Data acquisition and video acquisition

Similar Questions

• How to recover data images and videos

  How to recover data images and videos of empty Recycle Bin.

  Hello

  Have you looked in the trash?

  Recover files from the Recycle Bin - Vista
  http://Windows.Microsoft.com/en-us/Windows-Vista/recover-files-from-the-Recycle-Bin

  Recover files from the Recycle Bin - Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/recover-files-from-the-Recycle-Bin

  How to restore previous Versions of a file and the folder of Vista (Ultimate, Business and Enterprise)
  http://www.Vistax64.com/tutorials/122127-previous-versions-shadow-copy.html

  How to restore files and folders in Windows 7 with previous Versions
  http://www.SevenForums.com/tutorials/85679-previous-versions-restore-files-folders.html

  ----------------------------------------------------------------------------------------------------------------------------

  This could help you recover a file, or a previous version (all versions of Vista and Windows 7).
  http://www.ShadowExplorer.com/

  ShadowExplorer - recover lost files and folders (Vista and Windows 7)
  http://www.SevenForums.com/tutorials/132087-ShadowExplorer-recover-lost-files-folders.html

  ----------------------------------------------------------------------------------------------------------------------------

  Recuva - free - recovers files deleted from your Windows computer, Recycle Bin,
  map of the camera digital or MP3 player. And it's free!
  http://www.Piriform.com/Recuva

  Recuva - Forums - help here
  http://Forum.Piriform.com/

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Synchronize data waveform and video [AVI]

  Dear users,

  I'm trying to match the time of a video using a high-speed camera and data waveform graphs to show what each frame in recording waveform graph. Video and data from the sensors triggered from the same source. Samples of the camera at 10 kHz while data acquisition to 80 kHz.

  I pressed on--video - display - frequency = 10000 [1/s] and start time 0 [s]. In addition, I chose the cursor of the curve to force the graph to start. Video with data are not synchronized as the video ends quickly so that the chart does not reach the Summit. Any ideas would be appreciated.

  Thank you.

  Hi StathPol,

  Check the 'Unit' property in the chain of the hour or the waveform delta x property, depending on whether you are using.  Perhaps your sensor values have a "ms" or something for the unit of time information string.

  Brad Turpin

  Tiara Product Support Engineer

  National Instruments

• motion control for vertical actuator and data acquisition

  Hello

  I am a researcher (a branch of civil engineering) geotechnical engineering and I have very little knowledge about the acquisition of control and data motion, so would need a lot of help from the experts OR. I have only knowledge base on these 2 aspects based on my reading of some materials on the Web site of NOR and youtube videos, so I hope that you bare with me . Here are my questions:

  I am trying to build an actuator which will be used to push a probe (a penetrometer with a load cell to measure the resistance of a soil sample), resembling the concept, photography in the attached file. I need to have these criteria for my system:

  (1) actuator, which can push the probe at speeds between 0.01 mm/s - 300 mm/s with precision and move the probe cyclically (upwards and downwards) in the vertical direction
  (2) load expected on the probe into the ground range: 0.02kN - 6 kN.
  (3) necessary to get the load cell load data and the speed of the probe.

  4) able to control the actuator to a PC (speed and posotion) and monitor data from transducers and data log time even the transducers.

  Guess my beginners is that I will need:

  For orders:
  (1) software - LabVIEW and NOR-motion assistant

  (2) controller - NI PCI-7342

  (3) driver/amplifier - analogue servo AKD Drive

  (4) motor - motor brushless servo AKM

  For the acquisition:
  (1) software - based LabVIEW development systems

  (2) amplifiers or other device - no idea what type on the conditioning of signals

  (3) data acquisition device - no idea what type

  Since I'm a beginner, is - that someone might recommend components (hardware and software) for the control and data acquisition. I'm on a tight budget, so I thankful if someone could help me to recommend components good enough to build my system.

  Thanks for your help.

