Data being read empty CD.

Similar Questions

• restore data on lexar memory stick (I removed dangerously, it now reads empty - AGGG)

  new lexar folding MemoryStick

  I removed w/out 'Remove' as it was in a computer that had been dead, and I couldn't get it to power upward.

  When I inserted in another computer Lexar now reads "empty" which means I lost?  all the data?

  Someone knows how to rejuvenate it? Correct that I broke?

  Hello

  Perhaps this will help you get back them.

  Recuva - free - recovers files deleted from your Windows computer, Recycle Bin, digital
  map of the camera or MP3 player. And it's free!
  http://www.Piriform.com/Recuva

  Forums - help here
  http://Forum.Piriform.com/

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Cannot open the terminal failures of the file 'C\:HP\DATA\HP. DAT' to read.

  I've just updated my bios on my HP Pavilion g6-2102au Notebook PC.

  I had continuous multi color screens, thought it was overheating but not so much.

  I installed the latest version of the bios and it seems to have worked? having had a twinkle while writing

  This.

  My query is to start up when he started I get this message and I said OK

  Terminal Failute cannot open the file 'C\:HP\DATA\HPLB. DAT' to read.

  This is the message that someone help me get rid of it

  See you soon

  shiner2348

  Hi @shiner2348,

  Thank you for your inquiry.

  I understand that you receive the error message "Terminal failure cannot open the file"C\:HP\DATA\HPLB. " DAT' to read '.

  This is a reference to the launch of HP software box.    I suggest to uninstall and then restart your laptop.

  If you want to keep this app I suggest that you try to download it and install it using compatibility mode.

  Here are links to help you in this process:

  Compatibility mode

  HP launch box Windows 8

  Please let me know the results.

  
  

  Thank you for your participation in the Forums of HP! We want to help you as well as others who may encounter a similar problem as you. Please consider tagging the post in order to solve your problem as "accept as Solution" to help other members of the community!

  To show recognition for my efforts please click the Thumbs Up below.

• Outlook Express 6: "Message was deleted without being read? (2)

  (Note: I posted this above subject in the Internet Explorer 8 Forum forgetting that Outlook is a desktop application.)  Apologies!)

   

  Hello;

   

  1) I recently received the following response to a serious investigation (Outlook Express 6):

  ... "Your message

  ........ To: ****

  ........ Topic: laptop... Sales

  ........ Sent: Fri, * Mar 2011 *.

  .... was deleted without being read on "Lun, *"

   

  2) I don't know how we could generate this message!

  If the recipient received the e-mail and read it and "didn't like it" or decided "not to answer', or the message was just displayed on the monitor and the recipient has not actually read the entire message and remove it, can it still send an auto-reply saying:

  "... your message was deleted without being read?

  It makes no sense! or does?

   

  3) however, if I add the email address of the sender to the "blocked senders" list, I continue to receive e-mails, but that they would go directly to the folder "deleted items", I can still read if I want, or delete them permanently from the system.

  The sender blocked in this case (any) would receive an automatic response: "... your message was deleted without being read?

  I have no way of knowing!

   

  Could someone please clarify?

   

  Thank you kindly.

  Monir  

  Then again for the third time:

  If you have sent a message to someone with a program bouncing what they consider spam, you can get a response like that.

  MailWasher has capabilities of rebound, but I don't know if it's their message or someone else. It is certainly not from OE.

• terminal failure: can't open 'C\HP\Data\HPLB\HPLBHP. DAT ' to read '.

  terminal failure: can't open 'C\HP\Data\HPLB\HPLBHP. DAT 'for reading,

  Al enceder pone of Kise mi Máquina este problema tengo than dar aceptar para as jale, than I can acer?

  HP Pavilion Notebook PC g4-1354-AI

  Hi @jaro1234 ,

  Welcome to the HP Consumer Forum English!

  If you prefer to post your question in the language of your choice, see the options that are available below.
  German: HP Kundenforum
  Spanish: Foro of HP users
  French: Forum users
  Portuguese: Forum back HP users
  Chinese: 惠普个人客户支持论坛
  Korean: HP 지식커뮤니티

  Otherwise, feel free to post a message in English.

• What best practices to remove a host server data store without emptying the contents of the data store

  Hi all

  This question was probably asked a million times. the best practice to remove a host server data store without emptying the contents of the data store?

  I have two clusters and I moved host group A to group B. host A is now to see data from Cluster Both A store and Group B datastore. We want that host A to store data in Cluster B. The Cluster a data store is not and can not be empty coz VM A Cluster using data warehouses. So I just unpreset the data LUN to host A store and Reanalyze the data store? Or there is a better way to do it?

