First 10 items goes very slowly on a PROJECT

I'm about at the end of my rope here, so I hope someone can help. I've been running first Elements 10 on my laptop for several years now and the project that I'm getting is so mired, I can't do anything, but there is nothing in this that I can suss out which explains why.

My laptop is a Dell XPS, processor i7-2630QM, Windows 7 (64-bit), 6 GB of RAM, NVIDIA GeForce GT 550 M.

I've never had a problem in the past. And, in fact, if I open the old projects, I don't have a problem now. It's just the project that I'm working on. If I move a clip, resize a clip, add a cache to a clip, whatever it is, the system failed for anywhere from 30 seconds to several minutes. If I play the timeline, it will go for a minute, then the preview stops with the audio continues, and I won't be able to stop it or to do anything else.

At first, I thought it was because a clip in the tray was an element of gameplay 1080 p for four hours, I went in my capture card software and broken up into four clips of long hours, which is in line with what I had in the past projects. Not fix her. I saw some people saying that images (png, jpg, etc.) can cause problems, so I removed most of the fixed frames. Did not help. Something about this project does not run, but I'm running out of ideas on where to look. Previous projects that are still working fine when I load them upward have roughly the same amount of images, but they are not bogged down like that. Does anyone have an idea what I'm looking for? Some things about some clips or the files in the location of project? No matter what? Settings?

Thanks in advance.

I'm surprised to hear that the first items 10 gave you problems with previous projects with excerpts of gameplay and MP4s as your video shakewell, source. As I said, version 10 is relatively primitive, as far as working with various video sources goes. Since version 11, the program is much more versatile. I don't even know if version 10 can change MP4s natively. You'd better turn your Canon AVCHD video - or one considering a move to a new version of the program.

Tags: Premiere

Similar Questions

  • Download Thunderbird is going very slowly then freezes before completing.

    I try to download Thunderbird and won't have a chance. The download starts, but it is going very slowly. After several minutes, he seems stuck around 2%. Then it slowly moves to 4%. I left it for an hour and he did not move from there. Any other download this same volume (28 MB) coming almost instantly. I have tried different browsers, different PCs, disabled antivirus (Windows Defender), empty the browser cache, and checked my specifications. The same thing happens again. A computer I tried is a Compaq Windows 8 with 2 GB of RAM and 1 GHz processor. The other is a Dell Windows 7 with 4 GB of RAM and 2.6 GHz processor. Both are x 64. Anyone else having this problem or knows how to solve? Is this a server problem or something wrong on my end? Thank you.

    https://drive.Google.com/file/d/0Bw-5UnM2oAFTWnVlMnNOX2tPT3M/view?USP=sharing
    I suppose you want the version en_US

  • My Windows 7 computer is going very slowly and I downgrade to Windows XP.

    Sir, I have a problem in my system. in fact my system does support windows 7, but I can install them. Now my system is going very slowly, and I want to install windows xp on my system. my main problem is the windows xp installation is going very slowly. After that the copy of windows cannot run the next installation. Please tel me what I can do in this State.

    I can install windows 7 cracked version

    original title: windows xp Setup error

    and my system is

    865 Board

    Intel pentium 3.0 CPU

    1 GB of ram

    hard disk of 80

    VGA 96 MB

    superdriver

    I m waiting 4 u & your response Mr

    If you have devices non-essential attached to the system, unplug them. Windows XP Setup may attempt to detect them.

    If you have more than one hard drive installed, disconnect all except the drive that you plan to install Windows XP on.

  • First Pro CC moving very slowly since the upgrade to 2015.3

    I've updated the other day to 2015.3 and nothing in trouble have since then. I tried uninstalling and reinstalling and even tried to go back to the 2015.2 version, but when I did I couldn't open one of my old projects. When I say that it moves very slowly, it is probably an understatement. It takes about nine minutes to open a project, and 8-9 minutes extra for video clips appear in the library. I'm on Windows 10 with a processor I7 with 16 G of RAM. I have never had any problems with first Pro CC in the past and like it, but this is crazy. So now, I have nine value terabyte of videos that I can't do something with and have eight days before the project is due. It would normally take me a few days to do what I'm trying to do, but at the rate he now travels would take me probably months. I hope I can find a fix quickly before I have to go to another editing software so that I can meet my deadlines.