  At these rates, you will need to run the sensor for the cDAQ.  You can configure the analog output on the Tritex nationally on the position.  There is an adjustable filter that you can set in order to get a clean enough to 300 Hz signal.  When you learn about the Tritex, make sure that let you them know what comms and e/s that you want to use.  If I remember, not all options have worked together.  The analog output may need to be my, but you can put a resistance through the acquisition of input data to get the voltage instead.  I don't remember all the details.  You should really not too much on the Tritex/LabVIEW side.  You will send your movement parameters (beginning of end of race, speed, position, accel, cut), and if you cycle (I believe you) or simply running in a loop.  You could also just be able to use the functions of jog.  When you get close to knowing exaclty what you need, PM me and I'm sure we can work something out with the drivers.  You need only the basics.  In fact, you could probably do this all your movements via digital and analog i/o.

• Acquisition of analog and video synchronized

  Hello experts tiara,.

  I am curious about this example Diadem DAC:

  http://zone.NI.com/reference/en-XX/help/370858M-01/explonl/explonl/explonl_dac_video/

  He claims to be able to acquire analog and video synchronized.  Anyone can determine how to properly synchronize these two data flows are?  Because it is a desk, probably Windows machine and no trigger material between video and analog devices, I'm guessing that the two are, at best, on +-1 second.

  Can anyone solve this problem?  I see in the manual use tiara (here) that NEITHER has done some work in order to study how the clocks are accurate in Diadem.  And they even mention a few points of 100 msec.  But I don't really trust this number when it comes to acquiring analog and video data simultaneously.

  Thank you, John

  Hi John,.

  You ask an interesting question, and I had contact with the developer of R & D responsible for this service and received an explanation on his part on the works of this feature.

  The target application for this specific feature is not for use cases where the exact synchronization between the measurement and data acquisition are required (i.e. a crash test of vehicles with more than 1000 frames / second video recording). This feature is implemented for users who wish to have the possibility to use webcams to get insight into what their machine or test do any recoding data at the same time. We should ask this 'parallel acquisition data and video' and not 'synchronous acquisition' - which suggests that it is a way to ensure that the data and the video are actually synchronized during the acquisition process. The original entered German aid system speaks 'parallel' instead of 'synchronous' acquisition, the English translation incorrectly uses the word 'synchronous' instead of 'parallel '. I contacted our documentation team to clarify this part of the help system.

  Accurate synchronization to achieve, especially between multiple streams of data acquisition and a camera, the application must use frame grabber hardware - hardware specifically designed to support the capture video or image.

  This is how DIAdem DAC addresses this type of application, I hope this information is helpful to you and others to this feature:

  Tiara DAC is a top priority on the acquisition and the release of the data to and from data acquisition equipment. The video recording feature is less of a priority and is not controlled by tiara constantly. The video recording process is triggered as closely as possible to the data acquisition process. The current local time stamps of two triggers (data and video) is registered allows us to determine the exact time for the two signals of reading according to DIAdem, i.e. If there is a delay in the start of video recording, is considered for reading in MODE of DIAdem.

  Our tests with made with a camera (not multiple, which is supported by MODE of DIAdem) and data acquisition equipment NOR (not several devices, which is also supported by DIAdem). In these tests, that we have seen the video and data were generally synchronous within some frameworks (no real 100% synchronicity) - which was quite thin which this solution based on USB low-cost camera technology was designed for. It is generally better than +/-1 second depending on the application, but also synchronized to the millisecond like material systems would be able to achieve.

  There are several factors that influence the results of the tests carried out in this area of application: PC hardware (CPU, RAM, disk system), the tasks of measures, other software running on the computer chassis, the camera and the framework, software drivers, etc.. There are too many variables beyond the control of tiara that can influence the synchronicity of the acquisition of data and images based on the software only, so true synchronicity can be achieved using equipment designed for this purpose.

  I hope that clarifies the DIAdem DAC functionality a little better. Thank your for having pointed out the misuse of the book 'synchronous' in the help system, going as fixed for the next release of DIAdem. Please let us know if you have any other questions.

