Damaged AS200V files

Similar Questions

• damaged CD - can I copy damaged Internet files?

  I have a windows xp home sp1 upgrade cd and it has damaged some files... is possible to copy the files (which are damaged) from the internet without having to order a new cd?

  Yes.   You can download service packs from Microsoft.  The following Microsoft KB article has links to download SP1a, SP2, and SP3 from Microsoft.  Note that you do not need to install Service Pack 1a.  Installing Service Pack 2 will actually install SP1a and SP2.  Also note that the SP1a or SP2 must be installed before installing SP3.

  "How to obtain the latest Windows XP service pack"
    <>http://support.Microsoft.com/kb/322389 >

  HTH,
  JW

• Defrag damage a file or its folder that had been open and saving the changes?

  BACKGROUND

  ("Work") file, including the file ("History.xls") I opened its doors and mounting and don't save while Disk Defragmenter is running in the background 'disappeared' AFTER that I closed on History.xls and then Defragmenter.

  COMMENTS:

  After the cancellation of defragmentation:

  • All other folders seem to be present. However, it took between 15-30 seconds for them to open the 'first' time.
  • Defrag never stopped, didn't report it was over, or what "improvements", he did. I had to "Cancel".
  • Files was between 15 and 30 seconds to open "Preview".
  • The 'Work' folder was still present in the directory tree display. When I clicked it, however, he was nowhere to be found. Could not display it in the command line or from the administrator command prompt. Just a folder with some of my most valuable files - gone!
  • Defrag has run longer than 24 hours because: 1) the instructions says it could take several hours and 2) he has spent most of the time 'analysis' 3) all other options are grayed out and 4) 'You can still use your computer while the defragmentation process'... Finally, I had enough.
  • To the best of my knowledge, I did not remove the file still less his file.
  • The file or the folder are in the trash.
  • The computer had worked perfectly until I ran Defrag (now its response slow BUT WORSE I get back is no longer a very valuable file).

  Disk capacity HARD and utilization (GB):

  • C:\ = 95.07/239.2 = 39.74%
  • = 12.32/40.02 = 30.78% F:\
  • (two NTFS file systems)

  HARDWARE/OS

  • Dell Inspiron 530 (3 years)
  • MICROPROCESSOR *: Intel processor Core 2 Duo E8300 (2.83 GHz, 1333 MHz FSB) and 6 MB of cache
  • RAM: Memory: 3 GB DDR2 - SDRAM (PC2-6400/800 MHz)
  • BIOS version: 1.0.15
  • OPERATING SYSTEM: Microsoft Windows Vista Home Basic Version 6.0 (build 6002; Service Pack 2)

  Thank you.

  Hello

  Defrag will not damage any file or folder.

  Fragmentation makes your hard drive to do extra work that can slow down your computer. Disk Defragmenter rearranges fragmented data so can work more effectively your hard drive.

  On the disk defragmentation:

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-disk-defragmentation

• On a 32-bit vista business system, what is the right way to recover from a damaged NTLDR file that prevents the system from booting?

  On a 32-bit vista business system, what is the right way to recover from a damaged NTLDR file that prevents the system from booting?

  Also, is there a powerful device filled, utility like Winternals Windows PE boot, I can download for the resolution of problems like this and others?

  Thank you in advance!

  Have you had a glance at this startup repair disk?

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use it.

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  See you soon.

  Mick Murphy - Microsoft partner

• Error: "the file is maybe damaged. the file header does not match the checksum calculated"during the installation of Windows 7/8

  * Original title: Question of re-Installation of operating system.

  I got the message during win 7 / Win 8 installation.

  "the file is maybe damaged. the file header does not match the checksum calculated.

  My config - processor Intel C2D, 2 GB of RAM, Intel motherboard, 500 GB HARD drive

  I have also replace Win 7 DVD and DVD player also replaced.

  I also reinstall my single RAM chip so many times. but the problem still exists.

  During Win XP SP 3 installation, no such message type not displayed. I can install it easily.

  Pls help me Sir, I would like to Win7 in my computer again.

  Hello

  Thanks for posting your query on the Microsoft Community.

  According to the description of the problem, it seems that you are facing the question with the reinstallation of Windows 7 on your computer.

  Because the computer does not recognize the CD - R into the DVD player probably boot order is set to hard drive first. I suggest to change the DVD boot priority in the BIOS and then try to perform the Startup Repair.

