Data acquisition reading incorrect when you use a loop

Similar Questions

• Is there a way to simplify the addition of data in the worksheet when you use a .csv instead of a .xlsx?

  I changed one of the newbies ActiveX toolkits provided by Joe_H to enter a number in a spreadsheet by using the following code 'save to existing Spreadsheet.vi.  However, since it was designed for a .xlsx, it uses an entry for the index of the sheet (that I set to 1 when you use my .csv file).  Currently, the program works, but I was wondering if there is a way to remove the index sheet part.  I tried to just delete, but I could not find how connections for refnums etc. should then work out.  Thanks for any advice, even if it's just to say that nothing major should be done.

  I don't think that there is a much easier way to do what you want then the code you provided.

• Keep all information collection during the acquisition of images when you use the basic IMAQ package

  I did show a command of X from IMAQ image control that has the ability to overlay dots and lines on an image, but when I put my control of X in my loop of acquiring image collections information disappears with each new picture that I acquire.

  How can I keep the overlay in place and just update the control with the new image and does not overwrite data overlay? I tried the function of superimposition of fusion, but this doesn't seem to work.

  Thank you.

  Overlays are completely erased when you acquire a new image.  You can create collections on a separate image, and then copy to each new image overlays until you view it.  The other option is to re-create overlays for each new image.

  Bruce

• Error message, product key incorrect when you use the key from the bottom of my computer

  I've had my laptop for a long time, but it have not used for a lot more than internet stuff.  However, I occasionally used for Word documents and now apparently used a trial period free but I didn't know existed.  So, I'm trying to put in my product key to get full use of return, but the computer always tells me that it is a mistake.  And it's not!  The number is on a sticker on the bottom of my computer, and I entered it correctly several times.  That I do know?  Thank you.

  Please note that if you use the Windows 7 product key located on the certificate of authenticity attached to your system label, this will not work, it is only for Windows 7. You need a product key Office 2010.

  If your computer comes with a trial version of Office, you need to get a trial key or buy a full license:

  Trial license:

  http://Office.Microsoft.com/en-us/try/

  Full license:

  http://support.Microsoft.com/kb/823570

  Get the key;

  http://Office.Microsoft.com/en-us/buy/redir/XT101874326.aspx?CTT=5&origin=HA101847520

  If you purchased Office 2010 and get no valid product key error to refer the article mentioned below:

  http://support.Microsoft.com/kb/2002262

  Frequently asked questions about Office Activation Wizard and about features in Office 2010 and Office 2007 programs view programs

  http://support.Microsoft.com/kb/927921

  Error message when you start an Office application after installing a suite Office: "invalid product key".

  http://support.Microsoft.com/kb/836178

  If you have a trial version of Office 2010 that came with your computer, try to uninstall it first:

  Run the patch tool mentioned in the article below to uninstall Office 2010:

  http://support.Microsoft.com/kb/290301

  Download a trial version of Office 2010 that corresponds with the edition that you purchased and convert it to a version full:

  Trial license:

  http://Office.Microsoft.com/en-us/try/

  See the link on how to convert a trial version of a suite full Office 2010 or program to a commercial version: -.

  http://Office.Microsoft.com/en-us/project-help/convert-a-trial-version-of-an-Office-2010-suite-or-program-to-a-full-retail-version-HA101886436.aspx

  http://Office.Microsoft.com/en-us/buy/convert-your-trial-to-a-full-product-version-HA101812668.aspx?CTT=1

• ORA-01821: date format not recognized when you use the format TSH:TZM model

  Hi all

  Running on the Oracle 11 g Enterprise Edition Release 11.2.0.2.0 - 64 bit Production database

  I guess I am missing something here... but the following SQL code raises the exception ORA-01821.

  SELECT to_char(CAST(to_timestamp(SYSDATE) AS TIMESTAMP WITH LOCAL TIME ZONE),'YYYY-MM-DD"T"HH24:MI:SSTZH:TZM') as date_updated FROM DUAL;
  

  ORA-01821: date format not recognized

  01821 00000 - "date format not recognized".

  * Cause:

  * Action:

  If I change the model of TZDS or TZR time zone format... This works.

