the thickness of the head.

• HP Envy Notebook PC left m6 area hinge separating and touchpad problem

  I noticed that the cases on my 3 month old computer was gaping open near the hinge of the left-hand opening and closing of the screen.  I examined the screws from the bottom and noticed that there is a screw missing on the nearest corner of the hinge.  After further consideration, as it seems that the necklace that the head of the screw would be sitting against lacked so that put another screw would not do anything to close the gap.  I had also noticed that the touchpad was so glitch in its operation at times that he has been unsusable and required an external mouse.  I contacted HP through this forum and HP called by email and PM me.  They sent me a box and I sent the computer for them on 3 Oct.  I received an email from their share on the day wherever they received saying that they should have it me 17.  I contacted them to see if the date could be improved and I was assured that the 17th was an automatically generated date and that I get it before that date.  The touchpad has been out of stock and they gave me several dates that came and went and finally got the computer on 24.  Turned on the computer and the device boot saw not found error.  After a few hours of troubleshooting with HP, they determined that the hard drive was bad.  They tried several times to send me a new hard drive and I refused and I wanted to return the computer to them.  I have never replaced a hard drive and you want to start on my new computer.  There is no cd drive and no way to load the operating system on.  There is also no guarantee that the HD is the problem.  They agreed to do the repair.  I told them that I could reuse the box and packing materials and prints a new lable and new ship date.  They said that they do not have a protocol for this and they would have to send another box.  I'm now waiting on the new box and I was without a computer for almost a month.  I will update that takes place the next chapter.

  I just sent you a private message. If you are unsure how to check your messages from the forum, this post has instructions.

• missing text in the button Delete the bookmark.

  There is missing text in the button Delete the bookmark. The key works but the text is missing.

  Here is a screenshot of the problem:
  http://Tinypic.com/view.php?pic=dltkau & s = 8 #. U0rV96KrFEM

  Start Firefox in Safe Mode to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox/tools > Modules > appearance).

  • Do NOT click on the reset button on the startup window Mode without failure.
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

• HP envy 4-1020eb: screw

  In fact, I lost all my screws at the bottom of my laptop. I can't find what kind of screw my laptop has. Anyone know the type? I have a HP envy 4-1020eb.
  
  Kind regards
  
  Saior

  where do you live (country)? You can get a "screw kit" for on any computer laptop on eBay or amazon if delivered to where you live

  It's the HP Ref. for the kit of screws:

  Screw Kit 687098-001

  The service manual indicates the size and type of each screw to chassis:

  Manual

  Even if this is not your model of screw do not change much and this kit would probably all those you need:

  http://www.eBay.com/ITM/486622-001-genuine-original-HP-screw-Kit-all-sizes-included-Pavilion-G60-500-A-/231516156686?hash=item35e770330e:g:Ki4AAOSw - 7RVFHCU

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.