  Note: BIOS change / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  In order to make changes in the BIOS, I suggest you to contact the manufacturer of the computer.

  Method 1:

  Unplug all external devices connected to the computer with the exception of the keyboard and mouse and check if the problem persists.

  M odes 2:

  If the problem persists try the Startup Repair. It is one of the recovery tools in the System Recovery Options menu. This set of tools is on your computer's hard disk and on the Windows installation disc. To learn more about Startup Repair , you can refer to the below mentioned article:

  http://Windows.Microsoft.com/en-us/Windows7/Startup-Repair-frequently-asked-questions

  Method 3:

  In addition, if startup repair is not enough, you can perform a system restore, check if it helps you to solve the problem. For reference, you can see the article mentioned below.

  What are the system recovery options in Windows 7?

  http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7

  Note: when you perform the system restore to restore the computer to a previous state, programs and updates that you have installed are removed.

  Hope it would help. If problem persists always post back with the current state of your computer and the result of the proposed suggestion, we will be happy to help you.

  Kind regards

• Muse damaged corrupted file - can it be saved?

  I have a muse damaged, corrupted file and I was wondering if it can be saved? It was fine yesterday, but since my computer was restarted and upgrade to Yosemite, he says that it is damaged.

  Does anyone have any suggestions?

  Sending, please use the .muse file and the file MuseLog.txt of Documents of all the computers that were used to edit the file with a link to this topic for the context. If the file is larger than 20 MB, you can use a service like Adobe SendNow, Dropbox, WeTransfer, etc. (if you use a service, please include your return e-mail address in the body of the message, as no service all enrolling them in the sharing invitation they send.) Thank you.

• My WinXP is damaged-exe files will not open

  Apparently damaged by VJT.exe and my .exe programs will not load or run. I get the 'Open with' box or a file not found. I am able to run the programs with the .com suffix. Please tell me what to do to solve this problem. Is this some sort of file association problem? My AVG antivirus was quarintined VJT.exe.

  Hi Systemwhiz,

  You will need to rename regedit.exe to regedit.com (my computer-> tools-> option-> view file-> remove tickmark to "Hide extension for known file types"-> ok-now right click on local disk C:\WINDOWS\ online search of regedit.exe rename regedit.com).

  Then click on Start-> Run Type &-> Regedit-> ok.

  Go to HKEY_LOCAL_MACHINE\Software\Classes\Exefile\Shell\Open\Command
  (you will have to press on + to achieve order)

  Now, double-click default slot right windows and then change the value in this box for '%1' % *.

  Repeat the same for HKEY_CLASSES_ROOT\Exefile\Shell\Open\Command

  Close regedit, restart your pc and check if its working.

  You can also check: http://support.microsoft.com/kb/310585

  I hope this helps.

• Trojan.ADH.2 cleaned out XP Pro SP3; Suspect that some damaged XP files. Y at - it a utility to check the integrity of the file XP?

  Disconnected PC of the web in order to prevent the spread to other units. Under logon admin school, used current analysis complete AVG, Norton, & System Mechanic Pro & own utilities. Now able to use the main admin connection, however PC remains disconnected from the web.  Nothing I can put my finger, but the PC does not not like before.  Suspect damaged due to XP files by Auger or cleaning utilities.  Y at - there a utility that can check the integrity of the XP removal or is a scrub & charging necessary?

  Hi NoelJohnston,

  ·          What are the issues on the computer after removing the Trojan computer virus?

  I suggest that scan you SFC on the computer that would be a system file corrupt on the computer search and replace.

  The analysis may take some time, so be patient. Windows allows to fix corrupt or missing files it finds. If the information of the installation CD is required to fix the problem, you may be asked to insert your Windows XP installation CD.

  Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)

  http://support.Microsoft.com/kb/310747

• Recovery of missing or damaged Configuration file

  We have a workstation HP xw4400 running Windows XP.  At startup, you get the following message:

  C:\windows\system32\config\system missing or damaged

  We do not have a system CD or restore disk.

  After the message preceding, we can access the window restore.  He gives us two options.  First of all, to save the files, what we do, and secondly to restore the HD.  When you start this process there is a warning that you restore it to its original settings, and that all files, applications, etc. added since then will be lost.

  Given that the backup files are on the hard drive, they will be not lost too?  Or are they stored in a separate partition which is not cleared?

  What is the best way to recover from this situation?

  You must move the backup files to another (internal, external, or CD/DVD) storage device to ensure that they are not lost during the process of recvoery.