  SELECT to_char(CAST(to_timestamp(SYSDATE) AS TIMESTAMP WITH LOCAL TIME ZONE),'YYYY-MM-DD"T"HH24:MI:SSTZD') as date_updated FROM DUAL;
  

  2013-09 - 04T 13: 24:16EDT

  I need to format a date in a date in the correct format with time zone for an Atom (RFC3339) feed

  for example. 2013-09 - 04T 14: 11:09 - 05:00

  I do not know why the TZH:TZM triggers the error...

  Database NLS settings have anything to do with it?

  NLS_TIME_FORMAT = HH.MI. SSXFF AM

  NLS_TIMESTAMP_FORMAT = DD-MON-RR HH.MI. SSXFF AM

  NLS_TIME_TZ_FORMAT = HH.MI. SSXFF AM TZR

  NLS_TIMESTAMP_TZ_FORMAT = DD-MON-RR HH.MI. SSXFF AM TZR

  Thanks for the help

  If you want to change the display format, can you use to_char with the expected format

  SELECT to_char (TO_TIMESTAMP_TZ (to_char (sysdate,' YYYY-MM-DD HH), "YYYY-MM-DD HH:MI:SSTZH:TZM"), "YYYY-MM-DD"T"HH:MI:SSTZH:TZM") t1d FROM DUAL;

• Control reference 1055 error when you use a loop for

  Hello

  I'm having a problem using control references to accomplish the following: I a VI that reads data from a text file, and then uses that automatically update the value of a control on front panel on two live different, then set the default values, and then save them. Comes from the array of control references, I tried looping on text labels until I have find the one corresponding to the order, I want to change and then update its value. The problem I have is that if I use a loop for, then 9times of LabVIEW 10 complains error 1055: "LabVIEW: object reference is not valid. If instead I the wiring to the index table and manually extract the reference, then it works every time and for each index of the reference of the order.

  Can someone take a look at my code and just see if its obvious what the problem is? In this case, I have a simple solution, but I would really like to understand what I did wrong. I have included as a code snippet, but also attached the files if that helps (Its Import_Colormap.vi, which is the problem). Persons with disabilities code fails, the active code works but I can't see what is really the difference between them - I can change the index of array 0,1,2, 3. and no mistake.

  Thank you.

  

  Your "Colormap.ctl" is a strict type def that contains a ring.  You define the elements programmatically, make the default values, and then save the "Colormap.ctl"?   I was never practicing this but here is a thread that covers this in detail. I do not understand what you expect reach by running.
  The next thing: at the same time (at the same time!), you open the Colormap.vi (this is what we see in yout PNG) that contains an instance of the Colormap.ctl on the front panel. I'm not pretty sure if LabVIEW can handle this correctly. This could be the reason why you sometimes get the error 1105.
  I prefer StringsAndValues and eventually the value of the ring running.  There is no need to do it with a def of strict type.

• Used QUICK to collect files from the XP machine. Now cannot locate the data when you use Easy Transfer on Win 7 machine to restore settings

  I had XP SP3 on my computer and used the files and Settings Transfer Wizard to collect the data.  Recorded on another partition, formatted and installed Win 7 Pro.  Now, when you use Easy Transfer to restore data it tells me that it cannot find all the data.

  Any ideas?  Thank you!

  For any question on Windows 7:

  http://social.answers.Microsoft.com/forums/en-us/category/Windows7

  Link above is Windows 7 Forum for questions on Windows 7.

  Windows 7 questions should be directed to the it.

  You are in the Vista Forums.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  XP forums:

  http://social.answers.Microsoft.com/forums/en-us/category/WindowsXP

  Link above is for XP Forums.

  There is a list of the different Forums XP to the link above to help you.

  You get the help you need there.

  See you soon

  Mick Murphy - Microsoft partner

• How can I configure Messenger to record my conversations, record them and send them to a location I can read and save when you use Messenger on other computers than mine?

  How can I configure Messenger to record my conversations, record them and send them to a location I can read and save when you use Messenger on other computers than mine?

  original title: Live Messenger

  Hi Nicoliani,

  To start saving your Conversations in Windows Live Messenger

  1. connect to your window Live Messenger and click on 'Tools' or click on your display name.

  2. scroll down to "Options", a window should appear. When he does very well and click on "Messages".

  3. locate "historical Message". After that, check the box that says, "automatically keep a history of my conversations.

  4. below that you will see "save my conversations in this folder."

  5. to side of her you will see change, make sure that it is a file that you can access and watch later.