  Thank you all

  Yes that's what I meant - should have specified where virtual machines are running.

• Enter data into the empty cell inserts the invalid main character

  When I enter data in an empty cell, for example 1 in a column, and then click validation I get the error ORA-01722: invalid number. Although I do not see the character in front of the 1 I use RIGHT twice after reaching HOME in this cell to get the cursor to the right of the 1, if a character appeared in front of the 1. Hit the BACKSPACE deletes the invisible character, and now I can commit the data entered.
  
  The same thing seems to happen when you remove a date using backspace in a date column. The use of return back once led to an error "ORA-01858: a non-digit character was found here where was waiting for a digital". I have to use the BACKSPACE again to get the empty cell.
  And the same thing happens in a varchar column too, although sometimes when he gets that space seems to be inserted in front of the text I entered, but this space is visible only when the cursor is not in the cell.
  
  What causes this? Bug in the developer SQL, SQL Developer settings, settings of the keyboard, something else?
  
  (Oracle SQL developer 3.1.0.7 64bits)

  This is a bug and has been fixed for the next version.

  Brian Jeffries
  SQL development team

• Read empty return Sets

  All,

  I have the code attached to a loop of a VI.  I run this code about once per millisecond during tests (~ 30 sec) short.  She usually works well, but sometimes read funtion returns an empty array.  When she did this, 'AvailSampPerChan' returns 0.   Why would he do that?  Should not be expected samples available before reading?  Is there a simple way to stop this and wait for the samples to be filled?

  It is not return an active error when this happens.

  System Specs:

  Acquisition of data USB-6009 8 lines AI at a sampling frequency of 3000 s/s of reading.

  Any help would be greatly appreciated.

  No, you really should have the Schedule VI.  Otherwise your DAQ is served only when you ask in the software.  If you really need the 3kS/s, it must be hardware timed and keep the value of the samples.

  What determines your rate of loop for when you read the DAQ data?  Think you can try to obtain data more often than the data actually happens.  You say you're looking for data on every 1ms.  At a rate of 3kS/s, you should have 3 samples available.  But that's assuming only 1 channel.  The heat flow is actually samples/channel/second.  Thus a full analysis will be in 8s /(3kS/s) = 2.7ms.  You try to read these data too quickly.  Slow down your loop.  Or set the frequency of sampling to 24kS/ml/s.

  Or say that the DAQmx read to get X samples when you try to read the data.  As I said earlier, the default value is simply enter all available data (- 1).  If there is no data, you get no data.  However, if you specify a number of points to read the DAQmx Read, he will wait that number of samples coming.

• Data acquisition reading incorrect when you use a loop

  Hello

  I wrote a simple VI (00, 01, 10, and 11) output to a circuit connected with 4 resistors. Based on what value the ciruit receives, it passes current through a particular resistance. It is again entered in Labview and traced.

  The problem is when I send a particular value (i.e the 00, 01 and 10 and 11) and get that back, it's okay. But when I send and receive the consectively connected via the loop counter, they are incorrect (not synchronized with the number of the loop).

  I made sure that circuit works very well. It has something to do with the loop synnchronization, reset, value compensation, etc. can be.

  Please Guide...

  Change your DAQ assistant that reads to be 1 sample on request.

  Right now it is set for continuous samples.  And 10 samples at 10 Hz.  Then it runs and starts.  The next iteration, you send a new digital out, but the wait for 4 seconds.  When you read again, you get the next 10 samples that are put into the buffer of data acquisition, but now 40 samples have actually entered the DAQ buffer.  In time your DAQ buffer will be finally complete and raise an error.  In the meantime, you will continually read data continues to become more tainted by the iteration.

• sending data and reading

  Well guys, I have a problem sending data here.

  When I did which is left in a loop, it works!

  But when I did what is the Chief while loop, I received a large number of values of fools.

  

  Could someone help me on this?

  The second loop, I had only a few simple calculations for the example. So don't you worry with math or anything so.

  In the logic... the good is that I receive the correct value in table annexed bouth. The only thing that will change is 3 last numbers!

  If anyane can help me on this, I'll be happy!

  EduU wrote:

  Well guys, I have a problem sending data here.

  When I did which is left in a loop, it works!

  But when I did what is the Chief while loop, I received a large number of values of fools.

  This is because you have a status of critical competition due to your use of local variables. In the second loop, the instance of the local variable is read before you actually wrote the new value of the indicator. You can browse this thread.

• Data not read with custom data Plugin

  Hello

  I am trying to install a plug-in to read our data format custom at the request of the binary data.  Following the instructions of the software plugin SDK, I wrote the code to read the header and data to our format and it works using the test/debugging included screws withn the SDK.