    I found out with the help if you go into preferences, then to the media and uncheck the box "Enable accelerated h.264 decoding (reboot required) Intel" then he corrects this problem. So if you are shooting with a Sony or anything that uses AVCHD format, then you need to do.

  • Portege A100 suddenly started going very slowly

    Hello

    I have a Portege A100, which suddenly began to go very slowly. It takes 5 minutes to load completely upward when it was much faster. I tried to reload Windows on it several times, but as soon as you start loading other pieces of software on the speed significantly deteriorates.

    I also tried to use software to completely clean the hard drive before Windows on it but this does not solve the problem either.

    Any help would be much appreciated.

    Hello David

    I had a similar behavior on my old satellite 1900. At the end I checked the HARD drive and there are lots of bad sectors. At the beginning everything was OK, but after the installation of a few different satellite applications was slower and slower.

    In the end, I switched HDD and everything was OK again. I recommend you to check the HARD drive to see if there are some bad sectors. If so buy new HARD drive. Repair of sector help much.

  • After being off for ten days, MBP is going very slowly

    Hi all

    During the festive period, that I have done any work on computer and since then it is very slow and jerky when I opened a window, for example, get a black screen where the new window opens for a brief second.

    I also see the wheel that rotates a lot.

    I have the battery it also says replacement needs but its says that since about 2 years but I'm on 700 cycles.

    It is a MCP 13 "mid 2010, 8 GB RAM and 1 TB SSD.

    What do you make of all that?

    Stelios

    stylianous wrote:

    Hi all

    During the festive period, that I have done any work on computer and since then it is very slow and jerky when I opened a window, for example, get a black screen where the new window opens for a brief second.

    I also see the wheel that rotates a lot.

    I have the battery it also says replacement needs but its says that since about 2 years but I'm on 700 cycles.

    It is a MCP 13 "mid 2010, 8 GB RAM and 1 TB SSD.

    What do you make of all that?

    Stelios

    It may be that really need the new battery - or the battery that keeps the date and time.

  • LR is going very slowly with metadata

    After working with a few photos, change of name, address, etc... I closed LR and the next opening of LR will extremely slow. Goes image anotxer metadata one, change a few minutes after. Can someone help me?

    Please upgrade to the latest version of Lightroom 6.6.1

    See maintaining Lightroom to update to Lightroom.

    ~ Assani

  • 5.5 Flash is going very slowly. Tips to speed up?

    I do a hand drawn animation Flash 5.5 and now my program is going so slow, that it takes 3-5 seconds for the program to realize that I rubbed through frames. There is no virus running in the background scanner, my program is up to date and I wouldn't consider not so to speak the program "full." There is a little less than five seconds of the animation on doubles on the timeline.

    (Please note that I don't know much about Flash as a program. I do mainly animation frame-by-frame on a computer and that's it. Nothing complicated in this project.)

    Any help would be appreciated. : )

    Create a new directory and save your fla (with a new name) in this directory.  Restart your computer and then open this new fla in flash cs 5.5 and see if it behaves better.

  • WMP12 loading tracks very slowly

    I just built my first computer and WMP12 very slowly works to fill the library with my songs.

    I have about 17,000 or 180 GB of music and it can take up to an hour to fully load all. My music is stored on my 2 TB HARD drive, my OS is on a 120 GB SSD. Occasionally when loading, WMP to crash and tell me that some plug-ins could not initialize and open again, it loads a lot faster. I tried to find ways to uninstall or remove plug-ins but can't.

    I already tried to uninstall/reinstall WMP, I cleared the cache and delete temporary files. I really like WMP for its user interface and don't want to leave, but at this rate, I'll probably.

    I use Win 7 64 bit.

    Hi Matthew

    I see that your Q has not had a response yet, so try to make a difference...
    Can I have just a clarification: you say that WMP12 very slowly working to fill the library with my songs - is what happens whenever you start wmp... for an initial population 1 hour doesn't sound too bad, but if it happens every time - is not good!

    I'm sure (that you built the computer) your library settings are correct (in wmp under 'organize'-'manage libraries'), then maybe there's some files associated with wmp requiring correction. Try the tools two MS listed in my reply on this thread...

    http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-pictures/Windows-Media-Player-not-installed-properly/73897943-3707-4c10-98d1-66b62c28f074

    At least it gets you back on page 1!

