DAQ 6014 connection with sensor

Similar Questions

• Drive not work in IE and saying failed to connect with fingerprint sensor

  Hi all

  I purchased a Qosmio x 500 10 t a couple of months back. For the first two weeks, I had no probs using the fingerprint reader to log on windows and connect to Web sites in Internet exploer.

  All of a sudden it would not work on any website that is stored. The Green banner was shown in the upper part of the site and asked finger drag, but nothing happened when I slipped. I rebooted and it worked again but not for long before failing. This time a restart didn't work so I deleted my fingerprints and Web sites and started from scratch. It worked for a few attempts before probs started. And to try to enter the utility of fingerprint it says the connection of sensor failure. So, I did a system restore. He worked for some time yet and then same probs. So I found the update utility software, uninstalled the old and put on the new. Even once worked for a couple of times then failed.

  I couldn't find anything about it is stuck in the registry but to be on the safe side I did a full system own return to the original using disks of backup configuration. Hey presto, I thought that he had worked. Everything goes ok for the first 24 hours and then same problems start to occur. Only this time it's also prompting me to register fingerprints even if I already have. And when I try to enter the utilioty it says cannot read the sensor again.

  The fingerprints for windows log still works as long as I do not close the utility of fingerprinting before stopping. If I quit the utility I can't reopen it as it says failed to connect to the sensor only. And then I have to uninstall and reinstall the utility software. Aty at the time where he occasionally works on sites stored Web, but most of the time it does nothing.

  Help, please. I have to return Toshiba laptop?

  Have you seen this FAQ?
  + Log on to websites with Authentec Fingerprint Software (TrueSuite) and Internet Explorer 8 +.
  http://forums.computers.Toshiba-Europe.com/forums/Ann.jspa?annID=62

  I recommend looking in the forum and read the HowTo and FAQ section in this forum
  Could still be interesting

• Re: Portege Z30: Fingerprint software does not, the connection with the sensor fails

  Hello to you all,.

  I have a great fun for you guys. If you're curious, it's here...

  I just bougt garage a portege Toshiba Portege Z30t-A-126 PT24CE-01400HFR
  Nice machine but SSD is too small, so I changed the original SSD 256 to a 512.

  Reinstalled Win7 completely without any pb.

  Just a pb in fact: the footprint software does not work.
  When I hliant, it fails and says "unable to connect with the sensor.

  In french "fingerprint recognition."
  Unable connect the sensor.

  But when I check the Device Manager computor it says that everything is in place and ongoing execution, validity (WBF) (PID = 0010) sensors works very well and the latest version of the driver is installed.
  (I downloaded the form driver toshiba Web site.) The name of the driver is fp - sw - 20140115084521.zip)

  Then? What's not?

  I spent hours searching the web and tried everything I could. Reinstalled a thousand times the drivers, software, tried other drivers... But there is no way that I can fix it.
  It's really annoying...

  Can someone help me please? Have you an idea? I'm stuck...

  Thanks in advance. :-)

  Hello

  This issue of the fingerprint has been described in another thread.
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=81261

  You should be able to solve the problem installing the chipset driver.
  Another user said, an installation of Proset Ethernet drivers/software was necessary to get the problem resolved. But to be honest that I put t think that missing Proset utility would cause the question

  However, check it out.

  Your comments would be appreciated

• Connection of sensors with different output and floating grounds varies to NI 9205

  I need to connect three sensors for the same NOR 9205 tends in NOR cDAQ 9172. The first is a Lucas Schaevitz Inc. LVDT + -15 VDC excitation and the output signal of 0 to +-10VD. C the municipality of excitement and the common of the signal must be connected. The second is the Ellison int sensor pressure transducer. GS 4002 with 13-30 VDC excitation and 0 to 10 VDC output signal. The third is the excitement of VDC data Instruments Inc. model AB pressure sensor 5 and 0-100 mVDC signal output.

  All the resonances tensions share common ground that I've connected all the reasons for excitement. But apart from the common LVDT signal is the same as the current excitation, the other two have floating grounds.

  I have two questions. Can I have a few channels in CSR mode and some in differential mode in the same module OR 9205? Personally, I think that it might not work but I put the question just to be safe, and that leads to my second question.

  If I want to connect three sensors above in differential mode how I would do it?

  
  

• Keyboard Slim lose the connection with the Dell coming 11 Pro

  Someone meets keyboard slim interruption of connection with the Dell pro 11 site?

  He might have to unplug the keyboard, and the re - attach the keyboard to the Tablet again to use the keyboard.

  I have two Dell 11 pro + keyboard slim venue. Both devices have this kind of problem.
  It's absolutely wrong.

  How to solve this problem?

  Besides working with Dell Pro they explained to me that the keyboard must be used on a flat surface (not towers for example) and the keyboard & tablet should be at an angle of about 117 degrees between them.  Now, of course, you can't measure it, so just assume if you use on a table or desk and its supported properly you have to the correct angle.

  I find that if the keyboard does not after sleep or start arriving, simply lift the keyboard out of the surface of the table a few inches and let it fall down.  It will immediately start working.   I think that there is a sensor in the keyboard, which is not always realize or to calibrate properly in coming to life.

  If you have complications beyond the keyboard chip out of sleep, I'd take it upward with the support to push the issue.

• I just bought the last Apple TV - I can't seem to connect with the App Store and Siri is completely useless. This is an example of how Apple is unable to produce a useful product?

  I just bought the last Apple TV - I can't seem to connect with the App Store and Siri is completely useless. This is an example of how Apple is unable to produce a useful product?