  Best regards

  Otmar

• Laptop HP 15-ac118tu: pilot unavilable for PCI Data Acquisition and Signal Processing controller

  Hello

  I use Windows 7 Ultimate Hp Notebook model ac118tu. In Device Manager, it shows the yellow mark to the Acquisition of ICP data and Signal Processing controller (the name that appears twice).  What is the use of this controller?

  Yellow mark means that I need to install the driver for this. Please share the link to the installation of this driver.

  Secondly, I want the drivers for the webcam as well. Please share.

  Hello:

  You need the driver for this device...

  This package contains the driver which allows Intel platform dynamic and thermal firmware setting. Intel platform dynamic and thermal environment information system temperature and power use for the heat of the system
  protection to work properly. This package is provided for the laptop models running a supported operating system.

  File name: sp71638.exe

  For the webcam you just install this software.

  This package contains the CyberLink YouCam software for laptops models and operating systems. CyberLink YouCam is an application webcam that allows users to capture images and video from a web camera and apply visual effects for video and captured images.

  File name: sp71830.exe

• HP laptop - 15-r224tx: PCI controller of Data Acquisition and processing for HP for laptop - 15-r224tx

  I get upgraded my laptop (HP for laptop - 15-r224tx) for Windows 10 but I can't find the driver for the controller of PCI Data Acquisition and Signal Processing. Please help me find the right one.

  Thank you!

  You are the very welcome.

  It is the latest version of the W10 driver for this card model... see if this solves the problem, if you have not already installed this driver.

  This package contains the installation package driver for the controller wireless LAN Realtek RTL8723BE/RTL8188EE in the laptop models running a supported operating system.

  File name: sp72517.exe

• PCI Data Acquisition and Signal Processing controller driver

  I installed win 8.1x64 on my HP Probook 450 G2, but miss me the driver of PCI Data Acquisition and Signal Processing controller.

  Can you please help?

  Thank you

  Leontina

  Hello:

  Please see if installing the Intel Chipset driver installs this device.

  https://Downloadcenter.Intel.com/Detail_Desc.aspx?DwnldID=20775 & lang = eng & ProdId = 816

• Z600 Workstation: workstation Z600 missing of pci data acquisition and signal processing controller driver

  I just installed Win7 Pro x 86 on my Z600 workstation.  It was an upgrade to Windows XP Pro.  I'm missing the driver for PCI Data Acquisition and processing of the Signal and Hardlock USB 1.02 controller in Device Manager.  Can someone help me find these drivers.  I looked on the page of Support/Drivers for this model, but could not find anything.

  Hello

  You can get assistance on the HP Enterprise Business Forum since you have a professional worktsation.

• HP 240 G4-328TX: need driver for PCI and Signal Processing controller HP 240 G4-328TX Data Acquisition

  Hello

  Need driver for PCI and Signal Processing controller HP 240 G4-328TX Data Acquisition

  Can anyone provide me please the link for download it for windows 10

  Thank you

  Hello:

  See if this driver works...

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=7609938 & swItemId = ob_153701_1 & swEnvOid = 4192

• Pavilion TS 17-g099nr: PCI Data Acquisition and processing of the Signal Windows 10 x 64 controller driver

  Hi, it is impossible for the moment to install the driver for PCI Data Acquisition and Signal Processing.

  I downloaded the driver from Intel, and it did not work... I found a version of this site for windows 8.1 unupdated and it does not work.

  A little help?

  Thank you!

  Hello:

  It could be one of two different drivers.

  Try this one first, and then restart the PC.

  This package contains the Intel Chipset Installation utility. This utility allows the operating system to show the correct name for the Intel hardware that is installed in the Microsoft Windows Device Manager. This package is provided for the laptop models running a supported operating system.

  FTP://ftp.HP.com/pub/SoftPaq/sp75501-76000/sp75561.exe

  If this does not work, try this one...

  This package contains the driver which allows Intel platform dynamic and thermal firmware setting. Intel platform dynamic and thermal environment information system temperature and power use for the thermal protection of the system to work properly. This package is provided for the laptop models running a supported operating system.