    Regards R

  • Responds very slowly. I get an error no longer - unresponsive Script / Message CAUSE: McAfee

    In the last week or so, my Thunderbird account began to go very slowly and displays a message at the top - is unresponsive.
    The program then hangs or I have to stop him going out.
    It worked well for the first two months, but for some reason that it started his.
    I'm not very computer and to my knowledge have not changed the settings on the computer.
    I used Mozilla since Netscape has been abandoned and did not have this kind of problem before. Firefox seems to work very well.
    Any help will be greatly appreciated.

    Sounds like a lot of McAfee antivirus

    See https://wiki.mozilla.org/Thunderbird: test: Antivirus_Related_Performance_Issues #Solutions_for_Antivirus_Software

  • Satellite Pro A10 with XP SP2 works very slowly

    I have a Satellite Pro A10; 256 RAM with 18 GB of HARD drive. (In think it was sold as a nominal 20GB).
    It's not particularly loaded with the software, even if the HD is about 90% full and is used primarily for surfing the Internet and word processing. It runs very slowly and has been making slower and slower.

    Click on an item oin the Start Menu, for example to open IE and takes literally 10 to 20 minutes to open the window under construction very slowly... really!

    I have Norton Internet Security and Norton System Works and the different uses do not find anything wrong, they report. Speed disk to run after a month, but also the system scans for viruses.

    I'm going back to the top upgrade RAM 1024 and also believe that a BIOS update is available but do not know how this will change the performance, or not at all.

    I know there must be other things I need to do to improve the speed. It is virtually unusable at the moment.

    What tests can I do to pin point problems and then how can I fix?

    Hello

    In recent years, I've used the Norton Internet Security and I was not satisfied. The point is that it is a good security tool, but it significantly slows down the performance of the computer laptop or computer. Now, I m using the freeware antivirus software called AntiVir.

    I see your computer laptop support only 256 MB of RAM. It is certainly not sufficient to use the Win XP smoothly.
    Other reasons could be overloaded HDD.

    Due to the low value of RAM, the laptop uses the area on the HARD disk for paging. Paging is an important part of virtual memory. It allows to use the HARD drive for data that does not fit in physical RAM.

    All of these are responsible by the performance of your laptop.

    By the way; It is perhaps also a time for a new installation of the OS.

  • Hey, so I just bought first 13 items and I downloaded the installation file and spoke to install, but it is stuck at 2%

    I just bought first 13 items and I downloaded the installation file and spoke to install, but it is stuck at 2% on installation.

    It then comes up with the error screen but I click on details, and he said: there is no Web page, I have restarted my computer, removed other Adobe products, I don't know what to do d:

    I tried lot D:

    He's going to tell me what IS the error that I have for it either... so I can check to fix D: said that there is no Web page...

    alexas

    Thanks for the reply.

    You just solved your problem. If not all, basically everything. You need 64-bit installation files for your 64-bit computer.

    You need two installation files - for extracting .exe and .7z the program itself. These two files have 64 in the name of the file if each is to be used in a 64-bit system.

    If you have purchased serial number...

    a. you can go after the series of 64-bit installation files where you are

    or

    b. downloading 64-bit from the following location and insert your serial number purchased by them during the installation.

    http://prodesigntools.com/Photoshop-elements-13-direct-download-links-premiere.html

    Important... carefully perform the ' Note: very important "on this web site in order to avoid the access denied Message. Don't forget: you are using the trip to Adobe mentioned must be authenticated, you use the web site for the 1 (.exe) file links and file 2 (7z).

    or

    Try download from c.

    http://www.Adobe.com/downloads/other-downloads.html

    Please let us know if your observation was the key to the solution.

    Thank you.

    RTA

  • where can I download first 12 items

    Hi, I'm going in the rings trying to fine first elements 12 download. I can only fine V13. I formatted my computer and can't seem to find how to get it back. I have the serial number here. If someone could help I would be very grateful

    Thank you

    Sue

    Swish123

    If you bought the first 12 items as a download online directly from Adobe, you should be able to get new files to install from the Adobe web site

    'My orders' where you find your specific order which should have an opportunity to download here or use Adobe following links for older versions

    Other downloads

    An another convenient way to go about this is to download and install the following elements 12 since the website first test files and then insert your serial number purchased in them.

    http://prodesigntools.com/Photoshop-elements-12-direct-download-links-premiere.html

    You must read and perform carefully the web page "Note: very Important Instructions" to avoid receiving an access denied message.