  6. If you are on a network, you can save it in a directory which you have access, or you can save it to a location and later mailed to yourself and access it later.

  Where chats are saved is given below.

  1. to access the Conversations go to the start bar and click My Documents. Then click on "my received files."

  2. There should be a folder with your name on it. Click the folder, then you will be in another folder called history. Continue

  3. by clicking on the folder, now you should see all your saved conversations.

  Hope this information is useful.

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Adobe acrobat reader for windows 8.1 x 64 crash when you use the search function

  Software Adobe acrobat reader crashes on windows 8.1 x 64 when you use the search function. Please help it is extremely annoying

  Hi rikusg98319732,

  I will suggest you to perform a clean reinstall of the reader.

  Delete using the cleaning tool: Download Adobe Reader and Acrobat tool - Adobe Labs

  Install from here: http://get.adobe.com/reader/enterprise/

  Thank you

  Abhishek

• When you use the plan of photography can I be connected to the internet all the time? Data are always deducted when using Photoshop or Lightroom?

  When you use the plan of photography can I be connected to the internet all the time? Data are always deducted when using Photoshop or Lightroom?

  You should not have a permanent internet connection.  You should only be connected when the software must check whether the subscription is still valid.

• If the data is empty when you use to_date(?,'yyyy/mm/dd') insert a file into db

  online form insert the? is user input, if the user entered the following works find, but if the input file is empty insert get an error, how to handle
  If the data is empty when you use to_date(?,'yyyy/mm/dd')
  Thank you

  Be more specific.

  You try to insert this in a column that is defined as not null?

  If so, you can choose a default value for the value that you want to use if the user leaves the field to the white screen.

  Or, better yet, use the validation of the front to prevent them from going into an empty space (or perhaps failed it there).

  However, if you still want to do it in the DB:

  Insert into table1 (non_null_date_col)
  values (to_date (nvl (?, '' 2199/12/31), "dd/mm/yyyy"));

• When you use the adobe reader software

  When you use the adobe reader software, I can't open .pdf files to view using IE 10

  Adobe PDF Reader below your add-ons, and it is enabled?

• ORA-00902 error invalid data type when you use CAST in the PL/SQL Package

  I'm getting ORA - 00902 Datatype not valid error when you use cast in getEmpValues (see code below) method in the package I created.
  I don't know what is the cause of the error. Any help would be appreciated
  
  
  
  CREATE OR REPLACE PACKAGE TEST. TEST_PKG AS
  
  ARRAY TYPE MyTableType IS NUMBER;
  TYPE REF_CURSOR IS REF CURSOR;
  
  FUNCTION str2tbl (p_str IN VARCHAR2)
  RETURN myTableType;
  
  PROCEDURE getContactValues (p_ParameterString IN VARCHAR2, p_Cursor1 to REF_CURSOR);
  
  END TEST_PKG;
  
  
  
  CREATE OR REPLACE PACKAGE BODY TEST. TEST_PKG AS
  
  FUNCTION str2tbl (p_str IN VARCHAR2)
  RETURN myTableType
  AS
  l_str LONG default p_str | ',';
  l_n NUMBER;
  myTableType l_data: = myTabletype();
  
  BEGIN
  LOOP
  
  l_n: = INSTR (l_str, ",");
  WHEN the OUTPUT (nvl(l_n,0) = 0);
  l_data.extend;
  l_data (l_data.count): = ltrim (rtrim (substr(l_str,1,l_n-1)));
  l_str: = substr (l_str, l_n + 1);
  END LOOP;
  L_data return;
  END;
  
  /*
  p_ParameterString is a string of the form 3, 6, 8, 9'
  */
  
  PROCEDURE getEmpValues (p_ParameterString IN VARCHAR2, p_Cursor1 to REF_CURSOR)
  AS
  
  
  BEGIN
  
  
  OPEN FOR P_Cursor1
  
  SELECT *.
  FROM EMP
  
  WHERE EMP_ID IN (SELECT *)
  OF THE (SELECT CAST (TEST.) (TEST_PKG.str2tbl (p_ParameterString) as myTableType) double)
  
  );
  END getEmpValues;
  
  END TEST_PKG;

  ARRAY TYPE MyTableType IS NUMBER;

  This type must be created outside of the package as a SQL type if it must be used in a select statement.