  FTP://ftp.HP.com/pub/SoftPaq/sp75501-76000/sp75506.exe

• 15 - ac122tu: PCI of Data Acquisition and the controller driver of laptop HP 15-ac122TU signal processing

  Hi team,

  I just install windows 7 edition integral and peripheral Bluetooth windows 8.1 is not be detectable, when I search for problem that I came across this PCI data acquisition and Signal Processing controller driver is missing and a unknown device driver missing shownup in my result of troubleshooting. Please help me

  Please find the screenshot for your reference

  Thank you

  

  Hello:

  See if these drivers work...

  CQI PCI controller:

  This package contains the driver which allows Intel platform dynamic and thermal firmware setting. Intel platform dynamic and thermal environment information system temperature and power use for the heat of the system
  protection to work properly. This package is provided for the laptop models running a supported operating system.

  File name: sp71638.exe

  Bluetooth:

  This package contains the installation package driver for Realtek bluetooth in the laptop models running a supported operating system.

  File name: sp71288.exe

  Unknown dev:

  This package provides the HP 3D DriveGuard software (HP ProtectSmart Hard Drive Protection) for the laptop models running a supported operating system. HP 3D DriveGuard software protects the drive hard by parking the heads if cell phone accidentally falls, or is suddenly struck by another object.

  File name: sp71811.exe

• 15 - r235ne: SM bus controller / IBD DATA Acquisition and Signal Processing controller

  Hello team

  I am facing problem in finding the right driver for material below.

  1 SM bus controller

  2 IBD DATA acquisition and Signal Processing controller

  kindly help

  concerning

  NASIR

  Hi, Nguyen:

  Download and install the Intel chipset installation utility and restart the PC.

  The 2nd driver down on the left is the automatic installation file.

  https://Downloadcenter.Intel.com/download/20775/Intel-chipset-device-software-INF-Update-utility-?product=1145

• How can I use other companion DAQmax and data acquisition in labview code?

  Hello

  I'm new in labview and want to combine four different codes of labview and run them at the same time.

  I use my data acquisition PCI-6071E and BNC-2120. I want to send an analog output (flat DC signal) to control a blower, an analog volmetre to a (DC) output pressure transducer, also receive data from a pressure sensor and hot wire probe.

  I wrote four different VI for each of them (using DAQmax to output analog and DAQ assistant for analog inputs) and each of them works well, but when I want to use them together they do not work.

  Anyone know how to make them work together?

  Thank you

  Pooya

  To the DAQ Assistant, simply follow the instructions for the selection of multiple channels when you create (where he says quite clearly,' ' or to select multiple channels "). If already created, open the DAQ Assistant and click on "Add channels" at the top of the page.

  When you use a physical channel name, you simply click on browse instead of a single channel. Use the same or for multiple channels.

• measure the angular speed, angle and trigger using a gyroscopic sensor breakout board and LabView data acquisition

  How to measure the angular velocity, the angle and trigger using a gyroscopic sensor breakout board and LabView data acquisition?

  There is a single channel data acquisition code which measures the angular velocity, angle and flexibility using a gyroscopic sensor breakout board and acquisition of LabView data attached to this, I need a help to creat two-channel data acquisition code?

  Hello

  Attached is a vi that you can use in order to read the measured angular position of an encoder.

  If you need more examples on the tasks that you can develop with NOR-DAQmx and LabVIEW, you just need to open LabVIEW and click Help > find examples > Input and Output material > DAQmx > entry counter.

  Kind regards

• HP laptop - 15-ac022ne: pci of data acquisition and signal processing controller

  I have this laptop HP - 15-ac022ne and I got windows 8, evrything has not been totally perfect until I upgraded to windows 10, wireless function no longer works, tried to install the driver and update, it was succsessfully installed in the machine to say, but still not working and PCI data acquisition and signal processing controller driver is missing tried to download the chip set on the driver support page, does not, tried to update the driver through the Device Manager and the message can not find a driver for the device of said...

  Please I need help...

  Hello:

  You need this driver for pci data acquisition and signal processing controller.

  FTP://ftp.HP.com/pub/SoftPaq/sp72001-72500/sp72069.exe