    Please let us know if everything above worked for you.

    Thank you.

    RTA

  • MacBook Pro (3-inches, mid-2012) suddenly started running very slowly; Beach balls very common

    About a week and a half, it started running very slowly with the spinning beach balls popping up all the time.  This reminds me of how when I have too many tabs of the browser as in the past, but now, even with browsers had closed, open Word or Skype is really slow.  (I'm sorry for any confusing formulation; I'm not very computer customer connected, unfortunately!)

    Some of the things I've tried so far and EtreCheck below):

    -safe mode

    -detection of hardware problems (control + D)

    -reset the PRAM

    -using the utility disc for repair/first care; also check

    -wipe the hard drive and reinstalling original OS X Lion (was still slow with beach balls; I tried to install OS X El Capitan to see if that would help, but installation could not finish)

    -wipe the hard drive and restarting from a backup previous (one month before the problems started)

    EtreCheck version: 3.0.3 (307)

    Report generated 2016-09-11 17:51:16

    Download https://etrecheck.com EtreCheck

    Duration 34: 39

    Performance: poor

    Click the [Support] links to help with non-Apple products.

    Click the [details] links for more information on this line.

    Problem: Beachballing

    Description:

    also very slow in general

    Hardware information: ⓘ

    MacBook Pro (13-inch, mid-2012)

    [Technical details] - [User Guide] - [warranty & Service]

    MacBook Pro - model: MacBookPro9, 2

    1 2.5 GHz Intel Core i5 CPU: 2 strands

    4 GB of RAM expandable - [Instructions]

    BANK 0/DIMM0

    OK 2 GB DDR3 1600 MHz

    BANK 1/DIMM0

    OK 2 GB DDR3 1600 MHz

    Bluetooth: Good - transfer/Airdrop2 taken in charge

    Wireless: en1: 802.11 a/b/g/n

    Battery: Health = Normal - Cycle count = 1054

    Video information: ⓘ

    Graphics Intel HD 4000

    Color LCD 1280 x 800

    System software: ⓘ

    OS X El Capitan 10.11.4 (15E65) - since startup time: less than an hour

    Disk information: ⓘ

    TOSHIBA MK5065GSXF disk0: (500,11 GB) (rotation)

    EFI (disk0s1) < not mounted >: 210 MB

    Macintosh HD (disk0s2) /: 499,25 go-go (349,39 free)

    Recovery HD (disk0s3) < not mounted > [recovery]: 650 MB

    HL-DT-ST DVD - RW GS31N)

    USB information: ⓘ

    Apple Inc. Apple keyboard / Trackpad

    Computer, Inc. Apple IR receiver.

    Apple Inc. BRCM20702 hub.

    Apple Inc. Bluetooth USB host controller.

    Apple Inc. FaceTime HD camera (built-in)

    Information crush: ⓘ

    Apple Inc. Thunderbolt_bus.

    Goalkeeper: ⓘ

    Mac App Store and identified developers

    Launch system officers: ⓘ

    [loaded] 6 tasks Apple

    [loading] 164 tasks Apple

    [operation] 68 tasks Apple

    Demons of launch system: ⓘ

    [loaded] 43 tasks Apple

    [loading] 161 tasks Apple

    [operation] 85 tasks Apple

    Launch officers: ⓘ

    [loading] com.google.keystone.agent.plist (2016-07-12) [Support]

    Launch of the demons: ⓘ

    [loading] com.adobe.fpsaud.plist (2016-06-29)

    [loading] com.google.Keystone.daemon.plist (2016-09-11) [Support]
    [loading] com Microsoft.Office.Licensing.Helper.plist (2011-03-10) [Support]

    Launch User Agents: ⓘ

    [loading] com.valvesoftware.SteamClean.plist (2016-05-14) [Support]