• When you use the NI-CAN Transmit sample receive the same Harbor; can a virtual CAN channel (RCA or 257) be used?

  I work for a company that produces and transforms electric parts. We strive to get in remission at nine of the ECU, experiences, Instrument clusters etc. I'm trying to learn how to use LabVIEW to write commands and read the data on the CAN bus. I have downloaded the NI-CAN driver. I am currently 'play' with the same reception Port.VI show in the basic frame of the finder example API folder OR. I am not able to send the number in the data to write the table that it be read by the ncReadNet Mult .vi. When I put the parameter to 'Pending entries reading' the ncGetAttr.vi returns a 0 to indicate that there are no frames to read. As a result, the Mult.vi ncReadNet does not run.

  I don't have any connected equipment, I use the virtual CAN channel CAN256. Is this the reason why I can't get data frames in my queue for the Mult.vi ncReadNet to read?

  When you use the NI-CAN Transmit sample receive the same Harbor; can a virtual CAN channel (RCA or 257) be used?

  CAN carry 256 and 257 are connected to eachother through software.  When you write about 256, you can read the data on 257 and vice versa.  I think the example you mention is a writing and reading on the same port, but what you want is to probably to make a copy of this VI, in order to run two at once, where it opens 256 and the other opens 257.  Then, when you write one that you will see on the other.  I think you might be able to use the test panel CAN too read an and use the example of the other.

• Why Oracle ManagedDataAccess (4.121.1.0) throws a System.FormatException "first chance" exception to the debugger when you use OracleCommand.BindByName (on some machines, but not others)?

  Why Oracle ManagedDataAccess (4.121.1.0) throws a System.FormatException "first chance" exception to the debugger when you use OracleCommand.BindByName (on some machines, but not others)?

  This occurs when calling a ref cursor-returning packaged function stored with OracleCommand.BindByName set to true.

  When BindByName undefined, it works as expected.

  I've only been able to recreate this problem on a machine in my control. This issue has also reported to me by a customer.

  I tried to change the locale of the system of EN - UK EN-US, but I was not aware of any change in behavior.

  Similarly, I've tried explicitly overriding the default locale of the system with the OracleGlobalization parameters, and it also had no effect.

  Please see the example below.

  ---

  Environment (default):

  Windows 7 Professional 64-bit SP1

  Visual Studio 12.0.21005.1 REL / / CAN BE SIGNIFICANT

  .NET framework 4.5.51209

  Local system: EN - UK (but also does not, EN-US).

  Oracle.ManagedDataAccess 4.121.1.0

  "< supportedRuntime version ="v4.0"sku =". NETFramework,Version=v4.5.1"/ >

  Environment (base):

  Windows 7 Professional 64-bit SP1

  Updated Visual Studio 12.0.31101.00 //SEE above 4

  .NET framework 4.5.51209

  Local system: EN - UK

  Oracle.ManagedDataAccess 4.121.1.0

  "< supportedRuntime version ="v4.0"sku =". NETFramework,Version=v4.5.1"/ >

  Call stack:

  	mscorlib.dll. Unknown System.Number.StringToNumber(string str, System.Globalization.NumberStyles options, ref System.Number.NumberBuffer number, System.Globalization.NumberFormatInfo info, bool parseDecimal)
  	mscorlib.dll. Unknown System.Number.ParseInt32(string s, System.Globalization.NumberStyles style, System.Globalization.NumberFormatInfo info)
  	Oracle.ManagedDataAccess.dll! Oracle.ManagedDataAccess.Types.OracleRefCursor.OracleRefCursor (connection Oracle.ManagedDataAccess.Client.OracleConnection, OracleInternal.ServiceObjects.OracleRefCursorImpl refCursorImpl, Oracle.ManagedDataAccess.Types.OracleIntervalDS sessionTimeZone, string commandText, string paramPosOrName, long initialLongFS, long initialLobFS, long [] scnFromExecution) unknown
  	Oracle.ManagedDataAccess.dll! OracleInternal.ServiceObjects.OracleParameterImpl.ExtractRefCursorFromAccessor (Oracle.ManagedDataAccess.Client.OracleConnection conn, accessor OracleInternal.TTC.Accessors.Accessor, long fetchSize, Oracle.ManagedDataAccess.Client.PrmEnumType enumType, Oracle.ManagedDataAccess.Types.OracleIntervalDS sessionTimeZone, string commandText, string paramPosOrName, long longFetchSize, long lobFetchSize, long [] scnFromExecution, int currentRow) unknown
  	Oracle.ManagedDataAccess.dll! OracleInternal.ServiceObjects.OracleParameterImpl.GetRefCursorFromBytes unknown (Oracle.ManagedDataAccess.Client.OracleConnection conn, accessor OracleInternal.TTC.Accessors.Accessor, long fetchSize, Oracle.ManagedDataAccess.Client.PrmEnumType enumType, Oracle.ManagedDataAccess.Types.OracleIntervalDS sessionTimeZone, string commandText, string paramPosOrName, long longFetchSize, long lobFetchSize, long [] scnFromExecution)
  	Oracle.ManagedDataAccess.dll! Oracle.ManagedDataAccess.Client.OracleParameter.PostBind_RefCursor (connection Oracle.ManagedDataAccess.Client.OracleConnection, OracleInternal.TTC.Accessors.Accessor bindAccessor, long fetchSize, Oracle.ManagedDataAccess.Types.OracleIntervalDS sessionTimeZone, string commandText, string paramPosOrName, long longFetchSize, long lobFetchSize, long [] scnFromExecution) unknown
  	Oracle.ManagedDataAccess.dll! OracleInternal.ServiceObjects.OracleCommandImpl.ExtractAccessorValuesIntoParam (Oracle.ManagedDataAccess.Client.OracleParameterCollection paramColl, Oracle.ManagedDataAccess.Client.OracleConnection connection, string commandText, long longFetchSize, long lobFetchSize, long [] scnFromExecution) unknown
  	Oracle.ManagedDataAccess.dll! Unknown Oracle.ManagedDataAccess.Client.OracleCommand.ExecuteReader(bool requery, bool fillRequest, System.Data.CommandBehavior behavior)
  	Oracle.ManagedDataAccess.dll! Oracle.ManagedDataAccess.Client.OracleCommand.ExecuteReader (unknown)

  > ManagedSimpleRefCursor1.exe! NoddyConsole.Program.Command_ExecuteReader_BindByName_Fails (Line 63 c#)

  Example:

  ----

  using System;

  using System.Collections.Generic;

  using System.Linq;

  using System.Text;

  using Oracle.ManagedDataAccess.Client;

  using Oracle.ManagedDataAccess.Types;

  using System.Data;

  namespace NoddyConsole

  {

  public class Program

  {

  public static int Main (string [] args)

  {

  Error int = 0;

  Errors += Command_ExecuteReader_BindByName_Fails();

  Errors += UseReturnValue_Command_ExecuteNonQuery_BindByName_Fails();

  return errors;

  }

  public static int Command_ExecuteReader_BindByName_Fails()

  {

  Error int = 0;

  Try

  {

  var conn = new OracleConnection ("UID = USER; Password = PASS; ("Data Source = / / your-host: 1521 / yours-sid");

  var conn = new OracleConnection ("user Id = UNIT620; Password = UNIT620; ("Data Source = / / ln1apidb01:1521 / fm");

  Conn. Open();

  IRRELEVANT

  OracleGlobalization og is conn. GetSessionInfo();

  og. DateFormat = "HH24:MI:SS MON-DD-YYYY";

  Conn. SetSessionInfo (og);

  var cmd is conn. CreateCommand();

  cmd.CommandType = CommandType.Text;

  BindByName. cmd = true;

  cmd.CommandText = "START: rc: = SHAUN.recreate_issue_1 (in_code = >: in_code); END; « ;

  var prm1 is cmd. CreateParameter();

  PRM1. ParameterName = "rc";

  PRM1. Direction = ParameterDirection.ReturnValue;

  PRM1. OracleDbType = OracleDbType.RefCursor;

  cmd. Parameters.Add (prm1);

  / * SHAUN.recreate_issue_1 * /.

  var prm2 is cmd. CreateParameter();

  PRM2. ParameterName = "in_code";

  PRM2. Direction = ParameterDirection.Input;

  PRM2. OracleDbType = OracleDbType.Varchar2;

  PRM2. Value = "A";

  cmd. Parameters.Add (prm2);

  /* */

  var reader is cmd. ExecuteReader(); FAILS to System.Number.StringToNumber (String str, NumberStyles options, NumberBuffer & number, NumberFormatInfo info, Boolean parseDecimal)