  Unfortunately, when I compile and install the plugin and try to access my data in tiara, while individual channels are created successfully, they contain all the data.

  I've attached a zip file with all of the relevant files, would be grateful if someone could take a look and see if they can find something wrong.

  Thank you

  Shahrukh Alavi

  National Research Council of Canada

  Hi Shahrukh,

  The status bar and the error message often suggest a failure in loading the last parts of the string values.

  We can use create use exit File.vi to debug our code.

  The data file seems to have 7 channels, each has 40282 data points. So I value Offset 40280 and number of Points by the error buffer 2 and got 4 "end of file encountered." in PB_Data.vi. Would it be one of the following reasons?

  1. number of data points (wavelength) is not correct.

  2. the calculation of offset in file is not correct.

  Mavis

  

• Data channel read name DAQmx without installed DAQmx

  We have data files, including a header with the names of channels in the DAQmx channel name format.

  Now, we want to send a Labview application to our customer by which they can open these files and just seeing the names of channels in the form of text. Can we make such an application without requiring the customer to install DAQmx. We use Labview 7.1.1 and after installing the application, it asks for nivaiu.dll, nipalu.dll nipalut.dll and so on. Change the simple arrays of strings file header gives compatibility on old data problems.

  Concerning

  Dan Larsson

  Problem solved!

  Control of channel name DAQmx can serve as a binary file read model without installing DAQmx separately. I found a Subvi calling "DAQmx unflatten string. After the removal of this call everythings working.

  Sorry for all you mind!

  / Dan

• merger acquisition of data to read input data 2 or several at once

  Hi all

  I'm using or usb-6009 more then 2 incoming signals.

  the problem is that I can't read 2 signals at the same time. 1 my daq assistance will be apeared to be error.

  so, how can I set the .vi (attached) so that he could read 1 more signal since the acquisition of data?

  I also tried to separate daq support but error. I also try to merge the two signals with a different port (a1 and a0)

  can anyone help?

  Thnx for the reply

  Frankly, I went through all the tutorials and looked for answers in the forum and the conclusions I have difficulties to understand the technical language... I have been looking for everywhere labview users and found someone who could guide me carefully... im have desperately need guidance... not to give up hope trying to find the answer, but a sort of feedback that is giving advice that you need to take the driver's seat... FYI... I take the driver's seat... that look like a real Nubian now needs help...

  is there any order step by step so that I could add channels more 1 1 daq help?... I've done it before, but it occurs.

  for example, I want to create channel 1 to read the value of the resistance and channel 2 for playback of tension... but what happened when I create more than 2 channels, it is be will configure this channel only 1 located in the block diagram... both channal will give only data for the value of the resistance.

  Sorry for my broken English.

• Office toolkit 'excel get data' cannot read anything else of integers?

  I use LabVIEW 2009 and can not get LabVIEW to read non-entiers to a worksheet.  In the attached example, I put a breaktpoint after the new report vi, and and when it hits at this breakpoint I put a number as 1,234 in cell A1, and then continue execution.  But the 'data' outputs always return an integer value.  Even tried to change the format of the output of the data field.  I also tried to replace this with vi (LDM) Excel Get Data in the folder of the Toolbox, but got the same result.

  When I tried the same thing in LabVIEW 8.0 it worked.  No idea what I am doing wrong?  :-)

  Thank you

  -Bill

  Your meter is complete after you have changed the type of indicatpr, then you can get good results.

• define a data type (read binary)

  Hello

  I want to read a file GET TRC and fight with its data type, I know that I can put a cluster in the entry of the data on a "read the binary" type, but I don't know how it actually works, it's what I have:

  I have a definition of the TRC header file:

  offset: 0, label: patient info, data type: char, description: patient information

  offset: 32, label: recording information, data type: char, description: recording information

  offset: 64, label: acquisition unit, data type: Unsigned long, description: device type

  etc...

  Above is an example (a fake), because I can not give the description of file structure, this specific file...

  So my question is: how would you define a data type cluster that could read binary files and lectures we love exactly this way?

  Or it only works with files saved as a structure for labview? For example, a cluster?

  Best regards

  Thijs Boeree

  ThijsBoeree wrote:
  Hi, I'm on my way back now, so I'll check the first thing in the morning. I thought about it and he came to the conclusion that I might need to do a painting of a cluster with an offset, length (County) and different types of data and run in a loop of fror to load the binary file for reading and the position of the file 'set' to recover data and afterwards put them in a well-defined place cluster!
  But maybe you have the same solution...

  You can do this, but of course you can't auto-index different types of data in a table. But you could fill the cluster directly in the loop for.