    Internet Plug-ins: ⓘ

    FlashPlayer - 10.6: 22.0.0.209 - SDK 10.9 (2016-07-22) [Support]
    QuickTime Plugin: 7.7.3 (2016-04-05)
    Flash Player: 22.0.0.209 - SDK 10.9 (2016-07-22) [Support]
    Default browser: 601 - SDK 10.11 (2016-04-05)
    o1dbrowserplugin: 5.41.3.0 - 10.8 SDK (2015-12-21) [Support]
    SharePointBrowserPlugin: 14.2.4 - SDK 10.6 (2012-10-03) [Support]
    googletalkbrowserplugin: 5.41.3.0 - 10.8 SDK (2015-12-12) [Support]
    Silverlight: 5.1.10411.0 - SDK 10.6 (2014-03-29) [Support]

    The internet user Plug-ins: ⓘ

    Web of Google Earth plugin: unknown (2013-01-24)

    The Safari Extensions: ⓘ

    AdBlock - BetaFish, Inc. - https://getadblock.com (2015-10-14)

    3rd party preference panes: ⓘ

    Flash Player (2016-06-29) [Support]

    Time Machine: ⓘ

    Mobile backups: WE
    Automatic backup: YES
    Volumes to back up:
    Macintosh HD: Disc size: 499,25 GB disc used: 149,86 GB
    Destinations:
    X. backup [Local]
    Total size: 999,86 GB
    Total number of backups: 7
    An older backup: 05/01/16 17:26
    Last backup: 28/08/16 23:43
    Size of backup drive: adequate
    Backup size 999,86 GB > (disc 149,86 GB X 3)

    Top of page process CPU: ⓘ

    11% Firefox
    4% kernel_task
    3% hidd
    2% sandboxd
    2% WindowServer

    Top of the process of memory: ⓘ

    1.00 GB Firefox
    457 MB kernel_task
    291 MB mdworker (15)
    143 MB mds_stores
    90 MB Microsoft Word

    Information about virtual memory: ⓘ

    36 MB Free RAM
    3.96 GB Used RAM (657 MB cache)
    0 B Swap used

    Diagnostic information: ⓘ

    Sep 11, 2016, 16:37:21 Self test - passed
    Sep 11, 2016, 09:20:57 ~/Library/logs/DiagnosticReports/suggestd_2016-09-11-092057_[redacted]. Crash

    /System/Library/PrivateFrameworks/CoreSuggestions.Framework/versions/A/support/s uggestd

    Thank you in advance for your answers - I'm just at a loss for what could be the real problem!

    You Mbps HARD drive is suspect.  Start the recovery (COMMAND-R) partition and select in menu 4 disk utility.  Run disk utility > first aid > repair.

    Unrelated, but your battery has seen a lot of use.  I suggest to replace.

    Ciao.

  • A few days ago, Google started to load very slowly in Firefox, but not Safari

    I have Firefox 13.0.1 on Mac OS X. A few days ago Google pages implemented very slowly (taking a few minutes to perform a search or open Gmail). I've had no problem with Safari - Google pages loading instantly here. And the ONLY site that I have problems with the Firefox Google. I tried to clear my cache as someone suggested. That did not work. I tried to disable my extensions and plug-ins, but that did not help either more. Any ideas? Thanks in advance.

    I found the solution to my problem in another thread: https://support.mozilla.org/de/questions/928182#answer-339386

    About: config, I changed 'network.http.keep - alive' to 'true' and now Google works very well. I don't know what caused the problem in the first place, but that fixed it for me.

Maybe you are looking for

  • sr5717uk power

    Hi guys, I want to update a SR5715UK system with a better video card. I opted for the card (Nvidia GeForce 9400 GT with 1 GB ram) but I need to know what size power supply works with these systems... the map requires 450 w that minimum, any body got

  • Satellite 1000 emits 4 times and goes no further

    Anyone know what it means when, after start-up, an S1000 emits 4 times and goes no further. I guess it's a hardware failure, but generally the number of beeps will indicate it has not - that's what I need to know. Thank you

  • Cannot hear or talk on calls after update

    I've updated my phone this morning and now I can't hear or talk on calls.   Does anyone else have this problem and if so how do solve you?

  • HP Photosmart C4100 ModelC4180: hard drive

    I up graded and need to dispose of this printer and need to know if it has a hard drive that I need to get out, so that no one can get my personal information that I had copied and printed on it.

  • Driver HD 550v

    I have the N5010. I updated my drivers to the most recent available on dell support/drivers page, but the latest driver for HD 550v is dated June 2010.All the games that I play keep me by saying that the graphics driver is outdated.I have searched fo