  /* *-/

  OracleRefCursor orc = null;

  cmd ExecuteNonQuery()); must fail here

  ORC = cmd. Parameters ["rc"]. Value as OracleRefCursor;

  If (orc is nothing)

  throws InvalidOperationException new ("Invalid return the ref cursor type");

  var = orc player. GetDataReader();

  /* */

  While (reader. Read

  {

  var values = new object [reader. FieldCount];

  drive. GetOracleValues (values);

  for (int i = 0; i < values.) Length; (++ I)

  {

  Console.WriteLine(values[i]);

  }

  }

  drive. Dispose();

  cmd. Dispose();

  Conn. Dispose();

  }

  catch (Exception ex)

  {

  Console.Error.WriteLine (ex) Message);

  Errors ++;

  }

  Finally

  {

  Return (true);

  }

  return errors;

  }

  public static int UseReturnValue_Command_ExecuteNonQuery_BindByName_Fails()

  {

  Error int = 0;

  Try

  {

  var conn = new OracleConnection ("UID = USER; Password = PASS; ("Data Source = / / your-host: 1521 / yours-sid");

  Conn. Open();

  IRRELEVANT

  OracleGlobalization og is conn. GetSessionInfo();

  og. DateFormat = "HH24:MI:SS MON-DD-YYYY";

  Conn. SetSessionInfo (og);

  var cmd is conn. CreateCommand();

  BindByName. cmd = true; // ####

  cmd.CommandText = "START: rc: = SHAUN.recreate_issue_1 (in_code = >: in_code); END; « ;

  cmd.CommandText = "START: rc: = SHAUN.recreate_issue_2; END; « ; No params, works

  var prm1 is cmd. CreateParameter();

  PRM1. ParameterName = "rc";

  PRM1. Direction = ParameterDirection.ReturnValue;

  PRM1. OracleDbType = OracleDbType.RefCursor;

  cmd. Parameters.Add (prm1);

  / * SHAUN.recreate_issue_1 * /.

  var prm2 is cmd. CreateParameter();

  PRM2. ParameterName = "in_code";

  PRM2. Direction = ParameterDirection.Input;

  PRM2. OracleDbType = OracleDbType.Varchar2;

  PRM2. Value = "A";

  cmd. Parameters.Add (prm2);

  /* */

  var reader is cmd. ExecuteReader();

  OracleRefCursor orc = null;

  HERE does NOT cmd. BindByName = true; System.FormatException first-chance exception in at System.Number.StringToNumber (String str, NumberStyles options, NumberBuffer & number, NumberFormatInfo info, Boolean parseDecimal)

  cmd ExecuteNonQuery());

  ORC = cmd. Parameters ["rc"]. Value as OracleRefCursor;

  If (orc is nothing)

  throws InvalidOperationException new ("Invalid return the ref cursor type");

  var = orc player. GetDataReader();

  While (reader. Read

  {

  var values = new object [reader. FieldCount];

  drive. GetOracleValues (values);

  for (int i = 0; i < values.) Length; (++ I)

  {

  Console.WriteLine(values[i]);

  }

  }

  drive. Dispose();

  ORC. Dispose();

  cmd. Dispose();

  Conn. Dispose();

  }

  catch (Exception ex)

  {

  Console.Error.WriteLine (ex) Message);

  Errors ++;

  }

  Finally

  {

  Return (true);

  }

  return errors;

  }

  }

  }

  ---

  create or replace package THAT SHAUN is

  type ref_cur_type is ref cursor;

  function recreate_issue_1)

  in_code varchar2: = null

  ) return ref_cur_type;

  end SHAUN;

  /

  create or replace package body what SHAUN

  -TTS000233

  function recreate_issue_1)

  in_code varchar2: = null

  ) return ref_cur_type is ref_cur ref_cur_type;

  Start

  Open the ref_cur for

  Select UO.object_name from user_objects UO;

  Return ref_cur;

  end recreate_issue_1;

  end SHAUN;

  /

  ---

  Thanks a lot to qualify again for me Alex.  I'll try upgrading to the latest version of the provider.

  The difference in behavior between the two hosts was found to be reduced to differences in configuration VS.

  Checking 'Just my code' prevents the first chance thrown in the debugger exception. As in fact, the exception is handled in the provider, it is enough for me.