  Frank

• Smartphones blackBerry Curve 8900 Device Software for Rogers - DAMAGED Setup FILE

  Hi all

  I was wondering if someone else ran into this problem (if there is no BlackBerry Rogers on this forum). I tried to download and run the software for the device for Rogers out of the BlackBerry and the installation site, I came across the following error message:

  "Error 1335. The file 'Data1.cab' required for this installation is damaged and cannot be used. This may indicate a netowkr error, an error reading from the CD-ROM, or a problem with this package. »

  When I try clicking on ignore, I get this message:

  "Error 2350. FDI Server error. "

  I wish that I was good enough to know what that means, but I'm completely lost here. I tried to install this on two machines (XP Home SP2) and Vista, both give me the same problem.

  I feel there may be a problem with the software on the site. Could someone else confirm this or get an idea of what to do?

  Thank you

  -Antonio-

  you are absolutely right

  It's something like a lottery. Guess a lucky time for downloading a file

• Cannot open files - jpg corrupted or damaged & raw files.

  original title; Corrupted or damaged jpg and raw files.

  About 5% to 10% of my recent photos does not open.  It indicates that the files are corrupt or damaged.  Is there anything else I should try to leave the files open?

  About 5% to 10% of my recent photos does not open.  It indicates that the files are corrupt or damaged.  Is there anything else I should try to leave the files open?

  Tried opening them with third-party applications like PAINT.NET?

  What your backups?

• damaged PDF file

  Hi all

  A few hours ago, I just modify a PDF in preview when all of a sudden my computer froze and I had to force quit the application. When I try to go back to my pdf file, it can not be opened. The message appeared, it was "the file could not be opened. It can be damaged or use a file format that can be displayed does not recognize'. I tried to open it through acrobat and reader, and I get the same message. Is there a way I can still get the file? Thank you very much.

  Hi Yanad,

  Then, it seems that the pdf file was damaged and that it is not recoverable. Sorry to hear that.

• How to recover damaged PDF file?

  Is a file created in one of its programs. The file has been damaged and in the program Aboriginal people does not open. The *.indd. file extension

  In the logon attempt writes: "... file is damaged (error code: 4).

  So no problem it is copied everywhere.

  The file lay quietly on the disk a few months after completing the work with him and PDF of manufacturing. And here all of a sudden, it was required to change a source code. And it does not open.

  If it is possible to restore somehow, even with the loss of a part of the data?

  If it was good, he could not break. Of course, there is a probability of virus and almost no likelihood of an error undetected playback of a disc. Try to delete/transfer the folder: \Documents and Settings\...\Application Data\Adobe\InDesign your Adobe Version

  Then try to open the file.

  You can always check this forum. Maybe you will find some useful recommendations.

  http://www.filerepairforum.com/Forum/Adobe/Adobe-AA/PDF/1913-how-to-open-corrupted-when-do wnloading-a-pdf-file

• How to open a corrupted or damaged Indesign file?

  I have an Indesign file five year (book) I worked for months in the latest version of creative cloud. This morning Indesign suddenly broke and now when I try to open my Indesign file says it is "damaged" and when I try to repair the only indesign file crashes every time.

  I can open other Indesign files, just not this one.

  I'm on a PC running Windows 7 and the file in question is large, 225 MB, with great graphics, etc. I think it might have been created on CS2 and then worked on CS4 before migrating to CC.

  The file is fixed! I sent it to Adobe and they have managed to open on a Windows 7 machine with no problems. The file has been re-recorded (IDML and INDD) and sent to me. I open the IDML file on my machine without crashing. I then re-recorded it own INDD format file and stopped accidents.

  My original file has hundreds of linked graphics and the technician suggested that the problem could be hiding there. I understand that backup to IDML deletes the file down to its bones, which could have repaired the corrupted link.

  Thanks Willi and Peter! You have both offered useful suggustions. Backup to IDML via the script looks like it might have worked if I had done up to now.

• damaged Setup file

  I am updating Adobe Muse but I get a message that the application could not be installed because the Installer file is damaged, please help.

  Hello

  I assume that you are working on a Mac.

  Could you please remove Muse in the applications folder.

  Then, make sure that remove you it from the trash as well.

  Now, use the link below to download and install the version of lates Adobe Muse:

  http://www.Adobe.com/go/muse_latest_mac

  I hope this helps.

  Kind regards

  Sachin