  Hello

  Be sure to follow the instructions in this article to support > set up your Apple TV (4th generation) - Apple supported

• Current device is registered with the former owners of Apple ID, not allow me to connect with my Apple ID?

  Current device is registered with the former owners of Apple ID, not allow me to connect with my Apple ID?

  The former owner must unlock with their password, or give you the password. Otherwise, the phone doesn't help you and no one can help you. Get your money back if you can.

  What to do before you sell or give away your iPhone, iPad or iPod touch - Apple Support

• Loss of connection with iCloud

  Whenever I login I have to re - connect with my iCloud - suggestions, no matter who?

  I assume you mean iCloud.com website?  How are you internet connection otherwise?

• Mac book air cannot detect my iPhone 6, after the cable on my I phone 6 to connect with my mac book air, nothing appear on the mac book. Seems like it can't detect the file i phone 6. I want to export my photos and do the upgrade version.

  Hi, after plug the cable on my phone i 6 to connect with my mac book air, nothing appear on the mac book.

  Seems like it can't detect the file i phone 6. I want to export my photos and do the upgrade version.

  Current situation is nothing exportable phone and also cannot do anything mac book because they cannot detect each other. Please advise, thank you.

  You can try to move to a different USB port. And if your just trying to swap photos try Airdrop. Also try to go here If iTunes does not your iPad, iPhone or iPod - Apple SupportHope this help, good luck to you.

• In a roaming network, Mac always connects with AE which is further away

  So, I had a roaming network for years to host a detached office which was too far from my house.  Worked very well.  Now, my family and I have moved into a temporary rented condo (two floors).  Therefore, there is a lot of wifi networks in the area in conflict with.

  After trying to extend the network (signal too low in the area), I decided to try the roaming network again.  Most of the time, it works very well.  But from time to time, my iMac (on the ground floor) connects with the Airport Extreme, which is on the floor instead of the Airport Express, which is down in the same room as the iMac.  What happens when it connects to the Airport Extreme on the floor, my Tx rate drops to less than 100 Mbps (sometimes dramatically if) and I am unable to listen to the music to my Airport Express without dropouts.

  The dressing was to turn off my wifi on the iMac, and then turn it back on.  It will then connect to the Airport Express.   The problem is that I have to do this in general once a day as my iMac will enter into the "standby" and periodically reconnect with Airport Extreme when I wake up (or if I re-enable it if off).  Ideally, he would stay with the Airport Express.

  So I hope that there is an alternative.  I thought about simply renaming the Airport Express network in the different name of Airport Extreme.  But all the itinerant instructions whereby I know that network names must be the same for all airports in the roaming network.  But perhaps this is not the case.

  Comments are appreciated!

  Unfortunately, you encounter a known issue with the use of a roaming network... and it is not specific to those provided by Apple either. The "solution" you use, although not elegant, is basically everything with that we have (at this time) to go.

  In theory, your iMac fixed, must always connect to the Wi - Fi with the signal network hard... not necessarily the closest to it. It may be possible, since you mentioned that you live in a highly congested environment Wi - Fi, your iMac is struggling to determine the right network to connect to when starting.

  Of course, a more "permanent" solution for your iMac, at least, would connect directly to the nearest base by Ethernet station.

• Thunderbird does not connect with the server

  Another recent problem is Thunderbird does not connect with the server. I don't know if sent mail will go out, but I know I'm nothing receive. My internet connection works well for FF or another browser. I checked my settings and they seem OK. I checked the default settings in Win10x64 and they are correct. Any ideas?

  Although windows 10 is new for us all. How do solve you. I have other solution with very similar issues.

• Does not connect with the e-mail server after update.

  Thunderbird ran an auto update yesterday. Then it just stopped working. It does not connect with the Comcast email server. An error message appears "Unable to connect" and "the connection was refused when attempting to contact live.mozilla.messaging.com. I don't want to uninstall and reinstall for fear of losing my emails and address book. How can we get Thunderbird set, there is no tool in the toolbar to enable the debugging and correction of program errors.

  I use Thunderbird version 38.1.0.

  Thank you.

  The problem solved itself, Thunderbird has just started working. I followed the thread suggested by Christ1 and found none of it applied. No malware, no browser, no certificate error security block. I did, however, in Thunderbird, under Tools/Options/General uncheck the button for "When Thunderbird launches, show the Start Page in the message box." I do know that if this helped, Thunderbird still do not access Comcast mail for hours after that, even with several stops and restarts.

  Until the next problem...

• 1st generation Apple TV cannot connect with the apple ID

  Have 1st Generation apple TV and recently cannot connect with my apple ID.

  The reset several times and nothing.

  Help?

  You have activated 2 no authorization of your Apple ID? If so, disable the connection from a browser and temporarily, then connecting ATV, then reactivate. If not, please describe what is happening when you try to connect. What message do you have?

• should my time capsule be connected with a cable for backups, after the initial installation?

  should my time capsule be connected with a cable for backups, after the initial installation?

  If you mean that you have to keep your Mac connected to a Time Capsule via Ethernet for future backups, then the answer is no. Time Machine and time Capsule are designed to work over wireless for your Mac would just need to be connected to the wireless network provided by the time Capsule.

• I had to have an iphone 4, but is unable to operate in Italy. It is supposed to be unlocked by Apple and O2, but when I try to connect with wind or Tim there is no service. What should I do?

  I had to have an iphone 4, but is unable to operate in Italy. It is supposed to be unlocked by Apple and O2, but when I try to connect with wind or Tim there is no service. What should I do?

  Maybe it is locked, Apple do not unlock phones, then call O2.